! Started logfile: J0354+8009_X_2006_02_23_yyk_uvs.log on Wed Jul 5 11:19:42 2006 obs J0354+8009_X_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0354+8009_X_2006_02_23_yyk_uva.fits ! AN table 1: 875 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.99779 visibilities/baseline/integration-bin. ! Found source: J0354+8009 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2403 lines of history. ! ! Reading 157152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0354+8009_X_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.259128 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5886 mas, bmaj=2.716 mas, bpa=4.919 degrees ! Estimated noise=1.21026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.198237 Jy ! Component: 100 - total flux cleaned = 0.232106 Jy ! Total flux subtracted in 100 components = 0.232106 Jy ! Clean residual min=-0.010738 max=0.015480 Jy/beam ! Clean residual mean=-0.000029 rms=0.002764 Jy/beam ! Combined flux in latest and established models = 0.232106 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.232106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093128Jy sigma=1.755067 ! Fit after self-cal, rms=0.092778Jy sigma=1.749580 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8488 mas, bmaj=2.951 mas, bpa=4.149 degrees ! Estimated noise=0.65908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -0.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271838 Jy ! Component: 100 - total flux cleaned = 0.0391555 Jy ! Component: 150 - total flux cleaned = 0.044487 Jy ! Component: 200 - total flux cleaned = 0.0478848 Jy ! Total flux subtracted in 200 components = 0.0478848 Jy ! Clean residual min=-0.007550 max=0.009281 Jy/beam ! Clean residual mean=-0.000039 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.27999 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 42 components and 0.27999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087552Jy sigma=1.629708 ! Fit after self-cal, rms=0.087587Jy sigma=1.629048 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8488 x 2.951 at 4.149 degrees (North through East) ! Clean map min=-0.0064527 max=0.24 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.99737 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.06 KP 0.99 ! LA 0.96 MK 0.99 NL 0.99 OV 0.97 ! PT 0.99 SC 1.13 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00973 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.06 KP 0.91 ! LA 0.93 MK 0.93 NL 0.99 OV 1.00 ! PT 1.04 SC 1.09 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01187 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.07 HN 0.94 KP 0.85 ! LA 0.96 MK 0.94 NL 0.95 OV 1.02 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986918 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 HN 0.98 KP 0.89 ! LA 0.95 MK 0.98 NL 0.95 OV 1.06 ! PT 1.13 SC 1.16 ! ! ! Fit before self-cal, rms=0.087587Jy sigma=1.629048 ! Fit after self-cal, rms=0.088167Jy sigma=1.578470 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088167Jy sigma=1.578470 ! Fit after self-cal, rms=0.088398Jy sigma=1.581299 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8644 mas, bmaj=2.935 mas, bpa=4.536 degrees ! Estimated noise=0.654711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, 7.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00859617 Jy ! Component: 100 - total flux cleaned = 0.0131117 Jy ! Component: 150 - total flux cleaned = 0.0158589 Jy ! Component: 200 - total flux cleaned = 0.016954 Jy ! Total flux subtracted in 200 components = 0.016954 Jy ! Clean residual min=-0.003423 max=0.003839 Jy/beam ! Clean residual mean=-0.000019 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.296944 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 84 components and 0.296944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087833Jy sigma=1.566634 ! Fit after self-cal, rms=0.088073Jy sigma=1.569507 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088073Jy sigma=1.569507 ! Fit after self-cal, rms=0.056044Jy sigma=1.035208 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034166 Jy ! Component: 100 - total flux cleaned = 0.00218272 Jy ! Component: 150 - total flux cleaned = 0.00236366 Jy ! Component: 200 - total flux cleaned = 0.00253061 Jy ! Total flux subtracted in 200 components = 0.00253061 Jy ! Clean residual min=-0.004272 max=0.003343 Jy/beam ! Clean residual mean=-0.000017 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.299475 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 106 components and 0.299475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053822Jy sigma=1.000642 ! Fit after self-cal, rms=0.053485Jy sigma=0.994732 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8644 x 2.935 at 4.536 degrees (North through East) ! Clean map min=-0.0038873 max=0.24795 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053485Jy sigma=0.994732 ! Fit after self-cal, rms=0.050747Jy sigma=0.966904 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050747Jy sigma=0.966904 ! Fit after self-cal, rms=0.050718Jy sigma=0.966483 ! Inverting map and beam ! Estimated beam: bmin=0.8452 mas, bmaj=2.971 mas, bpa=4.498 degrees ! Estimated noise=0.648018 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304146 Jy ! Component: 100 - total flux cleaned = 0.00391417 Jy ! Component: 150 - total flux cleaned = 0.00433561 Jy ! Component: 200 - total flux cleaned = 0.00433887 Jy ! Total flux subtracted in 200 components = 0.00433887 Jy ! Clean residual min=-0.002795 max=0.002650 Jy/beam ! Clean residual mean=-0.000010 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.303814 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 127 components and 0.303814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050539Jy sigma=0.962881 ! Fit after self-cal, rms=0.050526Jy sigma=0.962652 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050526Jy sigma=0.962652 ! Fit after self-cal, rms=0.049320Jy sigma=0.937020 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049320Jy sigma=0.937020 ! Fit after self-cal, rms=0.049321Jy sigma=0.936999 ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=2.973 mas, bpa=4.52 degrees ! Estimated noise=0.648138 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157484 Jy ! Component: 100 - total flux cleaned = 0.00188071 Jy ! Component: 150 - total flux cleaned = 0.00195627 Jy ! Component: 200 - total flux cleaned = 0.00199063 Jy ! Total flux subtracted in 200 components = 0.00199063 Jy ! Clean residual min=-0.002694 max=0.002532 Jy/beam ! Clean residual mean=-0.000009 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.305805 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 136 components and 0.305804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049264Jy sigma=0.935801 ! Fit after self-cal, rms=0.049260Jy sigma=0.935697 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.112 mas, bmaj=3.421 mas, bpa=1.271 degrees ! Estimated noise=0.835725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133494 Jy ! Component: 100 - total flux cleaned = 0.00141988 Jy ! Component: 150 - total flux cleaned = 0.00138504 Jy ! Component: 200 - total flux cleaned = 0.00141472 Jy ! Total flux subtracted in 200 components = 0.00141472 Jy ! Clean residual min=-0.003490 max=0.002255 Jy/beam ! Clean residual mean=-0.000013 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.307219 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 155 components and 0.307219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049264Jy sigma=0.935571 ! Fit after self-cal, rms=0.049261Jy sigma=0.935511 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5866 mas, bmaj=2.739 mas, bpa=5.051 degrees ! Estimated noise=1.18895 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.206242 Jy ! Component: 100 - total flux cleaned = 0.242864 Jy ! Component: 150 - total flux cleaned = 0.258172 Jy ! Component: 200 - total flux cleaned = 0.267206 Jy ! Total flux subtracted in 200 components = 0.267206 Jy ! Clean residual min=-0.004411 max=0.005073 Jy/beam ! Clean residual mean=-0.000013 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.267206 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.267206 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=2.973 mas, bpa=4.52 degrees ! Estimated noise=0.648138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108193 Jy ! Component: 100 - total flux cleaned = 0.0179421 Jy ! Component: 150 - total flux cleaned = 0.0232807 Jy ! Component: 200 - total flux cleaned = 0.0274264 Jy ! Total flux subtracted in 200 components = 0.0274264 Jy ! Clean residual min=-0.003248 max=0.003466 Jy/beam ! Clean residual mean=-0.000025 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.294632 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 64 components and 0.294632 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.112 mas, bmaj=3.421 mas, bpa=1.271 degrees ! Estimated noise=0.835725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566799 Jy ! Component: 100 - total flux cleaned = 0.0088854 Jy ! Component: 150 - total flux cleaned = 0.0107053 Jy ! Component: 200 - total flux cleaned = 0.0115218 Jy ! Total flux subtracted in 200 components = 0.0115218 Jy ! Clean residual min=-0.003423 max=0.002323 Jy/beam ! Clean residual mean=-0.000016 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.306154 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 94 components and 0.306154 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8437 mas, bmaj=2.973 mas, bpa=4.52 degrees ! Estimated noise=0.648138 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463346 Jy ! Component: 100 - total flux cleaned = 0.000897231 Jy ! Component: 150 - total flux cleaned = 0.00109979 Jy ! Component: 200 - total flux cleaned = 0.00110213 Jy ! Total flux subtracted in 200 components = 0.00110213 Jy ! Clean residual min=-0.002699 max=0.002528 Jy/beam ! Clean residual mean=-0.000007 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.307256 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 0.307256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049242Jy sigma=0.935463 ! Fit after self-cal, rms=0.049217Jy sigma=0.934984 wmodel J0354+8009_X_2006_02_23_yyk\_map.mod ! Writing 111 model components to file: J0354+8009_X_2006_02_23_yyk_map.mod wobs J0354+8009_X_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0354+8009_X_2006_02_23_yyk_uvs.fits wwins J0354+8009_X_2006_02_23_yyk\_map.win ! wwins: Wrote 3 windows to J0354+8009_X_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000434754 Jy ! Component: 100 - total flux cleaned = -0.00047755 Jy ! Component: 150 - total flux cleaned = -0.00059436 Jy ! Component: 200 - total flux cleaned = -0.000702223 Jy ! Component: 250 - total flux cleaned = -0.00080287 Jy ! Component: 300 - total flux cleaned = -0.000866664 Jy ! Component: 350 - total flux cleaned = -0.000927189 Jy ! Component: 400 - total flux cleaned = -0.000985471 Jy ! Component: 450 - total flux cleaned = -0.000899921 Jy ! Component: 500 - total flux cleaned = -0.000872948 Jy ! Component: 550 - total flux cleaned = -0.000766635 Jy ! Component: 600 - total flux cleaned = -0.000766656 Jy ! Component: 650 - total flux cleaned = -0.000741039 Jy ! Component: 700 - total flux cleaned = -0.000667707 Jy ! Component: 750 - total flux cleaned = -0.000715172 Jy ! Component: 800 - total flux cleaned = -0.000691735 Jy ! Component: 850 - total flux cleaned = -0.000668458 Jy ! Component: 900 - total flux cleaned = -0.00064626 Jy ! Component: 950 - total flux cleaned = -0.000624425 Jy ! Component: 1000 - total flux cleaned = -0.000603009 Jy ! Component: 1050 - total flux cleaned = -0.000624147 Jy ! Component: 1100 - total flux cleaned = -0.00064457 Jy ! Component: 1150 - total flux cleaned = -0.000644161 Jy ! Component: 1200 - total flux cleaned = -0.000643918 Jy ! Component: 1250 - total flux cleaned = -0.000683043 Jy ! Component: 1300 - total flux cleaned = -0.000682897 Jy ! Component: 1350 - total flux cleaned = -0.000720518 Jy ! Component: 1400 - total flux cleaned = -0.000720241 Jy ! Component: 1450 - total flux cleaned = -0.00075696 Jy ! Component: 1500 - total flux cleaned = -0.000738447 Jy ! Component: 1550 - total flux cleaned = -0.000738434 Jy ! Component: 1600 - total flux cleaned = -0.000773727 Jy ! Component: 1650 - total flux cleaned = -0.000756193 Jy ! Component: 1700 - total flux cleaned = -0.000756236 Jy ! Component: 1750 - total flux cleaned = -0.000824113 Jy ! Component: 1800 - total flux cleaned = -0.000907471 Jy ! Component: 1850 - total flux cleaned = -0.000924021 Jy ! Component: 1900 - total flux cleaned = -0.000956681 Jy ! Component: 1950 - total flux cleaned = -0.00105296 Jy ! Component: 2000 - total flux cleaned = -0.00103698 Jy ! Total flux subtracted in 2048 components = -0.00108441 Jy ! Clean residual min=-0.001084 max=0.000790 Jy/beam ! Clean residual mean=-0.000006 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.306172 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 248 components and 0.306172 Jy ![Exited script file: muppet] wmap "J0354+8009_X_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8437 x 2.973 at 4.52 degrees (North through East) ! Clean map min=-0.0019529 max=0.24578 Jy/beam ! Writing clean map to FITS file: J0354+8009_X_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.245785 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000285915 device "J0354+8009_X_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0354+8009_X_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.348982 0.348982 0.697964 1.39593 2.79186 5.58371 11.1674 22.3349 44.6697 89.3394 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.245 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8437 x 2.973 at 4.52 degrees (North through East) ! Clean map min=-0.0019529 max=0.24578 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0354+8009_X_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0354+8009_X_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0354+8009_X_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:20:11 2006