! Started logfile: J0339-0146_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:16:15 2006 obs J0339-0146_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0339-0146_S_2006_02_14_yyk_uva.fits ! AN table 1: 222 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.766767 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2689 lines of history. ! ! Reading 30640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.18317 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.532 mas, bpa=-3.002 degrees ! Estimated noise=2.10493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.72217 Jy ! Component: 100 - total flux cleaned = 2.17328 Jy ! Total flux subtracted in 100 components = 2.17328 Jy ! Clean residual min=-0.082794 max=0.137721 Jy/beam ! Clean residual mean=-0.000429 rms=0.026691 Jy/beam ! Combined flux in latest and established models = 2.17328 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.17328 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.438597Jy sigma=6.834322 ! Fit after self-cal, rms=0.438137Jy sigma=6.829310 ! Inverting map and beam ! Estimated beam: bmin=2.451 mas, bmaj=6.532 mas, bpa=-3.002 degrees ! Estimated noise=2.10493 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=7.42 mas, bpa=-2.449 degrees ! Estimated noise=1.56818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.181312 Jy ! Component: 100 - total flux cleaned = 0.264436 Jy ! Component: 150 - total flux cleaned = 0.308014 Jy ! Component: 200 - total flux cleaned = 0.326455 Jy ! Total flux subtracted in 200 components = 0.326455 Jy ! Clean residual min=-0.073453 max=0.078483 Jy/beam ! Clean residual mean=-0.000869 rms=0.019583 Jy/beam ! Combined flux in latest and established models = 2.49974 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 44 components and 2.49974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353597Jy sigma=5.903328 ! Fit after self-cal, rms=0.353526Jy sigma=5.902453 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.075 x 7.42 at -2.449 degrees (North through East) ! Clean map min=-0.070413 max=1.9891 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03223 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 0.97 KP 0.93 ! LA 1.20 MK 0.91 NL 0.92 OV 0.95 ! PT 1.03 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00998 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.01 KP 0.95 ! LA 1.16 MK 1.00 NL 0.94 OV 1.01 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.943194 ! Telescope amplitude corrections in sub-array 1: ! BR 1.43 FD 0.97 HN 1.03 KP 0.96 ! LA 0.94 MK 1.14 NL 1.05 OV 1.03 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0527 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.97 HN 0.97 KP 0.89 ! LA 0.78 MK 1.14 NL 0.97 OV 0.87 ! PT 0.94 SC 1.07 ! ! ! Fit before self-cal, rms=0.353526Jy sigma=5.902453 ! Fit after self-cal, rms=0.226238Jy sigma=3.502467 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226238Jy sigma=3.502467 ! Fit after self-cal, rms=0.226283Jy sigma=3.502401 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=7.578 mas, bpa=-1.505 degrees ! Estimated noise=1.57751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (53.5, 54). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288342 Jy ! Component: 100 - total flux cleaned = 0.0297453 Jy ! Component: 150 - total flux cleaned = 0.0297887 Jy ! Component: 200 - total flux cleaned = 0.0304317 Jy ! Total flux subtracted in 200 components = 0.0304317 Jy ! Clean residual min=-0.017511 max=0.024981 Jy/beam ! Clean residual mean=0.000122 rms=0.004844 Jy/beam ! Combined flux in latest and established models = 2.53017 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 2.53017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219074Jy sigma=3.413953 ! Fit after self-cal, rms=0.219104Jy sigma=3.409825 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219104Jy sigma=3.409825 ! Fit after self-cal, rms=0.204807Jy sigma=3.205025 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042431 Jy ! Component: 100 - total flux cleaned = 0.00474396 Jy ! Component: 150 - total flux cleaned = 0.0042807 Jy ! Component: 200 - total flux cleaned = 0.00428238 Jy ! Total flux subtracted in 200 components = 0.00428238 Jy ! Clean residual min=-0.018245 max=0.019110 Jy/beam ! Clean residual mean=0.000132 rms=0.004410 Jy/beam ! Combined flux in latest and established models = 2.53445 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 2.53445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202634Jy sigma=3.177508 ! Fit after self-cal, rms=0.200697Jy sigma=3.159268 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.113 x 7.578 at -1.505 degrees (North through East) ! Clean map min=-0.017716 max=2.0251 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200697Jy sigma=3.159268 ! Fit after self-cal, rms=0.110497Jy sigma=1.360375 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110497Jy sigma=1.360375 ! Fit after self-cal, rms=0.109885Jy sigma=1.355457 ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=7.578 mas, bpa=-1.554 degrees ! Estimated noise=1.57029 mJy/beam. ! Added new window around map position (4, 2.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377533 Jy ! Component: 100 - total flux cleaned = 0.00106105 Jy ! Component: 150 - total flux cleaned = -0.000332261 Jy ! Component: 200 - total flux cleaned = -0.00074683 Jy ! Total flux subtracted in 200 components = -0.00074683 Jy ! Clean residual min=-0.011932 max=0.011477 Jy/beam ! Clean residual mean=0.000049 rms=0.003026 Jy/beam ! Combined flux in latest and established models = 2.5337 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 2.5337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105644Jy sigma=1.275770 ! Fit after self-cal, rms=0.105302Jy sigma=1.272242 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105302Jy sigma=1.272242 ! Fit after self-cal, rms=0.098045Jy sigma=1.159128 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098045Jy sigma=1.159128 ! Fit after self-cal, rms=0.097996Jy sigma=1.158886 ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.577 mas, bpa=-1.568 degrees ! Estimated noise=1.5692 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000405892 Jy ! Component: 100 - total flux cleaned = -0.00184612 Jy ! Component: 150 - total flux cleaned = -0.00215691 Jy ! Component: 200 - total flux cleaned = -0.00187613 Jy ! Total flux subtracted in 200 components = -0.00187613 Jy ! Clean residual min=-0.010429 max=0.010392 Jy/beam ! Clean residual mean=0.000043 rms=0.002611 Jy/beam ! Combined flux in latest and established models = 2.53183 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 2.53183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096161Jy sigma=1.121879 ! Fit after self-cal, rms=0.096048Jy sigma=1.120795 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.776 mas, bmaj=12.4 mas, bpa=1.746 degrees ! Estimated noise=2.01733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208164 Jy ! Component: 100 - total flux cleaned = 0.00228716 Jy ! Component: 150 - total flux cleaned = 0.00291178 Jy ! Component: 200 - total flux cleaned = 0.00305035 Jy ! Total flux subtracted in 200 components = 0.00305035 Jy ! Clean residual min=-0.011105 max=0.011207 Jy/beam ! Clean residual mean=0.000073 rms=0.003346 Jy/beam ! Combined flux in latest and established models = 2.53488 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 125 components and 2.53488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095542Jy sigma=1.112651 ! Fit after self-cal, rms=0.095475Jy sigma=1.111475 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=6.609 mas, bpa=-2.672 degrees ! Estimated noise=2.08045 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.69453 Jy ! Component: 100 - total flux cleaned = 2.12423 Jy ! Component: 150 - total flux cleaned = 2.29982 Jy ! Component: 200 - total flux cleaned = 2.38098 Jy ! Total flux subtracted in 200 components = 2.38098 Jy ! Clean residual min=-0.018347 max=0.028979 Jy/beam ! Clean residual mean=0.000046 rms=0.006113 Jy/beam ! Combined flux in latest and established models = 2.38098 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 2.38098 Jy ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.577 mas, bpa=-1.568 degrees ! Estimated noise=1.5692 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629209 Jy ! Component: 100 - total flux cleaned = 0.0950263 Jy ! Component: 150 - total flux cleaned = 0.114659 Jy ! Component: 200 - total flux cleaned = 0.128008 Jy ! Total flux subtracted in 200 components = 0.128008 Jy ! Clean residual min=-0.008765 max=0.010570 Jy/beam ! Clean residual mean=0.000067 rms=0.002732 Jy/beam ! Combined flux in latest and established models = 2.50899 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 81 components and 2.50899 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.776 mas, bmaj=12.4 mas, bpa=1.746 degrees ! Estimated noise=2.01733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136008 Jy ! Component: 100 - total flux cleaned = 0.0191795 Jy ! Component: 150 - total flux cleaned = 0.0216722 Jy ! Component: 200 - total flux cleaned = 0.0235009 Jy ! Total flux subtracted in 200 components = 0.0235009 Jy ! Clean residual min=-0.010215 max=0.009315 Jy/beam ! Clean residual mean=0.000092 rms=0.003228 Jy/beam ! Combined flux in latest and established models = 2.53249 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 125 components and 2.53249 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=7.577 mas, bpa=-1.568 degrees ! Estimated noise=1.5692 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165627 Jy ! Component: 100 - total flux cleaned = -0.000678435 Jy ! Component: 150 - total flux cleaned = 0.000297229 Jy ! Component: 200 - total flux cleaned = 0.000629441 Jy ! Total flux subtracted in 200 components = 0.000629441 Jy ! Clean residual min=-0.008147 max=0.007514 Jy/beam ! Clean residual mean=0.000042 rms=0.002267 Jy/beam ! Combined flux in latest and established models = 2.53312 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 2.53312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093487Jy sigma=1.089848 ! Fit after self-cal, rms=0.093084Jy sigma=1.085186 wmodel J0339-0146_S_2006_02_14_yyk\_map.mod ! Writing 144 model components to file: J0339-0146_S_2006_02_14_yyk_map.mod wobs J0339-0146_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_2006_02_14_yyk_uvs.fits wwins J0339-0146_S_2006_02_14_yyk\_map.win ! wwins: Wrote 3 windows to J0339-0146_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216916 Jy ! Component: 100 - total flux cleaned = -0.00114768 Jy ! Component: 150 - total flux cleaned = -0.000324967 Jy ! Component: 200 - total flux cleaned = -0.000206625 Jy ! Component: 250 - total flux cleaned = -0.000309647 Jy ! Component: 300 - total flux cleaned = -0.000408265 Jy ! Component: 350 - total flux cleaned = -3.00366e-05 Jy ! Component: 400 - total flux cleaned = 6.09554e-05 Jy ! Component: 450 - total flux cleaned = -0.0001172 Jy ! Component: 500 - total flux cleaned = -0.000202831 Jy ! Component: 550 - total flux cleaned = -0.00036793 Jy ! Component: 600 - total flux cleaned = -0.000448295 Jy ! Component: 650 - total flux cleaned = -0.000447802 Jy ! Component: 700 - total flux cleaned = -0.000525341 Jy ! Component: 750 - total flux cleaned = -0.000527251 Jy ! Component: 800 - total flux cleaned = -0.00081382 Jy ! Component: 850 - total flux cleaned = -0.00060394 Jy ! Component: 900 - total flux cleaned = -0.000536837 Jy ! Component: 950 - total flux cleaned = -0.000337769 Jy ! Component: 1000 - total flux cleaned = -0.000338719 Jy ! Component: 1050 - total flux cleaned = -0.000275402 Jy ! Component: 1100 - total flux cleaned = -0.000152914 Jy ! Component: 1150 - total flux cleaned = -0.000153682 Jy ! Component: 1200 - total flux cleaned = 0.000139253 Jy ! Component: 1250 - total flux cleaned = 0.000253697 Jy ! Component: 1300 - total flux cleaned = 0.000477183 Jy ! Component: 1350 - total flux cleaned = 0.000640992 Jy ! Component: 1400 - total flux cleaned = 0.000854937 Jy ! Component: 1450 - total flux cleaned = 0.00106354 Jy ! Component: 1500 - total flux cleaned = 0.00101243 Jy ! Component: 1550 - total flux cleaned = 0.00116355 Jy ! Component: 1600 - total flux cleaned = 0.00121317 Jy ! Component: 1650 - total flux cleaned = 0.0012626 Jy ! Component: 1700 - total flux cleaned = 0.00121638 Jy ! Component: 1750 - total flux cleaned = 0.00135543 Jy ! Component: 1800 - total flux cleaned = 0.00131012 Jy ! Component: 1850 - total flux cleaned = 0.0014452 Jy ! Component: 1900 - total flux cleaned = 0.00131354 Jy ! Component: 1950 - total flux cleaned = 0.00131314 Jy ! Component: 2000 - total flux cleaned = 0.0012285 Jy ! Total flux subtracted in 2048 components = 0.00127024 Jy ! Clean residual min=-0.002307 max=0.002104 Jy/beam ! Clean residual mean=0.000009 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 2.53439 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 268 components and 2.53439 Jy ![Exited script file: muppet] wmap "J0339-0146_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 7.577 at -1.568 degrees (North through East) ! Clean map min=-0.0050932 max=2.0363 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.03626 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000791146 device "J0339-0146_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.116559 0.116559 0.233117 0.466235 0.932469 1.86494 3.72988 7.45975 14.9195 29.839 59.678 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.036 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 7.577 at -1.568 degrees (North through East) ! Clean map min=-0.0050932 max=2.0363 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:16:49 2006