! Started logfile: ./J2129-1538_S_uvs.log on Sat Jan 2 10:01:00 2016 obs J2129-1538_S_uva.fits ! Reading UV FITS file: J2129-1538_S_uva.fits ! AN table 1: 12 integrations on 6 of 6 possible baselines. ! AN table 2: 11 integrations on 6 of 6 possible baselines. ! AN table 3: 11 integrations on 36 of 36 possible baselines. ! AN table 4: 36 integrations on 10 of 10 possible baselines. ! AN table 5: 11 integrations on 3 of 3 possible baselines. ! AN table 6: 11 integrations on 28 of 28 possible baselines. ! AN table 7: 11 integrations on 28 of 28 possible baselines. ! AN table 8: 11 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.910859 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 13488 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet ./J2129-1538_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 87 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 87 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 87 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 87 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 87 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 14 telescope corrections were flagged in sub-array 2. ! A total of 180 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 180 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.326401Jy sigma=9.237273 ! Fit after self-cal, rms=0.328442Jy sigma=2.221668 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=5.684 mas, bpa=3.098 degrees ! Estimated noise=1.63853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.617027 Jy ! Component: 100 - total flux cleaned = 0.776589 Jy ! Total flux subtracted in 100 components = 0.776589 Jy ! Clean residual min=-0.037057 max=0.062177 Jy/beam ! Clean residual mean=-0.000607 rms=0.008137 Jy/beam ! Combined flux in latest and established models = 0.776589 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.776589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.280886Jy sigma=1.590819 ! Fit after self-cal, rms=0.280881Jy sigma=1.590739 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.062197 Jy ! Component: 100 - total flux cleaned = 0.0866666 Jy ! Total flux subtracted in 100 components = 0.0866666 Jy ! Clean residual min=-0.027583 max=0.025736 Jy/beam ! Clean residual mean=-0.000674 rms=0.006965 Jy/beam ! Combined flux in latest and established models = 0.863256 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 14 components and 0.863256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.267491Jy sigma=1.568992 ! Fit after self-cal, rms=0.267530Jy sigma=1.568958 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=7.401 mas, bpa=-0.03541 degrees ! Estimated noise=1.1077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122738 Jy ! Component: 100 - total flux cleaned = -0.0156358 Jy ! Component: 150 - total flux cleaned = -0.0167654 Jy ! Component: 200 - total flux cleaned = -0.0176025 Jy ! Total flux subtracted in 200 components = -0.0176025 Jy ! Clean residual min=-0.030434 max=0.033227 Jy/beam ! Clean residual mean=-0.000725 rms=0.010690 Jy/beam ! Combined flux in latest and established models = 0.845653 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.845653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.267461Jy sigma=1.554715 ! Fit after self-cal, rms=0.267440Jy sigma=1.554692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.343 x 7.401 at -0.03541 degrees (North through East) ! Clean map min=-0.029839 max=0.80506 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* MC 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.95 KP 1.02 LA 1.00 ! MK 1.03 NL 0.89 OV 0.97 PT 1.02 ! SC 1.01 ! ! A total of 93 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.90 FD 0.97 KP 1.01 LA 1.01 ! MK 1.04 NL 0.89 PT 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.94 FD 0.96 KP 1.00 LA 0.99 ! NL 0.88 OV 0.99 PT 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.93 FD 0.97 KP 1.00 LA 0.97 ! MK 1.00 NL 0.89 OV 0.97 PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* MC 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.95 KP 1.03 LA 1.08 ! MK 1.00 NL 0.98 OV 0.95 PT 1.03 ! SC 1.03 ! ! A total of 93 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 0.96 KP 1.01 LA 1.05 ! MK 0.98 NL 0.99 PT 1.03 SC 1.04 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.93 FD 0.98 KP 1.01 LA 1.08 ! NL 0.97 OV 0.96 PT 1.03 SC 1.01 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.94 FD 0.96 KP 1.02 LA 1.08 ! MK 0.97 NL 0.98 OV 0.95 PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* MC 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 KP 1.00 LA 0.99 ! MK 1.15 NL 0.96 OV 1.00* PT 0.97 ! SC 1.11 ! ! A total of 93 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.00 KP 1.00 LA 0.99 ! MK 1.11 NL 0.97 PT 0.97 SC 1.07 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 FD 1.01 KP 1.01 LA 0.99 ! NL 0.93 OV 1.00* PT 0.98 SC 1.06 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.01 FD 0.99 KP 0.99 LA 1.01 ! MK 1.08 NL 0.97 OV 1.00* PT 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* MC 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 KP 0.98 LA 1.03 ! MK 1.02 NL 1.02 OV 1.00* PT 0.98 ! SC 1.06 ! ! A total of 93 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.99 KP 0.98 LA 0.98 ! MK 1.03 NL 1.01 PT 0.99 SC 1.05 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 1.00 KP 1.00 LA 1.01 ! NL 0.99 OV 1.00* PT 1.01 SC 1.04 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.04 FD 0.98 KP 0.98 LA 0.98 ! MK 1.05 NL 1.00 OV 1.00* PT 0.97 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* MC 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 KP 0.85 LA 0.98 ! MK 1.01 NL 1.05 OV 1.01 PT 1.00* ! SC 1.00 ! ! A total of 93 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 1.00 KP 0.84 LA 0.98 ! MK 1.01 NL 1.08 PT 1.00* SC 0.98 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 0.98 KP 0.84 LA 0.98 ! NL 1.05 OV 1.00 PT 1.00* SC 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.05 FD 1.00 KP 0.84 LA 0.97 ! MK 1.00 NL 1.06 OV 1.01 PT 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* HH 0.00* MC 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* MC 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ! ! Fit before self-cal, rms=0.267440Jy sigma=1.554692 ! Fit after self-cal, rms=0.228998Jy sigma=0.902686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=7.628 mas, bpa=0.2677 degrees ! Estimated noise=1.15599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244877 Jy ! Component: 100 - total flux cleaned = 0.0353984 Jy ! Component: 150 - total flux cleaned = 0.0411022 Jy ! Component: 200 - total flux cleaned = 0.0433595 Jy ! Total flux subtracted in 200 components = 0.0433595 Jy ! Clean residual min=-0.011863 max=0.010867 Jy/beam ! Clean residual mean=0.000012 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.889013 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.889013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.225330Jy sigma=0.884518 ! Fit after self-cal, rms=0.225349Jy sigma=0.884432 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.225349Jy sigma=0.884432 ! Fit after self-cal, rms=0.223855Jy sigma=0.845961 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=7.578 mas, bpa=0.2318 degrees ! Estimated noise=1.18031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168192 Jy ! Component: 100 - total flux cleaned = 0.0244854 Jy ! Component: 150 - total flux cleaned = 0.0285641 Jy ! Component: 200 - total flux cleaned = 0.0300449 Jy ! Total flux subtracted in 200 components = 0.0300449 Jy ! Clean residual min=-0.009014 max=0.009044 Jy/beam ! Clean residual mean=0.000018 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 0.919057 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.919057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.221893Jy sigma=0.837979 ! Fit after self-cal, rms=0.221896Jy sigma=0.837953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354725 Jy ! Component: 100 - total flux cleaned = 0.000578391 Jy ! Component: 150 - total flux cleaned = 0.000721856 Jy ! Component: 200 - total flux cleaned = 0.0007939 Jy ! Total flux subtracted in 200 components = 0.0007939 Jy ! Clean residual min=-0.008984 max=0.008984 Jy/beam ! Clean residual mean=0.000018 rms=0.002353 Jy/beam ! Combined flux in latest and established models = 0.919851 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.919851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.221742Jy sigma=0.837741 ! Fit after self-cal, rms=0.221743Jy sigma=0.837734 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.221743Jy sigma=0.837734 ! Fit after self-cal, rms=0.218674Jy sigma=0.794126 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.55 mas, bpa=0.2076 degrees ! Estimated noise=1.19912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012575 Jy ! Component: 100 - total flux cleaned = 0.0175597 Jy ! Component: 150 - total flux cleaned = 0.0194902 Jy ! Component: 200 - total flux cleaned = 0.0196996 Jy ! Total flux subtracted in 200 components = 0.0196996 Jy ! Clean residual min=-0.006593 max=0.007213 Jy/beam ! Clean residual mean=0.000023 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.939551 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.939551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.217712Jy sigma=0.789088 ! Fit after self-cal, rms=0.217713Jy sigma=0.789042 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215494 Jy ! Component: 100 - total flux cleaned = 0.000276711 Jy ! Component: 150 - total flux cleaned = 0.000278024 Jy ! Component: 200 - total flux cleaned = 0.000277812 Jy ! Total flux subtracted in 200 components = 0.000277812 Jy ! Clean residual min=-0.006588 max=0.007199 Jy/beam ! Clean residual mean=0.000023 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.939829 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.939829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.217579Jy sigma=0.788927 ! Fit after self-cal, rms=0.217582Jy sigma=0.788919 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.217582Jy sigma=0.788919 ! Fit after self-cal, rms=0.217806Jy sigma=0.782500 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.015 mas, bmaj=15.24 mas, bpa=0.3786 degrees ! Estimated noise=1.45786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140889 Jy ! Component: 100 - total flux cleaned = 0.0190227 Jy ! Component: 150 - total flux cleaned = 0.0209096 Jy ! Component: 200 - total flux cleaned = 0.0213156 Jy ! Total flux subtracted in 200 components = 0.0213156 Jy ! Clean residual min=-0.006709 max=0.009347 Jy/beam ! Clean residual mean=0.000048 rms=0.002429 Jy/beam ! Combined flux in latest and established models = 0.961144 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.961144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.217125Jy sigma=0.781415 ! Fit after self-cal, rms=0.217141Jy sigma=0.781359 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335119 Jy ! Component: 100 - total flux cleaned = 0.000368085 Jy ! Component: 150 - total flux cleaned = 0.00043151 Jy ! Component: 200 - total flux cleaned = 0.000520838 Jy ! Total flux subtracted in 200 components = 0.000520838 Jy ! Clean residual min=-0.006700 max=0.009342 Jy/beam ! Clean residual mean=0.000048 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 0.961665 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.961665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.217159Jy sigma=0.781213 ! Fit after self-cal, rms=0.217157Jy sigma=0.781187 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=7.54 mas, bpa=0.1025 degrees ! Estimated noise=1.21514 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.268 x 7.54 at 0.1025 degrees (North through East) ! Clean map min=-0.0065872 max=0.85303 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.217157Jy sigma=0.781187 ! Fit after self-cal, rms=0.212746Jy sigma=0.714251 ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.527 mas, bpa=0.3517 degrees ! Estimated noise=1.22769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00801982 Jy ! Component: 100 - total flux cleaned = 0.0112034 Jy ! Component: 150 - total flux cleaned = 0.0119762 Jy ! Component: 200 - total flux cleaned = 0.0119742 Jy ! Total flux subtracted in 200 components = 0.0119742 Jy ! Clean residual min=-0.006321 max=0.007034 Jy/beam ! Clean residual mean=0.000030 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.973639 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.973639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.212323Jy sigma=0.712112 ! Fit after self-cal, rms=0.212328Jy sigma=0.712104 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00992e-05 Jy ! Component: 100 - total flux cleaned = -3.40596e-05 Jy ! Component: 150 - total flux cleaned = -3.38709e-05 Jy ! Component: 200 - total flux cleaned = -7.635e-05 Jy ! Total flux subtracted in 200 components = -7.635e-05 Jy ! Clean residual min=-0.006272 max=0.007028 Jy/beam ! Clean residual mean=0.000031 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.973563 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.973563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.212265Jy sigma=0.712011 ! Fit after self-cal, rms=0.212268Jy sigma=0.712006 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.212268Jy sigma=0.712006 ! Fit after self-cal, rms=0.211386Jy sigma=0.697511 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=5.738 mas, bpa=4.876 degrees ! Estimated noise=1.80322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.66454 Jy ! Component: 100 - total flux cleaned = 0.841634 Jy ! Component: 150 - total flux cleaned = 0.911612 Jy ! Component: 200 - total flux cleaned = 0.942601 Jy ! Total flux subtracted in 200 components = 0.942601 Jy ! Clean residual min=-0.011676 max=0.014925 Jy/beam ! Clean residual mean=-0.000000 rms=0.002768 Jy/beam ! Combined flux in latest and established models = 0.942601 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.942601 Jy ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.515 mas, bpa=0.3674 degrees ! Estimated noise=1.23635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199358 Jy ! Component: 100 - total flux cleaned = 0.0296062 Jy ! Component: 150 - total flux cleaned = 0.034554 Jy ! Component: 200 - total flux cleaned = 0.0366071 Jy ! Total flux subtracted in 200 components = 0.0366071 Jy ! Clean residual min=-0.005703 max=0.006659 Jy/beam ! Clean residual mean=0.000028 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.979208 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.979208 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9 mas, bmaj=15.23 mas, bpa=0.5366 degrees ! Estimated noise=1.48951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226317 Jy ! Component: 100 - total flux cleaned = 0.00247235 Jy ! Component: 150 - total flux cleaned = 0.00260246 Jy ! Component: 200 - total flux cleaned = 0.00278247 Jy ! Total flux subtracted in 200 components = 0.00278247 Jy ! Clean residual min=-0.005632 max=0.008478 Jy/beam ! Clean residual mean=0.000054 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 0.98199 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164494 Jy ! Component: 100 - total flux cleaned = 0.000266583 Jy ! Component: 150 - total flux cleaned = 0.000408444 Jy ! Component: 200 - total flux cleaned = 0.00049784 Jy ! Total flux subtracted in 200 components = 0.00049784 Jy ! Clean residual min=-0.005555 max=0.008402 Jy/beam ! Clean residual mean=0.000054 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.982488 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 33 components and 0.982488 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.515 mas, bpa=0.3674 degrees ! Estimated noise=1.23635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000916075 Jy ! Component: 100 - total flux cleaned = -0.000798089 Jy ! Component: 150 - total flux cleaned = -0.000885352 Jy ! Component: 200 - total flux cleaned = -0.000968518 Jy ! Total flux subtracted in 200 components = -0.000968518 Jy ! Clean residual min=-0.005964 max=0.006822 Jy/beam ! Clean residual mean=0.000027 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.981519 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.981519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.211475Jy sigma=0.698230 ! Fit after self-cal, rms=0.211472Jy sigma=0.698208 wmodel ./J2129-1538_S_map.mod ! Writing 41 model components to file: ./J2129-1538_S_map.mod wobs ./J2129-1538_S_uvs.fits ! Writing UV FITS file: ./J2129-1538_S_uvs.fits wwins ./J2129-1538_S_map.win ! wwins: Wrote 1 windows to ./J2129-1538_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270118 Jy ! Component: 100 - total flux cleaned = 0.00424975 Jy ! Component: 150 - total flux cleaned = 0.00539264 Jy ! Component: 200 - total flux cleaned = 0.00628124 Jy ! Component: 250 - total flux cleaned = 0.00722647 Jy ! Component: 300 - total flux cleaned = 0.00786688 Jy ! Component: 350 - total flux cleaned = 0.00839901 Jy ! Component: 400 - total flux cleaned = 0.00891814 Jy ! Component: 450 - total flux cleaned = 0.00891902 Jy ! Component: 500 - total flux cleaned = 0.00933251 Jy ! Component: 550 - total flux cleaned = 0.00932998 Jy ! Component: 600 - total flux cleaned = 0.0091682 Jy ! Component: 650 - total flux cleaned = 0.00916763 Jy ! Component: 700 - total flux cleaned = 0.00909106 Jy ! Component: 750 - total flux cleaned = 0.00931811 Jy ! Component: 800 - total flux cleaned = 0.0091674 Jy ! Component: 850 - total flux cleaned = 0.0090941 Jy ! Component: 900 - total flux cleaned = 0.00909323 Jy ! Component: 950 - total flux cleaned = 0.00902106 Jy ! Component: 1000 - total flux cleaned = 0.00881032 Jy ! Component: 1050 - total flux cleaned = 0.00887831 Jy ! Component: 1100 - total flux cleaned = 0.00860397 Jy ! Component: 1150 - total flux cleaned = 0.00840217 Jy ! Component: 1200 - total flux cleaned = 0.00840112 Jy ! Component: 1250 - total flux cleaned = 0.00813703 Jy ! Component: 1300 - total flux cleaned = 0.00794088 Jy ! Component: 1350 - total flux cleaned = 0.00761761 Jy ! Component: 1400 - total flux cleaned = 0.00742524 Jy ! Component: 1450 - total flux cleaned = 0.00717101 Jy ! Component: 1500 - total flux cleaned = 0.00666931 Jy ! Component: 1550 - total flux cleaned = 0.00660741 Jy ! Component: 1600 - total flux cleaned = 0.00636076 Jy ! Component: 1650 - total flux cleaned = 0.00617748 Jy ! Component: 1700 - total flux cleaned = 0.00599596 Jy ! Component: 1750 - total flux cleaned = 0.00563552 Jy ! Component: 1800 - total flux cleaned = 0.00545676 Jy ! Component: 1850 - total flux cleaned = 0.00522095 Jy ! Component: 1900 - total flux cleaned = 0.00498681 Jy ! Component: 1950 - total flux cleaned = 0.0047541 Jy ! Component: 2000 - total flux cleaned = 0.00440868 Jy ! Component: 2050 - total flux cleaned = 0.00418068 Jy ! Component: 2100 - total flux cleaned = 0.00418091 Jy ! Component: 2150 - total flux cleaned = 0.00412582 Jy ! Component: 2200 - total flux cleaned = 0.00384684 Jy ! Component: 2250 - total flux cleaned = 0.00384684 Jy ! Component: 2300 - total flux cleaned = 0.00362617 Jy ! Component: 2350 - total flux cleaned = 0.00373537 Jy ! Component: 2400 - total flux cleaned = 0.00341014 Jy ! Component: 2450 - total flux cleaned = 0.00346412 Jy ! Component: 2500 - total flux cleaned = 0.00357109 Jy ! Component: 2550 - total flux cleaned = 0.0035182 Jy ! Component: 2600 - total flux cleaned = 0.00362385 Jy ! Component: 2650 - total flux cleaned = 0.0036238 Jy ! Component: 2700 - total flux cleaned = 0.00372802 Jy ! Component: 2750 - total flux cleaned = 0.00362426 Jy ! Component: 2800 - total flux cleaned = 0.00367646 Jy ! Component: 2850 - total flux cleaned = 0.00362524 Jy ! Component: 2900 - total flux cleaned = 0.00357473 Jy ! Component: 2950 - total flux cleaned = 0.00337249 Jy ! Component: 3000 - total flux cleaned = 0.00347354 Jy ! Component: 3050 - total flux cleaned = 0.00357333 Jy ! Component: 3100 - total flux cleaned = 0.00342467 Jy ! Component: 3150 - total flux cleaned = 0.00357255 Jy ! Component: 3200 - total flux cleaned = 0.00367064 Jy ! Component: 3250 - total flux cleaned = 0.00352482 Jy ! Component: 3300 - total flux cleaned = 0.00342821 Jy ! Component: 3350 - total flux cleaned = 0.00352445 Jy ! Component: 3400 - total flux cleaned = 0.00333298 Jy ! Component: 3450 - total flux cleaned = 0.00342802 Jy ! Component: 3500 - total flux cleaned = 0.00342832 Jy ! Component: 3550 - total flux cleaned = 0.00352204 Jy ! Component: 3600 - total flux cleaned = 0.00333478 Jy ! Component: 3650 - total flux cleaned = 0.00338142 Jy ! Component: 3700 - total flux cleaned = 0.00333491 Jy ! Component: 3750 - total flux cleaned = 0.00347273 Jy ! Component: 3800 - total flux cleaned = 0.00324368 Jy ! Component: 3850 - total flux cleaned = 0.00333522 Jy ! Component: 3900 - total flux cleaned = 0.00338071 Jy ! Component: 3950 - total flux cleaned = 0.00333547 Jy ! Component: 4000 - total flux cleaned = 0.00324543 Jy ! Component: 4050 - total flux cleaned = 0.00315635 Jy ! Total flux subtracted in 4096 components = 0.00320048 Jy ! Clean residual min=-0.002446 max=0.002367 Jy/beam ! Clean residual mean=-0.000000 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.98472 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 316 components and 0.98472 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "./J2129-1538_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 7.515 at 0.3674 degrees (North through East) ! Clean map min=-0.0045709 max=0.86845 Jy/beam ! Writing clean map to FITS file: ./J2129-1538_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.868448 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000786445 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.271672 0.271672 0.543345 1.08669 2.17338 4.34676 8.69351 17.387 34.7741 69.5481 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.868 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1104.27 quit ! Quitting program ! Log file ./J2129-1538_S_uvs.log closed on Sat Jan 2 10:01:05 2016