! Started logfile: /scr/pima/gb073_uvs/J2342-0322_X_uvs.log on Sat Dec 26 09:46:42 2015 obs /scr/pima/gb073_uvs/J2342-0322_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J2342-0322_X_uva.fits ! AN table 1: 18 integrations on 6 of 6 possible baselines. ! AN table 2: 51 integrations on 10 of 10 possible baselines. ! AN table 3: 10 integrations on 6 of 6 possible baselines. ! AN table 4: 20 integrations on 45 of 45 possible baselines. ! AN table 5: 20 integrations on 36 of 36 possible baselines. ! AN table 6: 20 integrations on 55 of 55 possible baselines. ! AN table 7: 10 integrations on 21 of 21 possible baselines. ! AN table 8: 21 integrations on 66 of 66 possible baselines. ! AN table 9: 11 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.662957 visibilities/baseline/integration-bin. ! Found source: J2342-0322 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 28120 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J2342-0322_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 59 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 59 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 59 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 59 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 55 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 80 telescope corrections were flagged in sub-array 8. ! A total of 22 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 6. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 55 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 80 telescope corrections were flagged in sub-array 8. ! A total of 22 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 7. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 59 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 42 telescope corrections were flagged in sub-array 1. ! A total of 124 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 36 telescope corrections were flagged in sub-array 6. ! A total of 59 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.008634Jy sigma=9.179508 ! Fit after self-cal, rms=0.910988Jy sigma=8.309640 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.6834 mas, bmaj=0.9877 mas, bpa=12.97 degrees ! Estimated noise=1.02399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0695524 Jy ! Component: 100 - total flux cleaned = 0.0908076 Jy ! Total flux subtracted in 100 components = 0.0908076 Jy ! Clean residual min=-0.005843 max=0.011660 Jy/beam ! Clean residual mean=0.000016 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.0908076 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0908076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093528Jy sigma=0.697786 ! Fit after self-cal, rms=0.092857Jy sigma=0.693727 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Added new window around map position (6.4, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126089 Jy ! Component: 100 - total flux cleaned = 0.0207303 Jy ! Total flux subtracted in 100 components = 0.0207303 Jy ! Clean residual min=-0.004262 max=0.007013 Jy/beam ! Clean residual mean=0.000009 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.111538 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.111538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.090832Jy sigma=0.666918 ! Fit after self-cal, rms=0.090578Jy sigma=0.665689 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Added new window around map position (1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00751027 Jy ! Component: 100 - total flux cleaned = 0.0124176 Jy ! Total flux subtracted in 100 components = 0.0124176 Jy ! Clean residual min=-0.003644 max=0.005327 Jy/beam ! Clean residual mean=0.000005 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.123955 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.123955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089797Jy sigma=0.656082 ! Fit after self-cal, rms=0.089708Jy sigma=0.655340 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Added new window around map position (3, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053827 Jy ! Component: 100 - total flux cleaned = 0.00889056 Jy ! Total flux subtracted in 100 components = 0.00889056 Jy ! Clean residual min=-0.003154 max=0.003472 Jy/beam ! Clean residual mean=0.000002 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.132846 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.132846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089338Jy sigma=0.650927 ! Fit after self-cal, rms=0.089297Jy sigma=0.650531 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.8364 mas, bmaj=1.324 mas, bpa=4.354 degrees ! Estimated noise=0.533479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465571 Jy ! Component: 100 - total flux cleaned = 0.00714923 Jy ! Component: 150 - total flux cleaned = 0.00875538 Jy ! Component: 200 - total flux cleaned = 0.00924037 Jy ! Total flux subtracted in 200 components = 0.00924037 Jy ! Clean residual min=-0.002367 max=0.002399 Jy/beam ! Clean residual mean=0.000002 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.142086 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 47 components and 0.142086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089063Jy sigma=0.647714 ! Fit after self-cal, rms=0.089029Jy sigma=0.647194 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8364 x 1.324 at 4.354 degrees (North through East) ! Clean map min=-0.001925 max=0.080318 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.01 KP 0.99 LA 1.01 ! MK 1.17 NL 0.95 OV 1.01 PT 0.99 ! SC 1.15 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.94 FD 0.97 KP 1.05 LA 1.05 ! NL 1.05 PT 0.89 SC 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 EF 1.00* FD 0.99 HH 1.15 ! KP 0.96 LA 1.10 MC 0.97 NL 0.92 ! ON 1.00* OV 0.98 PT 0.96 SC 1.03 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 1.09 KP 1.05 LA 0.96 ! NL 0.99 PT 0.99 SC 0.95 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.07 FD 1.12 KP 0.96 LA 1.05 ! MK 0.84 NL 0.94 OV 1.05 PT 1.02 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 0.97 HH 1.02 KP 0.92 ! LA 1.05 MC 0.85 NL 0.98 ON 0.84 ! PT 0.94 SC 1.03 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.02 KP 0.92 LA 0.96 ! MK 1.16 NL 0.98 OV 0.99 PT 1.07 ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.93 FD 1.04 KP 0.96 LA 1.02 ! NL 1.05 PT 0.96 SC 1.17 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.04 EF 1.00* FD 1.01 HH 0.97 ! KP 0.99 LA 1.05 MC 0.84 NL 0.91 ! ON 1.00* OV 0.99 PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00 FD 0.98 KP 0.94 LA 1.01 ! MK 1.06 NL 0.98 OV 1.08 PT 1.04 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.16 EF 1.00* FD 0.97 HH 1.12 ! KP 1.02 LA 1.01 MC 1.04 NL 0.98 ! ON 1.00* OV 0.98 PT 0.96 SC 1.08 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.12 FD 1.05 KP 1.01 LA 0.96 ! MK 0.90 NL 0.95 OV 1.12 PT 0.96 ! ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 0.93 MC 1.16 ON 0.93 ! ZC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 1.00 HH 1.09 KP 0.96 ! LA 0.98 MC 1.16 NL 1.00 ON 0.96 ! PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.93 KP 0.95 LA 0.96 ! MK 1.13 NL 1.00 OV 1.14 PT 0.93 ! SC 1.19 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00 KP 1.00 LA 0.97 ! NL 1.08 PT 0.99 SC 0.91 ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* FD 1.01 KP 0.86 LA 1.01 ! MK 1.00* NL 1.00 OV 1.20 PT 1.07 ! ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.07 MC 0.99 ON 1.05 ! ZC 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 1.00 HH 1.04 KP 0.94 ! LA 1.05 MC 1.07 NL 1.04 ON 0.88 ! PT 0.87 SC 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.02 HH 1.08 ! KP 0.90 LA 0.98 MC 1.01 NL 1.03 ! ON 0.86 PT 0.96 SC 0.94 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.98 KP 0.95 LA 1.08 ! NL 0.98 PT 0.93 SC 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.05 HH 1.08 ! KP 0.91 LA 1.04 MC 1.11 NL 0.98 ! ON 1.00* OV 1.03 PT 0.89 SC 0.96 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* FD 0.99 KP 0.93 LA 1.01 ! MK 1.00* NL 0.92 OV 1.04 PT 0.90 ! ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 1.02 HH 0.96 KP 0.89 ! LA 1.00 MC 1.18 NL 1.02 ON 0.87 ! PT 1.05 SC 0.97 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.01 KP 0.90 LA 1.06 ! MK 1.04 NL 1.12 OV 0.99 PT 1.00 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.07 FD 0.93 KP 0.87 LA 1.18 ! NL 1.09 PT 0.98 SC 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.19 KP 0.94 LA 1.01 ! MK 1.12 NL 1.04 OV 0.97 PT 0.93 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 1.13 KP 0.86 LA 0.96 ! NL 1.17 PT 1.02 SC 0.89 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ! ! Fit before self-cal, rms=0.089029Jy sigma=0.647194 ! Fit after self-cal, rms=0.088760Jy sigma=0.647940 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.8288 mas, bmaj=1.463 mas, bpa=3.221 degrees ! Estimated noise=0.535827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-42.4, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246364 Jy ! Component: 100 - total flux cleaned = 0.00300839 Jy ! Component: 150 - total flux cleaned = 0.00341655 Jy ! Component: 200 - total flux cleaned = 0.00341833 Jy ! Total flux subtracted in 200 components = 0.00341833 Jy ! Clean residual min=-0.001641 max=0.001948 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.145505 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.145505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088682Jy sigma=0.647145 ! Fit after self-cal, rms=0.088681Jy sigma=0.646850 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Added new window around map position (-2.6, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189132 Jy ! Component: 100 - total flux cleaned = 0.00288261 Jy ! Component: 150 - total flux cleaned = 0.00314982 Jy ! Component: 200 - total flux cleaned = 0.00321771 Jy ! Total flux subtracted in 200 components = 0.00321771 Jy ! Clean residual min=-0.001634 max=0.001956 Jy/beam ! Clean residual mean=0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.148722 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 0.148722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088630Jy sigma=0.646347 ! Fit after self-cal, rms=0.088632Jy sigma=0.646271 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Added new window around map position (-18.4, 48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164891 Jy ! Component: 100 - total flux cleaned = 0.00235084 Jy ! Component: 150 - total flux cleaned = 0.00245171 Jy ! Component: 200 - total flux cleaned = 0.00251552 Jy ! Total flux subtracted in 200 components = 0.00251552 Jy ! Clean residual min=-0.001538 max=0.001674 Jy/beam ! Clean residual mean=0.000002 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.151238 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 0.151238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088592Jy sigma=0.645907 ! Fit after self-cal, rms=0.088592Jy sigma=0.645863 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088592Jy sigma=0.645863 ! Fit after self-cal, rms=0.088649Jy sigma=0.645534 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.8305 mas, bmaj=1.461 mas, bpa=3.265 degrees ! Estimated noise=0.535358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777428 Jy ! Component: 100 - total flux cleaned = 0.000939041 Jy ! Component: 150 - total flux cleaned = 0.000940987 Jy ! Component: 200 - total flux cleaned = 0.000941382 Jy ! Total flux subtracted in 200 components = 0.000941382 Jy ! Clean residual min=-0.001514 max=0.001576 Jy/beam ! Clean residual mean=0.000002 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.152179 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 92 components and 0.152179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088624Jy sigma=0.645365 ! Fit after self-cal, rms=0.088631Jy sigma=0.645340 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.8, 9.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013213 Jy ! Component: 100 - total flux cleaned = 0.00161665 Jy ! Component: 150 - total flux cleaned = 0.00170314 Jy ! Component: 200 - total flux cleaned = 0.0017873 Jy ! Total flux subtracted in 200 components = 0.0017873 Jy ! Clean residual min=-0.001462 max=0.001497 Jy/beam ! Clean residual mean=0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.153967 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 101 components and 0.153967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088598Jy sigma=0.645121 ! Fit after self-cal, rms=0.088597Jy sigma=0.645096 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Added new window around map position (25, 32.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101518 Jy ! Component: 100 - total flux cleaned = 0.00105645 Jy ! Component: 150 - total flux cleaned = 0.00111419 Jy ! Component: 200 - total flux cleaned = 0.00116664 Jy ! Total flux subtracted in 200 components = 0.00116664 Jy ! Clean residual min=-0.001462 max=0.001385 Jy/beam ! Clean residual mean=0.000002 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.155133 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.155133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088568Jy sigma=0.644898 ! Fit after self-cal, rms=0.088567Jy sigma=0.644876 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088567Jy sigma=0.644876 ! Fit after self-cal, rms=0.088707Jy sigma=0.644746 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.8314 mas, bmaj=1.461 mas, bpa=3.345 degrees ! Estimated noise=0.536272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283774 Jy ! Component: 100 - total flux cleaned = 0.000340383 Jy ! Component: 150 - total flux cleaned = 0.000393137 Jy ! Component: 200 - total flux cleaned = 0.000392009 Jy ! Total flux subtracted in 200 components = 0.000392009 Jy ! Clean residual min=-0.001448 max=0.001390 Jy/beam ! Clean residual mean=0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.155525 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 111 components and 0.155525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088689Jy sigma=0.644653 ! Fit after self-cal, rms=0.088693Jy sigma=0.644646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.29883e-05 Jy ! Component: 100 - total flux cleaned = 0.000108141 Jy ! Component: 150 - total flux cleaned = 0.000109114 Jy ! Component: 200 - total flux cleaned = 8.58484e-05 Jy ! Total flux subtracted in 200 components = 8.58484e-05 Jy ! Clean residual min=-0.001422 max=0.001392 Jy/beam ! Clean residual mean=0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.155611 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 115 components and 0.155611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088679Jy sigma=0.644567 ! Fit after self-cal, rms=0.088680Jy sigma=0.644564 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088680Jy sigma=0.644564 ! Fit after self-cal, rms=0.088743Jy sigma=0.644550 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=2.727 mas, bmaj=3.728 mas, bpa=-7.959 degrees ! Estimated noise=0.601659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334829 Jy ! Component: 100 - total flux cleaned = 0.000367091 Jy ! Component: 150 - total flux cleaned = 0.000353669 Jy ! Component: 200 - total flux cleaned = 0.000302263 Jy ! Total flux subtracted in 200 components = 0.000302263 Jy ! Clean residual min=-0.001238 max=0.001135 Jy/beam ! Clean residual mean=0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.155913 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.155913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088740Jy sigma=0.644518 ! Fit after self-cal, rms=0.088742Jy sigma=0.644510 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.63368e-05 Jy ! Component: 100 - total flux cleaned = 3.81644e-05 Jy ! Component: 150 - total flux cleaned = 1.53383e-05 Jy ! Component: 200 - total flux cleaned = -1.81719e-05 Jy ! Total flux subtracted in 200 components = -1.81719e-05 Jy ! Clean residual min=-0.001240 max=0.001133 Jy/beam ! Clean residual mean=0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.155895 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 135 components and 0.155895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088740Jy sigma=0.644495 ! Fit after self-cal, rms=0.088739Jy sigma=0.644493 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.8318 mas, bmaj=1.463 mas, bpa=3.374 degrees ! Estimated noise=0.536474 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8318 x 1.463 at 3.374 degrees (North through East) ! Clean map min=-0.001334 max=0.079513 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.6767 mas, bmaj=1.061 mas, bpa=11.18 degrees ! Estimated noise=1.04018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.069242 Jy ! Component: 100 - total flux cleaned = 0.0919163 Jy ! Component: 150 - total flux cleaned = 0.106413 Jy ! Component: 200 - total flux cleaned = 0.116474 Jy ! Total flux subtracted in 200 components = 0.116474 Jy ! Clean residual min=-0.003830 max=0.005687 Jy/beam ! Clean residual mean=0.000009 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.116474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.116474 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.8318 mas, bmaj=1.463 mas, bpa=3.374 degrees ! Estimated noise=0.536474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100081 Jy ! Component: 100 - total flux cleaned = 0.0162681 Jy ! Component: 150 - total flux cleaned = 0.0205161 Jy ! Component: 200 - total flux cleaned = 0.0237711 Jy ! Total flux subtracted in 200 components = 0.0237711 Jy ! Clean residual min=-0.002048 max=0.002340 Jy/beam ! Clean residual mean=0.000003 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.140245 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 52 components and 0.140245 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Added new window around map position (-1, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279797 Jy ! Component: 100 - total flux cleaned = 0.00513671 Jy ! Component: 150 - total flux cleaned = 0.00712839 Jy ! Component: 200 - total flux cleaned = 0.00884244 Jy ! Total flux subtracted in 200 components = 0.00884244 Jy ! Clean residual min=-0.001642 max=0.001548 Jy/beam ! Clean residual mean=0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.149087 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 71 components and 0.149087 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=2.727 mas, bmaj=3.728 mas, bpa=-7.959 degrees ! Estimated noise=0.601659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165023 Jy ! Component: 100 - total flux cleaned = 0.00290651 Jy ! Component: 150 - total flux cleaned = 0.00392653 Jy ! Component: 200 - total flux cleaned = 0.0047651 Jy ! Total flux subtracted in 200 components = 0.0047651 Jy ! Clean residual min=-0.001428 max=0.001161 Jy/beam ! Clean residual mean=0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.153852 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701772 Jy ! Component: 100 - total flux cleaned = 0.0011834 Jy ! Component: 150 - total flux cleaned = 0.00146085 Jy ! Component: 200 - total flux cleaned = 0.00157705 Jy ! Total flux subtracted in 200 components = 0.00157705 Jy ! Clean residual min=-0.001341 max=0.001175 Jy/beam ! Clean residual mean=0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.155429 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 121 components and 0.155429 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! Estimated beam: bmin=0.8318 mas, bmaj=1.463 mas, bpa=3.374 degrees ! Estimated noise=0.536474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278936 Jy ! Component: 100 - total flux cleaned = -0.000106663 Jy ! Component: 150 - total flux cleaned = 1.33842e-05 Jy ! Component: 200 - total flux cleaned = 9.04723e-05 Jy ! Total flux subtracted in 200 components = 9.04723e-05 Jy ! Clean residual min=-0.001487 max=0.001478 Jy/beam ! Clean residual mean=0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.15552 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.15552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089064Jy sigma=0.646422 ! Fit after self-cal, rms=0.088867Jy sigma=0.645186 wmodel /scr/pima/gb073_uvs/J2342-0322_X_map.mod ! Writing 137 model components to file: /scr/pima/gb073_uvs/J2342-0322_X_map.mod wobs /scr/pima/gb073_uvs/J2342-0322_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J2342-0322_X_uvs.fits wwins /scr/pima/gb073_uvs/J2342-0322_X_map.win ! wwins: Wrote 11 windows to /scr/pima/gb073_uvs/J2342-0322_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252854 Jy ! Component: 100 - total flux cleaned = -0.000612448 Jy ! Component: 150 - total flux cleaned = -0.000857378 Jy ! Component: 200 - total flux cleaned = -0.00102431 Jy ! Component: 250 - total flux cleaned = -0.00116338 Jy ! Component: 300 - total flux cleaned = -0.0013215 Jy ! Component: 350 - total flux cleaned = -0.00143203 Jy ! Component: 400 - total flux cleaned = -0.00158426 Jy ! Component: 450 - total flux cleaned = -0.00169099 Jy ! Component: 500 - total flux cleaned = -0.0017962 Jy ! Component: 550 - total flux cleaned = -0.00183767 Jy ! Component: 600 - total flux cleaned = -0.00189997 Jy ! Component: 650 - total flux cleaned = -0.00204255 Jy ! Component: 700 - total flux cleaned = -0.00212259 Jy ! Component: 750 - total flux cleaned = -0.00212262 Jy ! Component: 800 - total flux cleaned = -0.00228043 Jy ! Component: 850 - total flux cleaned = -0.00235883 Jy ! Component: 900 - total flux cleaned = -0.00251382 Jy ! Component: 950 - total flux cleaned = -0.00259047 Jy ! Component: 1000 - total flux cleaned = -0.00266686 Jy ! Component: 1050 - total flux cleaned = -0.00277999 Jy ! Component: 1100 - total flux cleaned = -0.00279876 Jy ! Component: 1150 - total flux cleaned = -0.00292879 Jy ! Component: 1200 - total flux cleaned = -0.0030023 Jy ! Component: 1250 - total flux cleaned = -0.00316671 Jy ! Component: 1300 - total flux cleaned = -0.0031848 Jy ! Component: 1350 - total flux cleaned = -0.00320286 Jy ! Component: 1400 - total flux cleaned = -0.00339935 Jy ! Component: 1450 - total flux cleaned = -0.00348808 Jy ! Component: 1500 - total flux cleaned = -0.00352308 Jy ! Component: 1550 - total flux cleaned = -0.00362796 Jy ! Component: 1600 - total flux cleaned = -0.00374959 Jy ! Component: 1650 - total flux cleaned = -0.00380135 Jy ! Component: 1700 - total flux cleaned = -0.00378425 Jy ! Component: 1750 - total flux cleaned = -0.00378428 Jy ! Component: 1800 - total flux cleaned = -0.00383519 Jy ! Component: 1850 - total flux cleaned = -0.00395329 Jy ! Component: 1900 - total flux cleaned = -0.00400349 Jy ! Component: 1950 - total flux cleaned = -0.0039868 Jy ! Component: 2000 - total flux cleaned = -0.0040863 Jy ! Component: 2050 - total flux cleaned = -0.00410269 Jy ! Component: 2100 - total flux cleaned = -0.00411919 Jy ! Component: 2150 - total flux cleaned = -0.00420064 Jy ! Component: 2200 - total flux cleaned = -0.00421694 Jy ! Component: 2250 - total flux cleaned = -0.00436181 Jy ! Component: 2300 - total flux cleaned = -0.00439389 Jy ! Component: 2350 - total flux cleaned = -0.00442586 Jy ! Component: 2400 - total flux cleaned = -0.00434643 Jy ! Component: 2450 - total flux cleaned = -0.00436236 Jy ! Component: 2500 - total flux cleaned = -0.00451929 Jy ! Component: 2550 - total flux cleaned = -0.00448798 Jy ! Component: 2600 - total flux cleaned = -0.0045346 Jy ! Component: 2650 - total flux cleaned = -0.00453467 Jy ! Component: 2700 - total flux cleaned = -0.00456543 Jy ! Component: 2750 - total flux cleaned = -0.00462657 Jy ! Component: 2800 - total flux cleaned = -0.00461133 Jy ! Component: 2850 - total flux cleaned = -0.00462646 Jy ! Component: 2900 - total flux cleaned = -0.00459626 Jy ! Component: 2950 - total flux cleaned = -0.00468646 Jy ! Component: 3000 - total flux cleaned = -0.00462661 Jy ! Component: 3050 - total flux cleaned = -0.00467107 Jy ! Component: 3100 - total flux cleaned = -0.00474521 Jy ! Component: 3150 - total flux cleaned = -0.00467157 Jy ! Component: 3200 - total flux cleaned = -0.00475961 Jy ! Component: 3250 - total flux cleaned = -0.00481804 Jy ! Component: 3300 - total flux cleaned = -0.00481789 Jy ! Component: 3350 - total flux cleaned = -0.00478889 Jy ! Component: 3400 - total flux cleaned = -0.0047745 Jy ! Component: 3450 - total flux cleaned = -0.00484621 Jy ! Component: 3500 - total flux cleaned = -0.00493204 Jy ! Component: 3550 - total flux cleaned = -0.00488923 Jy ! Component: 3600 - total flux cleaned = -0.00493188 Jy ! Component: 3650 - total flux cleaned = -0.0049461 Jy ! Component: 3700 - total flux cleaned = -0.00498824 Jy ! Component: 3750 - total flux cleaned = -0.00497424 Jy ! Component: 3800 - total flux cleaned = -0.00505786 Jy ! Component: 3850 - total flux cleaned = -0.0049884 Jy ! Component: 3900 - total flux cleaned = -0.00500219 Jy ! Component: 3950 - total flux cleaned = -0.00507097 Jy ! Component: 4000 - total flux cleaned = -0.00502979 Jy ! Component: 4050 - total flux cleaned = -0.00501614 Jy ! Total flux subtracted in 4096 components = -0.00504331 Jy ! Clean residual min=-0.000736 max=0.000748 Jy/beam ! Clean residual mean=-0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.150476 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 434 components and 0.150476 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J2342-0322_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8318 x 1.463 at 3.374 degrees (North through East) ! Clean map min=-0.0013051 max=0.079655 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J2342-0322_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0796548 invert ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1657 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.855905 0.855905 1.71181 3.42362 6.84724 13.6945 27.3889 54.7779 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.079 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 350.506 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J2342-0322_X_uvs.log closed on Sat Dec 26 09:46:48 2015