! Started logfile: J0102+5824_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:00:32 2006 obs J0102+5824_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0102+5824_S_2006_02_14_yyk_uva.fits ! AN table 1: 225 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.863506 visibilities/baseline/integration-bin. ! Found source: J0102+5824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 34972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0102+5824_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.26128 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=10.11 mas, bpa=33.98 degrees ! Estimated noise=1.87525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.02858 Jy ! Component: 100 - total flux cleaned = 1.26092 Jy ! Total flux subtracted in 100 components = 1.26092 Jy ! Clean residual min=-0.036344 max=0.066488 Jy/beam ! Clean residual mean=0.000145 rms=0.011618 Jy/beam ! Combined flux in latest and established models = 1.26092 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.26092 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.207255Jy sigma=3.324135 ! Fit after self-cal, rms=0.206502Jy sigma=3.314280 ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=10.11 mas, bpa=33.98 degrees ! Estimated noise=1.87525 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=9.883 mas, bpa=33.99 degrees ! Estimated noise=1.43494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840355 Jy ! Component: 100 - total flux cleaned = 0.112437 Jy ! Component: 150 - total flux cleaned = 0.125682 Jy ! Component: 200 - total flux cleaned = 0.131006 Jy ! Total flux subtracted in 200 components = 0.131006 Jy ! Clean residual min=-0.023093 max=0.024560 Jy/beam ! Clean residual mean=-0.000805 rms=0.006501 Jy/beam ! Combined flux in latest and established models = 1.39192 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 45 components and 1.39192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172888Jy sigma=2.849255 ! Fit after self-cal, rms=0.172757Jy sigma=2.848254 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.283 x 9.883 at 33.99 degrees (North through East) ! Clean map min=-0.022581 max=1.2182 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.993796 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.01 KP 0.96 ! LA 1.23 MK 0.92 NL 0.94 OV 0.98 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984971 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.02 KP 0.98 ! LA 1.18 MK 0.99 NL 0.96 OV 1.02 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.981608 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.02 KP 0.97 ! LA 0.93 MK 1.10 NL 1.05 OV 1.01 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.05904 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.96 KP 0.88 ! LA 0.78 MK 1.07 NL 0.95 OV 0.85 ! PT 0.93 SC 1.06 ! ! ! Fit before self-cal, rms=0.172757Jy sigma=2.848254 ! Fit after self-cal, rms=0.109823Jy sigma=1.819209 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109823Jy sigma=1.819209 ! Fit after self-cal, rms=0.109832Jy sigma=1.819151 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=9.881 mas, bpa=33.85 degrees ! Estimated noise=1.43495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047556 Jy ! Component: 100 - total flux cleaned = 0.00565323 Jy ! Component: 150 - total flux cleaned = 0.00649281 Jy ! Component: 200 - total flux cleaned = 0.00704637 Jy ! Total flux subtracted in 200 components = 0.00704637 Jy ! Clean residual min=-0.009898 max=0.009491 Jy/beam ! Clean residual mean=-0.000012 rms=0.002429 Jy/beam ! Combined flux in latest and established models = 1.39897 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 1.39897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109108Jy sigma=1.810798 ! Fit after self-cal, rms=0.109059Jy sigma=1.810440 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109059Jy sigma=1.810440 ! Fit after self-cal, rms=0.101143Jy sigma=1.696919 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491353 Jy ! Component: 100 - total flux cleaned = 0.000505977 Jy ! Component: 150 - total flux cleaned = 0.00072344 Jy ! Component: 200 - total flux cleaned = 0.000909763 Jy ! Total flux subtracted in 200 components = 0.000909763 Jy ! Clean residual min=-0.009688 max=0.009422 Jy/beam ! Clean residual mean=-0.000012 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 1.39988 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 1.39988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100938Jy sigma=1.695024 ! Fit after self-cal, rms=0.100358Jy sigma=1.687427 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 9.881 at 33.85 degrees (North through East) ! Clean map min=-0.0091193 max=1.2267 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100358Jy sigma=1.687427 ! Fit after self-cal, rms=0.061343Jy sigma=1.002080 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061343Jy sigma=1.002080 ! Fit after self-cal, rms=0.061263Jy sigma=1.001059 ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=9.86 mas, bpa=33.81 degrees ! Estimated noise=1.4317 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554356 Jy ! Component: 100 - total flux cleaned = 0.00108182 Jy ! Component: 150 - total flux cleaned = 0.00144091 Jy ! Component: 200 - total flux cleaned = 0.00168115 Jy ! Total flux subtracted in 200 components = 0.00168115 Jy ! Clean residual min=-0.005787 max=0.005861 Jy/beam ! Clean residual mean=0.000059 rms=0.001621 Jy/beam ! Combined flux in latest and established models = 1.40156 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 1.40156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061051Jy sigma=0.998041 ! Fit after self-cal, rms=0.061034Jy sigma=0.997829 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061034Jy sigma=0.997829 ! Fit after self-cal, rms=0.059974Jy sigma=0.975877 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059974Jy sigma=0.975877 ! Fit after self-cal, rms=0.059975Jy sigma=0.975850 ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=9.852 mas, bpa=33.79 degrees ! Estimated noise=1.4317 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000296071 Jy ! Component: 100 - total flux cleaned = -0.000125579 Jy ! Component: 150 - total flux cleaned = 2.33923e-05 Jy ! Component: 200 - total flux cleaned = 0.000153779 Jy ! Total flux subtracted in 200 components = 0.000153779 Jy ! Clean residual min=-0.005542 max=0.005885 Jy/beam ! Clean residual mean=0.000064 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 1.40171 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 1.40171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059874Jy sigma=0.974399 ! Fit after self-cal, rms=0.059873Jy sigma=0.974359 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.272 mas, bmaj=10.64 mas, bpa=34.63 degrees ! Estimated noise=1.77826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00069353 Jy ! Component: 100 - total flux cleaned = 0.000562408 Jy ! Component: 150 - total flux cleaned = 0.000480048 Jy ! Component: 200 - total flux cleaned = 0.000432314 Jy ! Total flux subtracted in 200 components = 0.000432314 Jy ! Clean residual min=-0.006013 max=0.007212 Jy/beam ! Clean residual mean=0.000136 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 1.40215 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 1.40215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059857Jy sigma=0.974457 ! Fit after self-cal, rms=0.059859Jy sigma=0.974345 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.613 mas, bmaj=10.09 mas, bpa=33.93 degrees ! Estimated noise=1.86767 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.02277 Jy ! Component: 100 - total flux cleaned = 1.24649 Jy ! Component: 150 - total flux cleaned = 1.32817 Jy ! Component: 200 - total flux cleaned = 1.36206 Jy ! Total flux subtracted in 200 components = 1.36206 Jy ! Clean residual min=-0.009536 max=0.011825 Jy/beam ! Clean residual mean=0.000093 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 1.36206 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.36206 Jy ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=9.852 mas, bpa=33.79 degrees ! Estimated noise=1.4317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202713 Jy ! Component: 100 - total flux cleaned = 0.0306518 Jy ! Component: 150 - total flux cleaned = 0.0351217 Jy ! Component: 200 - total flux cleaned = 0.0361506 Jy ! Total flux subtracted in 200 components = 0.0361506 Jy ! Clean residual min=-0.005820 max=0.005562 Jy/beam ! Clean residual mean=0.000063 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 1.39821 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 58 components and 1.39821 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.272 mas, bmaj=10.64 mas, bpa=34.63 degrees ! Estimated noise=1.77826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224894 Jy ! Component: 100 - total flux cleaned = 0.00225743 Jy ! Component: 150 - total flux cleaned = 0.00232046 Jy ! Component: 200 - total flux cleaned = 0.00237043 Jy ! Total flux subtracted in 200 components = 0.00237043 Jy ! Clean residual min=-0.006203 max=0.007040 Jy/beam ! Clean residual mean=0.000131 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 1.40058 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 1.40058 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=9.852 mas, bpa=33.79 degrees ! Estimated noise=1.4317 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.65065e-05 Jy ! Component: 100 - total flux cleaned = 0.000243968 Jy ! Component: 150 - total flux cleaned = 0.00041255 Jy ! Component: 200 - total flux cleaned = 0.00056583 Jy ! Total flux subtracted in 200 components = 0.00056583 Jy ! Clean residual min=-0.005559 max=0.005745 Jy/beam ! Clean residual mean=0.000062 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 1.40114 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 1.40114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060138Jy sigma=0.977926 ! Fit after self-cal, rms=0.060140Jy sigma=0.977820 wmodel J0102+5824_S_2006_02_14_yyk\_map.mod ! Writing 86 model components to file: J0102+5824_S_2006_02_14_yyk_map.mod wobs J0102+5824_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0102+5824_S_2006_02_14_yyk_uvs.fits wwins J0102+5824_S_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J0102+5824_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102609 Jy ! Component: 100 - total flux cleaned = 0.00120793 Jy ! Component: 150 - total flux cleaned = 0.00112056 Jy ! Component: 200 - total flux cleaned = 0.00104448 Jy ! Component: 250 - total flux cleaned = 0.00096944 Jy ! Component: 300 - total flux cleaned = 0.000827131 Jy ! Component: 350 - total flux cleaned = 0.000829251 Jy ! Component: 400 - total flux cleaned = 0.000831504 Jy ! Component: 450 - total flux cleaned = 0.00102254 Jy ! Component: 500 - total flux cleaned = 0.00120871 Jy ! Component: 550 - total flux cleaned = 0.00144871 Jy ! Component: 600 - total flux cleaned = 0.00162164 Jy ! Component: 650 - total flux cleaned = 0.00179033 Jy ! Component: 700 - total flux cleaned = 0.00195519 Jy ! Component: 750 - total flux cleaned = 0.00206229 Jy ! Component: 800 - total flux cleaned = 0.00237256 Jy ! Component: 850 - total flux cleaned = 0.00262399 Jy ! Component: 900 - total flux cleaned = 0.00296854 Jy ! Component: 950 - total flux cleaned = 0.00330548 Jy ! Component: 1000 - total flux cleaned = 0.00368103 Jy ! Component: 1050 - total flux cleaned = 0.00391066 Jy ! Component: 1100 - total flux cleaned = 0.00413483 Jy ! Component: 1150 - total flux cleaned = 0.00444275 Jy ! Component: 1200 - total flux cleaned = 0.00465894 Jy ! Component: 1250 - total flux cleaned = 0.00487143 Jy ! Component: 1300 - total flux cleaned = 0.0051213 Jy ! Component: 1350 - total flux cleaned = 0.0052846 Jy ! Component: 1400 - total flux cleaned = 0.00544544 Jy ! Component: 1450 - total flux cleaned = 0.00564275 Jy ! Component: 1500 - total flux cleaned = 0.00575907 Jy ! Component: 1550 - total flux cleaned = 0.00591122 Jy ! Component: 1600 - total flux cleaned = 0.00602363 Jy ! Component: 1650 - total flux cleaned = 0.0061713 Jy ! Component: 1700 - total flux cleaned = 0.00631651 Jy ! Component: 1750 - total flux cleaned = 0.00638811 Jy ! Component: 1800 - total flux cleaned = 0.00645885 Jy ! Component: 1850 - total flux cleaned = 0.00670049 Jy ! Component: 1900 - total flux cleaned = 0.00669957 Jy ! Component: 1950 - total flux cleaned = 0.0067326 Jy ! Component: 2000 - total flux cleaned = 0.00666693 Jy ! Total flux subtracted in 2048 components = 0.00666774 Jy ! Clean residual min=-0.001694 max=0.001953 Jy/beam ! Clean residual mean=0.000001 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 1.40781 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 248 components and 1.40781 Jy ![Exited script file: muppet] wmap "J0102+5824_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.34 x 9.852 at 33.79 degrees (North through East) ! Clean map min=-0.0042125 max=1.228 Jy/beam ! Writing clean map to FITS file: J0102+5824_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.22797 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000701677 device "J0102+5824_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0102+5824_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.171423 0.171423 0.342847 0.685693 1.37139 2.74277 5.48554 10.9711 21.9422 43.8844 87.7687 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.227 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.34 x 9.852 at 33.79 degrees (North through East) ! Clean map min=-0.0042125 max=1.228 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0102+5824_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0102+5824_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0102+5824_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:01:03 2006