! Started logfile: J0339-0146_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:16:50 2006 obs J0339-0146_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0339-0146_S_2006_02_16_yyk_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.909185 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2424 lines of history. ! ! Reading 24548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.07998 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.448 mas, bmaj=6.744 mas, bpa=-3.023 degrees ! Estimated noise=2.27543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.6455 Jy ! Component: 100 - total flux cleaned = 2.0751 Jy ! Total flux subtracted in 100 components = 2.0751 Jy ! Clean residual min=-0.089164 max=0.162415 Jy/beam ! Clean residual mean=-0.000126 rms=0.029924 Jy/beam ! Combined flux in latest and established models = 2.0751 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.0751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.448571Jy sigma=6.257906 ! Fit after self-cal, rms=0.448484Jy sigma=6.251014 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.883 mas, bpa=-3.068 degrees ! Estimated noise=1.73747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.198099 Jy ! Component: 100 - total flux cleaned = 0.278038 Jy ! Component: 150 - total flux cleaned = 0.315413 Jy ! Component: 200 - total flux cleaned = 0.316405 Jy ! Total flux subtracted in 200 components = 0.316405 Jy ! Clean residual min=-0.071333 max=0.143701 Jy/beam ! Clean residual mean=-0.000546 rms=0.027275 Jy/beam ! Combined flux in latest and established models = 2.3915 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 2.3915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.379010Jy sigma=5.224673 ! Fit after self-cal, rms=0.379152Jy sigma=5.224230 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 7.883 at -3.068 degrees (North through East) ! Clean map min=-0.069345 max=1.9453 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0171 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.90 HN 0.94 KP 0.91 ! LA 1.16 MK 0.85 NL 1.19 OV 0.95 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990392 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.95 KP 0.93 ! LA 1.13 MK 0.94 NL 1.28 OV 0.95 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.959943 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.99 KP 0.94 ! LA 0.91 MK 1.08 NL 1.38 OV 1.02 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03145 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.96 HN 0.92 KP 0.87 ! LA 0.77 MK 1.06 NL 1.34 OV 0.85 ! PT 0.92 SC 1.14 ! ! ! Fit before self-cal, rms=0.379152Jy sigma=5.224230 ! Fit after self-cal, rms=0.169412Jy sigma=2.240292 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169412Jy sigma=2.240292 ! Fit after self-cal, rms=0.169562Jy sigma=2.240091 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=8.002 mas, bpa=-3.191 degrees ! Estimated noise=1.70804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0158417 Jy ! Component: 100 - total flux cleaned = -0.0172317 Jy ! Component: 150 - total flux cleaned = -0.0172366 Jy ! Component: 200 - total flux cleaned = -0.017244 Jy ! Total flux subtracted in 200 components = -0.017244 Jy ! Clean residual min=-0.013350 max=0.014954 Jy/beam ! Clean residual mean=0.000065 rms=0.003497 Jy/beam ! Combined flux in latest and established models = 2.37426 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 2.37426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168064Jy sigma=2.215687 ! Fit after self-cal, rms=0.168030Jy sigma=2.214697 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168030Jy sigma=2.214697 ! Fit after self-cal, rms=0.149920Jy sigma=2.052082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -7.17198e-06 Jy ! Component: 100 - total flux cleaned = 0.000173733 Jy ! Component: 150 - total flux cleaned = 0.000353321 Jy ! Component: 200 - total flux cleaned = 0.000527037 Jy ! Total flux subtracted in 200 components = 0.000527037 Jy ! Clean residual min=-0.012606 max=0.014490 Jy/beam ! Clean residual mean=0.000064 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 2.37479 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 2.37478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149325Jy sigma=2.045003 ! Fit after self-cal, rms=0.145795Jy sigma=2.023883 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 8.002 at -3.191 degrees (North through East) ! Clean map min=-0.012622 max=1.9379 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145795Jy sigma=2.023883 ! Fit after self-cal, rms=0.097834Jy sigma=1.077884 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097834Jy sigma=1.077884 ! Fit after self-cal, rms=0.097043Jy sigma=1.072918 ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.012 mas, bpa=-3.033 degrees ! Estimated noise=1.70878 mJy/beam. ! Added new window around map position (19.5, 10.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00858749 Jy ! Component: 100 - total flux cleaned = 0.00653148 Jy ! Component: 150 - total flux cleaned = 0.00518997 Jy ! Component: 200 - total flux cleaned = 0.00425246 Jy ! Total flux subtracted in 200 components = 0.00425246 Jy ! Clean residual min=-0.008934 max=0.010022 Jy/beam ! Clean residual mean=0.000013 rms=0.002311 Jy/beam ! Combined flux in latest and established models = 2.37904 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 2.37904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094370Jy sigma=1.028691 ! Fit after self-cal, rms=0.094191Jy sigma=1.026233 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094191Jy sigma=1.026233 ! Fit after self-cal, rms=0.093533Jy sigma=1.007061 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093533Jy sigma=1.007061 ! Fit after self-cal, rms=0.093503Jy sigma=1.006957 ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.013 mas, bpa=-2.987 degrees ! Estimated noise=1.70822 mJy/beam. ! Added new window around map position (5.5, -53). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680949 Jy ! Component: 100 - total flux cleaned = 0.00601006 Jy ! Component: 150 - total flux cleaned = 0.00537147 Jy ! Component: 200 - total flux cleaned = 0.00441031 Jy ! Total flux subtracted in 200 components = 0.00441031 Jy ! Clean residual min=-0.007199 max=0.007414 Jy/beam ! Clean residual mean=0.000005 rms=0.001887 Jy/beam ! Combined flux in latest and established models = 2.38345 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 2.38345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092164Jy sigma=0.981661 ! Fit after self-cal, rms=0.092141Jy sigma=0.981210 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.221 mas, bmaj=12.89 mas, bpa=4.483 degrees ! Estimated noise=2.16986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000895029 Jy ! Component: 100 - total flux cleaned = -0.0011883 Jy ! Component: 150 - total flux cleaned = -0.00194744 Jy ! Component: 200 - total flux cleaned = -0.00261703 Jy ! Total flux subtracted in 200 components = -0.00261703 Jy ! Clean residual min=-0.004797 max=0.006783 Jy/beam ! Clean residual mean=0.000017 rms=0.001921 Jy/beam ! Combined flux in latest and established models = 2.38083 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 2.38083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092140Jy sigma=0.981485 ! Fit after self-cal, rms=0.092091Jy sigma=0.980265 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=6.814 mas, bpa=-3.216 degrees ! Estimated noise=2.22712 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.6094 Jy ! Component: 100 - total flux cleaned = 2.02573 Jy ! Component: 150 - total flux cleaned = 2.19208 Jy ! Component: 200 - total flux cleaned = 2.26601 Jy ! Total flux subtracted in 200 components = 2.26601 Jy ! Clean residual min=-0.016240 max=0.037626 Jy/beam ! Clean residual mean=0.000075 rms=0.005457 Jy/beam ! Combined flux in latest and established models = 2.26601 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 2.26601 Jy ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.013 mas, bpa=-2.987 degrees ! Estimated noise=1.70822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587541 Jy ! Component: 100 - total flux cleaned = 0.0812502 Jy ! Component: 150 - total flux cleaned = 0.0889733 Jy ! Component: 200 - total flux cleaned = 0.0947521 Jy ! Total flux subtracted in 200 components = 0.0947521 Jy ! Clean residual min=-0.006839 max=0.006457 Jy/beam ! Clean residual mean=0.000046 rms=0.001965 Jy/beam ! Combined flux in latest and established models = 2.36076 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 79 components and 2.36076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.221 mas, bmaj=12.89 mas, bpa=4.483 degrees ! Estimated noise=2.16986 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695104 Jy ! Component: 100 - total flux cleaned = 0.0102511 Jy ! Component: 150 - total flux cleaned = 0.0124061 Jy ! Component: 200 - total flux cleaned = 0.0137258 Jy ! Total flux subtracted in 200 components = 0.0137258 Jy ! Clean residual min=-0.004848 max=0.004980 Jy/beam ! Clean residual mean=0.000030 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 2.37449 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 127 components and 2.37449 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.013 mas, bpa=-2.987 degrees ! Estimated noise=1.70822 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870353 Jy ! Component: 100 - total flux cleaned = 0.000875989 Jy ! Component: 150 - total flux cleaned = 0.00103662 Jy ! Component: 200 - total flux cleaned = 0.00116178 Jy ! Total flux subtracted in 200 components = 0.00116178 Jy ! Clean residual min=-0.005070 max=0.005520 Jy/beam ! Clean residual mean=0.000016 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 2.37565 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 156 components and 2.37565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091026Jy sigma=0.956355 ! Fit after self-cal, rms=0.090890Jy sigma=0.953561 wmodel J0339-0146_S_2006_02_16_yyk\_map.mod ! Writing 156 model components to file: J0339-0146_S_2006_02_16_yyk_map.mod wobs J0339-0146_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_2006_02_16_yyk_uvs.fits wwins J0339-0146_S_2006_02_16_yyk\_map.win ! wwins: Wrote 4 windows to J0339-0146_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078278 Jy ! Component: 100 - total flux cleaned = 0.000783581 Jy ! Component: 150 - total flux cleaned = 0.000630207 Jy ! Component: 200 - total flux cleaned = 0.000274745 Jy ! Component: 250 - total flux cleaned = 7.18605e-05 Jy ! Component: 300 - total flux cleaned = 7.1733e-06 Jy ! Component: 350 - total flux cleaned = -0.000359436 Jy ! Component: 400 - total flux cleaned = -0.000651105 Jy ! Component: 450 - total flux cleaned = -0.000821497 Jy ! Component: 500 - total flux cleaned = -0.00104148 Jy ! Component: 550 - total flux cleaned = -0.00114737 Jy ! Component: 600 - total flux cleaned = -0.00114854 Jy ! Component: 650 - total flux cleaned = -0.00114881 Jy ! Component: 700 - total flux cleaned = -0.00109966 Jy ! Component: 750 - total flux cleaned = -0.00105192 Jy ! Component: 800 - total flux cleaned = -0.00100633 Jy ! Component: 850 - total flux cleaned = -0.00100605 Jy ! Component: 900 - total flux cleaned = -0.00100484 Jy ! Component: 950 - total flux cleaned = -0.000874871 Jy ! Component: 1000 - total flux cleaned = -0.000789166 Jy ! Component: 1050 - total flux cleaned = -0.000664496 Jy ! Component: 1100 - total flux cleaned = -0.000624627 Jy ! Component: 1150 - total flux cleaned = -0.000545361 Jy ! Component: 1200 - total flux cleaned = -0.00038951 Jy ! Component: 1250 - total flux cleaned = -0.000235634 Jy ! Component: 1300 - total flux cleaned = -0.000160878 Jy ! Component: 1350 - total flux cleaned = 2.44299e-05 Jy ! Component: 1400 - total flux cleaned = -1.14461e-05 Jy ! Component: 1450 - total flux cleaned = 0.00016858 Jy ! Component: 1500 - total flux cleaned = 0.000309952 Jy ! Component: 1550 - total flux cleaned = 0.000345094 Jy ! Component: 1600 - total flux cleaned = 0.000550709 Jy ! Component: 1650 - total flux cleaned = 0.00071948 Jy ! Component: 1700 - total flux cleaned = 0.000752545 Jy ! Component: 1750 - total flux cleaned = 0.000884044 Jy ! Component: 1800 - total flux cleaned = 0.00114267 Jy ! Component: 1850 - total flux cleaned = 0.0012695 Jy ! Component: 1900 - total flux cleaned = 0.0015208 Jy ! Component: 1950 - total flux cleaned = 0.0017372 Jy ! Component: 2000 - total flux cleaned = 0.00201159 Jy ! Total flux subtracted in 2048 components = 0.00213128 Jy ! Clean residual min=-0.001736 max=0.001764 Jy/beam ! Clean residual mean=0.000002 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 2.37778 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 288 components and 2.37778 Jy ![Exited script file: muppet] wmap "J0339-0146_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 8.013 at -2.987 degrees (North through East) ! Clean map min=-0.0061548 max=1.946 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.94605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000574062 device "J0339-0146_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0884966 0.0884966 0.176993 0.353986 0.707973 1.41595 2.83189 5.66378 11.3276 22.6551 45.3103 90.6205 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.946 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.201 x 8.013 at -2.987 degrees (North through East) ! Clean map min=-0.0061548 max=1.946 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:17:20 2006