! Started logfile: /scr/pima/gb073_uvs/J2348+0624_X_uvs.log on Sat Dec 26 09:46:49 2015 obs /scr/pima/gb073_uvs/J2348+0624_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J2348+0624_X_uva.fits ! AN table 1: 40 integrations on 6 of 6 possible baselines. ! AN table 2: 39 integrations on 10 of 10 possible baselines. ! AN table 3: 17 integrations on 55 of 55 possible baselines. ! AN table 4: 20 integrations on 55 of 55 possible baselines. ! AN table 5: 7 integrations on 3 of 3 possible baselines. ! AN table 6: 17 integrations on 78 of 78 possible baselines. ! AN table 7: 15 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.778582 visibilities/baseline/integration-bin. ! Found source: J2348+0624 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 30128 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J2348+0624_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 41 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 41 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 41 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 41 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 5. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 57 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 51 telescope corrections were flagged in sub-array 6. ! A total of 39 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 6. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 57 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 51 telescope corrections were flagged in sub-array 6. ! A total of 39 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 7. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 41 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 8. ! A total of 88 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! A total of 27 telescope corrections were flagged in sub-array 3. ! A total of 41 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.017738Jy sigma=8.226469 ! Fit after self-cal, rms=0.859361Jy sigma=6.893923 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.4% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5103 mas, bmaj=1.053 mas, bpa=-5.92 degrees ! Estimated noise=1.07815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112714 Jy ! Component: 100 - total flux cleaned = 0.139843 Jy ! Total flux subtracted in 100 components = 0.139843 Jy ! Clean residual min=-0.005714 max=0.010929 Jy/beam ! Clean residual mean=-0.000003 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.139843 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.139843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.112767Jy sigma=0.727781 ! Fit after self-cal, rms=0.112711Jy sigma=0.727221 ! Inverting map ! Your choice of large map pixels excluded 10.4% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122461 Jy ! Component: 100 - total flux cleaned = 0.0192106 Jy ! Total flux subtracted in 100 components = 0.0192106 Jy ! Clean residual min=-0.005363 max=0.004716 Jy/beam ! Clean residual mean=-0.000002 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.159054 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.159054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.111481Jy sigma=0.710076 ! Fit after self-cal, rms=0.111485Jy sigma=0.709953 ! Inverting map ! Your choice of large map pixels excluded 10.4% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.4% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.6071 mas, bmaj=1.292 mas, bpa=-5.896 degrees ! Estimated noise=0.602403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468683 Jy ! Component: 100 - total flux cleaned = 0.00674482 Jy ! Component: 150 - total flux cleaned = 0.00773649 Jy ! Component: 200 - total flux cleaned = 0.00799459 Jy ! Total flux subtracted in 200 components = 0.00799459 Jy ! Clean residual min=-0.004805 max=0.004370 Jy/beam ! Clean residual mean=-0.000024 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.167048 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.167048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.111296Jy sigma=0.707610 ! Fit after self-cal, rms=0.111300Jy sigma=0.707595 ! Inverting map ! Your choice of large map pixels excluded 10.4% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6071 x 1.292 at -5.896 degrees (North through East) ! Clean map min=-0.0044763 max=0.14745 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.00 KP 0.95 LA 1.00 ! MC 0.86 MK 0.95 NL 0.90 ON 0.92 ! OV 0.99 PT 0.93 SC 0.94 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.94 EF 1.00* FD 0.98 KP 1.00 ! LA 1.02 MC 0.90 NL 0.94 ON 0.97 ! OV 0.98 PT 0.93 SC 0.96 ! ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.98 KP 1.03 LA 1.02 ! MC 1.02 MK 0.93 NL 0.93 ON 1.03 ! OV 1.01 PT 0.98 SC 0.99 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 EF 1.00* FD 1.00 KP 1.01 ! LA 0.98 MC 0.98 NL 0.96 ON 0.99 ! OV 1.04 PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.96 KP 0.93 LA 1.00 ! MC 0.91 MK 0.91 NL 0.89 ON 0.89 ! OV 0.94 PT 0.97 SC 1.04 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.05 EF 1.00* FD 0.98 KP 0.95 ! LA 0.96 MC 0.93 NL 0.90 ON 1.01 ! OV 0.97 PT 0.96 SC 1.09 ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 0.86 MC 0.87 ON 0.89 ! ZC 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.98 KP 0.95 LA 1.01 ! MC 1.04 MK 0.95 NL 0.94 ON 0.87 ! OV 0.96 PT 1.02 SC 1.03 ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 EF 1.00* FD 0.98 KP 1.00 ! LA 0.94 MC 0.93 NL 0.95 ON 0.95 ! OV 1.04 PT 1.06 SC 1.01 ! ! ! Correcting IF 5. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 6. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 EF 1.00* FD 1.01 KP 0.93 ! LA 1.08 MC 1.14 NL 1.02 ON 1.12 ! OV 0.98 PT 0.98 SC 1.11 ! ! ! Correcting IF 8. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 81 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.111300Jy sigma=0.707595 ! Fit after self-cal, rms=0.109236Jy sigma=0.710114 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5954 mas, bmaj=1.405 mas, bpa=-5.846 degrees ! Estimated noise=0.606351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244282 Jy ! Component: 100 - total flux cleaned = -0.00333535 Jy ! Component: 150 - total flux cleaned = -0.00365446 Jy ! Component: 200 - total flux cleaned = -0.00368095 Jy ! Total flux subtracted in 200 components = -0.00368095 Jy ! Clean residual min=-0.004974 max=0.004341 Jy/beam ! Clean residual mean=-0.000026 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.163367 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.163367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.109235Jy sigma=0.710239 ! Fit after self-cal, rms=0.109234Jy sigma=0.710217 ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.109234Jy sigma=0.710217 ! Fit after self-cal, rms=0.108866Jy sigma=0.710040 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5959 mas, bmaj=1.408 mas, bpa=-5.874 degrees ! Estimated noise=0.602565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010556 Jy ! Component: 100 - total flux cleaned = -0.00133827 Jy ! Component: 150 - total flux cleaned = -0.00135039 Jy ! Component: 200 - total flux cleaned = -0.00135012 Jy ! Total flux subtracted in 200 components = -0.00135012 Jy ! Clean residual min=-0.004816 max=0.004275 Jy/beam ! Clean residual mean=-0.000026 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.162017 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.162017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108862Jy sigma=0.710066 ! Fit after self-cal, rms=0.108862Jy sigma=0.710055 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014633 Jy ! Component: 100 - total flux cleaned = -0.000121067 Jy ! Component: 150 - total flux cleaned = -0.00010913 Jy ! Component: 200 - total flux cleaned = -9.74056e-05 Jy ! Total flux subtracted in 200 components = -9.74056e-05 Jy ! Clean residual min=-0.004801 max=0.004286 Jy/beam ! Clean residual mean=-0.000026 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.16192 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.16192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108861Jy sigma=0.710057 ! Fit after self-cal, rms=0.108861Jy sigma=0.710055 ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108861Jy sigma=0.710055 ! Fit after self-cal, rms=0.108725Jy sigma=0.710025 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5962 mas, bmaj=1.41 mas, bpa=-5.889 degrees ! Estimated noise=0.601071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000504801 Jy ! Component: 100 - total flux cleaned = -0.000495023 Jy ! Component: 150 - total flux cleaned = -0.00049514 Jy ! Component: 200 - total flux cleaned = -0.000484987 Jy ! Total flux subtracted in 200 components = -0.000484987 Jy ! Clean residual min=-0.004736 max=0.004248 Jy/beam ! Clean residual mean=-0.000025 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.161435 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.161435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108723Jy sigma=0.710034 ! Fit after self-cal, rms=0.108724Jy sigma=0.710030 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.27897e-05 Jy ! Component: 100 - total flux cleaned = -5.02486e-05 Jy ! Component: 150 - total flux cleaned = -2.96115e-05 Jy ! Component: 200 - total flux cleaned = -1.94707e-05 Jy ! Total flux subtracted in 200 components = -1.94707e-05 Jy ! Clean residual min=-0.004731 max=0.004251 Jy/beam ! Clean residual mean=-0.000025 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.161415 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.161416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108720Jy sigma=0.710016 ! Fit after self-cal, rms=0.108721Jy sigma=0.710014 ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108721Jy sigma=0.710014 ! Fit after self-cal, rms=0.108673Jy sigma=0.710009 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=2.749 mas, bmaj=3.422 mas, bpa=-14.89 degrees ! Estimated noise=0.742009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153392 Jy ! Component: 100 - total flux cleaned = -0.00180039 Jy ! Component: 150 - total flux cleaned = -0.00184043 Jy ! Component: 200 - total flux cleaned = -0.00187946 Jy ! Total flux subtracted in 200 components = -0.00187946 Jy ! Clean residual min=-0.007034 max=0.007089 Jy/beam ! Clean residual mean=-0.000058 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.159536 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.159536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108624Jy sigma=0.709580 ! Fit after self-cal, rms=0.108625Jy sigma=0.709566 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.58069e-05 Jy ! Component: 100 - total flux cleaned = -7.67676e-05 Jy ! Component: 150 - total flux cleaned = -9.49998e-05 Jy ! Component: 200 - total flux cleaned = -0.000130074 Jy ! Total flux subtracted in 200 components = -0.000130074 Jy ! Clean residual min=-0.007047 max=0.007088 Jy/beam ! Clean residual mean=-0.000058 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.159406 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.159406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108603Jy sigma=0.709339 ! Fit after self-cal, rms=0.108605Jy sigma=0.709334 ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5962 mas, bmaj=1.41 mas, bpa=-5.896 degrees ! Estimated noise=0.600538 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5962 x 1.41 at -5.896 degrees (North through East) ! Clean map min=-0.0041687 max=0.14577 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.4977 mas, bmaj=1.154 mas, bpa=-5.75 degrees ! Estimated noise=1.09703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109687 Jy ! Component: 100 - total flux cleaned = 0.136158 Jy ! Component: 150 - total flux cleaned = 0.14789 Jy ! Component: 200 - total flux cleaned = 0.154449 Jy ! Total flux subtracted in 200 components = 0.154449 Jy ! Clean residual min=-0.005265 max=0.005272 Jy/beam ! Clean residual mean=-0.000003 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.154449 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.154449 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5962 mas, bmaj=1.41 mas, bpa=-5.896 degrees ! Estimated noise=0.600538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429364 Jy ! Component: 100 - total flux cleaned = 0.00601513 Jy ! Component: 150 - total flux cleaned = 0.00644076 Jy ! Component: 200 - total flux cleaned = 0.00650047 Jy ! Total flux subtracted in 200 components = 0.00650047 Jy ! Clean residual min=-0.004682 max=0.004337 Jy/beam ! Clean residual mean=-0.000026 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.160949 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.160949 Jy ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=2.749 mas, bmaj=3.422 mas, bpa=-14.89 degrees ! Estimated noise=0.742009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119617 Jy ! Component: 100 - total flux cleaned = -0.00124351 Jy ! Component: 150 - total flux cleaned = -0.00126547 Jy ! Component: 200 - total flux cleaned = -0.00130903 Jy ! Total flux subtracted in 200 components = -0.00130903 Jy ! Clean residual min=-0.007045 max=0.007111 Jy/beam ! Clean residual mean=-0.000058 rms=0.001990 Jy/beam ! Combined flux in latest and established models = 0.15964 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.07754e-05 Jy ! Component: 100 - total flux cleaned = -6.07411e-05 Jy ! Component: 150 - total flux cleaned = -9.87522e-05 Jy ! Component: 200 - total flux cleaned = -0.00013577 Jy ! Total flux subtracted in 200 components = -0.00013577 Jy ! Clean residual min=-0.007052 max=0.007097 Jy/beam ! Clean residual mean=-0.000058 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.159504 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 23 components and 0.159504 Jy ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! Estimated beam: bmin=0.5962 mas, bmaj=1.41 mas, bpa=-5.896 degrees ! Estimated noise=0.600538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150007 Jy ! Component: 100 - total flux cleaned = 0.00150066 Jy ! Component: 150 - total flux cleaned = 0.00153076 Jy ! Component: 200 - total flux cleaned = 0.00155353 Jy ! Total flux subtracted in 200 components = 0.00155353 Jy ! Clean residual min=-0.004708 max=0.004345 Jy/beam ! Clean residual mean=-0.000025 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.161058 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.161058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.108697Jy sigma=0.710058 ! Fit after self-cal, rms=0.108698Jy sigma=0.710016 wmodel /scr/pima/gb073_uvs/J2348+0624_X_map.mod ! Writing 23 model components to file: /scr/pima/gb073_uvs/J2348+0624_X_map.mod wobs /scr/pima/gb073_uvs/J2348+0624_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J2348+0624_X_uvs.fits wwins /scr/pima/gb073_uvs/J2348+0624_X_map.win ! wwins: Wrote 1 windows to /scr/pima/gb073_uvs/J2348+0624_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107183 Jy ! Component: 100 - total flux cleaned = -0.000833904 Jy ! Component: 150 - total flux cleaned = -0.00053223 Jy ! Component: 200 - total flux cleaned = -0.000463009 Jy ! Component: 250 - total flux cleaned = -0.000532912 Jy ! Component: 300 - total flux cleaned = -0.000599952 Jy ! Component: 350 - total flux cleaned = -0.000665118 Jy ! Component: 400 - total flux cleaned = -0.000793486 Jy ! Component: 450 - total flux cleaned = -0.000730543 Jy ! Component: 500 - total flux cleaned = -0.00116693 Jy ! Component: 550 - total flux cleaned = -0.00122798 Jy ! Component: 600 - total flux cleaned = -0.0013489 Jy ! Component: 650 - total flux cleaned = -0.00158593 Jy ! Component: 700 - total flux cleaned = -0.00187555 Jy ! Component: 750 - total flux cleaned = -0.00198936 Jy ! Component: 800 - total flux cleaned = -0.00193386 Jy ! Component: 850 - total flux cleaned = -0.00215592 Jy ! Component: 900 - total flux cleaned = -0.00226463 Jy ! Component: 950 - total flux cleaned = -0.00242526 Jy ! Component: 1000 - total flux cleaned = -0.00247797 Jy ! Component: 1050 - total flux cleaned = -0.00253068 Jy ! Component: 1100 - total flux cleaned = -0.00253107 Jy ! Component: 1150 - total flux cleaned = -0.00258163 Jy ! Component: 1200 - total flux cleaned = -0.0024804 Jy ! Component: 1250 - total flux cleaned = -0.00233076 Jy ! Component: 1300 - total flux cleaned = -0.00218366 Jy ! Component: 1350 - total flux cleaned = -0.0022329 Jy ! Component: 1400 - total flux cleaned = -0.00228085 Jy ! Component: 1450 - total flux cleaned = -0.00213731 Jy ! Component: 1500 - total flux cleaned = -0.00204256 Jy ! Component: 1550 - total flux cleaned = -0.00208909 Jy ! Component: 1600 - total flux cleaned = -0.00185773 Jy ! Component: 1650 - total flux cleaned = -0.00203995 Jy ! Component: 1700 - total flux cleaned = -0.00181318 Jy ! Component: 1750 - total flux cleaned = -0.0018582 Jy ! Component: 1800 - total flux cleaned = -0.00172408 Jy ! Component: 1850 - total flux cleaned = -0.00176901 Jy ! Component: 1900 - total flux cleaned = -0.00181253 Jy ! Component: 1950 - total flux cleaned = -0.00185611 Jy ! Component: 2000 - total flux cleaned = -0.00181308 Jy ! Component: 2050 - total flux cleaned = -0.00181297 Jy ! Component: 2100 - total flux cleaned = -0.00189757 Jy ! Component: 2150 - total flux cleaned = -0.0018553 Jy ! Component: 2200 - total flux cleaned = -0.00177267 Jy ! Component: 2250 - total flux cleaned = -0.00185555 Jy ! Component: 2300 - total flux cleaned = -0.00206066 Jy ! Component: 2350 - total flux cleaned = -0.00206054 Jy ! Component: 2400 - total flux cleaned = -0.00222228 Jy ! Component: 2450 - total flux cleaned = -0.00206198 Jy ! Component: 2500 - total flux cleaned = -0.00226171 Jy ! Component: 2550 - total flux cleaned = -0.00230179 Jy ! Component: 2600 - total flux cleaned = -0.0023017 Jy ! Component: 2650 - total flux cleaned = -0.00253488 Jy ! Component: 2700 - total flux cleaned = -0.00249587 Jy ! Component: 2750 - total flux cleaned = -0.00257217 Jy ! Component: 2800 - total flux cleaned = -0.00268649 Jy ! Component: 2850 - total flux cleaned = -0.00257251 Jy ! Component: 2900 - total flux cleaned = -0.00272241 Jy ! Component: 2950 - total flux cleaned = -0.00272277 Jy ! Component: 3000 - total flux cleaned = -0.00283364 Jy ! Component: 3050 - total flux cleaned = -0.00268655 Jy ! Component: 3100 - total flux cleaned = -0.0028695 Jy ! Component: 3150 - total flux cleaned = -0.00294226 Jy ! Component: 3200 - total flux cleaned = -0.00301435 Jy ! Component: 3250 - total flux cleaned = -0.00322956 Jy ! Component: 3300 - total flux cleaned = -0.00308674 Jy ! Component: 3350 - total flux cleaned = -0.00322754 Jy ! Component: 3400 - total flux cleaned = -0.00326262 Jy ! Component: 3450 - total flux cleaned = -0.00333227 Jy ! Component: 3500 - total flux cleaned = -0.00333215 Jy ! Component: 3550 - total flux cleaned = -0.00340091 Jy ! Component: 3600 - total flux cleaned = -0.00343518 Jy ! Component: 3650 - total flux cleaned = -0.00350333 Jy ! Component: 3700 - total flux cleaned = -0.00367279 Jy ! Component: 3750 - total flux cleaned = -0.00363898 Jy ! Component: 3800 - total flux cleaned = -0.00384026 Jy ! Component: 3850 - total flux cleaned = -0.00387359 Jy ! Component: 3900 - total flux cleaned = -0.00407253 Jy ! Component: 3950 - total flux cleaned = -0.00413838 Jy ! Component: 4000 - total flux cleaned = -0.00407274 Jy ! Component: 4050 - total flux cleaned = -0.00413774 Jy ! Total flux subtracted in 4096 components = -0.00426703 Jy ! Clean residual min=-0.001822 max=0.001645 Jy/beam ! Clean residual mean=-0.000015 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.156791 Jy keep ! Adding 355 model components to the UV plane model. ! The established model now contains 378 components and 0.156791 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J2348+0624_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5962 x 1.41 at -5.896 degrees (North through East) ! Clean map min=-0.0030036 max=0.14462 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J2348+0624_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144618 invert ! Inverting map ! Your choice of large map pixels excluded 10.7% of the data. ! The x-axis pixel size should ideally be below 0.1647 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000571671 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18589 1.18589 2.37178 4.74356 9.48711 18.9742 37.9484 75.8969 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.144 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 252.974 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J2348+0624_X_uvs.log closed on Sat Dec 26 09:46:55 2015