! Started logfile: /d2/scr/pima/bp171a5_uvs/J1445-1614_C_uvs.log on Sun Jan 19 22:08:30 2014
obs /d2/scr/pima/bp171a5_uvs/J1445-1614_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a5_uvs/J1445-1614_C_uva.fits
! AN table 1: 7 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.730159 visibilities/baseline/integration-bin.
! Found source: J1445-1614
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1472 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a5_uvs/J1445-1614_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010678Jy  sigma=34.863458
! Fit after  self-cal, rms=0.834491Jy  sigma=29.020475
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.224 mas, bmaj=3.347 mas, bpa=-7.865 degrees
! Estimated noise=0.75318 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123905 Jy
! Component: 100  -  total flux cleaned = 0.153401 Jy
! Total flux subtracted in 100 components = 0.153401 Jy
! Clean residual min=-0.005613 max=0.011463 Jy/beam
! Clean residual mean=0.000002 rms=0.001436 Jy/beam
! Combined flux in latest and established models = 0.153401 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.153401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034061Jy  sigma=0.929262
! Fit after  self-cal, rms=0.034052Jy  sigma=0.929013
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117139 Jy
! Component: 100  -  total flux cleaned = 0.0173382 Jy
! Total flux subtracted in 100 components = 0.0173382 Jy
! Clean residual min=-0.003787 max=0.004325 Jy/beam
! Clean residual mean=0.000004 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.17074 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 0.17074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028674Jy  sigma=0.781823
! Fit after  self-cal, rms=0.028662Jy  sigma=0.781576
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.486 mas, bmaj=3.805 mas, bpa=-7.734 degrees
! Estimated noise=0.549024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274148 Jy
! Component: 100  -  total flux cleaned = 0.00364388 Jy
! Component: 150  -  total flux cleaned = 0.00367714 Jy
! Component: 200  -  total flux cleaned = 0.00367593 Jy
! Total flux subtracted in 200 components = 0.00367593 Jy
! Clean residual min=-0.003716 max=0.004970 Jy/beam
! Clean residual mean=0.000005 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.174415 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 30 components and 0.174415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028104Jy  sigma=0.782195
! Fit after  self-cal, rms=0.028101Jy  sigma=0.782101
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.486 x 3.805 at -7.734 degrees (North through East)
! Clean map  min=-0.003599  max=0.16231 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.95     KP        0.90     LA        1.05     
!   MK        1.03     NL        1.05     OV        0.98     PT        0.88     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        0.99     KP        0.93     LA        1.11     
!   MK        0.99     NL        1.09     OV        1.02     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.01     KP        0.99     LA        1.11     
!   MK        1.02     NL        1.03     OV        0.98     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.04     KP        1.01     LA        1.17     
!   MK        1.00     NL        1.02     OV        1.00     PT        1.03     
!   SC        1.06     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.98     KP        0.96     LA        1.05     
!   MK        1.00     NL        1.01     OV        0.99     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.02     KP        1.06     LA        1.05     
!   MK        1.00     NL        1.01     OV        0.99     PT        0.96     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.028101Jy  sigma=0.782101
! Fit after  self-cal, rms=0.026212Jy  sigma=0.679872
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.505 mas, bmaj=3.81 mas, bpa=-7.512 degrees
! Estimated noise=0.559603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247387 Jy
! Component: 100  -  total flux cleaned = 0.00346271 Jy
! Component: 150  -  total flux cleaned = 0.00394036 Jy
! Component: 200  -  total flux cleaned = 0.00416877 Jy
! Total flux subtracted in 200 components = 0.00416877 Jy
! Clean residual min=-0.002819 max=0.002791 Jy/beam
! Clean residual mean=0.000005 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.178584 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 35 components and 0.178584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025794Jy  sigma=0.677494
! Fit after  self-cal, rms=0.025793Jy  sigma=0.677430
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025793Jy  sigma=0.677430
! Fit after  self-cal, rms=0.025800Jy  sigma=0.670800
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.503 mas, bmaj=3.803 mas, bpa=-7.493 degrees
! Estimated noise=0.567139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186807 Jy
! Component: 100  -  total flux cleaned = 0.00262029 Jy
! Component: 150  -  total flux cleaned = 0.00301204 Jy
! Component: 200  -  total flux cleaned = 0.00315409 Jy
! Total flux subtracted in 200 components = 0.00315409 Jy
! Clean residual min=-0.002948 max=0.002773 Jy/beam
! Clean residual mean=0.000006 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.181738 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 40 components and 0.181738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025523Jy  sigma=0.670437
! Fit after  self-cal, rms=0.025523Jy  sigma=0.670425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.4288e-05 Jy
! Component: 100  -  total flux cleaned = 4.43609e-05 Jy
! Component: 150  -  total flux cleaned = 3.74023e-05 Jy
! Component: 200  -  total flux cleaned = 3.13992e-05 Jy
! Total flux subtracted in 200 components = 3.13992e-05 Jy
! Clean residual min=-0.002942 max=0.002771 Jy/beam
! Clean residual mean=0.000006 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.18177 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.18177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025516Jy  sigma=0.670397
! Fit after  self-cal, rms=0.025516Jy  sigma=0.670392
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025516Jy  sigma=0.670392
! Fit after  self-cal, rms=0.025546Jy  sigma=0.666609
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.5 mas, bmaj=3.798 mas, bpa=-7.477 degrees
! Estimated noise=0.572771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014354 Jy
! Component: 100  -  total flux cleaned = 0.00201755 Jy
! Component: 150  -  total flux cleaned = 0.00232702 Jy
! Component: 200  -  total flux cleaned = 0.00240161 Jy
! Total flux subtracted in 200 components = 0.00240161 Jy
! Clean residual min=-0.003059 max=0.002756 Jy/beam
! Clean residual mean=0.000006 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.184171 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 48 components and 0.184171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025357Jy  sigma=0.667151
! Fit after  self-cal, rms=0.025357Jy  sigma=0.667145
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.27593e-05 Jy
! Component: 100  -  total flux cleaned = 3.26122e-05 Jy
! Component: 150  -  total flux cleaned = 2.67896e-05 Jy
! Component: 200  -  total flux cleaned = 2.02388e-05 Jy
! Total flux subtracted in 200 components = 2.02388e-05 Jy
! Clean residual min=-0.003055 max=0.002756 Jy/beam
! Clean residual mean=0.000006 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.184192 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 50 components and 0.184192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025351Jy  sigma=0.667109
! Fit after  self-cal, rms=0.025351Jy  sigma=0.667106
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025351Jy  sigma=0.667106
! Fit after  self-cal, rms=0.025390Jy  sigma=0.664973
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=6.969 mas, bpa=-6.036 degrees
! Estimated noise=0.769759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000866273 Jy
! Component: 100  -  total flux cleaned = 0.000931047 Jy
! Component: 150  -  total flux cleaned = 0.000980805 Jy
! Component: 200  -  total flux cleaned = 0.000961294 Jy
! Total flux subtracted in 200 components = 0.000961294 Jy
! Clean residual min=-0.004103 max=0.003433 Jy/beam
! Clean residual mean=0.000011 rms=0.001058 Jy/beam
! Combined flux in latest and established models = 0.185153 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 51 components and 0.185153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025358Jy  sigma=0.666979
! Fit after  self-cal, rms=0.025346Jy  sigma=0.666685
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172658 Jy
! Component: 100  -  total flux cleaned = -0.000136816 Jy
! Component: 150  -  total flux cleaned = -0.000122486 Jy
! Component: 200  -  total flux cleaned = -0.000147054 Jy
! Total flux subtracted in 200 components = -0.000147054 Jy
! Clean residual min=-0.004077 max=0.003439 Jy/beam
! Clean residual mean=0.000011 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.185006 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 53 components and 0.185006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025377Jy  sigma=0.668914
! Fit after  self-cal, rms=0.025368Jy  sigma=0.668711
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.499 mas, bmaj=3.793 mas, bpa=-7.464 degrees
! Estimated noise=0.577018 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.499 x 3.793 at -7.464 degrees (North through East)
! Clean map  min=-0.0029947  max=0.1701 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.23 mas, bmaj=3.333 mas, bpa=-7.884 degrees
! Estimated noise=0.777321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129426 Jy
! Component: 100  -  total flux cleaned = 0.160618 Jy
! Component: 150  -  total flux cleaned = 0.173215 Jy
! Component: 200  -  total flux cleaned = 0.179326 Jy
! Total flux subtracted in 200 components = 0.179326 Jy
! Clean residual min=-0.002776 max=0.003211 Jy/beam
! Clean residual mean=0.000003 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.179326 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.179326 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.499 mas, bmaj=3.793 mas, bpa=-7.464 degrees
! Estimated noise=0.577018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372129 Jy
! Component: 100  -  total flux cleaned = 0.00548396 Jy
! Component: 150  -  total flux cleaned = 0.00604967 Jy
! Component: 200  -  total flux cleaned = 0.00621755 Jy
! Total flux subtracted in 200 components = 0.00621755 Jy
! Clean residual min=-0.003253 max=0.002803 Jy/beam
! Clean residual mean=0.000006 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.185544 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.185544 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=6.969 mas, bpa=-6.036 degrees
! Estimated noise=0.769759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000507463 Jy
! Component: 100  -  total flux cleaned = -0.000473173 Jy
! Component: 150  -  total flux cleaned = -0.000421955 Jy
! Component: 200  -  total flux cleaned = -0.000441975 Jy
! Total flux subtracted in 200 components = -0.000441975 Jy
! Clean residual min=-0.004151 max=0.003446 Jy/beam
! Clean residual mean=0.000011 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.185102 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.67913e-05 Jy
! Component: 100  -  total flux cleaned = -5.38094e-05 Jy
! Component: 150  -  total flux cleaned = -8.5222e-05 Jy
! Component: 200  -  total flux cleaned = -9.95905e-05 Jy
! Total flux subtracted in 200 components = -9.95905e-05 Jy
! Clean residual min=-0.004109 max=0.003440 Jy/beam
! Clean residual mean=0.000011 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.185002 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.185002 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.499 mas, bmaj=3.793 mas, bpa=-7.464 degrees
! Estimated noise=0.577018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000650461 Jy
! Component: 100  -  total flux cleaned = 0.000652328 Jy
! Component: 150  -  total flux cleaned = 0.000679956 Jy
! Component: 200  -  total flux cleaned = 0.00071779 Jy
! Total flux subtracted in 200 components = 0.00071779 Jy
! Clean residual min=-0.003179 max=0.002748 Jy/beam
! Clean residual mean=0.000006 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.18572 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 53 components and 0.18572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025253Jy  sigma=0.666057
! Fit after  self-cal, rms=0.025254Jy  sigma=0.666002
wmodel /d2/scr/pima/bp171a5_uvs/J1445-1614_C_map.mod
! Writing 53 model components to file: /d2/scr/pima/bp171a5_uvs/J1445-1614_C_map.mod
wobs /d2/scr/pima/bp171a5_uvs/J1445-1614_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a5_uvs/J1445-1614_C_uvs.fits
wwins /d2/scr/pima/bp171a5_uvs/J1445-1614_C_map.win
! wwins: Wrote 1 windows to /d2/scr/pima/bp171a5_uvs/J1445-1614_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000937009 Jy
! Component: 100  -  total flux cleaned = -0.00121777 Jy
! Component: 150  -  total flux cleaned = -0.00117786 Jy
! Component: 200  -  total flux cleaned = -0.00106122 Jy
! Component: 250  -  total flux cleaned = -0.00109812 Jy
! Component: 300  -  total flux cleaned = -0.00116712 Jy
! Component: 350  -  total flux cleaned = -0.00113256 Jy
! Component: 400  -  total flux cleaned = -0.00110021 Jy
! Component: 450  -  total flux cleaned = -0.00107009 Jy
! Component: 500  -  total flux cleaned = -0.000979915 Jy
! Component: 550  -  total flux cleaned = -0.000863162 Jy
! Component: 600  -  total flux cleaned = -0.00069335 Jy
! Component: 650  -  total flux cleaned = -0.000582645 Jy
! Component: 700  -  total flux cleaned = -0.00044841 Jy
! Component: 750  -  total flux cleaned = -0.0003182 Jy
! Component: 800  -  total flux cleaned = -0.000191135 Jy
! Component: 850  -  total flux cleaned = -6.74547e-05 Jy
! Component: 900  -  total flux cleaned = 5.35786e-05 Jy
! Component: 950  -  total flux cleaned = 0.00017171 Jy
! Component: 1000  -  total flux cleaned = 0.000240794 Jy
! Component: 1050  -  total flux cleaned = 0.00026361 Jy
! Component: 1100  -  total flux cleaned = 0.000286019 Jy
! Component: 1150  -  total flux cleaned = 0.000307802 Jy
! Component: 1200  -  total flux cleaned = 0.000350422 Jy
! Component: 1250  -  total flux cleaned = 0.000330068 Jy
! Component: 1300  -  total flux cleaned = 0.000391894 Jy
! Component: 1350  -  total flux cleaned = 0.000351547 Jy
! Component: 1400  -  total flux cleaned = 0.000391372 Jy
! Component: 1450  -  total flux cleaned = 0.000352469 Jy
! Component: 1500  -  total flux cleaned = 0.00039075 Jy
! Component: 1550  -  total flux cleaned = 0.000333754 Jy
! Component: 1600  -  total flux cleaned = 0.000352342 Jy
! Component: 1650  -  total flux cleaned = 0.000315374 Jy
! Component: 1700  -  total flux cleaned = 0.000315163 Jy
! Component: 1750  -  total flux cleaned = 0.00027912 Jy
! Component: 1800  -  total flux cleaned = 0.000226359 Jy
! Component: 1850  -  total flux cleaned = 0.000261056 Jy
! Component: 1900  -  total flux cleaned = 0.000243896 Jy
! Component: 1950  -  total flux cleaned = 0.000311254 Jy
! Component: 2000  -  total flux cleaned = 0.000260897 Jy
! Component: 2050  -  total flux cleaned = 0.000310037 Jy
! Component: 2100  -  total flux cleaned = 0.000326383 Jy
! Component: 2150  -  total flux cleaned = 0.000358545 Jy
! Component: 2200  -  total flux cleaned = 0.000437788 Jy
! Component: 2250  -  total flux cleaned = 0.000469343 Jy
! Component: 2300  -  total flux cleaned = 0.000531595 Jy
! Component: 2350  -  total flux cleaned = 0.000608541 Jy
! Component: 2400  -  total flux cleaned = 0.000638801 Jy
! Component: 2450  -  total flux cleaned = 0.000699142 Jy
! Component: 2500  -  total flux cleaned = 0.000714026 Jy
! Component: 2550  -  total flux cleaned = 0.000787873 Jy
! Component: 2600  -  total flux cleaned = 0.000846528 Jy
! Component: 2650  -  total flux cleaned = 0.000919091 Jy
! Component: 2700  -  total flux cleaned = 0.000947857 Jy
! Component: 2750  -  total flux cleaned = 0.00104748 Jy
! Component: 2800  -  total flux cleaned = 0.00107546 Jy
! Component: 2850  -  total flux cleaned = 0.00110348 Jy
! Component: 2900  -  total flux cleaned = 0.00114519 Jy
! Component: 2950  -  total flux cleaned = 0.00121397 Jy
! Component: 3000  -  total flux cleaned = 0.00121399 Jy
! Component: 3050  -  total flux cleaned = 0.00128145 Jy
! Component: 3100  -  total flux cleaned = 0.00128145 Jy
! Component: 3150  -  total flux cleaned = 0.00133476 Jy
! Component: 3200  -  total flux cleaned = 0.00130843 Jy
! Component: 3250  -  total flux cleaned = 0.0013477 Jy
! Component: 3300  -  total flux cleaned = 0.00132173 Jy
! Component: 3350  -  total flux cleaned = 0.00133476 Jy
! Component: 3400  -  total flux cleaned = 0.00137318 Jy
! Component: 3450  -  total flux cleaned = 0.00141126 Jy
! Component: 3500  -  total flux cleaned = 0.00134816 Jy
! Component: 3550  -  total flux cleaned = 0.0013609 Jy
! Component: 3600  -  total flux cleaned = 0.00137345 Jy
! Component: 3650  -  total flux cleaned = 0.00137352 Jy
! Component: 3700  -  total flux cleaned = 0.00141035 Jy
! Component: 3750  -  total flux cleaned = 0.00141032 Jy
! Component: 3800  -  total flux cleaned = 0.00141035 Jy
! Component: 3850  -  total flux cleaned = 0.00143449 Jy
! Component: 3900  -  total flux cleaned = 0.00147047 Jy
! Component: 3950  -  total flux cleaned = 0.0014586 Jy
! Component: 4000  -  total flux cleaned = 0.00148218 Jy
! Component: 4050  -  total flux cleaned = 0.00145858 Jy
! Total flux subtracted in 4096 components = 0.00148189 Jy
! Clean residual min=-0.000684 max=0.000608 Jy/beam
! Clean residual mean=0.000000 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.187202 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 348 components and 0.187202 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/d2/scr/pima/bp171a5_uvs/J1445-1614_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.499 x 3.793 at -7.464 degrees (North through East)
! Clean map  min=-0.0018357  max=0.16992 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a5_uvs/J1445-1614_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.169921 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208731 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.368519 0.368519 0.737038 1.47408 2.94815 5.89631 11.7926 23.5852 47.1705 94.3409
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.169 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  814.068 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a5_uvs/J1445-1614_C_uvs.log closed on Sun Jan 19 22:08:36 2014