! Started logfile: J0136+4751_S_2006_02_23_yyk_uvs.log on Wed Jul 5 11:03:17 2006 obs J0136+4751_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0136+4751_S_2006_02_23_yyk_uva.fits ! AN table 1: 260 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.902137 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 42220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0136+4751_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.23102 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=8.918 mas, bpa=38.88 degrees ! Estimated noise=1.7739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.99061 Jy ! Component: 100 - total flux cleaned = 1.31775 Jy ! Total flux subtracted in 100 components = 1.31775 Jy ! Clean residual min=-0.036209 max=0.094246 Jy/beam ! Clean residual mean=0.001130 rms=0.016593 Jy/beam ! Combined flux in latest and established models = 1.31775 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.31775 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.257878Jy sigma=4.395083 ! Fit after self-cal, rms=0.257397Jy sigma=4.384596 ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=8.918 mas, bpa=38.88 degrees ! Estimated noise=1.7739 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=9.526 mas, bpa=40.22 degrees ! Estimated noise=1.27632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.143636 Jy ! Component: 100 - total flux cleaned = 0.203387 Jy ! Component: 150 - total flux cleaned = 0.236437 Jy ! Component: 200 - total flux cleaned = 0.256799 Jy ! Total flux subtracted in 200 components = 0.256799 Jy ! Clean residual min=-0.025683 max=0.029907 Jy/beam ! Clean residual mean=-0.000792 rms=0.006936 Jy/beam ! Combined flux in latest and established models = 1.57455 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 79 model components to the UV plane model. ! The established model now contains 86 components and 1.57455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177767Jy sigma=3.029471 ! Fit after self-cal, rms=0.177464Jy sigma=3.023664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 9.526 at 40.22 degrees (North through East) ! Clean map min=-0.02438 max=1.0715 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01402 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 0.98 KP 0.95 ! LA 1.20 MK 0.94 NL 0.92 OV 0.99 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99302 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.02 KP 0.97 ! LA 1.16 MK 1.01 NL 0.95 OV 1.00 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.972179 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 1.02 KP 0.97 ! LA 0.92 MK 1.14 NL 1.04 OV 1.04 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04146 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.95 KP 0.88 ! LA 0.78 MK 1.12 NL 0.98 OV 0.87 ! PT 0.93 SC 1.06 ! ! ! Fit before self-cal, rms=0.177464Jy sigma=3.023664 ! Fit after self-cal, rms=0.090818Jy sigma=1.701581 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090818Jy sigma=1.701581 ! Fit after self-cal, rms=0.090819Jy sigma=1.701500 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=9.57 mas, bpa=39.97 degrees ! Estimated noise=1.27624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464641 Jy ! Component: 100 - total flux cleaned = 0.00822322 Jy ! Component: 150 - total flux cleaned = 0.0101822 Jy ! Component: 200 - total flux cleaned = 0.010549 Jy ! Total flux subtracted in 200 components = 0.010549 Jy ! Clean residual min=-0.007403 max=0.010849 Jy/beam ! Clean residual mean=-0.000100 rms=0.002531 Jy/beam ! Combined flux in latest and established models = 1.58509 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 1.58509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089082Jy sigma=1.674258 ! Fit after self-cal, rms=0.088942Jy sigma=1.671848 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088942Jy sigma=1.671848 ! Fit after self-cal, rms=0.084365Jy sigma=1.593071 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147412 Jy ! Component: 100 - total flux cleaned = 0.019418 Jy ! Component: 150 - total flux cleaned = 0.0208895 Jy ! Component: 200 - total flux cleaned = 0.0220565 Jy ! Total flux subtracted in 200 components = 0.0220565 Jy ! Clean residual min=-0.006160 max=0.005639 Jy/beam ! Clean residual mean=-0.000040 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 1.60715 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 134 components and 1.60715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082566Jy sigma=1.554829 ! Fit after self-cal, rms=0.082231Jy sigma=1.548949 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 9.57 at 39.97 degrees (North through East) ! Clean map min=-0.006052 max=1.0841 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082231Jy sigma=1.548949 ! Fit after self-cal, rms=0.054967Jy sigma=0.994628 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054967Jy sigma=0.994628 ! Fit after self-cal, rms=0.054944Jy sigma=0.994223 ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=9.555 mas, bpa=39.85 degrees ! Estimated noise=1.27504 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306318 Jy ! Component: 100 - total flux cleaned = 0.00581808 Jy ! Component: 150 - total flux cleaned = 0.00692045 Jy ! Component: 200 - total flux cleaned = 0.00733523 Jy ! Total flux subtracted in 200 components = 0.00733523 Jy ! Clean residual min=-0.005375 max=0.004760 Jy/beam ! Clean residual mean=0.000029 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 1.61449 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 154 components and 1.61449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054385Jy sigma=0.982336 ! Fit after self-cal, rms=0.054333Jy sigma=0.981571 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054333Jy sigma=0.981571 ! Fit after self-cal, rms=0.051604Jy sigma=0.921680 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051604Jy sigma=0.921680 ! Fit after self-cal, rms=0.051605Jy sigma=0.921675 ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=9.548 mas, bpa=39.78 degrees ! Estimated noise=1.27615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175893 Jy ! Component: 100 - total flux cleaned = 0.00336114 Jy ! Component: 150 - total flux cleaned = 0.00392046 Jy ! Component: 200 - total flux cleaned = 0.00406323 Jy ! Total flux subtracted in 200 components = 0.00406323 Jy ! Clean residual min=-0.004778 max=0.004375 Jy/beam ! Clean residual mean=0.000048 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 1.61855 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 174 components and 1.61855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051360Jy sigma=0.916749 ! Fit after self-cal, rms=0.051336Jy sigma=0.916482 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.579 mas, bmaj=10.46 mas, bpa=39.54 degrees ! Estimated noise=1.53685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128491 Jy ! Component: 100 - total flux cleaned = 0.00168547 Jy ! Component: 150 - total flux cleaned = 0.00206373 Jy ! Component: 200 - total flux cleaned = 0.00234014 Jy ! Total flux subtracted in 200 components = 0.00234014 Jy ! Clean residual min=-0.004029 max=0.004286 Jy/beam ! Clean residual mean=0.000114 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 1.62089 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 191 components and 1.62089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051347Jy sigma=0.915884 ! Fit after self-cal, rms=0.051335Jy sigma=0.915767 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=8.919 mas, bpa=38.89 degrees ! Estimated noise=1.77036 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.982065 Jy ! Component: 100 - total flux cleaned = 1.29874 Jy ! Component: 150 - total flux cleaned = 1.41789 Jy ! Component: 200 - total flux cleaned = 1.47424 Jy ! Total flux subtracted in 200 components = 1.47424 Jy ! Clean residual min=-0.011870 max=0.020035 Jy/beam ! Clean residual mean=0.000295 rms=0.004649 Jy/beam ! Combined flux in latest and established models = 1.47424 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 1.47424 Jy ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=9.548 mas, bpa=39.78 degrees ! Estimated noise=1.27615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476328 Jy ! Component: 100 - total flux cleaned = 0.0754831 Jy ! Component: 150 - total flux cleaned = 0.0939968 Jy ! Component: 200 - total flux cleaned = 0.107172 Jy ! Total flux subtracted in 200 components = 0.107172 Jy ! Clean residual min=-0.005607 max=0.007184 Jy/beam ! Clean residual mean=0.000013 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 1.58141 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 112 components and 1.58141 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.579 mas, bmaj=10.46 mas, bpa=39.54 degrees ! Estimated noise=1.53685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147007 Jy ! Component: 100 - total flux cleaned = 0.023297 Jy ! Component: 150 - total flux cleaned = 0.0288446 Jy ! Component: 200 - total flux cleaned = 0.0326675 Jy ! Total flux subtracted in 200 components = 0.0326675 Jy ! Clean residual min=-0.004062 max=0.004091 Jy/beam ! Clean residual mean=0.000088 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 1.61408 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 172 components and 1.61408 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=9.548 mas, bpa=39.78 degrees ! Estimated noise=1.27615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284176 Jy ! Component: 100 - total flux cleaned = 0.00356739 Jy ! Component: 150 - total flux cleaned = 0.00387495 Jy ! Component: 200 - total flux cleaned = 0.00414831 Jy ! Total flux subtracted in 200 components = 0.00414831 Jy ! Clean residual min=-0.004357 max=0.003625 Jy/beam ! Clean residual mean=0.000051 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 1.61823 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 207 components and 1.61823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051492Jy sigma=0.918770 ! Fit after self-cal, rms=0.051420Jy sigma=0.918049 wmodel J0136+4751_S_2006_02_23_yyk\_map.mod ! Writing 207 model components to file: J0136+4751_S_2006_02_23_yyk_map.mod wobs J0136+4751_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0136+4751_S_2006_02_23_yyk_uvs.fits wwins J0136+4751_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J0136+4751_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101529 Jy ! Component: 100 - total flux cleaned = -0.000951522 Jy ! Component: 150 - total flux cleaned = -0.000775811 Jy ! Component: 200 - total flux cleaned = -0.0009422 Jy ! Component: 250 - total flux cleaned = -0.000887478 Jy ! Component: 300 - total flux cleaned = -0.000736902 Jy ! Component: 350 - total flux cleaned = -0.000496629 Jy ! Component: 400 - total flux cleaned = -0.000496357 Jy ! Component: 450 - total flux cleaned = -0.000631918 Jy ! Component: 500 - total flux cleaned = -0.00063241 Jy ! Component: 550 - total flux cleaned = -0.000545542 Jy ! Component: 600 - total flux cleaned = -0.000378132 Jy ! Component: 650 - total flux cleaned = -0.000418441 Jy ! Component: 700 - total flux cleaned = -0.000220011 Jy ! Component: 750 - total flux cleaned = -0.000102552 Jy ! Component: 800 - total flux cleaned = 0.000239324 Jy ! Component: 850 - total flux cleaned = 0.000501455 Jy ! Component: 900 - total flux cleaned = 0.000758658 Jy ! Component: 950 - total flux cleaned = 0.000976149 Jy ! Component: 1000 - total flux cleaned = 0.00136602 Jy ! Component: 1050 - total flux cleaned = 0.00143571 Jy ! Component: 1100 - total flux cleaned = 0.00167599 Jy ! Component: 1150 - total flux cleaned = 0.00191126 Jy ! Component: 1200 - total flux cleaned = 0.00197729 Jy ! Component: 1250 - total flux cleaned = 0.00220549 Jy ! Component: 1300 - total flux cleaned = 0.00223817 Jy ! Component: 1350 - total flux cleaned = 0.00242845 Jy ! Component: 1400 - total flux cleaned = 0.00261571 Jy ! Component: 1450 - total flux cleaned = 0.00267729 Jy ! Component: 1500 - total flux cleaned = 0.00273816 Jy ! Component: 1550 - total flux cleaned = 0.00285881 Jy ! Component: 1600 - total flux cleaned = 0.00288892 Jy ! Component: 1650 - total flux cleaned = 0.00303461 Jy ! Component: 1700 - total flux cleaned = 0.00306342 Jy ! Component: 1750 - total flux cleaned = 0.00311986 Jy ! Component: 1800 - total flux cleaned = 0.00311988 Jy ! Component: 1850 - total flux cleaned = 0.00311979 Jy ! Component: 1900 - total flux cleaned = 0.00314673 Jy ! Component: 1950 - total flux cleaned = 0.00311939 Jy ! Component: 2000 - total flux cleaned = 0.00319832 Jy ! Total flux subtracted in 2048 components = 0.00309299 Jy ! Clean residual min=-0.001404 max=0.001441 Jy/beam ! Clean residual mean=0.000044 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 1.62132 Jy keep ! Adding 136 model components to the UV plane model. ! The established model now contains 343 components and 1.62132 Jy ![Exited script file: muppet] wmap "J0136+4751_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.624 x 9.548 at 39.78 degrees (North through East) ! Clean map min=-0.0032924 max=1.0876 Jy/beam ! Writing clean map to FITS file: J0136+4751_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.08757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000560498 device "J0136+4751_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0136+4751_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.15461 0.15461 0.309219 0.618439 1.23688 2.47376 4.94751 9.89502 19.79 39.5801 79.1602 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.624 x 9.548 at 39.78 degrees (North through East) ! Clean map min=-0.0032924 max=1.0876 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0136+4751_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0136+4751_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0136+4751_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:03:53 2006