! Started logfile: J0336+3218_X_2006_02_23_yyk_uvs.log on Wed Jul  5 11:15:35 2006
obs J0336+3218_X_2006_02_23_yyk_uva.fits
! Reading UV FITS file: J0336+3218_X_2006_02_23_yyk_uva.fits
! AN table 1: 232 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.799904 visibilities/baseline/integration-bin.
! Found source: J0336+3218
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2397 lines of history.
! 
! Reading 33404 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J0336+3218_X_2006_02_23_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.40603 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7556 mas, bmaj=2.351 mas, bpa=-25.46 degrees
! Estimated noise=1.95319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.15497 Jy
! Component: 100  -  total flux cleaned = 1.44736 Jy
! Total flux subtracted in 100 components = 1.44736 Jy
! Clean residual min=-0.074505 max=0.126596 Jy/beam
! Clean residual mean=-0.001343 rms=0.024574 Jy/beam
! Combined flux in latest and established models = 1.44736 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.44736 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.453667Jy  sigma=6.526386
! Fit after  self-cal, rms=0.446701Jy  sigma=6.427432
! Inverting map and beam 
! Estimated beam: bmin=0.7556 mas, bmaj=2.351 mas, bpa=-25.46 degrees
! Estimated noise=1.95319 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9293 mas, bmaj=2.645 mas, bpa=-27.06 degrees
! Estimated noise=1.44666 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.14019 Jy
! Component: 100  -  total flux cleaned = 0.17135 Jy
! Component: 150  -  total flux cleaned = 0.180407 Jy
! Component: 200  -  total flux cleaned = 0.189062 Jy
! Total flux subtracted in 200 components = 0.189062 Jy
! Clean residual min=-0.063024 max=0.147647 Jy/beam
! Clean residual mean=-0.001583 rms=0.022925 Jy/beam
! Combined flux in latest and established models = 1.63643 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 29 components and 1.63643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.413436Jy  sigma=5.620628
! Fit after  self-cal, rms=0.412527Jy  sigma=5.606438
! Inverting map 
! Added new window around map position (4.4, -3.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.15333 Jy
! Component: 100  -  total flux cleaned = 0.214806 Jy
! Component: 150  -  total flux cleaned = 0.254673 Jy
! Component: 200  -  total flux cleaned = 0.280768 Jy
! Total flux subtracted in 200 components = 0.280768 Jy
! Clean residual min=-0.042173 max=0.047003 Jy/beam
! Clean residual mean=-0.000067 rms=0.011028 Jy/beam
! Combined flux in latest and established models = 1.91719 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 73 components and 1.91719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.377078Jy  sigma=4.498491
! Fit after  self-cal, rms=0.375758Jy  sigma=4.457429
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9293 x 2.645 at -27.06 degrees (North through East)
! Clean map  min=-0.039359  max=1.3589 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.982141
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.03     KP        0.97     
!   LA        0.99     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.20     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.997826
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.02     KP        0.91     
!   LA        0.95     MK        0.97     NL        0.99     OV        0.98     
!   PT        1.04     SC        1.18     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.991803
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.93     KP        0.86     
!   LA        0.97     MK        1.00     NL        0.97     OV        1.02     
!   PT        1.06     SC        1.16     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.966753
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        0.96     KP        0.89     
!   LA        0.96     MK        1.03     NL        0.99     OV        1.05     
!   PT        1.15     SC        1.25     
! 
! 
! Fit before self-cal, rms=0.375758Jy  sigma=4.457429
! Fit after  self-cal, rms=0.391156Jy  sigma=3.990320
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.391156Jy  sigma=3.990320
! Fit after  self-cal, rms=0.390616Jy  sigma=3.988885
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9467 mas, bmaj=2.705 mas, bpa=-28.4 degrees
! Estimated noise=1.41286 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0417548 Jy
! Component: 100  -  total flux cleaned = -0.0428836 Jy
! Component: 150  -  total flux cleaned = -0.0417374 Jy
! Component: 200  -  total flux cleaned = -0.0403619 Jy
! Total flux subtracted in 200 components = -0.0403619 Jy
! Clean residual min=-0.014882 max=0.015414 Jy/beam
! Clean residual mean=-0.000043 rms=0.003646 Jy/beam
! Combined flux in latest and established models = 1.87683 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 93 components and 1.87683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.387040Jy  sigma=3.865268
! Fit after  self-cal, rms=0.386695Jy  sigma=3.860841
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.386695Jy  sigma=3.860841
! Fit after  self-cal, rms=0.180958Jy  sigma=2.033645
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000924088 Jy
! Component: 100  -  total flux cleaned = -0.0026922 Jy
! Component: 150  -  total flux cleaned = -0.00434022 Jy
! Component: 200  -  total flux cleaned = -0.00660416 Jy
! Total flux subtracted in 200 components = -0.00660416 Jy
! Clean residual min=-0.012641 max=0.013590 Jy/beam
! Clean residual mean=-0.000077 rms=0.003640 Jy/beam
! Combined flux in latest and established models = 1.87023 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 1.87023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163947Jy  sigma=1.867171
! Fit after  self-cal, rms=0.146831Jy  sigma=1.734548
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9467 x 2.705 at -28.4 degrees (North through East)
! Clean map  min=-0.014159  max=1.355 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146831Jy  sigma=1.734548
! Fit after  self-cal, rms=0.089451Jy  sigma=1.258026
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089451Jy  sigma=1.258026
! Fit after  self-cal, rms=0.088213Jy  sigma=1.245746
! Inverting map and beam 
! Estimated beam: bmin=0.9359 mas, bmaj=2.629 mas, bpa=-27.12 degrees
! Estimated noise=1.39634 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00630251 Jy
! Component: 100  -  total flux cleaned = 0.00699836 Jy
! Component: 150  -  total flux cleaned = 0.0063872 Jy
! Component: 200  -  total flux cleaned = 0.00587149 Jy
! Total flux subtracted in 200 components = 0.00587149 Jy
! Clean residual min=-0.009574 max=0.010463 Jy/beam
! Clean residual mean=-0.000027 rms=0.002644 Jy/beam
! Combined flux in latest and established models = 1.8761 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 128 components and 1.8761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085768Jy  sigma=1.202945
! Fit after  self-cal, rms=0.085668Jy  sigma=1.200904
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085668Jy  sigma=1.200904
! Fit after  self-cal, rms=0.084581Jy  sigma=1.178013
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084581Jy  sigma=1.178013
! Fit after  self-cal, rms=0.084580Jy  sigma=1.177940
! Inverting map and beam 
! Estimated beam: bmin=0.9357 mas, bmaj=2.634 mas, bpa=-27.23 degrees
! Estimated noise=1.39648 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128131 Jy
! Component: 100  -  total flux cleaned = 0.00154664 Jy
! Component: 150  -  total flux cleaned = 0.00203697 Jy
! Component: 200  -  total flux cleaned = 0.00226789 Jy
! Total flux subtracted in 200 components = 0.00226789 Jy
! Clean residual min=-0.008940 max=0.009799 Jy/beam
! Clean residual mean=-0.000022 rms=0.002442 Jy/beam
! Combined flux in latest and established models = 1.87837 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 140 components and 1.87837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083051Jy  sigma=1.151347
! Fit after  self-cal, rms=0.083047Jy  sigma=1.150697
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.329 mas, bmaj=3.099 mas, bpa=-35.53 degrees
! Estimated noise=1.71141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00542081 Jy
! Component: 100  -  total flux cleaned = 0.00577597 Jy
! Component: 150  -  total flux cleaned = 0.00592656 Jy
! Component: 200  -  total flux cleaned = 0.00605787 Jy
! Total flux subtracted in 200 components = 0.00605787 Jy
! Clean residual min=-0.008960 max=0.009910 Jy/beam
! Clean residual mean=0.000018 rms=0.002712 Jy/beam
! Combined flux in latest and established models = 1.88443 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 154 components and 1.88443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083352Jy  sigma=1.144948
! Fit after  self-cal, rms=0.083318Jy  sigma=1.144011
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7512 mas, bmaj=2.345 mas, bpa=-25.3 degrees
! Estimated noise=1.88071 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.13302 Jy
! Component: 100  -  total flux cleaned = 1.40548 Jy
! Component: 150  -  total flux cleaned = 1.54469 Jy
! Component: 200  -  total flux cleaned = 1.62928 Jy
! Total flux subtracted in 200 components = 1.62928 Jy
! Clean residual min=-0.025087 max=0.048474 Jy/beam
! Clean residual mean=-0.000634 rms=0.009553 Jy/beam
! Combined flux in latest and established models = 1.62928 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 1.62928 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9357 mas, bmaj=2.634 mas, bpa=-27.23 degrees
! Estimated noise=1.39648 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -1.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0789975 Jy
! Component: 100  -  total flux cleaned = 0.127549 Jy
! Component: 150  -  total flux cleaned = 0.16141 Jy
! Component: 200  -  total flux cleaned = 0.185651 Jy
! Total flux subtracted in 200 components = 0.185651 Jy
! Clean residual min=-0.011915 max=0.013984 Jy/beam
! Clean residual mean=-0.000278 rms=0.003827 Jy/beam
! Combined flux in latest and established models = 1.81493 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 74 components and 1.81493 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.329 mas, bmaj=3.099 mas, bpa=-35.53 degrees
! Estimated noise=1.71141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245959 Jy
! Component: 100  -  total flux cleaned = 0.0357316 Jy
! Component: 150  -  total flux cleaned = 0.0421462 Jy
! Component: 200  -  total flux cleaned = 0.0466139 Jy
! Total flux subtracted in 200 components = 0.0466139 Jy
! Clean residual min=-0.007916 max=0.009052 Jy/beam
! Clean residual mean=-0.000142 rms=0.002822 Jy/beam
! Combined flux in latest and established models = 1.86154 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 121 components and 1.86154 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9357 mas, bmaj=2.634 mas, bpa=-27.23 degrees
! Estimated noise=1.39648 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000696567 Jy
! Component: 100  -  total flux cleaned = 0.00399155 Jy
! Component: 150  -  total flux cleaned = 0.00643838 Jy
! Component: 200  -  total flux cleaned = 0.00830231 Jy
! Total flux subtracted in 200 components = 0.00830231 Jy
! Clean residual min=-0.008511 max=0.008836 Jy/beam
! Clean residual mean=-0.000048 rms=0.002239 Jy/beam
! Combined flux in latest and established models = 1.86984 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 150 components and 1.86984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082433Jy  sigma=1.116820
! Fit after  self-cal, rms=0.082394Jy  sigma=1.107168
wmodel J0336+3218_X_2006_02_23_yyk\_map.mod
! Writing 150 model components to file: J0336+3218_X_2006_02_23_yyk_map.mod
wobs J0336+3218_X_2006_02_23_yyk\_uvs.fits
! Writing UV FITS file: J0336+3218_X_2006_02_23_yyk_uvs.fits
wwins J0336+3218_X_2006_02_23_yyk\_map.win
! wwins: Wrote 3 windows to J0336+3218_X_2006_02_23_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.84342e-05 Jy
! Component: 100  -  total flux cleaned = -0.000237686 Jy
! Component: 150  -  total flux cleaned = -0.000365886 Jy
! Component: 200  -  total flux cleaned = -0.000368522 Jy
! Component: 250  -  total flux cleaned = 0.00042025 Jy
! Component: 300  -  total flux cleaned = 0.000961208 Jy
! Component: 350  -  total flux cleaned = 0.00106688 Jy
! Component: 400  -  total flux cleaned = 0.00126842 Jy
! Component: 450  -  total flux cleaned = 0.00136249 Jy
! Component: 500  -  total flux cleaned = 0.00136349 Jy
! Component: 550  -  total flux cleaned = 0.00181311 Jy
! Component: 600  -  total flux cleaned = 0.00198838 Jy
! Component: 650  -  total flux cleaned = 0.00241256 Jy
! Component: 700  -  total flux cleaned = 0.00290425 Jy
! Component: 750  -  total flux cleaned = 0.00330379 Jy
! Component: 800  -  total flux cleaned = 0.00376793 Jy
! Component: 850  -  total flux cleaned = 0.00429485 Jy
! Component: 900  -  total flux cleaned = 0.00459004 Jy
! Component: 950  -  total flux cleaned = 0.00487774 Jy
! Component: 1000  -  total flux cleaned = 0.00509053 Jy
! Component: 1050  -  total flux cleaned = 0.00536726 Jy
! Component: 1100  -  total flux cleaned = 0.00563838 Jy
! Component: 1150  -  total flux cleaned = 0.00623344 Jy
! Component: 1200  -  total flux cleaned = 0.00649198 Jy
! Component: 1250  -  total flux cleaned = 0.00674603 Jy
! Component: 1300  -  total flux cleaned = 0.00705834 Jy
! Component: 1350  -  total flux cleaned = 0.00736523 Jy
! Component: 1400  -  total flux cleaned = 0.00784586 Jy
! Component: 1450  -  total flux cleaned = 0.00808143 Jy
! Component: 1500  -  total flux cleaned = 0.00848795 Jy
! Component: 1550  -  total flux cleaned = 0.00905947 Jy
! Component: 1600  -  total flux cleaned = 0.00956456 Jy
! Component: 1650  -  total flux cleaned = 0.00989613 Jy
! Component: 1700  -  total flux cleaned = 0.0102779 Jy
! Component: 1750  -  total flux cleaned = 0.0107074 Jy
! Component: 1800  -  total flux cleaned = 0.0110242 Jy
! Component: 1850  -  total flux cleaned = 0.0112323 Jy
! Component: 1900  -  total flux cleaned = 0.01154 Jy
! Component: 1950  -  total flux cleaned = 0.011793 Jy
! Component: 2000  -  total flux cleaned = 0.0119433 Jy
! Total flux subtracted in 2048 components = 0.012289 Jy
! Clean residual min=-0.002453 max=0.002535 Jy/beam
! Clean residual mean=-0.000008 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 1.88213 Jy
keep
! Adding 127 model components to the UV plane model.
! The established model now contains 276 components and 1.88213 Jy
![Exited script file: muppet]
wmap "J0336+3218_X_2006_02_23_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9357 x 2.634 at -27.23 degrees (North through East)
! Clean map  min=-0.0080364  max=1.3353 Jy/beam
! Writing clean map to FITS file: J0336+3218_X_2006_02_23_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.33526 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000935765 
device "J0336+3218_X_2006_02_23_yyk\_map.eps/VPS"
! Attempting to open device: 'J0336+3218_X_2006_02_23_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.210244 0.210244 0.420488 0.840975 1.68195 3.3639 6.7278 13.4556 26.9112 53.8224
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0028 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.335 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9357 x 2.634 at -27.23 degrees (North through East)
! Clean map  min=-0.0080364  max=1.3353 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0336+3218_X_2006_02_23_yyk\_map.gif/gif"
! Attempting to open device: 'J0336+3218_X_2006_02_23_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0336+3218_X_2006_02_23_yyk_uvs.log closed on Wed Jul  5 11:16:15 2006