! Started logfile: J0336+3218_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:13:05 2006 obs J0336+3218_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0336+3218_S_2006_02_16_yyk_uva.fits ! AN table 1: 231 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.805195 visibilities/baseline/integration-bin. ! Found source: J0336+3218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 33480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0336+3218_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.58931 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=7.903 mas, bpa=-25.3 degrees ! Estimated noise=1.79919 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.19713 Jy ! Component: 100 - total flux cleaned = 1.65732 Jy ! Total flux subtracted in 100 components = 1.65732 Jy ! Clean residual min=-0.086967 max=0.162312 Jy/beam ! Clean residual mean=-0.000084 rms=0.031326 Jy/beam ! Combined flux in latest and established models = 1.65732 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.65732 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.492611Jy sigma=8.053778 ! Fit after self-cal, rms=0.489196Jy sigma=7.992165 ! Inverting map and beam ! Estimated beam: bmin=2.655 mas, bmaj=7.903 mas, bpa=-25.3 degrees ! Estimated noise=1.79919 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=8.303 mas, bpa=-24.18 degrees ! Estimated noise=1.38593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.278257 Jy ! Component: 100 - total flux cleaned = 0.435474 Jy ! Component: 150 - total flux cleaned = 0.538535 Jy ! Component: 200 - total flux cleaned = 0.60787 Jy ! Total flux subtracted in 200 components = 0.60787 Jy ! Clean residual min=-0.066594 max=0.099048 Jy/beam ! Clean residual mean=-0.000266 rms=0.021209 Jy/beam ! Combined flux in latest and established models = 2.26519 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 2.26519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323096Jy sigma=5.117161 ! Fit after self-cal, rms=0.320727Jy sigma=5.090972 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.209 x 8.303 at -24.18 degrees (North through East) ! Clean map min=-0.062351 max=1.2276 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01885 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.91 HN 0.90 KP 0.88 ! LA 1.13 MK 0.91 NL 1.07 OV 0.94 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.998336 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.93 KP 0.91 ! LA 1.10 MK 0.99 NL 1.16 OV 0.96 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.948911 ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.99 HN 0.95 KP 0.92 ! LA 0.88 MK 1.08 NL 1.26 OV 1.02 ! PT 1.02 SC 1.09 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03268 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.90 KP 0.85 ! LA 0.76 MK 1.07 NL 1.20 OV 0.87 ! PT 0.90 SC 1.19 ! ! ! Fit before self-cal, rms=0.320727Jy sigma=5.090972 ! Fit after self-cal, rms=0.199043Jy sigma=3.287823 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199043Jy sigma=3.287823 ! Fit after self-cal, rms=0.198917Jy sigma=3.287096 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=8.668 mas, bpa=-25.11 degrees ! Estimated noise=1.37505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -8.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491571 Jy ! Component: 100 - total flux cleaned = 0.0475973 Jy ! Component: 150 - total flux cleaned = 0.0499377 Jy ! Component: 200 - total flux cleaned = 0.049932 Jy ! Total flux subtracted in 200 components = 0.049932 Jy ! Clean residual min=-0.020556 max=0.026540 Jy/beam ! Clean residual mean=0.000054 rms=0.006421 Jy/beam ! Combined flux in latest and established models = 2.31512 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 2.31512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175172Jy sigma=2.821491 ! Fit after self-cal, rms=0.173972Jy sigma=2.802906 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173972Jy sigma=2.802906 ! Fit after self-cal, rms=0.152050Jy sigma=2.410242 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122596 Jy ! Component: 100 - total flux cleaned = 0.0129854 Jy ! Component: 150 - total flux cleaned = 0.0129534 Jy ! Component: 200 - total flux cleaned = 0.0129202 Jy ! Total flux subtracted in 200 components = 0.0129202 Jy ! Clean residual min=-0.018636 max=0.018924 Jy/beam ! Clean residual mean=0.000050 rms=0.005382 Jy/beam ! Combined flux in latest and established models = 2.32804 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 87 components and 2.32804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145461Jy sigma=2.307441 ! Fit after self-cal, rms=0.142474Jy sigma=2.266192 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.284 x 8.668 at -25.11 degrees (North through East) ! Clean map min=-0.021934 max=1.2637 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142474Jy sigma=2.266192 ! Fit after self-cal, rms=0.103011Jy sigma=1.400861 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103011Jy sigma=1.400861 ! Fit after self-cal, rms=0.102521Jy sigma=1.393848 ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.618 mas, bpa=-24.77 degrees ! Estimated noise=1.36048 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130215 Jy ! Component: 100 - total flux cleaned = 0.00182409 Jy ! Component: 150 - total flux cleaned = 0.00137781 Jy ! Component: 200 - total flux cleaned = 0.00176156 Jy ! Total flux subtracted in 200 components = 0.00176156 Jy ! Clean residual min=-0.014277 max=0.013590 Jy/beam ! Clean residual mean=0.000007 rms=0.004087 Jy/beam ! Combined flux in latest and established models = 2.32981 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 2.32981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097322Jy sigma=1.281412 ! Fit after self-cal, rms=0.097076Jy sigma=1.274722 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097076Jy sigma=1.274722 ! Fit after self-cal, rms=0.094533Jy sigma=1.235030 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094533Jy sigma=1.235030 ! Fit after self-cal, rms=0.094557Jy sigma=1.234846 ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.606 mas, bpa=-24.59 degrees ! Estimated noise=1.35582 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147069 Jy ! Component: 100 - total flux cleaned = -0.00144529 Jy ! Component: 150 - total flux cleaned = -0.00147118 Jy ! Component: 200 - total flux cleaned = -0.00116553 Jy ! Total flux subtracted in 200 components = -0.00116553 Jy ! Clean residual min=-0.012405 max=0.011243 Jy/beam ! Clean residual mean=-0.000003 rms=0.003410 Jy/beam ! Combined flux in latest and established models = 2.32864 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 2.32864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091657Jy sigma=1.171833 ! Fit after self-cal, rms=0.091576Jy sigma=1.168914 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.981 mas, bmaj=9.851 mas, bpa=-7.103 degrees ! Estimated noise=1.7009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019903 Jy ! Component: 100 - total flux cleaned = 0.00272617 Jy ! Component: 150 - total flux cleaned = 0.00237988 Jy ! Component: 200 - total flux cleaned = 0.00205007 Jy ! Total flux subtracted in 200 components = 0.00205007 Jy ! Clean residual min=-0.014131 max=0.014274 Jy/beam ! Clean residual mean=-0.000009 rms=0.004031 Jy/beam ! Combined flux in latest and established models = 2.33069 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 2.33069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091256Jy sigma=1.159358 ! Fit after self-cal, rms=0.091128Jy sigma=1.157751 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=8.013 mas, bpa=-25.51 degrees ! Estimated noise=1.76528 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.17331 Jy ! Component: 100 - total flux cleaned = 1.62122 Jy ! Component: 150 - total flux cleaned = 1.83743 Jy ! Component: 200 - total flux cleaned = 1.95948 Jy ! Total flux subtracted in 200 components = 1.95948 Jy ! Clean residual min=-0.030956 max=0.048426 Jy/beam ! Clean residual mean=0.000038 rms=0.011883 Jy/beam ! Combined flux in latest and established models = 1.95948 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 1.95948 Jy ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.606 mas, bpa=-24.59 degrees ! Estimated noise=1.35582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.116966 Jy ! Component: 100 - total flux cleaned = 0.187304 Jy ! Component: 150 - total flux cleaned = 0.233672 Jy ! Component: 200 - total flux cleaned = 0.266048 Jy ! Total flux subtracted in 200 components = 0.266048 Jy ! Clean residual min=-0.015522 max=0.016685 Jy/beam ! Clean residual mean=-0.000042 rms=0.005434 Jy/beam ! Combined flux in latest and established models = 2.22553 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 92 components and 2.22553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.981 mas, bmaj=9.851 mas, bpa=-7.103 degrees ! Estimated noise=1.7009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0394848 Jy ! Component: 100 - total flux cleaned = 0.06333 Jy ! Component: 150 - total flux cleaned = 0.0762683 Jy ! Component: 200 - total flux cleaned = 0.0825489 Jy ! Total flux subtracted in 200 components = 0.0825489 Jy ! Clean residual min=-0.013808 max=0.014784 Jy/beam ! Clean residual mean=-0.000024 rms=0.004481 Jy/beam ! Combined flux in latest and established models = 2.30808 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 150 components and 2.30808 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.606 mas, bpa=-24.59 degrees ! Estimated noise=1.35582 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014072 Jy ! Component: 100 - total flux cleaned = 0.00254032 Jy ! Component: 150 - total flux cleaned = 0.00356695 Jy ! Component: 200 - total flux cleaned = 0.00478007 Jy ! Total flux subtracted in 200 components = 0.00478007 Jy ! Clean residual min=-0.012816 max=0.011228 Jy/beam ! Clean residual mean=-0.000007 rms=0.003049 Jy/beam ! Combined flux in latest and established models = 2.31286 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 169 components and 2.31286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089496Jy sigma=1.128438 ! Fit after self-cal, rms=0.088964Jy sigma=1.115154 wmodel J0336+3218_S_2006_02_16_yyk\_map.mod ! Writing 169 model components to file: J0336+3218_S_2006_02_16_yyk_map.mod wobs J0336+3218_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0336+3218_S_2006_02_16_yyk_uvs.fits wwins J0336+3218_S_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J0336+3218_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00265023 Jy ! Component: 100 - total flux cleaned = -0.00335459 Jy ! Component: 150 - total flux cleaned = -0.00432707 Jy ! Component: 200 - total flux cleaned = -0.00536104 Jy ! Component: 250 - total flux cleaned = -0.00633841 Jy ! Component: 300 - total flux cleaned = -0.00699449 Jy ! Component: 350 - total flux cleaned = -0.00712052 Jy ! Component: 400 - total flux cleaned = -0.00785246 Jy ! Component: 450 - total flux cleaned = -0.00832488 Jy ! Component: 500 - total flux cleaned = -0.00889487 Jy ! Component: 550 - total flux cleaned = -0.00933681 Jy ! Component: 600 - total flux cleaned = -0.0103036 Jy ! Component: 650 - total flux cleaned = -0.010928 Jy ! Component: 700 - total flux cleaned = -0.0116352 Jy ! Component: 750 - total flux cleaned = -0.0122266 Jy ! Component: 800 - total flux cleaned = -0.0125152 Jy ! Component: 850 - total flux cleaned = -0.0129821 Jy ! Component: 900 - total flux cleaned = -0.013437 Jy ! Component: 950 - total flux cleaned = -0.0137014 Jy ! Component: 1000 - total flux cleaned = -0.0138724 Jy ! Component: 1050 - total flux cleaned = -0.0142061 Jy ! Component: 1100 - total flux cleaned = -0.0143714 Jy ! Component: 1150 - total flux cleaned = -0.0146895 Jy ! Component: 1200 - total flux cleaned = -0.0149221 Jy ! Component: 1250 - total flux cleaned = -0.0152245 Jy ! Component: 1300 - total flux cleaned = -0.0153706 Jy ! Component: 1350 - total flux cleaned = -0.0156569 Jy ! Component: 1400 - total flux cleaned = -0.0158669 Jy ! Component: 1450 - total flux cleaned = -0.0157309 Jy ! Component: 1500 - total flux cleaned = -0.016133 Jy ! Component: 1550 - total flux cleaned = -0.0163273 Jy ! Component: 1600 - total flux cleaned = -0.0164542 Jy ! Component: 1650 - total flux cleaned = -0.0168296 Jy ! Component: 1700 - total flux cleaned = -0.0170143 Jy ! Component: 1750 - total flux cleaned = -0.0171352 Jy ! Component: 1800 - total flux cleaned = -0.0173139 Jy ! Component: 1850 - total flux cleaned = -0.0175456 Jy ! Component: 1900 - total flux cleaned = -0.0178288 Jy ! Component: 1950 - total flux cleaned = -0.0178285 Jy ! Component: 2000 - total flux cleaned = -0.0179373 Jy ! Total flux subtracted in 2048 components = -0.018099 Jy ! Clean residual min=-0.002950 max=0.003071 Jy/beam ! Clean residual mean=-0.000021 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 2.29476 Jy keep ! Adding 137 model components to the UV plane model. ! The established model now contains 306 components and 2.29476 Jy ![Exited script file: muppet] wmap "J0336+3218_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 8.606 at -24.59 degrees (North through East) ! Clean map min=-0.0088581 max=1.2491 Jy/beam ! Writing clean map to FITS file: J0336+3218_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.24912 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110668 device "J0336+3218_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0336+3218_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.26579 0.26579 0.53158 1.06316 2.12632 4.25264 8.50528 17.0106 34.0211 68.0422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.249 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 8.606 at -24.59 degrees (North through East) ! Clean map min=-0.0088581 max=1.2491 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0336+3218_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0336+3218_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0336+3218_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:13:42 2006