! Started logfile: J0300+8202_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:10:32 2006 obs J0300+8202_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0300+8202_S_2006_02_16_yyk_uva.fits ! AN table 1: 879 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.992138 visibilities/baseline/integration-bin. ! Found source: J0300+8202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 156976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0300+8202_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.354654 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=10.63 mas, bpa=1.636 degrees ! Estimated noise=1.30336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.208887 Jy ! Component: 100 - total flux cleaned = 0.303056 Jy ! Total flux subtracted in 100 components = 0.303056 Jy ! Clean residual min=-0.031892 max=0.051602 Jy/beam ! Clean residual mean=0.000040 rms=0.012915 Jy/beam ! Combined flux in latest and established models = 0.303056 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.303056 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.199258Jy sigma=3.697976 ! Fit after self-cal, rms=0.198922Jy sigma=3.697396 ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=10.63 mas, bpa=1.645 degrees ! Estimated noise=1.30231 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=10.91 mas, bpa=1.838 degrees ! Estimated noise=0.70437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.100804 Jy ! Component: 100 - total flux cleaned = 0.159966 Jy ! Component: 150 - total flux cleaned = 0.196591 Jy ! Component: 200 - total flux cleaned = 0.220458 Jy ! Total flux subtracted in 200 components = 0.220458 Jy ! Clean residual min=-0.034712 max=0.050189 Jy/beam ! Clean residual mean=-0.000311 rms=0.013525 Jy/beam ! Combined flux in latest and established models = 0.523514 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 57 components and 0.523514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154344Jy sigma=2.863255 ! Fit after self-cal, rms=0.154040Jy sigma=2.854855 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 10.91 at 1.838 degrees (North through East) ! Clean map min=-0.034932 max=0.26496 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.948163 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.09 HN 1.04 KP 0.75 ! LA 1.08 MK 1.37 NL 1.69 OV 0.85 ! PT 0.89 SC 0.86 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.917561 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.14 HN 1.02 KP 0.77 ! LA 1.02 MK 1.55 NL 1.64 OV 0.88 ! PT 0.88 SC 0.91 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.902707 ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.25 HN 0.92 KP 0.79 ! LA 0.80 MK 1.57 NL 1.47 OV 0.99 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.959081 ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.21 HN 0.90 KP 0.74 ! LA 0.67 MK 1.42 NL 1.50 OV 0.84 ! PT 0.85 SC 1.15 ! ! ! Fit before self-cal, rms=0.154040Jy sigma=2.854855 ! Fit after self-cal, rms=0.125611Jy sigma=2.446010 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125611Jy sigma=2.446010 ! Fit after self-cal, rms=0.126919Jy sigma=2.435027 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=11.09 mas, bpa=-1.596 degrees ! Estimated noise=0.617003 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0426564 Jy ! Component: 100 - total flux cleaned = -0.0609841 Jy ! Component: 150 - total flux cleaned = -0.0699581 Jy ! Component: 200 - total flux cleaned = -0.0744081 Jy ! Total flux subtracted in 200 components = -0.0744081 Jy ! Clean residual min=-0.019693 max=0.031913 Jy/beam ! Clean residual mean=-0.000061 rms=0.007654 Jy/beam ! Combined flux in latest and established models = 0.449106 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 86 components and 0.449106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119371Jy sigma=2.196528 ! Fit after self-cal, rms=0.119056Jy sigma=2.191895 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119056Jy sigma=2.191895 ! Fit after self-cal, rms=0.116715Jy sigma=2.137181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000939284 Jy ! Component: 100 - total flux cleaned = -0.00107279 Jy ! Component: 150 - total flux cleaned = -0.00130152 Jy ! Component: 200 - total flux cleaned = -0.00139797 Jy ! Total flux subtracted in 200 components = -0.00139797 Jy ! Clean residual min=-0.019404 max=0.031554 Jy/beam ! Clean residual mean=-0.000048 rms=0.007589 Jy/beam ! Combined flux in latest and established models = 0.447708 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.447708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116708Jy sigma=2.131964 ! Fit after self-cal, rms=0.116460Jy sigma=2.129562 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.617 x 11.09 at -1.596 degrees (North through East) ! Clean map min=-0.01915 max=0.24641 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116460Jy sigma=2.129562 ! Fit after self-cal, rms=0.118078Jy sigma=2.099355 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118078Jy sigma=2.099355 ! Fit after self-cal, rms=0.118081Jy sigma=2.099247 ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=11.2 mas, bpa=-1.932 degrees ! Estimated noise=0.620718 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270819 Jy ! Component: 100 - total flux cleaned = -0.00379732 Jy ! Component: 150 - total flux cleaned = -0.00459071 Jy ! Component: 200 - total flux cleaned = -0.00477642 Jy ! Total flux subtracted in 200 components = -0.00477642 Jy ! Clean residual min=-0.019439 max=0.030881 Jy/beam ! Clean residual mean=-0.000050 rms=0.007475 Jy/beam ! Combined flux in latest and established models = 0.442931 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.442931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117623Jy sigma=2.092416 ! Fit after self-cal, rms=0.117426Jy sigma=2.091270 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117426Jy sigma=2.091270 ! Fit after self-cal, rms=0.118274Jy sigma=2.059523 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118274Jy sigma=2.059523 ! Fit after self-cal, rms=0.118284Jy sigma=2.059507 ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=11.27 mas, bpa=-2.076 degrees ! Estimated noise=0.621821 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00236265 Jy ! Component: 100 - total flux cleaned = -0.00342001 Jy ! Component: 150 - total flux cleaned = -0.00400624 Jy ! Component: 200 - total flux cleaned = -0.00416884 Jy ! Total flux subtracted in 200 components = -0.00416884 Jy ! Clean residual min=-0.019314 max=0.030883 Jy/beam ! Clean residual mean=-0.000045 rms=0.007447 Jy/beam ! Combined flux in latest and established models = 0.438763 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.438763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117979Jy sigma=2.054562 ! Fit after self-cal, rms=0.117806Jy sigma=2.053689 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.79 mas, bmaj=13.61 mas, bpa=4.039 degrees ! Estimated noise=0.751723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513557 Jy ! Component: 100 - total flux cleaned = 0.00490649 Jy ! Component: 150 - total flux cleaned = 0.00470248 Jy ! Component: 200 - total flux cleaned = 0.00439781 Jy ! Total flux subtracted in 200 components = 0.00439781 Jy ! Clean residual min=-0.026054 max=0.042556 Jy/beam ! Clean residual mean=-0.000086 rms=0.010712 Jy/beam ! Combined flux in latest and established models = 0.44316 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 100 components and 0.44316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119262Jy sigma=2.071239 ! Fit after self-cal, rms=0.118634Jy sigma=2.066000 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=10.44 mas, bpa=-0.008311 degrees ! Estimated noise=1.26264 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.198248 Jy ! Component: 100 - total flux cleaned = 0.282207 Jy ! Component: 150 - total flux cleaned = 0.330416 Jy ! Component: 200 - total flux cleaned = 0.36088 Jy ! Total flux subtracted in 200 components = 0.36088 Jy ! Clean residual min=-0.021991 max=0.028753 Jy/beam ! Clean residual mean=0.000018 rms=0.007443 Jy/beam ! Combined flux in latest and established models = 0.36088 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.36088 Jy ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=11.27 mas, bpa=-2.076 degrees ! Estimated noise=0.621821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438073 Jy ! Component: 100 - total flux cleaned = 0.0626263 Jy ! Component: 150 - total flux cleaned = 0.0716755 Jy ! Component: 200 - total flux cleaned = 0.0733592 Jy ! Total flux subtracted in 200 components = 0.0733592 Jy ! Clean residual min=-0.019642 max=0.029879 Jy/beam ! Clean residual mean=-0.000045 rms=0.007532 Jy/beam ! Combined flux in latest and established models = 0.43424 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.434239 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.79 mas, bmaj=13.61 mas, bpa=4.039 degrees ! Estimated noise=0.751723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00752789 Jy ! Component: 100 - total flux cleaned = 0.00778639 Jy ! Component: 150 - total flux cleaned = 0.00778326 Jy ! Component: 200 - total flux cleaned = 0.00777946 Jy ! Total flux subtracted in 200 components = 0.00777946 Jy ! Clean residual min=-0.026268 max=0.042096 Jy/beam ! Clean residual mean=-0.000076 rms=0.010698 Jy/beam ! Combined flux in latest and established models = 0.442019 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.442019 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=11.27 mas, bpa=-2.076 degrees ! Estimated noise=0.621821 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0065361 Jy ! Component: 100 - total flux cleaned = -0.00591026 Jy ! Component: 150 - total flux cleaned = -0.00561511 Jy ! Component: 200 - total flux cleaned = -0.00560754 Jy ! Total flux subtracted in 200 components = -0.00560754 Jy ! Clean residual min=-0.019695 max=0.030417 Jy/beam ! Clean residual mean=-0.000049 rms=0.007456 Jy/beam ! Combined flux in latest and established models = 0.436411 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.436411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118711Jy sigma=2.063023 ! Fit after self-cal, rms=0.118494Jy sigma=2.060411 wmodel J0300+8202_S_2006_02_16_yyk\_map.mod ! Writing 62 model components to file: J0300+8202_S_2006_02_16_yyk_map.mod wobs J0300+8202_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0300+8202_S_2006_02_16_yyk_uvs.fits wwins J0300+8202_S_2006_02_16_yyk\_map.win ! wwins: Wrote 1 windows to J0300+8202_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121317 Jy ! Component: 100 - total flux cleaned = 0.0226113 Jy ! Component: 150 - total flux cleaned = 0.03159 Jy ! Component: 200 - total flux cleaned = 0.0377947 Jy ! Component: 250 - total flux cleaned = 0.043295 Jy ! Component: 300 - total flux cleaned = 0.048501 Jy ! Component: 350 - total flux cleaned = 0.053439 Jy ! Component: 400 - total flux cleaned = 0.0573118 Jy ! Component: 450 - total flux cleaned = 0.0612574 Jy ! Component: 500 - total flux cleaned = 0.0650268 Jy ! Component: 550 - total flux cleaned = 0.068876 Jy ! Component: 600 - total flux cleaned = 0.0728032 Jy ! Component: 650 - total flux cleaned = 0.076141 Jy ! Component: 700 - total flux cleaned = 0.07957 Jy ! Component: 750 - total flux cleaned = 0.0818493 Jy ! Component: 800 - total flux cleaned = 0.0844629 Jy ! Component: 850 - total flux cleaned = 0.0869975 Jy ! Component: 900 - total flux cleaned = 0.0894593 Jy ! Component: 950 - total flux cleaned = 0.0916708 Jy ! Component: 1000 - total flux cleaned = 0.0940049 Jy ! Component: 1050 - total flux cleaned = 0.096107 Jy ! Component: 1100 - total flux cleaned = 0.0979876 Jy ! Component: 1150 - total flux cleaned = 0.0999924 Jy ! Component: 1200 - total flux cleaned = 0.101949 Jy ! Component: 1250 - total flux cleaned = 0.103865 Jy ! Component: 1300 - total flux cleaned = 0.105741 Jy ! Component: 1350 - total flux cleaned = 0.10773 Jy ! Component: 1400 - total flux cleaned = 0.109526 Jy ! Component: 1450 - total flux cleaned = 0.11173 Jy ! Component: 1500 - total flux cleaned = 0.113894 Jy ! Component: 1550 - total flux cleaned = 0.115881 Jy ! Component: 1600 - total flux cleaned = 0.11825 Jy ! Component: 1650 - total flux cleaned = 0.120307 Jy ! Component: 1700 - total flux cleaned = 0.122197 Jy ! Component: 1750 - total flux cleaned = 0.123662 Jy ! Component: 1800 - total flux cleaned = 0.124976 Jy ! Component: 1850 - total flux cleaned = 0.126788 Jy ! Component: 1900 - total flux cleaned = 0.12819 Jy ! Component: 1950 - total flux cleaned = 0.129449 Jy ! Component: 2000 - total flux cleaned = 0.130691 Jy ! Total flux subtracted in 2048 components = 0.132164 Jy ! Clean residual min=-0.006846 max=0.008772 Jy/beam ! Clean residual mean=0.000031 rms=0.002798 Jy/beam ! Combined flux in latest and established models = 0.568575 Jy keep ! Adding 178 model components to the UV plane model. ! The established model now contains 240 components and 0.568575 Jy ![Exited script file: muppet] wmap "J0300+8202_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.65 x 11.27 at -2.076 degrees (North through East) ! Clean map min=-0.014156 max=0.25003 Jy/beam ! Writing clean map to FITS file: J0300+8202_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.250035 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00278503 device "J0300+8202_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0300+8202_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.34157 3.34157 6.68313 13.3663 26.7325 53.465 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0083 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.25 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.65 x 11.27 at -2.076 degrees (North through East) ! Clean map min=-0.014156 max=0.25003 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0300+8202_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0300+8202_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0300+8202_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:10:59 2006