! Started logfile: J0117+8928_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:02:05 2006 obs J0117+8928_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0117+8928_S_2006_02_16_yyk_uva.fits ! AN table 1: 879 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981292 visibilities/baseline/integration-bin. ! Found source: J0117+8928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 155260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0117+8928_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.229255 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=10.75 mas, bpa=-8.132 degrees ! Estimated noise=1.69995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0946967 Jy ! Component: 100 - total flux cleaned = 0.138995 Jy ! Total flux subtracted in 100 components = 0.138995 Jy ! Clean residual min=-0.022007 max=0.029998 Jy/beam ! Clean residual mean=0.000317 rms=0.008056 Jy/beam ! Combined flux in latest and established models = 0.138995 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.138995 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.169553Jy sigma=2.419716 ! Fit after self-cal, rms=0.169256Jy sigma=2.413226 ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=10.75 mas, bpa=-8.132 degrees ! Estimated noise=1.69995 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.67 mas, bpa=-10.7 degrees ! Estimated noise=0.994494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.055203 Jy ! Component: 100 - total flux cleaned = 0.0846767 Jy ! Component: 150 - total flux cleaned = 0.102602 Jy ! Component: 200 - total flux cleaned = 0.113814 Jy ! Total flux subtracted in 200 components = 0.113814 Jy ! Clean residual min=-0.029814 max=0.052955 Jy/beam ! Clean residual mean=0.000277 rms=0.012593 Jy/beam ! Combined flux in latest and established models = 0.252809 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 62 model components to the UV plane model. ! The established model now contains 81 components and 0.252809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147999Jy sigma=2.149940 ! Fit after self-cal, rms=0.147815Jy sigma=2.144127 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.67 at -10.7 degrees (North through East) ! Clean map min=-0.030011 max=0.11628 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.147815Jy sigma=2.144127 ! Fit after self-cal, rms=0.147815Jy sigma=2.144127 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147815Jy sigma=2.144127 ! Fit after self-cal, rms=0.147811Jy sigma=2.143985 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.67 mas, bpa=-10.7 degrees ! Estimated noise=0.994494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100391 Jy ! Component: 100 - total flux cleaned = 0.0134281 Jy ! Component: 150 - total flux cleaned = 0.0144234 Jy ! Component: 200 - total flux cleaned = 0.0148553 Jy ! Total flux subtracted in 200 components = 0.0148553 Jy ! Clean residual min=-0.029589 max=0.053646 Jy/beam ! Clean residual mean=0.000318 rms=0.012403 Jy/beam ! Combined flux in latest and established models = 0.267664 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.267664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146376Jy sigma=2.133726 ! Fit after self-cal, rms=0.146316Jy sigma=2.131214 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146316Jy sigma=2.131214 ! Fit after self-cal, rms=0.144493Jy sigma=2.095098 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355534 Jy ! Component: 100 - total flux cleaned = 0.00425995 Jy ! Component: 150 - total flux cleaned = 0.00473888 Jy ! Component: 200 - total flux cleaned = 0.0051828 Jy ! Total flux subtracted in 200 components = 0.0051828 Jy ! Clean residual min=-0.029011 max=0.052939 Jy/beam ! Clean residual mean=0.000327 rms=0.012220 Jy/beam ! Combined flux in latest and established models = 0.272847 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 99 components and 0.272847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143847Jy sigma=2.088827 ! Fit after self-cal, rms=0.143764Jy sigma=2.086267 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.67 at -10.7 degrees (North through East) ! Clean map min=-0.029061 max=0.11405 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143764Jy sigma=2.086267 ! Fit after self-cal, rms=0.143764Jy sigma=2.086267 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143764Jy sigma=2.086267 ! Fit after self-cal, rms=0.143766Jy sigma=2.086133 ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.67 mas, bpa=-10.7 degrees ! Estimated noise=0.994494 mJy/beam. ! Added new window around map position (-17, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607401 Jy ! Component: 100 - total flux cleaned = 0.0868011 Jy ! Component: 150 - total flux cleaned = 0.0980177 Jy ! Component: 200 - total flux cleaned = 0.1065 Jy ! Total flux subtracted in 200 components = 0.1065 Jy ! Clean residual min=-0.024902 max=0.033429 Jy/beam ! Clean residual mean=0.000163 rms=0.009192 Jy/beam ! Combined flux in latest and established models = 0.379347 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 138 components and 0.379347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118445Jy sigma=1.713855 ! Fit after self-cal, rms=0.115317Jy sigma=1.648564 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115317Jy sigma=1.648564 ! Fit after self-cal, rms=0.115317Jy sigma=1.648564 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115317Jy sigma=1.648564 ! Fit after self-cal, rms=0.115302Jy sigma=1.648298 ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.67 mas, bpa=-10.7 degrees ! Estimated noise=0.994494 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233845 Jy ! Component: 100 - total flux cleaned = 0.0380915 Jy ! Component: 150 - total flux cleaned = 0.0458374 Jy ! Component: 200 - total flux cleaned = 0.0501467 Jy ! Total flux subtracted in 200 components = 0.0501467 Jy ! Clean residual min=-0.022672 max=0.026818 Jy/beam ! Clean residual mean=0.000114 rms=0.007896 Jy/beam ! Combined flux in latest and established models = 0.429493 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 62 model components to the UV plane model. ! The established model now contains 186 components and 0.429494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108269Jy sigma=1.561842 ! Fit after self-cal, rms=0.107367Jy sigma=1.546759 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=13.12 mas, bpa=-9.782 degrees ! Estimated noise=1.19675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272008 Jy ! Component: 100 - total flux cleaned = 0.043133 Jy ! Component: 150 - total flux cleaned = 0.0474559 Jy ! Component: 200 - total flux cleaned = 0.050188 Jy ! Total flux subtracted in 200 components = 0.050188 Jy ! Clean residual min=-0.031711 max=0.036056 Jy/beam ! Clean residual mean=0.000183 rms=0.011708 Jy/beam ! Combined flux in latest and established models = 0.479682 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 212 components and 0.479682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102232Jy sigma=1.502371 ! Fit after self-cal, rms=0.101502Jy sigma=1.492677 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=10.75 mas, bpa=-8.132 degrees ! Estimated noise=1.69995 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0965804 Jy ! Component: 100 - total flux cleaned = 0.151124 Jy ! Component: 150 - total flux cleaned = 0.190591 Jy ! Component: 200 - total flux cleaned = 0.221103 Jy ! Total flux subtracted in 200 components = 0.221103 Jy ! Clean residual min=-0.017181 max=0.024105 Jy/beam ! Clean residual mean=0.000206 rms=0.005801 Jy/beam ! Combined flux in latest and established models = 0.221103 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.221103 Jy ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.67 mas, bpa=-10.7 degrees ! Estimated noise=0.994494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527259 Jy ! Component: 100 - total flux cleaned = 0.0915511 Jy ! Component: 150 - total flux cleaned = 0.122142 Jy ! Component: 200 - total flux cleaned = 0.147268 Jy ! Total flux subtracted in 200 components = 0.147268 Jy ! Clean residual min=-0.021938 max=0.026641 Jy/beam ! Clean residual mean=-0.000005 rms=0.008749 Jy/beam ! Combined flux in latest and established models = 0.368371 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 115 components and 0.368371 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=13.12 mas, bpa=-9.782 degrees ! Estimated noise=1.19675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414715 Jy ! Component: 100 - total flux cleaned = 0.07181 Jy ! Component: 150 - total flux cleaned = 0.0871086 Jy ! Component: 200 - total flux cleaned = 0.0990683 Jy ! Total flux subtracted in 200 components = 0.0990683 Jy ! Clean residual min=-0.029746 max=0.038195 Jy/beam ! Clean residual mean=0.000045 rms=0.011911 Jy/beam ! Combined flux in latest and established models = 0.467439 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 150 components and 0.467439 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.67 mas, bpa=-10.7 degrees ! Estimated noise=0.994494 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000877321 Jy ! Component: 100 - total flux cleaned = 0.000938548 Jy ! Component: 150 - total flux cleaned = 0.00326089 Jy ! Component: 200 - total flux cleaned = 0.00534589 Jy ! Total flux subtracted in 200 components = 0.00534589 Jy ! Clean residual min=-0.020407 max=0.026147 Jy/beam ! Clean residual mean=0.000044 rms=0.006980 Jy/beam ! Combined flux in latest and established models = 0.472785 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 185 components and 0.472785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100898Jy sigma=1.473077 ! Fit after self-cal, rms=0.100378Jy sigma=1.465106 wmodel J0117+8928_S_2006_02_16_yyk\_map.mod ! Writing 185 model components to file: J0117+8928_S_2006_02_16_yyk_map.mod wobs J0117+8928_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0117+8928_S_2006_02_16_yyk_uvs.fits wwins J0117+8928_S_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J0117+8928_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906108 Jy ! Component: 100 - total flux cleaned = 0.0130528 Jy ! Component: 150 - total flux cleaned = 0.0140416 Jy ! Component: 200 - total flux cleaned = 0.0155606 Jy ! Component: 250 - total flux cleaned = 0.0166966 Jy ! Component: 300 - total flux cleaned = 0.0175087 Jy ! Component: 350 - total flux cleaned = 0.0177684 Jy ! Component: 400 - total flux cleaned = 0.0180176 Jy ! Component: 450 - total flux cleaned = 0.0180158 Jy ! Component: 500 - total flux cleaned = 0.0186766 Jy ! Component: 550 - total flux cleaned = 0.0195191 Jy ! Component: 600 - total flux cleaned = 0.0207343 Jy ! Component: 650 - total flux cleaned = 0.0219037 Jy ! Component: 700 - total flux cleaned = 0.0230355 Jy ! Component: 750 - total flux cleaned = 0.0244943 Jy ! Component: 800 - total flux cleaned = 0.0262609 Jy ! Component: 850 - total flux cleaned = 0.0279713 Jy ! Component: 900 - total flux cleaned = 0.0288001 Jy ! Component: 950 - total flux cleaned = 0.029766 Jy ! Component: 1000 - total flux cleaned = 0.0302401 Jy ! Component: 1050 - total flux cleaned = 0.0314625 Jy ! Component: 1100 - total flux cleaned = 0.0325028 Jy ! Component: 1150 - total flux cleaned = 0.0338009 Jy ! Component: 1200 - total flux cleaned = 0.0346434 Jy ! Component: 1250 - total flux cleaned = 0.0356021 Jy ! Component: 1300 - total flux cleaned = 0.0359998 Jy ! Component: 1350 - total flux cleaned = 0.0369145 Jy ! Component: 1400 - total flux cleaned = 0.0374256 Jy ! Component: 1450 - total flux cleaned = 0.038175 Jy ! Component: 1500 - total flux cleaned = 0.0390263 Jy ! Component: 1550 - total flux cleaned = 0.0397365 Jy ! Component: 1600 - total flux cleaned = 0.0403156 Jy ! Component: 1650 - total flux cleaned = 0.0408804 Jy ! Component: 1700 - total flux cleaned = 0.0415445 Jy ! Component: 1750 - total flux cleaned = 0.0423006 Jy ! Component: 1800 - total flux cleaned = 0.0428285 Jy ! Component: 1850 - total flux cleaned = 0.0434497 Jy ! Component: 1900 - total flux cleaned = 0.0439565 Jy ! Component: 1950 - total flux cleaned = 0.044551 Jy ! Component: 2000 - total flux cleaned = 0.045039 Jy ! Total flux subtracted in 2048 components = 0.0457064 Jy ! Clean residual min=-0.004814 max=0.005672 Jy/beam ! Clean residual mean=0.000103 rms=0.002265 Jy/beam ! Combined flux in latest and established models = 0.518492 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 405 components and 0.518492 Jy ![Exited script file: muppet] wmap "J0117+8928_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.67 at -10.7 degrees (North through East) ! Clean map min=-0.018478 max=0.11585 Jy/beam ! Writing clean map to FITS file: J0117+8928_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115847 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00222727 device "J0117+8928_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0117+8928_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.76779 5.76779 11.5356 23.0711 46.1423 92.2846 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0066 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.622 x 11.67 at -10.7 degrees (North through East) ! Clean map min=-0.018478 max=0.11585 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0117+8928_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0117+8928_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0117+8928_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:02:34 2006