! Started logfile: J0102+5824_X_2006_02_14_yyk_uvs.log on Wed Jul 5 11:01:05 2006 obs J0102+5824_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0102+5824_X_2006_02_14_yyk_uva.fits ! AN table 1: 225 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.863506 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2301 lines of history. ! ! Reading 34972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0102+5824_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.56166 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7217 mas, bmaj=2.66 mas, bpa=33.21 degrees ! Estimated noise=2.19126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.19511 Jy ! Component: 100 - total flux cleaned = 2.50524 Jy ! Total flux subtracted in 100 components = 2.50524 Jy ! Clean residual min=-0.060107 max=0.081714 Jy/beam ! Clean residual mean=0.000378 rms=0.016456 Jy/beam ! Combined flux in latest and established models = 2.50524 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.50524 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.264312Jy sigma=4.253106 ! Fit after self-cal, rms=0.261355Jy sigma=4.218660 ! Inverting map and beam ! Estimated beam: bmin=0.7217 mas, bmaj=2.66 mas, bpa=33.21 degrees ! Estimated noise=2.19126 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9074 mas, bmaj=2.657 mas, bpa=31.8 degrees ! Estimated noise=1.48635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111293 Jy ! Component: 100 - total flux cleaned = 0.159528 Jy ! Component: 150 - total flux cleaned = 0.186258 Jy ! Component: 200 - total flux cleaned = 0.201629 Jy ! Total flux subtracted in 200 components = 0.201629 Jy ! Clean residual min=-0.051381 max=0.051662 Jy/beam ! Clean residual mean=0.000744 rms=0.013044 Jy/beam ! Combined flux in latest and established models = 2.70687 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 2.70687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226908Jy sigma=3.574381 ! Fit after self-cal, rms=0.226649Jy sigma=3.570545 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9074 x 2.657 at 31.8 degrees (North through East) ! Clean map min=-0.048421 max=2.5468 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.992119 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.06 KP 0.99 ! LA 1.01 MK 1.01 NL 1.01 OV 0.99 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01011 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.05 KP 0.92 ! LA 0.96 MK 0.98 NL 0.99 OV 0.98 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.01171 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.94 KP 0.85 ! LA 0.97 MK 1.02 NL 0.97 OV 0.98 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.992461 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 0.97 KP 0.88 ! LA 0.96 MK 1.04 NL 0.97 OV 1.03 ! PT 1.13 SC 1.01 ! ! ! Fit before self-cal, rms=0.226649Jy sigma=3.570545 ! Fit after self-cal, rms=0.143775Jy sigma=2.030043 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143775Jy sigma=2.030043 ! Fit after self-cal, rms=0.143775Jy sigma=2.030009 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9121 mas, bmaj=2.665 mas, bpa=31.77 degrees ! Estimated noise=1.48655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332408 Jy ! Component: 100 - total flux cleaned = 0.00281954 Jy ! Component: 150 - total flux cleaned = 0.00249187 Jy ! Component: 200 - total flux cleaned = 0.00235053 Jy ! Total flux subtracted in 200 components = 0.00235053 Jy ! Clean residual min=-0.007028 max=0.007350 Jy/beam ! Clean residual mean=0.000026 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 2.70922 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 2.70922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143158Jy sigma=2.016309 ! Fit after self-cal, rms=0.142981Jy sigma=2.015382 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142981Jy sigma=2.015382 ! Fit after self-cal, rms=0.093205Jy sigma=1.312511 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749635 Jy ! Component: 100 - total flux cleaned = 0.00089359 Jy ! Component: 150 - total flux cleaned = 0.00068325 Jy ! Component: 200 - total flux cleaned = 0.000425856 Jy ! Total flux subtracted in 200 components = 0.000425856 Jy ! Clean residual min=-0.006645 max=0.007309 Jy/beam ! Clean residual mean=0.000025 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 2.70965 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 2.70965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092879Jy sigma=1.306633 ! Fit after self-cal, rms=0.088547Jy sigma=1.250835 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9121 x 2.665 at 31.77 degrees (North through East) ! Clean map min=-0.0064865 max=2.5542 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088547Jy sigma=1.250835 ! Fit after self-cal, rms=0.074046Jy sigma=0.931987 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074046Jy sigma=0.931987 ! Fit after self-cal, rms=0.073523Jy sigma=0.924851 ! Inverting map and beam ! Estimated beam: bmin=0.9127 mas, bmaj=2.664 mas, bpa=31.77 degrees ! Estimated noise=1.48607 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00262824 Jy ! Component: 100 - total flux cleaned = -0.00298457 Jy ! Component: 150 - total flux cleaned = -0.00317335 Jy ! Component: 200 - total flux cleaned = -0.00325462 Jy ! Total flux subtracted in 200 components = -0.00325462 Jy ! Clean residual min=-0.006646 max=0.006740 Jy/beam ! Clean residual mean=0.000021 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 2.7064 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 2.70639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073255Jy sigma=0.918856 ! Fit after self-cal, rms=0.073126Jy sigma=0.917018 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073126Jy sigma=0.917018 ! Fit after self-cal, rms=0.072246Jy sigma=0.896951 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072246Jy sigma=0.896951 ! Fit after self-cal, rms=0.072237Jy sigma=0.896761 ! Inverting map and beam ! Estimated beam: bmin=0.9131 mas, bmaj=2.665 mas, bpa=31.77 degrees ! Estimated noise=1.48578 mJy/beam. ! Added new window around map position (-7.2, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524238 Jy ! Component: 100 - total flux cleaned = 0.00556593 Jy ! Component: 150 - total flux cleaned = 0.00556427 Jy ! Component: 200 - total flux cleaned = 0.00567972 Jy ! Total flux subtracted in 200 components = 0.00567972 Jy ! Clean residual min=-0.005544 max=0.004548 Jy/beam ! Clean residual mean=0.000044 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 2.71207 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 98 components and 2.71207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071816Jy sigma=0.881207 ! Fit after self-cal, rms=0.071831Jy sigma=0.880896 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.077 mas, bmaj=3.042 mas, bpa=28.1 degrees ! Estimated noise=1.88071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170888 Jy ! Component: 100 - total flux cleaned = 0.00191206 Jy ! Component: 150 - total flux cleaned = 0.00161513 Jy ! Component: 200 - total flux cleaned = 0.00135682 Jy ! Total flux subtracted in 200 components = 0.00135682 Jy ! Clean residual min=-0.005535 max=0.004127 Jy/beam ! Clean residual mean=0.000098 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 2.71343 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 2.71343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071871Jy sigma=0.879364 ! Fit after self-cal, rms=0.071837Jy sigma=0.879009 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7246 mas, bmaj=2.662 mas, bpa=33.17 degrees ! Estimated noise=2.18446 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.19086 Jy ! Component: 100 - total flux cleaned = 2.49279 Jy ! Component: 150 - total flux cleaned = 2.58468 Jy ! Component: 200 - total flux cleaned = 2.63007 Jy ! Total flux subtracted in 200 components = 2.63007 Jy ! Clean residual min=-0.012517 max=0.016839 Jy/beam ! Clean residual mean=0.000062 rms=0.003739 Jy/beam ! Combined flux in latest and established models = 2.63007 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 2.63007 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9131 mas, bmaj=2.665 mas, bpa=31.77 degrees ! Estimated noise=1.48578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365391 Jy ! Component: 100 - total flux cleaned = 0.0555734 Jy ! Component: 150 - total flux cleaned = 0.0667908 Jy ! Component: 200 - total flux cleaned = 0.0739373 Jy ! Total flux subtracted in 200 components = 0.0739373 Jy ! Clean residual min=-0.006566 max=0.006352 Jy/beam ! Clean residual mean=0.000026 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 2.70401 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 2.70401 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.077 mas, bmaj=3.042 mas, bpa=28.1 degrees ! Estimated noise=1.88071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571215 Jy ! Component: 100 - total flux cleaned = 0.00850503 Jy ! Component: 150 - total flux cleaned = 0.00955416 Jy ! Component: 200 - total flux cleaned = 0.00999857 Jy ! Total flux subtracted in 200 components = 0.00999857 Jy ! Clean residual min=-0.006679 max=0.004159 Jy/beam ! Clean residual mean=0.000103 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 2.71401 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 2.71401 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9131 mas, bmaj=2.665 mas, bpa=31.77 degrees ! Estimated noise=1.48578 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671106 Jy ! Component: 100 - total flux cleaned = 0.00178125 Jy ! Component: 150 - total flux cleaned = 0.00254772 Jy ! Component: 200 - total flux cleaned = 0.00303525 Jy ! Total flux subtracted in 200 components = 0.00303525 Jy ! Clean residual min=-0.005222 max=0.004608 Jy/beam ! Clean residual mean=0.000058 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 2.71704 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 104 components and 2.71704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072081Jy sigma=0.882255 ! Fit after self-cal, rms=0.072041Jy sigma=0.881527 wmodel J0102+5824_X_2006_02_14_yyk\_map.mod ! Writing 104 model components to file: J0102+5824_X_2006_02_14_yyk_map.mod wobs J0102+5824_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0102+5824_X_2006_02_14_yyk_uvs.fits wwins J0102+5824_X_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0102+5824_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163663 Jy ! Component: 100 - total flux cleaned = -0.00229396 Jy ! Component: 150 - total flux cleaned = -0.0025981 Jy ! Component: 200 - total flux cleaned = -0.00301606 Jy ! Component: 250 - total flux cleaned = -0.00333919 Jy ! Component: 300 - total flux cleaned = -0.00327796 Jy ! Component: 350 - total flux cleaned = -0.0032196 Jy ! Component: 400 - total flux cleaned = -0.00310741 Jy ! Component: 450 - total flux cleaned = -0.00305345 Jy ! Component: 500 - total flux cleaned = -0.00315855 Jy ! Component: 550 - total flux cleaned = -0.00320936 Jy ! Component: 600 - total flux cleaned = -0.00306177 Jy ! Component: 650 - total flux cleaned = -0.00306268 Jy ! Component: 700 - total flux cleaned = -0.0029221 Jy ! Component: 750 - total flux cleaned = -0.00287756 Jy ! Component: 800 - total flux cleaned = -0.00296812 Jy ! Component: 850 - total flux cleaned = -0.00292473 Jy ! Component: 900 - total flux cleaned = -0.00296728 Jy ! Component: 950 - total flux cleaned = -0.00305222 Jy ! Component: 1000 - total flux cleaned = -0.00313541 Jy ! Component: 1050 - total flux cleaned = -0.00313568 Jy ! Component: 1100 - total flux cleaned = -0.0032147 Jy ! Component: 1150 - total flux cleaned = -0.00321479 Jy ! Component: 1200 - total flux cleaned = -0.00333037 Jy ! Component: 1250 - total flux cleaned = -0.00336866 Jy ! Component: 1300 - total flux cleaned = -0.003406 Jy ! Component: 1350 - total flux cleaned = -0.00340627 Jy ! Component: 1400 - total flux cleaned = -0.00336988 Jy ! Component: 1450 - total flux cleaned = -0.00329837 Jy ! Component: 1500 - total flux cleaned = -0.00326322 Jy ! Component: 1550 - total flux cleaned = -0.00315923 Jy ! Component: 1600 - total flux cleaned = -0.00315918 Jy ! Component: 1650 - total flux cleaned = -0.00315901 Jy ! Component: 1700 - total flux cleaned = -0.00312545 Jy ! Component: 1750 - total flux cleaned = -0.00302622 Jy ! Component: 1800 - total flux cleaned = -0.00296073 Jy ! Component: 1850 - total flux cleaned = -0.0028963 Jy ! Component: 1900 - total flux cleaned = -0.00286455 Jy ! Component: 1950 - total flux cleaned = -0.00273892 Jy ! Component: 2000 - total flux cleaned = -0.00277076 Jy ! Total flux subtracted in 2048 components = -0.00270818 Jy ! Clean residual min=-0.002166 max=0.001643 Jy/beam ! Clean residual mean=0.000018 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 2.71434 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 238 components and 2.71433 Jy ![Exited script file: muppet] wmap "J0102+5824_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9131 x 2.665 at 31.77 degrees (North through East) ! Clean map min=-0.0035854 max=2.5561 Jy/beam ! Writing clean map to FITS file: J0102+5824_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.55605 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000584407 device "J0102+5824_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0102+5824_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0685909 0.0685909 0.137182 0.274364 0.548727 1.09745 2.19491 4.38982 8.77964 17.5593 35.1186 70.2371 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.556 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9131 x 2.665 at 31.77 degrees (North through East) ! Clean map min=-0.0035854 max=2.5561 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0102+5824_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0102+5824_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0102+5824_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:01:34 2006