! Started logfile: /d2/scr/pima/bp171a5_uvs/J1041-4422_C_uvs.log on Sun Jan 19 22:02:15 2014
obs /d2/scr/pima/bp171a5_uvs/J1041-4422_C_uva.fits
! Reading UV FITS file: /d2/scr/pima/bp171a5_uvs/J1041-4422_C_uva.fits
! AN table 1: 3 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1041-4422
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 216 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.3 
print "taper_size =",taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /d2/scr/pima/bp171a5_uvs/J1041-4422_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=1.006493Jy  sigma=24.303054
! Fit after  self-cal, rms=0.916093Jy  sigma=22.167496
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.665 mas, bmaj=83.25 mas, bpa=20.31 degrees
! Estimated noise=2.62867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0650523 Jy
! Component: 100  -  total flux cleaned = 0.0793686 Jy
! Total flux subtracted in 100 components = 0.0793686 Jy
! Clean residual min=-0.005388 max=0.005395 Jy/beam
! Clean residual mean=0.000146 rms=0.002302 Jy/beam
! Combined flux in latest and established models = 0.0793686 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0793686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025247Jy  sigma=0.565406
! Fit after  self-cal, rms=0.025227Jy  sigma=0.564578
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.474 mas, bmaj=85.29 mas, bpa=20.13 degrees
! Estimated noise=2.012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480438 Jy
! Component: 100  -  total flux cleaned = 0.00705111 Jy
! Component: 150  -  total flux cleaned = 0.00848152 Jy
! Component: 200  -  total flux cleaned = 0.00863033 Jy
! Total flux subtracted in 200 components = 0.00863033 Jy
! Clean residual min=-0.002132 max=0.002178 Jy/beam
! Clean residual mean=0.000044 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.0879989 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 81 components and 0.087999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022797Jy  sigma=0.512233
! Fit after  self-cal, rms=0.022734Jy  sigma=0.510820
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.474 x 85.29 at 20.13 degrees (North through East)
! Clean map  min=-0.0034759  max=0.079216 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        0.90     LA        1.14     OV        0.96     
!   PT        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        0.99     LA        1.01     OV        1.08     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.03     LA        0.97     OV        0.91     
!   PT        1.15     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        0.89     LA        0.99     OV        0.86     
!   PT        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        1.03     LA        1.10     OV        0.88     
!   PT        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        0.95     LA        0.97     OV        1.00     
!   PT        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     KP        1.12     LA        0.91     OV        1.10     
!   PT        0.91     
! 
! 
! Fit before self-cal, rms=0.022734Jy  sigma=0.510820
! Fit after  self-cal, rms=0.021332Jy  sigma=0.478051
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.425 mas, bmaj=85.44 mas, bpa=20.11 degrees
! Estimated noise=1.99476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00233121 Jy
! Component: 100  -  total flux cleaned = -0.00235377 Jy
! Component: 150  -  total flux cleaned = -0.00200064 Jy
! Component: 200  -  total flux cleaned = -0.0016218 Jy
! Total flux subtracted in 200 components = -0.0016218 Jy
! Clean residual min=-0.000648 max=0.000652 Jy/beam
! Clean residual mean=0.000026 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0863772 Jy
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 170 components and 0.0863772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020923Jy  sigma=0.469961
! Fit after  self-cal, rms=0.020927Jy  sigma=0.469585
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020927Jy  sigma=0.469585
! Fit after  self-cal, rms=0.020985Jy  sigma=0.468335
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.398 mas, bmaj=85.44 mas, bpa=20.11 degrees
! Estimated noise=2.00373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000142146 Jy
! Component: 100  -  total flux cleaned = 0.000144791 Jy
! Component: 150  -  total flux cleaned = 0.000388332 Jy
! Component: 200  -  total flux cleaned = 0.000575017 Jy
! Total flux subtracted in 200 components = 0.000575017 Jy
! Clean residual min=-0.000497 max=0.000501 Jy/beam
! Clean residual mean=0.000031 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0869522 Jy
selfcal
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 268 components and 0.0869522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020778Jy  sigma=0.465455
! Fit after  self-cal, rms=0.020773Jy  sigma=0.465362
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000284447 Jy
! Component: 100  -  total flux cleaned = 0.000366748 Jy
! Component: 150  -  total flux cleaned = 0.000519538 Jy
! Component: 200  -  total flux cleaned = 0.000715429 Jy
! Total flux subtracted in 200 components = 0.000715429 Jy
! Clean residual min=-0.000401 max=0.000401 Jy/beam
! Clean residual mean=0.000026 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0876676 Jy
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 354 components and 0.0876676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020699Jy  sigma=0.464048
! Fit after  self-cal, rms=0.020695Jy  sigma=0.464006
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020695Jy  sigma=0.464006
! Fit after  self-cal, rms=0.020741Jy  sigma=0.462524
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.37 mas, bmaj=85.39 mas, bpa=20.13 degrees
! Estimated noise=2.0098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.24587e-05 Jy
! Component: 100  -  total flux cleaned = 7.78692e-05 Jy
! Component: 150  -  total flux cleaned = 4.619e-05 Jy
! Component: 200  -  total flux cleaned = 0.00017604 Jy
! Total flux subtracted in 200 components = 0.00017604 Jy
! Clean residual min=-0.000412 max=0.000412 Jy/beam
! Clean residual mean=0.000028 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0878436 Jy
selfcal
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 452 components and 0.0878436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020581Jy  sigma=0.460536
! Fit after  self-cal, rms=0.020578Jy  sigma=0.460504
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156697 Jy
! Component: 100  -  total flux cleaned = 0.000224606 Jy
! Component: 150  -  total flux cleaned = 0.000398384 Jy
! Component: 200  -  total flux cleaned = 0.000632925 Jy
! Total flux subtracted in 200 components = 0.000632925 Jy
! Clean residual min=-0.000354 max=0.000355 Jy/beam
! Clean residual mean=0.000024 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0884765 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 524 components and 0.0884765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020526Jy  sigma=0.459565
! Fit after  self-cal, rms=0.020524Jy  sigma=0.459540
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020524Jy  sigma=0.459540
! Fit after  self-cal, rms=0.020573Jy  sigma=0.458324
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.742 mas, bmaj=84.01 mas, bpa=20.14 degrees
! Estimated noise=2.02884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.91745e-05 Jy
! Component: 100  -  total flux cleaned = 0.000312655 Jy
! Component: 150  -  total flux cleaned = 0.000387469 Jy
! Component: 200  -  total flux cleaned = 0.000388159 Jy
! Total flux subtracted in 200 components = 0.000388159 Jy
! Clean residual min=-0.000402 max=0.000404 Jy/beam
! Clean residual mean=0.000031 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0888647 Jy
selfcal
! Performing phase self-cal
! Adding 94 model components to the UV plane model.
! The established model now contains 604 components and 0.0888647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020432Jy  sigma=0.456920
! Fit after  self-cal, rms=0.020432Jy  sigma=0.456880
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000379829 Jy
! Component: 100  -  total flux cleaned = 0.000516526 Jy
! Component: 150  -  total flux cleaned = 0.000667892 Jy
! Component: 200  -  total flux cleaned = 0.000856103 Jy
! Total flux subtracted in 200 components = 0.000856103 Jy
! Clean residual min=-0.000313 max=0.000312 Jy/beam
! Clean residual mean=0.000024 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.0897208 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 660 components and 0.0897208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020390Jy  sigma=0.456182
! Fit after  self-cal, rms=0.020389Jy  sigma=0.456171
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.342 mas, bmaj=85.34 mas, bpa=20.15 degrees
! Estimated noise=2.01447 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.342 x 85.34 at 20.15 degrees (North through East)
! Clean map  min=-0.0034778  max=0.078163 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.567 mas, bmaj=83.47 mas, bpa=20.31 degrees
! Estimated noise=2.61199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.064573 Jy
! Component: 100  -  total flux cleaned = 0.0773133 Jy
! Component: 150  -  total flux cleaned = 0.0795547 Jy
! Component: 200  -  total flux cleaned = 0.0802702 Jy
! Total flux subtracted in 200 components = 0.0802702 Jy
! Clean residual min=-0.002903 max=0.002922 Jy/beam
! Clean residual mean=0.000105 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.0802702 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 63 model components to the UV plane model.
! The established model now contains 63 components and 0.0802702 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.342 mas, bmaj=85.34 mas, bpa=20.15 degrees
! Estimated noise=2.01447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010868 Jy
! Component: 100  -  total flux cleaned = 0.00235929 Jy
! Component: 150  -  total flux cleaned = 0.00248311 Jy
! Component: 200  -  total flux cleaned = 0.00238516 Jy
! Total flux subtracted in 200 components = 0.00238516 Jy
! Clean residual min=-0.001653 max=0.001640 Jy/beam
! Clean residual mean=0.000043 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.0826554 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 131 components and 0.0826553 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.742 mas, bmaj=84.01 mas, bpa=20.14 degrees
! Estimated noise=2.02884 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000181665 Jy
! Component: 100  -  total flux cleaned = 0.000385 Jy
! Component: 150  -  total flux cleaned = 0.00103501 Jy
! Component: 200  -  total flux cleaned = 0.00142997 Jy
! Total flux subtracted in 200 components = 0.00142997 Jy
! Clean residual min=-0.000827 max=0.000819 Jy/beam
! Clean residual mean=0.000031 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0840853 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247477 Jy
! Component: 100  -  total flux cleaned = 0.000348963 Jy
! Component: 150  -  total flux cleaned = 0.000346607 Jy
! Component: 200  -  total flux cleaned = 0.000416553 Jy
! Total flux subtracted in 200 components = 0.000416553 Jy
! Clean residual min=-0.001211 max=0.001193 Jy/beam
! Clean residual mean=0.000022 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0845019 Jy
! Adding 103 model components to the UV plane model.
! The established model now contains 232 components and 0.0845018 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.342 mas, bmaj=85.34 mas, bpa=20.15 degrees
! Estimated noise=2.01447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000833665 Jy
! Component: 100  -  total flux cleaned = 0.00103372 Jy
! Component: 150  -  total flux cleaned = 0.0012057 Jy
! Component: 200  -  total flux cleaned = 0.00139559 Jy
! Total flux subtracted in 200 components = 0.00139559 Jy
! Clean residual min=-0.000505 max=0.000511 Jy/beam
! Clean residual mean=0.000017 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0858974 Jy
selfcal
! Performing phase self-cal
! Adding 84 model components to the UV plane model.
! The established model now contains 316 components and 0.0858974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020527Jy  sigma=0.458922
! Fit after  self-cal, rms=0.020517Jy  sigma=0.458592
wmodel /d2/scr/pima/bp171a5_uvs/J1041-4422_C_map.mod
! Writing 316 model components to file: /d2/scr/pima/bp171a5_uvs/J1041-4422_C_map.mod
wobs /d2/scr/pima/bp171a5_uvs/J1041-4422_C_uvs.fits
! Writing UV FITS file: /d2/scr/pima/bp171a5_uvs/J1041-4422_C_uvs.fits
wwins /d2/scr/pima/bp171a5_uvs/J1041-4422_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/d2/scr/pima/bp171a5_uvs/J1041-4422_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.342 x 85.34 at 20.15 degrees (North through East)
! Clean map  min=-0.0058697  max=0.080336 Jy/beam
! Writing clean map to FITS file: /d2/scr/pima/bp171a5_uvs/J1041-4422_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0803358 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000228935 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.854918 0.854918 1.70984 3.41967 6.83934 13.6787 27.3574 54.7148
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.08 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  350.91 
quit
! Quitting program
! Log file /d2/scr/pima/bp171a5_uvs/J1041-4422_C_uvs.log closed on Sun Jan 19 22:02:28 2014