! Started logfile: J0410+7656_S_2006_02_23_yyk_uvs.log on Wed Jul 5 11:20:32 2006 obs J0410+7656_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0410+7656_S_2006_02_23_yyk_uva.fits ! AN table 1: 883 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.989933 visibilities/baseline/integration-bin. ! Found source: J0410+7656 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2429 lines of history. ! ! Reading 157340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0410+7656_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.21272 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=10.11 mas, bpa=1.447 degrees ! Estimated noise=1.17892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.627436 Jy ! Component: 100 - total flux cleaned = 0.924829 Jy ! Total flux subtracted in 100 components = 0.924829 Jy ! Clean residual min=-0.142472 max=0.253542 Jy/beam ! Clean residual mean=0.002701 rms=0.055674 Jy/beam ! Combined flux in latest and established models = 0.924829 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.924829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.820763Jy sigma=15.829357 ! Fit after self-cal, rms=0.819132Jy sigma=15.804219 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=10.61 mas, bpa=1.391 degrees ! Estimated noise=0.686073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.332086 Jy ! Component: 100 - total flux cleaned = 0.513404 Jy ! Component: 150 - total flux cleaned = 0.630853 Jy ! Component: 200 - total flux cleaned = 0.708136 Jy ! Total flux subtracted in 200 components = 0.708136 Jy ! Clean residual min=-0.193273 max=0.378685 Jy/beam ! Clean residual mean=0.006106 rms=0.078221 Jy/beam ! Combined flux in latest and established models = 1.63297 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 1.63297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.716885Jy sigma=13.715676 ! Fit after self-cal, rms=0.714685Jy sigma=13.696579 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.14 x 10.61 at 1.391 degrees (North through East) ! Clean map min=-0.18865 max=0.78779 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.718184 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.71 HN 2.00 KP 1.18 ! LA 0.83 MK 2.32 NL 2.00 OV 1.41 ! PT 0.77 SC 1.80 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.672221 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.74 HN 1.80 KP 1.24 ! LA 0.80 MK 2.57 NL 2.13 OV 1.50 ! PT 0.74 SC 2.43 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.515578 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.77 HN 1.33 KP 1.30 ! LA 0.64 MK 2.52 NL 2.74 OV 1.52 ! PT 0.81 SC 6.75 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.589499 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.77 HN 1.20 KP 1.15 ! LA 0.55 MK 2.02 NL 2.60 OV 1.21 ! PT 0.72 SC 5.74 ! ! ! Fit before self-cal, rms=0.714685Jy sigma=13.696579 ! Fit after self-cal, rms=0.702688Jy sigma=40.428252 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.702688Jy sigma=40.428252 ! Fit after self-cal, rms=0.710230Jy sigma=40.371366 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.878 mas, bmaj=10.3 mas, bpa=6.76 degrees ! Estimated noise=0.281776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.727104 Jy ! Component: 100 - total flux cleaned = -0.922063 Jy ! Component: 150 - total flux cleaned = -1.00083 Jy ! Component: 200 - total flux cleaned = -1.03354 Jy ! Total flux subtracted in 200 components = -1.03354 Jy ! Clean residual min=-0.049058 max=0.096015 Jy/beam ! Clean residual mean=0.001278 rms=0.021904 Jy/beam ! Combined flux in latest and established models = 0.599423 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 73 components and 0.599423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486125Jy sigma=11.752593 ! Fit after self-cal, rms=0.485284Jy sigma=11.744666 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.485284Jy sigma=11.744666 ! Fit after self-cal, rms=0.484380Jy sigma=11.699997 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149561 Jy ! Component: 100 - total flux cleaned = -0.017132 Jy ! Component: 150 - total flux cleaned = -0.0176758 Jy ! Component: 200 - total flux cleaned = -0.0182083 Jy ! Total flux subtracted in 200 components = -0.0182083 Jy ! Clean residual min=-0.050792 max=0.096359 Jy/beam ! Clean residual mean=0.001449 rms=0.021787 Jy/beam ! Combined flux in latest and established models = 0.581215 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.581215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.483571Jy sigma=11.664594 ! Fit after self-cal, rms=0.483344Jy sigma=11.662737 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.878 x 10.3 at 6.76 degrees (North through East) ! Clean map min=-0.050096 max=0.39931 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.483344Jy sigma=11.662737 ! Fit after self-cal, rms=0.378856Jy sigma=10.132471 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378856Jy sigma=10.132471 ! Fit after self-cal, rms=0.378902Jy sigma=10.132393 ! Inverting map and beam ! Estimated beam: bmin=5.54 mas, bmaj=11.26 mas, bpa=10.22 degrees ! Estimated noise=0.274957 mJy/beam. ! Added new window around map position (22, 12.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0779327 Jy ! Component: 100 - total flux cleaned = 0.0871784 Jy ! Component: 150 - total flux cleaned = 0.0844173 Jy ! Component: 200 - total flux cleaned = 0.082077 Jy ! Total flux subtracted in 200 components = 0.082077 Jy ! Clean residual min=-0.038185 max=0.043429 Jy/beam ! Clean residual mean=0.000291 rms=0.015331 Jy/beam ! Combined flux in latest and established models = 0.663292 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 111 components and 0.663292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347370Jy sigma=8.385501 ! Fit after self-cal, rms=0.343756Jy sigma=8.177695 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343756Jy sigma=8.177695 ! Fit after self-cal, rms=0.208712Jy sigma=7.254794 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208712Jy sigma=7.254794 ! Fit after self-cal, rms=0.208700Jy sigma=7.254447 ! Inverting map and beam ! Estimated beam: bmin=5.153 mas, bmaj=11.62 mas, bpa=7.446 degrees ! Estimated noise=0.259961 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0720312 Jy ! Component: 100 - total flux cleaned = 0.0821357 Jy ! Component: 150 - total flux cleaned = 0.0853408 Jy ! Component: 200 - total flux cleaned = 0.0853582 Jy ! Total flux subtracted in 200 components = 0.0853582 Jy ! Clean residual min=-0.037628 max=0.045541 Jy/beam ! Clean residual mean=0.000928 rms=0.013774 Jy/beam ! Combined flux in latest and established models = 0.74865 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 59 model components to the UV plane model. ! The established model now contains 166 components and 0.74865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187368Jy sigma=5.751426 ! Fit after self-cal, rms=0.185753Jy sigma=5.613464 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=15.7 mas, bpa=34.12 degrees ! Estimated noise=0.285202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197061 Jy ! Component: 100 - total flux cleaned = 0.0217089 Jy ! Component: 150 - total flux cleaned = 0.0233777 Jy ! Component: 200 - total flux cleaned = 0.0238846 Jy ! Total flux subtracted in 200 components = 0.0238846 Jy ! Clean residual min=-0.041553 max=0.056210 Jy/beam ! Clean residual mean=0.000993 rms=0.016089 Jy/beam ! Combined flux in latest and established models = 0.772535 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 185 components and 0.772535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185709Jy sigma=5.456297 ! Fit after self-cal, rms=0.184813Jy sigma=5.433781 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=9.995 mas, bpa=2.748 degrees ! Estimated noise=0.596124 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.287447 Jy ! Component: 100 - total flux cleaned = 0.424266 Jy ! Component: 150 - total flux cleaned = 0.51025 Jy ! Component: 200 - total flux cleaned = 0.572817 Jy ! Total flux subtracted in 200 components = 0.572817 Jy ! Clean residual min=-0.047884 max=0.051442 Jy/beam ! Clean residual mean=0.000607 rms=0.015910 Jy/beam ! Combined flux in latest and established models = 0.572817 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.572817 Jy ! Inverting map and beam ! Estimated beam: bmin=5.153 mas, bmaj=11.62 mas, bpa=7.446 degrees ! Estimated noise=0.259961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840418 Jy ! Component: 100 - total flux cleaned = 0.125455 Jy ! Component: 150 - total flux cleaned = 0.141709 Jy ! Component: 200 - total flux cleaned = 0.151795 Jy ! Total flux subtracted in 200 components = 0.151795 Jy ! Clean residual min=-0.039661 max=0.041862 Jy/beam ! Clean residual mean=0.000954 rms=0.013883 Jy/beam ! Combined flux in latest and established models = 0.724612 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 113 components and 0.724612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.04 mas, bmaj=15.7 mas, bpa=34.12 degrees ! Estimated noise=0.285202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00883441 Jy ! Component: 100 - total flux cleaned = 0.0129401 Jy ! Component: 150 - total flux cleaned = 0.0173081 Jy ! Component: 200 - total flux cleaned = 0.0198806 Jy ! Total flux subtracted in 200 components = 0.0198806 Jy ! Clean residual min=-0.045219 max=0.053678 Jy/beam ! Clean residual mean=0.001158 rms=0.016191 Jy/beam ! Combined flux in latest and established models = 0.744492 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 0.744492 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.153 mas, bmaj=11.62 mas, bpa=7.446 degrees ! Estimated noise=0.259961 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103086 Jy ! Component: 100 - total flux cleaned = 0.00233641 Jy ! Component: 150 - total flux cleaned = 0.00481972 Jy ! Component: 200 - total flux cleaned = 0.0066256 Jy ! Total flux subtracted in 200 components = 0.0066256 Jy ! Clean residual min=-0.036929 max=0.045817 Jy/beam ! Clean residual mean=0.000785 rms=0.012687 Jy/beam ! Combined flux in latest and established models = 0.751118 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 156 components and 0.751118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179770Jy sigma=5.314516 ! Fit after self-cal, rms=0.179094Jy sigma=5.289939 wmodel J0410+7656_S_2006_02_23_yyk\_map.mod ! Writing 156 model components to file: J0410+7656_S_2006_02_23_yyk_map.mod wobs J0410+7656_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0410+7656_S_2006_02_23_yyk_uvs.fits wwins J0410+7656_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J0410+7656_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114058 Jy ! Component: 100 - total flux cleaned = 0.00738422 Jy ! Component: 150 - total flux cleaned = 0.00382637 Jy ! Component: 200 - total flux cleaned = 0.00290873 Jy ! Component: 250 - total flux cleaned = 0.00457364 Jy ! Component: 300 - total flux cleaned = 0.00535818 Jy ! Component: 350 - total flux cleaned = 0.00644284 Jy ! Component: 400 - total flux cleaned = 0.00745784 Jy ! Component: 450 - total flux cleaned = 0.00874228 Jy ! Component: 500 - total flux cleaned = 0.00966311 Jy ! Component: 550 - total flux cleaned = 0.0117211 Jy ! Component: 600 - total flux cleaned = 0.0122901 Jy ! Component: 650 - total flux cleaned = 0.0133682 Jy ! Component: 700 - total flux cleaned = 0.014154 Jy ! Component: 750 - total flux cleaned = 0.0141537 Jy ! Component: 800 - total flux cleaned = 0.0129325 Jy ! Component: 850 - total flux cleaned = 0.0126918 Jy ! Component: 900 - total flux cleaned = 0.0124502 Jy ! Component: 950 - total flux cleaned = 0.0124438 Jy ! Component: 1000 - total flux cleaned = 0.0124484 Jy ! Component: 1050 - total flux cleaned = 0.013092 Jy ! Component: 1100 - total flux cleaned = 0.013927 Jy ! Component: 1150 - total flux cleaned = 0.0141299 Jy ! Component: 1200 - total flux cleaned = 0.0147207 Jy ! Component: 1250 - total flux cleaned = 0.0149124 Jy ! Component: 1300 - total flux cleaned = 0.0156623 Jy ! Component: 1350 - total flux cleaned = 0.0164007 Jy ! Component: 1400 - total flux cleaned = 0.0176598 Jy ! Component: 1450 - total flux cleaned = 0.0183644 Jy ! Component: 1500 - total flux cleaned = 0.0195698 Jy ! Component: 1550 - total flux cleaned = 0.0202436 Jy ! Component: 1600 - total flux cleaned = 0.0209033 Jy ! Component: 1650 - total flux cleaned = 0.0213862 Jy ! Component: 1700 - total flux cleaned = 0.0218602 Jy ! Component: 1750 - total flux cleaned = 0.0218628 Jy ! Component: 1800 - total flux cleaned = 0.0226287 Jy ! Component: 1850 - total flux cleaned = 0.0233751 Jy ! Component: 1900 - total flux cleaned = 0.0245504 Jy ! Component: 1950 - total flux cleaned = 0.0257115 Jy ! Component: 2000 - total flux cleaned = 0.0272822 Jy ! Total flux subtracted in 2048 components = 0.0284069 Jy ! Clean residual min=-0.007023 max=0.007466 Jy/beam ! Clean residual mean=0.000032 rms=0.003466 Jy/beam ! Combined flux in latest and established models = 0.779525 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 393 components and 0.779525 Jy ![Exited script file: muppet] wmap "J0410+7656_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.153 x 11.62 at 7.446 degrees (North through East) ! Clean map min=-0.027775 max=0.3746 Jy/beam ! Writing clean map to FITS file: J0410+7656_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.3746 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00335343 device "J0410+7656_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0410+7656_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.68561 2.68561 5.37122 10.7424 21.4849 42.9697 85.9395 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.01 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.374 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.153 x 11.62 at 7.446 degrees (North through East) ! Clean map min=-0.027775 max=0.3746 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0410+7656_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0410+7656_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0410+7656_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:21:04 2006