! Started logfile: J0136+4751_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:02:50 2006 obs J0136+4751_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0136+4751_S_2006_02_16_yyk_uva.fits ! AN table 1: 261 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688293 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 32336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0136+4751_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.49857 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.222 mas, bmaj=9.2 mas, bpa=28.48 degrees ! Estimated noise=1.9547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.2064 Jy ! Component: 100 - total flux cleaned = 1.50506 Jy ! Total flux subtracted in 100 components = 1.50506 Jy ! Clean residual min=-0.066193 max=0.110397 Jy/beam ! Clean residual mean=0.001311 rms=0.023975 Jy/beam ! Combined flux in latest and established models = 1.50506 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.50506 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.360689Jy sigma=5.311335 ! Fit after self-cal, rms=0.360572Jy sigma=5.307458 ! Inverting map and beam ! Estimated beam: bmin=4.222 mas, bmaj=9.2 mas, bpa=28.48 degrees ! Estimated noise=1.9547 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.084 mas, bmaj=10.01 mas, bpa=29.95 degrees ! Estimated noise=1.5239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125296 Jy ! Component: 100 - total flux cleaned = 0.180369 Jy ! Component: 150 - total flux cleaned = 0.193831 Jy ! Component: 200 - total flux cleaned = 0.2013 Jy ! Total flux subtracted in 200 components = 0.2013 Jy ! Clean residual min=-0.057895 max=0.080479 Jy/beam ! Clean residual mean=-0.001265 rms=0.018506 Jy/beam ! Combined flux in latest and established models = 1.70636 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 57 components and 1.70636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.319200Jy sigma=4.591697 ! Fit after self-cal, rms=0.318921Jy sigma=4.586723 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.084 x 10.01 at 29.95 degrees (North through East) ! Clean map min=-0.059896 max=1.3871 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01278 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 0.88 KP 0.92 ! LA 1.16 MK 0.86 NL 1.16 OV 0.97 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.981449 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.92 KP 0.95 ! LA 1.14 MK 0.94 NL 1.23 OV 0.99 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01599 ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 0.99 HN 0.90 KP 0.94 ! LA 0.90 MK 1.07 NL 1.32 OV 1.01 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04019 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.84 KP 0.87 ! LA 0.77 MK 1.04 NL 1.25 OV 0.86 ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.318921Jy sigma=4.586723 ! Fit after self-cal, rms=0.144847Jy sigma=2.307906 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144847Jy sigma=2.307906 ! Fit after self-cal, rms=0.144829Jy sigma=2.307820 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.995 mas, bmaj=9.831 mas, bpa=29.32 degrees ! Estimated noise=1.52708 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398672 Jy ! Component: 100 - total flux cleaned = 0.0459953 Jy ! Component: 150 - total flux cleaned = 0.0486812 Jy ! Component: 200 - total flux cleaned = 0.0507563 Jy ! Total flux subtracted in 200 components = 0.0507563 Jy ! Clean residual min=-0.016438 max=0.017453 Jy/beam ! Clean residual mean=0.000030 rms=0.004930 Jy/beam ! Combined flux in latest and established models = 1.75712 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 1.75712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133663Jy sigma=2.124264 ! Fit after self-cal, rms=0.133537Jy sigma=2.122585 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133537Jy sigma=2.122585 ! Fit after self-cal, rms=0.121801Jy sigma=1.872023 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207721 Jy ! Component: 100 - total flux cleaned = 0.00209119 Jy ! Component: 150 - total flux cleaned = 0.00234024 Jy ! Component: 200 - total flux cleaned = 0.00234033 Jy ! Total flux subtracted in 200 components = 0.00234033 Jy ! Clean residual min=-0.016690 max=0.016194 Jy/beam ! Clean residual mean=0.000024 rms=0.004730 Jy/beam ! Combined flux in latest and established models = 1.75946 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 1.75946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120294Jy sigma=1.854123 ! Fit after self-cal, rms=0.119604Jy sigma=1.839573 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.995 x 9.831 at 29.32 degrees (North through East) ! Clean map min=-0.0157 max=1.405 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119604Jy sigma=1.839573 ! Fit after self-cal, rms=0.096058Jy sigma=1.421681 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096058Jy sigma=1.421681 ! Fit after self-cal, rms=0.096007Jy sigma=1.420364 ! Inverting map and beam ! Estimated beam: bmin=5.006 mas, bmaj=9.756 mas, bpa=30.09 degrees ! Estimated noise=1.5239 mJy/beam. ! Added new window around map position (-10, 8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110348 Jy ! Component: 100 - total flux cleaned = 0.01151 Jy ! Component: 150 - total flux cleaned = 0.0111416 Jy ! Component: 200 - total flux cleaned = 0.0105184 Jy ! Total flux subtracted in 200 components = 0.0105184 Jy ! Clean residual min=-0.008887 max=0.009434 Jy/beam ! Clean residual mean=0.000113 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 1.76998 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 99 components and 1.76998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092513Jy sigma=1.340500 ! Fit after self-cal, rms=0.092394Jy sigma=1.338651 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092394Jy sigma=1.338651 ! Fit after self-cal, rms=0.083543Jy sigma=1.199247 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083543Jy sigma=1.199247 ! Fit after self-cal, rms=0.083542Jy sigma=1.199231 ! Inverting map and beam ! Estimated beam: bmin=5.017 mas, bmaj=9.739 mas, bpa=30.25 degrees ! Estimated noise=1.52321 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 7.36646e-06 Jy ! Component: 100 - total flux cleaned = 0.000290193 Jy ! Component: 150 - total flux cleaned = 0.000290968 Jy ! Component: 200 - total flux cleaned = 0.000719336 Jy ! Total flux subtracted in 200 components = 0.000719336 Jy ! Clean residual min=-0.007629 max=0.007487 Jy/beam ! Clean residual mean=0.000140 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 1.7707 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 115 components and 1.7707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082383Jy sigma=1.174070 ! Fit after self-cal, rms=0.082336Jy sigma=1.173368 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.027 mas, bmaj=11.17 mas, bpa=40.57 degrees ! Estimated noise=1.71933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225931 Jy ! Component: 100 - total flux cleaned = -0.00197005 Jy ! Component: 150 - total flux cleaned = -0.00143903 Jy ! Component: 200 - total flux cleaned = -0.000963876 Jy ! Total flux subtracted in 200 components = -0.000963876 Jy ! Clean residual min=-0.007875 max=0.007919 Jy/beam ! Clean residual mean=0.000242 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 1.76973 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 136 components and 1.76973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081954Jy sigma=1.166740 ! Fit after self-cal, rms=0.081931Jy sigma=1.166395 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.174 mas, bmaj=9.083 mas, bpa=28.67 degrees ! Estimated noise=1.92182 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.19236 Jy ! Component: 100 - total flux cleaned = 1.50104 Jy ! Component: 150 - total flux cleaned = 1.62095 Jy ! Component: 200 - total flux cleaned = 1.67363 Jy ! Total flux subtracted in 200 components = 1.67363 Jy ! Clean residual min=-0.018557 max=0.021845 Jy/beam ! Clean residual mean=0.000308 rms=0.005712 Jy/beam ! Combined flux in latest and established models = 1.67362 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.67362 Jy ! Inverting map and beam ! Estimated beam: bmin=5.017 mas, bmaj=9.739 mas, bpa=30.25 degrees ! Estimated noise=1.52321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424906 Jy ! Component: 100 - total flux cleaned = 0.0661651 Jy ! Component: 150 - total flux cleaned = 0.0737001 Jy ! Component: 200 - total flux cleaned = 0.0774518 Jy ! Total flux subtracted in 200 components = 0.0774518 Jy ! Clean residual min=-0.010422 max=0.011606 Jy/beam ! Clean residual mean=0.000131 rms=0.003215 Jy/beam ! Combined flux in latest and established models = 1.75108 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 83 components and 1.75108 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.027 mas, bmaj=11.17 mas, bpa=40.57 degrees ! Estimated noise=1.71933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00882019 Jy ! Component: 100 - total flux cleaned = 0.00999195 Jy ! Component: 150 - total flux cleaned = 0.0111879 Jy ! Component: 200 - total flux cleaned = 0.0119161 Jy ! Total flux subtracted in 200 components = 0.0119161 Jy ! Clean residual min=-0.007974 max=0.009326 Jy/beam ! Clean residual mean=0.000222 rms=0.002754 Jy/beam ! Combined flux in latest and established models = 1.76299 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 141 components and 1.76299 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.017 mas, bmaj=9.739 mas, bpa=30.25 degrees ! Estimated noise=1.52321 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020571 Jy ! Component: 100 - total flux cleaned = 0.000649684 Jy ! Component: 150 - total flux cleaned = 0.00126016 Jy ! Component: 200 - total flux cleaned = 0.00197852 Jy ! Total flux subtracted in 200 components = 0.00197852 Jy ! Clean residual min=-0.007590 max=0.006867 Jy/beam ! Clean residual mean=0.000142 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 1.76497 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 166 components and 1.76497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081452Jy sigma=1.163073 ! Fit after self-cal, rms=0.081381Jy sigma=1.161800 wmodel J0136+4751_S_2006_02_16_yyk\_map.mod ! Writing 166 model components to file: J0136+4751_S_2006_02_16_yyk_map.mod wobs J0136+4751_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0136+4751_S_2006_02_16_yyk_uvs.fits wwins J0136+4751_S_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J0136+4751_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145747 Jy ! Component: 100 - total flux cleaned = -0.00257582 Jy ! Component: 150 - total flux cleaned = -0.00267706 Jy ! Component: 200 - total flux cleaned = -0.00249245 Jy ! Component: 250 - total flux cleaned = -0.00249496 Jy ! Component: 300 - total flux cleaned = -0.00258319 Jy ! Component: 350 - total flux cleaned = -0.00266327 Jy ! Component: 400 - total flux cleaned = -0.00266531 Jy ! Component: 450 - total flux cleaned = -0.00259262 Jy ! Component: 500 - total flux cleaned = -0.00273506 Jy ! Component: 550 - total flux cleaned = -0.00287056 Jy ! Component: 600 - total flux cleaned = -0.00300272 Jy ! Component: 650 - total flux cleaned = -0.0031979 Jy ! Component: 700 - total flux cleaned = -0.00344954 Jy ! Component: 750 - total flux cleaned = -0.00369281 Jy ! Component: 800 - total flux cleaned = -0.00357273 Jy ! Component: 850 - total flux cleaned = -0.00357091 Jy ! Component: 900 - total flux cleaned = -0.00345604 Jy ! Component: 950 - total flux cleaned = -0.00334496 Jy ! Component: 1000 - total flux cleaned = -0.00323707 Jy ! Component: 1050 - total flux cleaned = -0.0032369 Jy ! Component: 1100 - total flux cleaned = -0.00297837 Jy ! Component: 1150 - total flux cleaned = -0.00287735 Jy ! Component: 1200 - total flux cleaned = -0.00282632 Jy ! Component: 1250 - total flux cleaned = -0.00243686 Jy ! Component: 1300 - total flux cleaned = -0.00229416 Jy ! Component: 1350 - total flux cleaned = -0.00220051 Jy ! Component: 1400 - total flux cleaned = -0.00201672 Jy ! Component: 1450 - total flux cleaned = -0.0018817 Jy ! Component: 1500 - total flux cleaned = -0.00179203 Jy ! Component: 1550 - total flux cleaned = -0.00157415 Jy ! Component: 1600 - total flux cleaned = -0.00140242 Jy ! Component: 1650 - total flux cleaned = -0.00123423 Jy ! Component: 1700 - total flux cleaned = -0.00115128 Jy ! Component: 1750 - total flux cleaned = -0.000988157 Jy ! Component: 1800 - total flux cleaned = -0.000947934 Jy ! Component: 1850 - total flux cleaned = -0.000869315 Jy ! Component: 1900 - total flux cleaned = -0.000752645 Jy ! Component: 1950 - total flux cleaned = -0.00071396 Jy ! Component: 2000 - total flux cleaned = -0.000638233 Jy ! Total flux subtracted in 2048 components = -0.000563791 Jy ! Clean residual min=-0.002192 max=0.002056 Jy/beam ! Clean residual mean=0.000177 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 1.76441 Jy keep ! Adding 155 model components to the UV plane model. ! The established model now contains 321 components and 1.76441 Jy ![Exited script file: muppet] wmap "J0136+4751_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.017 x 9.739 at 30.25 degrees (North through East) ! Clean map min=-0.012582 max=1.4075 Jy/beam ! Writing clean map to FITS file: J0136+4751_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.4075 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000787879 device "J0136+4751_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0136+4751_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.167932 0.167932 0.335864 0.671728 1.34346 2.68691 5.37382 10.7476 21.4953 42.9906 85.9811 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.407 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.017 x 9.739 at 30.25 degrees (North through East) ! Clean map min=-0.012582 max=1.4075 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0136+4751_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0136+4751_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0136+4751_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:03:16 2006