! Started logfile: ./J2318+2404_S_uvs.log on Sat Jan 2 10:02:19 2016 obs J2318+2404_S_uva.fits ! Reading UV FITS file: J2318+2404_S_uva.fits ! AN table 1: 40 integrations on 6 of 6 possible baselines. ! AN table 2: 48 integrations on 10 of 10 possible baselines. ! AN table 3: 24 integrations on 3 of 3 possible baselines. ! AN table 4: 35 integrations on 66 of 66 possible baselines. ! AN table 5: 13 integrations on 10 of 10 possible baselines. ! AN table 6: 24 integrations on 10 of 10 possible baselines. ! AN table 7: 14 integrations on 10 of 10 possible baselines. ! AN table 8: 16 integrations on 45 of 45 possible baselines. ! AN table 9: 34 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.714769 visibilities/baseline/integration-bin. ! Found source: J2318+2404 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 35464 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet ./J2318+2404_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 160 telescope corrections were flagged in sub-array 1. ! A total of 213 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 84 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 87 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! A total of 106 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 160 telescope corrections were flagged in sub-array 1. ! A total of 213 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 84 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 87 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! A total of 106 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 160 telescope corrections were flagged in sub-array 1. ! A total of 213 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 119 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 87 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! A total of 106 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 160 telescope corrections were flagged in sub-array 1. ! A total of 213 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 119 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 87 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! A total of 106 telescope corrections were flagged in sub-array 9. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 160 telescope corrections were flagged in sub-array 1. ! A total of 213 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 116 telescope corrections were flagged in sub-array 4. ! A total of 17 telescope corrections were flagged in sub-array 5. ! A total of 87 telescope corrections were flagged in sub-array 6. ! A total of 26 telescope corrections were flagged in sub-array 7. ! A total of 29 telescope corrections were flagged in sub-array 8. ! A total of 135 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 7. ! A total of 160 telescope corrections were flagged in sub-array 1. ! A total of 240 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 136 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 120 telescope corrections were flagged in sub-array 6. ! A total of 70 telescope corrections were flagged in sub-array 7. ! A total of 40 telescope corrections were flagged in sub-array 8. ! A total of 140 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 8. ! A total of 160 telescope corrections were flagged in sub-array 1. ! A total of 240 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 121 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 120 telescope corrections were flagged in sub-array 6. ! A total of 70 telescope corrections were flagged in sub-array 7. ! A total of 25 telescope corrections were flagged in sub-array 8. ! A total of 117 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=1.025111Jy sigma=9.008006 ! Fit after self-cal, rms=0.890182Jy sigma=8.283238 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.65 mas, bmaj=4.03 mas, bpa=-5.077 degrees ! Estimated noise=1.02121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0724441 Jy ! Component: 100 - total flux cleaned = 0.0943259 Jy ! Total flux subtracted in 100 components = 0.0943259 Jy ! Clean residual min=-0.007509 max=0.010961 Jy/beam ! Clean residual mean=-0.000004 rms=0.001979 Jy/beam ! Combined flux in latest and established models = 0.0943259 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0943259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.173808Jy sigma=0.824682 ! Fit after self-cal, rms=0.173123Jy sigma=0.819638 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139061 Jy ! Component: 100 - total flux cleaned = 0.0224215 Jy ! Total flux subtracted in 100 components = 0.0224215 Jy ! Clean residual min=-0.008131 max=0.009654 Jy/beam ! Clean residual mean=-0.000002 rms=0.001843 Jy/beam ! Combined flux in latest and established models = 0.116747 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.116747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.171239Jy sigma=0.798792 ! Fit after self-cal, rms=0.171309Jy sigma=0.798231 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.027 mas, bmaj=4.33 mas, bpa=-3.005 degrees ! Estimated noise=0.689835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010583 Jy ! Component: 100 - total flux cleaned = 0.0149731 Jy ! Component: 150 - total flux cleaned = 0.0160532 Jy ! Component: 200 - total flux cleaned = 0.0161393 Jy ! Total flux subtracted in 200 components = 0.0161393 Jy ! Clean residual min=-0.006695 max=0.009081 Jy/beam ! Clean residual mean=-0.000005 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.132887 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.132887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.169781Jy sigma=0.805526 ! Fit after self-cal, rms=0.169777Jy sigma=0.805428 ! Inverting map ! Added new window around map position (-29, 54). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00767082 Jy ! Component: 100 - total flux cleaned = 0.00944488 Jy ! Component: 150 - total flux cleaned = 0.00986808 Jy ! Component: 200 - total flux cleaned = 0.0100461 Jy ! Total flux subtracted in 200 components = 0.0100461 Jy ! Clean residual min=-0.005946 max=0.008642 Jy/beam ! Clean residual mean=-0.000007 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.142933 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.142933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.169338Jy sigma=0.799829 ! Fit after self-cal, rms=0.169092Jy sigma=0.798703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.027 x 4.33 at -3.005 degrees (North through East) ! Clean map min=-0.0052654 max=0.10841 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* MC 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* MC 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* MC 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.08 KP 0.99 NL 0.84 PT 0.97 ! SC 0.89 ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* MC 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* MC 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* MC 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.13 KP 0.83 NL 0.87 PT 0.97 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 0.00* MC 0.00* ON 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* MC 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00* KP 1.00* NL 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 0.00* MC 0.00* ON 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.169092Jy sigma=0.798703 ! Fit after self-cal, rms=0.168242Jy sigma=0.795106 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.027 mas, bmaj=4.297 mas, bpa=-2.619 degrees ! Estimated noise=0.702954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.5, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604325 Jy ! Component: 100 - total flux cleaned = 0.00752933 Jy ! Component: 150 - total flux cleaned = 0.00812969 Jy ! Component: 200 - total flux cleaned = 0.00823505 Jy ! Total flux subtracted in 200 components = 0.00823505 Jy ! Clean residual min=-0.005541 max=0.006153 Jy/beam ! Clean residual mean=-0.000007 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.151168 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.151168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.167850Jy sigma=0.791344 ! Fit after self-cal, rms=0.167659Jy sigma=0.790927 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.167659Jy sigma=0.790927 ! Fit after self-cal, rms=0.167664Jy sigma=0.790913 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=4.296 mas, bpa=-2.619 degrees ! Estimated noise=0.703162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125471 Jy ! Component: 100 - total flux cleaned = 0.00114928 Jy ! Component: 150 - total flux cleaned = 0.00114912 Jy ! Component: 200 - total flux cleaned = 0.00123678 Jy ! Total flux subtracted in 200 components = 0.00123678 Jy ! Clean residual min=-0.005443 max=0.006074 Jy/beam ! Clean residual mean=-0.000007 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.152405 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.152405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.167477Jy sigma=0.789799 ! Fit after self-cal, rms=0.167410Jy sigma=0.789746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155083 Jy ! Component: 100 - total flux cleaned = 0.00188619 Jy ! Component: 150 - total flux cleaned = 0.00162769 Jy ! Component: 200 - total flux cleaned = 0.00162996 Jy ! Total flux subtracted in 200 components = 0.00162996 Jy ! Clean residual min=-0.005087 max=0.005121 Jy/beam ! Clean residual mean=-0.000007 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.154035 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 92 components and 0.154035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.167184Jy sigma=0.781663 ! Fit after self-cal, rms=0.166956Jy sigma=0.780956 ! Inverting map ! Added new window around map position (99.5, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447493 Jy ! Component: 100 - total flux cleaned = 0.00558766 Jy ! Component: 150 - total flux cleaned = 0.00589099 Jy ! Component: 200 - total flux cleaned = 0.00625927 Jy ! Total flux subtracted in 200 components = 0.00625927 Jy ! Clean residual min=-0.004960 max=0.005151 Jy/beam ! Clean residual mean=-0.000011 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.160294 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 111 components and 0.160294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.166763Jy sigma=0.776629 ! Fit after self-cal, rms=0.166654Jy sigma=0.776252 ! Inverting map ! Added new window around map position (16, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481978 Jy ! Component: 100 - total flux cleaned = 0.00576732 Jy ! Component: 150 - total flux cleaned = 0.00596441 Jy ! Component: 200 - total flux cleaned = 0.00605669 Jy ! Total flux subtracted in 200 components = 0.00605669 Jy ! Clean residual min=-0.004702 max=0.004598 Jy/beam ! Clean residual mean=-0.000014 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.166351 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 122 components and 0.166351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.166457Jy sigma=0.772608 ! Fit after self-cal, rms=0.166334Jy sigma=0.772256 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.166334Jy sigma=0.772256 ! Fit after self-cal, rms=0.166266Jy sigma=0.771837 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.028 mas, bmaj=4.299 mas, bpa=-2.617 degrees ! Estimated noise=0.702083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107406 Jy ! Component: 100 - total flux cleaned = 0.00125072 Jy ! Component: 150 - total flux cleaned = 0.00125324 Jy ! Component: 200 - total flux cleaned = 0.00117694 Jy ! Total flux subtracted in 200 components = 0.00117694 Jy ! Clean residual min=-0.004795 max=0.004285 Jy/beam ! Clean residual mean=-0.000015 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.167528 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 125 components and 0.167528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.166136Jy sigma=0.770669 ! Fit after self-cal, rms=0.166079Jy sigma=0.770602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506727 Jy ! Component: 100 - total flux cleaned = 0.000506911 Jy ! Component: 150 - total flux cleaned = 0.000431325 Jy ! Component: 200 - total flux cleaned = 0.000359382 Jy ! Total flux subtracted in 200 components = 0.000359382 Jy ! Clean residual min=-0.004709 max=0.004235 Jy/beam ! Clean residual mean=-0.000015 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.167887 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 129 components and 0.167887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165970Jy sigma=0.769968 ! Fit after self-cal, rms=0.165909Jy sigma=0.769939 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165909Jy sigma=0.769939 ! Fit after self-cal, rms=0.165929Jy sigma=0.769931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.667 mas, bmaj=11.63 mas, bpa=-70.23 degrees ! Estimated noise=1.00961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115988 Jy ! Component: 100 - total flux cleaned = 0.00146412 Jy ! Component: 150 - total flux cleaned = 0.00166029 Jy ! Component: 200 - total flux cleaned = 0.00172015 Jy ! Total flux subtracted in 200 components = 0.00172015 Jy ! Clean residual min=-0.005091 max=0.005992 Jy/beam ! Clean residual mean=-0.000045 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.169607 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 142 components and 0.169607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165949Jy sigma=0.769594 ! Fit after self-cal, rms=0.165904Jy sigma=0.769523 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052561 Jy ! Component: 100 - total flux cleaned = 0.000692009 Jy ! Component: 150 - total flux cleaned = 0.000795542 Jy ! Component: 200 - total flux cleaned = 0.000892675 Jy ! Total flux subtracted in 200 components = 0.000892675 Jy ! Clean residual min=-0.004771 max=0.005879 Jy/beam ! Clean residual mean=-0.000046 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.1705 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 149 components and 0.1705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165927Jy sigma=0.769493 ! Fit after self-cal, rms=0.165917Jy sigma=0.769469 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.028 mas, bmaj=4.299 mas, bpa=-2.619 degrees ! Estimated noise=0.702155 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.028 x 4.299 at -2.619 degrees (North through East) ! Clean map min=-0.0051934 max=0.10977 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.647 mas, bmaj=4.01 mas, bpa=-5.078 degrees ! Estimated noise=1.02478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716824 Jy ! Component: 100 - total flux cleaned = 0.0946089 Jy ! Component: 150 - total flux cleaned = 0.110018 Jy ! Component: 200 - total flux cleaned = 0.121455 Jy ! Total flux subtracted in 200 components = 0.121455 Jy ! Clean residual min=-0.007491 max=0.009835 Jy/beam ! Clean residual mean=-0.000000 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.121455 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.121455 Jy ! Inverting map and beam ! Estimated beam: bmin=2.028 mas, bmaj=4.299 mas, bpa=-2.619 degrees ! Estimated noise=0.702155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158951 Jy ! Component: 100 - total flux cleaned = 0.0224712 Jy ! Component: 150 - total flux cleaned = 0.0269009 Jy ! Component: 200 - total flux cleaned = 0.0309686 Jy ! Total flux subtracted in 200 components = 0.0309686 Jy ! Clean residual min=-0.004835 max=0.005916 Jy/beam ! Clean residual mean=-0.000007 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.152423 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 45 components and 0.152423 Jy ! Inverting map ! Added new window around map position (5.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042801 Jy ! Component: 100 - total flux cleaned = 0.00666749 Jy ! Component: 150 - total flux cleaned = 0.0081194 Jy ! Component: 200 - total flux cleaned = 0.00962167 Jy ! Total flux subtracted in 200 components = 0.00962167 Jy ! Clean residual min=-0.004950 max=0.005645 Jy/beam ! Clean residual mean=-0.000011 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.162045 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 67 components and 0.162045 Jy ! Inverting map ! Added new window around map position (-68.5, 102). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436506 Jy ! Component: 100 - total flux cleaned = 0.00554418 Jy ! Component: 150 - total flux cleaned = 0.00636597 Jy ! Component: 200 - total flux cleaned = 0.00713701 Jy ! Total flux subtracted in 200 components = 0.00713701 Jy ! Clean residual min=-0.004752 max=0.004633 Jy/beam ! Clean residual mean=-0.000015 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.169182 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 83 components and 0.169182 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.667 mas, bmaj=11.63 mas, bpa=-70.23 degrees ! Estimated noise=1.00961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215983 Jy ! Component: 100 - total flux cleaned = 0.00311629 Jy ! Component: 150 - total flux cleaned = 0.00357874 Jy ! Component: 200 - total flux cleaned = 0.00407464 Jy ! Total flux subtracted in 200 components = 0.00407464 Jy ! Clean residual min=-0.005857 max=0.006024 Jy/beam ! Clean residual mean=-0.000045 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.173256 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226083 Jy ! Component: 100 - total flux cleaned = 0.00043679 Jy ! Component: 150 - total flux cleaned = 0.00056861 Jy ! Component: 200 - total flux cleaned = 0.000572189 Jy ! Total flux subtracted in 200 components = 0.000572189 Jy ! Clean residual min=-0.005396 max=0.005925 Jy/beam ! Clean residual mean=-0.000046 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.173829 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 113 components and 0.173829 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.028 mas, bmaj=4.299 mas, bpa=-2.619 degrees ! Estimated noise=0.702155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149364 Jy ! Component: 100 - total flux cleaned = -0.00172095 Jy ! Component: 150 - total flux cleaned = -0.00171586 Jy ! Component: 200 - total flux cleaned = -0.001614 Jy ! Total flux subtracted in 200 components = -0.001614 Jy ! Clean residual min=-0.004417 max=0.004281 Jy/beam ! Clean residual mean=-0.000017 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.172215 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 131 components and 0.172215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165954Jy sigma=0.771990 ! Fit after self-cal, rms=0.165986Jy sigma=0.771504 wmodel ./J2318+2404_S_map.mod ! Writing 131 model components to file: ./J2318+2404_S_map.mod wobs ./J2318+2404_S_uvs.fits ! Writing UV FITS file: ./J2318+2404_S_uvs.fits wwins ./J2318+2404_S_map.win ! wwins: Wrote 8 windows to ./J2318+2404_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388682 Jy ! Component: 100 - total flux cleaned = 0.00144997 Jy ! Component: 150 - total flux cleaned = 0.00239271 Jy ! Component: 200 - total flux cleaned = 0.00330657 Jy ! Component: 250 - total flux cleaned = 0.00391946 Jy ! Component: 300 - total flux cleaned = 0.00458402 Jy ! Component: 350 - total flux cleaned = 0.0051707 Jy ! Component: 400 - total flux cleaned = 0.00593723 Jy ! Component: 450 - total flux cleaned = 0.0065016 Jy ! Component: 500 - total flux cleaned = 0.00724162 Jy ! Component: 550 - total flux cleaned = 0.00772661 Jy ! Component: 600 - total flux cleaned = 0.00808603 Jy ! Component: 650 - total flux cleaned = 0.00873401 Jy ! Component: 700 - total flux cleaned = 0.00913987 Jy ! Component: 750 - total flux cleaned = 0.00959821 Jy ! Component: 800 - total flux cleaned = 0.00999427 Jy ! Component: 850 - total flux cleaned = 0.0104963 Jy ! Component: 900 - total flux cleaned = 0.010882 Jy ! Component: 950 - total flux cleaned = 0.0112636 Jy ! Component: 1000 - total flux cleaned = 0.0115871 Jy ! Component: 1050 - total flux cleaned = 0.0122802 Jy ! Component: 1100 - total flux cleaned = 0.0125955 Jy ! Component: 1150 - total flux cleaned = 0.0130124 Jy ! Component: 1200 - total flux cleaned = 0.0131672 Jy ! Component: 1250 - total flux cleaned = 0.0136785 Jy ! Component: 1300 - total flux cleaned = 0.0138808 Jy ! Component: 1350 - total flux cleaned = 0.0141816 Jy ! Component: 1400 - total flux cleaned = 0.0145792 Jy ! Component: 1450 - total flux cleaned = 0.0149722 Jy ! Component: 1500 - total flux cleaned = 0.015167 Jy ! Component: 1550 - total flux cleaned = 0.0155049 Jy ! Component: 1600 - total flux cleaned = 0.015696 Jy ! Component: 1650 - total flux cleaned = 0.0161223 Jy ! Component: 1700 - total flux cleaned = 0.01631 Jy ! Component: 1750 - total flux cleaned = 0.0164968 Jy ! Component: 1800 - total flux cleaned = 0.0168665 Jy ! Component: 1850 - total flux cleaned = 0.0170505 Jy ! Component: 1900 - total flux cleaned = 0.0173678 Jy ! Component: 1950 - total flux cleaned = 0.0174577 Jy ! Component: 2000 - total flux cleaned = 0.0177258 Jy ! Component: 2050 - total flux cleaned = 0.0179033 Jy ! Component: 2100 - total flux cleaned = 0.0181239 Jy ! Component: 2150 - total flux cleaned = 0.0184733 Jy ! Component: 2200 - total flux cleaned = 0.0186896 Jy ! Component: 2250 - total flux cleaned = 0.01869 Jy ! Component: 2300 - total flux cleaned = 0.018989 Jy ! Component: 2350 - total flux cleaned = 0.0190312 Jy ! Component: 2400 - total flux cleaned = 0.0192834 Jy ! Component: 2450 - total flux cleaned = 0.0195343 Jy ! Component: 2500 - total flux cleaned = 0.0194928 Jy ! Component: 2550 - total flux cleaned = 0.0196991 Jy ! Component: 2600 - total flux cleaned = 0.0199037 Jy ! Component: 2650 - total flux cleaned = 0.0199443 Jy ! Component: 2700 - total flux cleaned = 0.0201468 Jy ! Component: 2750 - total flux cleaned = 0.0202271 Jy ! Component: 2800 - total flux cleaned = 0.0203866 Jy ! Component: 2850 - total flux cleaned = 0.0205056 Jy ! Component: 2900 - total flux cleaned = 0.0205451 Jy ! Component: 2950 - total flux cleaned = 0.0207411 Jy ! Component: 3000 - total flux cleaned = 0.020741 Jy ! Component: 3050 - total flux cleaned = 0.0208965 Jy ! Component: 3100 - total flux cleaned = 0.0208967 Jy ! Component: 3150 - total flux cleaned = 0.0209734 Jy ! Component: 3200 - total flux cleaned = 0.0211641 Jy ! Component: 3250 - total flux cleaned = 0.0209745 Jy ! Component: 3300 - total flux cleaned = 0.0210876 Jy ! Component: 3350 - total flux cleaned = 0.0210125 Jy ! Component: 3400 - total flux cleaned = 0.0209752 Jy ! Component: 3450 - total flux cleaned = 0.021124 Jy ! Component: 3500 - total flux cleaned = 0.0210871 Jy ! Component: 3550 - total flux cleaned = 0.021124 Jy ! Component: 3600 - total flux cleaned = 0.0210874 Jy ! Component: 3650 - total flux cleaned = 0.0211968 Jy ! Component: 3700 - total flux cleaned = 0.0213059 Jy ! Component: 3750 - total flux cleaned = 0.0214505 Jy ! Component: 3800 - total flux cleaned = 0.0213425 Jy ! Component: 3850 - total flux cleaned = 0.0215219 Jy ! Component: 3900 - total flux cleaned = 0.0214149 Jy ! Component: 3950 - total flux cleaned = 0.0215568 Jy ! Component: 4000 - total flux cleaned = 0.0215215 Jy ! Component: 4050 - total flux cleaned = 0.0214861 Jy ! Total flux subtracted in 4096 components = 0.0215561 Jy ! Clean residual min=-0.002226 max=0.002146 Jy/beam ! Clean residual mean=-0.000018 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.193771 Jy keep ! Adding 360 model components to the UV plane model. ! The established model now contains 490 components and 0.193771 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "./J2318+2404_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.028 x 4.299 at -2.619 degrees (North through East) ! Clean map min=-0.0047615 max=0.10937 Jy/beam ! Writing clean map to FITS file: ./J2318+2404_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109374 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000616418 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.69076 1.69076 3.38152 6.76305 13.5261 27.0522 54.1044 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.109 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 177.434 quit ! Quitting program ! Log file ./J2318+2404_S_uvs.log closed on Sat Jan 2 10:02:26 2016