! Started logfile: ./J2109+8021_S_uvs.log on Sat Jan 2 10:00:50 2016 obs J2109+8021_S_uva.fits ! Reading UV FITS file: J2109+8021_S_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! AN table 2: 59 integrations on 45 of 45 possible baselines. ! AN table 3: 58 integrations on 6 of 6 possible baselines. ! AN table 4: 118 integrations on 55 of 55 possible baselines. ! AN table 5: 58 integrations on 66 of 66 possible baselines. ! AN table 6: 59 integrations on 36 of 36 possible baselines. ! AN table 7: 59 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.867504 visibilities/baseline/integration-bin. ! Found source: J2109+8021 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 144200 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet ./J2109+8021_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 208 telescope corrections were flagged in sub-array 4. ! A total of 60 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 70 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! A total of 75 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 208 telescope corrections were flagged in sub-array 4. ! A total of 60 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 70 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 121 telescope corrections were flagged in sub-array 1. ! A total of 133 telescope corrections were flagged in sub-array 2. ! A total of 232 telescope corrections were flagged in sub-array 3. ! A total of 324 telescope corrections were flagged in sub-array 4. ! A total of 118 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 128 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 121 telescope corrections were flagged in sub-array 1. ! A total of 133 telescope corrections were flagged in sub-array 2. ! A total of 232 telescope corrections were flagged in sub-array 3. ! A total of 324 telescope corrections were flagged in sub-array 4. ! A total of 118 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 128 telescope corrections were flagged in sub-array 7. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 121 telescope corrections were flagged in sub-array 1. ! A total of 133 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 383 telescope corrections were flagged in sub-array 4. ! A total of 117 telescope corrections were flagged in sub-array 5. ! A total of 130 telescope corrections were flagged in sub-array 6. ! A total of 128 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 7. ! A total of 116 telescope corrections were flagged in sub-array 1. ! A total of 126 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 312 telescope corrections were flagged in sub-array 4. ! A total of 117 telescope corrections were flagged in sub-array 5. ! A total of 125 telescope corrections were flagged in sub-array 6. ! A total of 127 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 8. ! A total of 116 telescope corrections were flagged in sub-array 1. ! A total of 126 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 312 telescope corrections were flagged in sub-array 4. ! A total of 117 telescope corrections were flagged in sub-array 5. ! A total of 125 telescope corrections were flagged in sub-array 6. ! A total of 127 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.006621Jy sigma=10.499201 ! Fit after self-cal, rms=0.955560Jy sigma=10.126296 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.724 mas, bmaj=2.723 mas, bpa=13.1 degrees ! Estimated noise=0.494911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029916 Jy ! Component: 100 - total flux cleaned = 0.0398758 Jy ! Total flux subtracted in 100 components = 0.0398758 Jy ! Clean residual min=-0.004856 max=0.006741 Jy/beam ! Clean residual mean=-0.000001 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0398758 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0398758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103714Jy sigma=0.691225 ! Fit after self-cal, rms=0.101804Jy sigma=0.676381 ! Inverting map ! Added new window around map position (-2.5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00871421 Jy ! Component: 100 - total flux cleaned = 0.0140158 Jy ! Total flux subtracted in 100 components = 0.0140158 Jy ! Clean residual min=-0.004085 max=0.005090 Jy/beam ! Clean residual mean=-0.000001 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0538915 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.0538915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.100595Jy sigma=0.664132 ! Fit after self-cal, rms=0.100033Jy sigma=0.662758 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446746 Jy ! Component: 100 - total flux cleaned = 0.00618984 Jy ! Total flux subtracted in 100 components = 0.00618984 Jy ! Clean residual min=-0.003343 max=0.002982 Jy/beam ! Clean residual mean=-0.000001 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0600814 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0600814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099872Jy sigma=0.659996 ! Fit after self-cal, rms=0.099615Jy sigma=0.659432 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=3.508 mas, bpa=15.69 degrees ! Estimated noise=0.275383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165193 Jy ! Component: 100 - total flux cleaned = 0.00195998 Jy ! Component: 150 - total flux cleaned = 0.00215817 Jy ! Component: 200 - total flux cleaned = 0.00228757 Jy ! Total flux subtracted in 200 components = 0.00228757 Jy ! Clean residual min=-0.001679 max=0.001957 Jy/beam ! Clean residual mean=-0.000002 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.062369 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.062369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099560Jy sigma=0.658630 ! Fit after self-cal, rms=0.099418Jy sigma=0.658310 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.367 x 3.508 at 15.69 degrees (North through East) ! Clean map min=-0.001576 max=0.043699 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ZC 1.00* ! ! A total of 174 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ZC 1.00* ! ! A total of 174 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 EF 1.07 FD 0.99 KP 0.88 ! LA 0.97 MK 0.92 NL 1.16 PT 1.09 ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 EF 1.17 FD 0.93 KP 1.15 ! LA 1.11 NL 0.97 OV 1.00* PT 0.89 ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 EF 0.84 FD 1.13 KP 1.06 ! LA 0.85 MK 0.88 NL 1.08 PT 1.15 ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 EF 1.01 FD 0.93 KP 1.13 ! LA 0.98 MK 0.94 NL 1.13 OV 1.00* ! PT 1.01 SC 0.98 ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ZC 1.00* ! ! A total of 174 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 EF 1.11 FD 1.02 KP 1.02 ! LA 0.93 MK 0.93 NL 1.12 PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 EF 1.00* FD 0.89 KP 0.85 ! LA 1.05 NL 0.85 OV 0.96 PT 0.93 ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ZC 1.00* ! ! A total of 174 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.07 EF 1.00* FD 0.93 KP 0.95 ! LA 0.97 MK 0.98 NL 1.17 OV 0.98 ! PT 1.12 SC 0.87 ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ZC 1.00* ! ! A total of 174 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.099418Jy sigma=0.658310 ! Fit after self-cal, rms=0.099562Jy sigma=0.660100 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.36 mas, bmaj=3.526 mas, bpa=15.75 degrees ! Estimated noise=0.27541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306675 Jy ! Component: 100 - total flux cleaned = 0.000280496 Jy ! Component: 150 - total flux cleaned = 0.000207992 Jy ! Component: 200 - total flux cleaned = 0.000164124 Jy ! Total flux subtracted in 200 components = 0.000164124 Jy ! Clean residual min=-0.001621 max=0.001662 Jy/beam ! Clean residual mean=-0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0625331 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.0625331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099531Jy sigma=0.659968 ! Fit after self-cal, rms=0.099497Jy sigma=0.659843 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099497Jy sigma=0.659843 ! Fit after self-cal, rms=0.099369Jy sigma=0.659633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.365 mas, bmaj=3.535 mas, bpa=15.74 degrees ! Estimated noise=0.275341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.45389e-05 Jy ! Component: 100 - total flux cleaned = -2.72536e-05 Jy ! Component: 150 - total flux cleaned = -0.000127112 Jy ! Component: 200 - total flux cleaned = -0.000200249 Jy ! Total flux subtracted in 200 components = -0.000200249 Jy ! Clean residual min=-0.001635 max=0.001661 Jy/beam ! Clean residual mean=-0.000004 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0623328 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.0623328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099347Jy sigma=0.659595 ! Fit after self-cal, rms=0.099352Jy sigma=0.659451 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022464 Jy ! Component: 100 - total flux cleaned = 0.000150223 Jy ! Component: 150 - total flux cleaned = 8.08409e-05 Jy ! Component: 200 - total flux cleaned = 1.66102e-05 Jy ! Total flux subtracted in 200 components = 1.66102e-05 Jy ! Clean residual min=-0.001656 max=0.001659 Jy/beam ! Clean residual mean=-0.000003 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0623494 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.0623494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099338Jy sigma=0.659422 ! Fit after self-cal, rms=0.099318Jy sigma=0.659369 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099318Jy sigma=0.659369 ! Fit after self-cal, rms=0.099555Jy sigma=0.659350 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=3.536 mas, bpa=15.69 degrees ! Estimated noise=0.275267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106301 Jy ! Component: 100 - total flux cleaned = 3.75535e-05 Jy ! Component: 150 - total flux cleaned = -2.69295e-05 Jy ! Component: 200 - total flux cleaned = -8.69346e-05 Jy ! Total flux subtracted in 200 components = -8.69346e-05 Jy ! Clean residual min=-0.001629 max=0.001651 Jy/beam ! Clean residual mean=-0.000004 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0622625 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.0622625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099541Jy sigma=0.659346 ! Fit after self-cal, rms=0.099547Jy sigma=0.659296 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103423 Jy ! Component: 100 - total flux cleaned = 4.31101e-05 Jy ! Component: 150 - total flux cleaned = 1.45158e-05 Jy ! Component: 200 - total flux cleaned = -2.59585e-05 Jy ! Total flux subtracted in 200 components = -2.59585e-05 Jy ! Clean residual min=-0.001665 max=0.001652 Jy/beam ! Clean residual mean=-0.000004 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0622365 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0622365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099536Jy sigma=0.659287 ! Fit after self-cal, rms=0.099529Jy sigma=0.659276 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099529Jy sigma=0.659276 ! Fit after self-cal, rms=0.099569Jy sigma=0.659218 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.976 mas, bmaj=12.77 mas, bpa=77.82 degrees ! Estimated noise=0.432033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381409 Jy ! Component: 100 - total flux cleaned = -0.000451646 Jy ! Component: 150 - total flux cleaned = -0.000499569 Jy ! Component: 200 - total flux cleaned = -0.000539434 Jy ! Total flux subtracted in 200 components = -0.000539434 Jy ! Clean residual min=-0.002018 max=0.002446 Jy/beam ! Clean residual mean=-0.000009 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0616971 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.0616971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099571Jy sigma=0.659267 ! Fit after self-cal, rms=0.099575Jy sigma=0.659223 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.2453e-05 Jy ! Component: 100 - total flux cleaned = -0.000120903 Jy ! Component: 150 - total flux cleaned = -0.00016832 Jy ! Component: 200 - total flux cleaned = -0.000194374 Jy ! Total flux subtracted in 200 components = -0.000194374 Jy ! Clean residual min=-0.002030 max=0.002456 Jy/beam ! Clean residual mean=-0.000009 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0615027 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.0615027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099574Jy sigma=0.659282 ! Fit after self-cal, rms=0.099563Jy sigma=0.659260 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=3.532 mas, bpa=15.74 degrees ! Estimated noise=0.27493 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.367 x 3.532 at 15.74 degrees (North through East) ! Clean map min=-0.0017229 max=0.043315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.722 mas, bmaj=2.731 mas, bpa=13.26 degrees ! Estimated noise=0.496224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307258 Jy ! Component: 100 - total flux cleaned = 0.0439323 Jy ! Component: 150 - total flux cleaned = 0.0520747 Jy ! Component: 200 - total flux cleaned = 0.0575196 Jy ! Total flux subtracted in 200 components = 0.0575196 Jy ! Clean residual min=-0.002784 max=0.003415 Jy/beam ! Clean residual mean=-0.000001 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0575196 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0575196 Jy ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=3.532 mas, bpa=15.74 degrees ! Estimated noise=0.27493 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402904 Jy ! Component: 100 - total flux cleaned = 0.00437121 Jy ! Component: 150 - total flux cleaned = 0.00449399 Jy ! Component: 200 - total flux cleaned = 0.00459235 Jy ! Total flux subtracted in 200 components = 0.00459235 Jy ! Clean residual min=-0.001718 max=0.001858 Jy/beam ! Clean residual mean=-0.000004 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0621119 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.062112 Jy ! Inverting map ! Added new window around map position (-14.5, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015603 Jy ! Component: 100 - total flux cleaned = 0.00152164 Jy ! Component: 150 - total flux cleaned = 0.00148464 Jy ! Component: 200 - total flux cleaned = 0.00145141 Jy ! Total flux subtracted in 200 components = 0.00145141 Jy ! Clean residual min=-0.001606 max=0.001692 Jy/beam ! Clean residual mean=-0.000003 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0635634 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0635634 Jy ! Inverting map ! Added new window around map position (13.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108482 Jy ! Component: 100 - total flux cleaned = 0.000866323 Jy ! Component: 150 - total flux cleaned = 0.000801761 Jy ! Component: 200 - total flux cleaned = 0.000740426 Jy ! Total flux subtracted in 200 components = 0.000740426 Jy ! Clean residual min=-0.001555 max=0.001645 Jy/beam ! Clean residual mean=-0.000003 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0643038 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.0643038 Jy ! Inverting map ! Added new window around map position (-2.5, 86.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015746 Jy ! Component: 100 - total flux cleaned = 0.00221925 Jy ! Component: 150 - total flux cleaned = 0.00238899 Jy ! Component: 200 - total flux cleaned = 0.00241523 Jy ! Total flux subtracted in 200 components = 0.00241523 Jy ! Clean residual min=-0.001532 max=0.001460 Jy/beam ! Clean residual mean=-0.000003 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.066719 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 70 components and 0.066719 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.976 mas, bmaj=12.77 mas, bpa=77.82 degrees ! Estimated noise=0.432033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.78642e-05 Jy ! Component: 100 - total flux cleaned = -0.000273263 Jy ! Component: 150 - total flux cleaned = -0.000289865 Jy ! Component: 200 - total flux cleaned = -0.000347801 Jy ! Total flux subtracted in 200 components = -0.000347801 Jy ! Clean residual min=-0.001776 max=0.002266 Jy/beam ! Clean residual mean=-0.000008 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0663712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.89542e-05 Jy ! Component: 100 - total flux cleaned = -5.05086e-05 Jy ! Component: 150 - total flux cleaned = -7.24536e-05 Jy ! Component: 200 - total flux cleaned = -8.24135e-05 Jy ! Total flux subtracted in 200 components = -8.24135e-05 Jy ! Clean residual min=-0.001781 max=0.002264 Jy/beam ! Clean residual mean=-0.000008 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0662888 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 97 components and 0.0662888 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=3.532 mas, bpa=15.74 degrees ! Estimated noise=0.27493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388162 Jy ! Component: 100 - total flux cleaned = 0.000365194 Jy ! Component: 150 - total flux cleaned = 0.000389379 Jy ! Component: 200 - total flux cleaned = 0.000366926 Jy ! Total flux subtracted in 200 components = 0.000366926 Jy ! Clean residual min=-0.001421 max=0.001477 Jy/beam ! Clean residual mean=-0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0666558 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.0666557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.099429Jy sigma=0.658668 ! Fit after self-cal, rms=0.099470Jy sigma=0.658195 wmodel ./J2109+8021_S_map.mod ! Writing 107 model components to file: ./J2109+8021_S_map.mod wobs ./J2109+8021_S_uvs.fits ! Writing UV FITS file: ./J2109+8021_S_uvs.fits wwins ./J2109+8021_S_map.win ! wwins: Wrote 6 windows to ./J2109+8021_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100807 Jy ! Component: 100 - total flux cleaned = 0.000401092 Jy ! Component: 150 - total flux cleaned = 0.00061765 Jy ! Component: 200 - total flux cleaned = 0.000825787 Jy ! Component: 250 - total flux cleaned = 0.0010057 Jy ! Component: 300 - total flux cleaned = 0.00118155 Jy ! Component: 350 - total flux cleaned = 0.00143931 Jy ! Component: 400 - total flux cleaned = 0.00173386 Jy ! Component: 450 - total flux cleaned = 0.00196114 Jy ! Component: 500 - total flux cleaned = 0.00210363 Jy ! Component: 550 - total flux cleaned = 0.00220408 Jy ! Component: 600 - total flux cleaned = 0.00230314 Jy ! Component: 650 - total flux cleaned = 0.00240068 Jy ! Component: 700 - total flux cleaned = 0.00247776 Jy ! Component: 750 - total flux cleaned = 0.00253469 Jy ! Component: 800 - total flux cleaned = 0.00257231 Jy ! Component: 850 - total flux cleaned = 0.00260941 Jy ! Component: 900 - total flux cleaned = 0.00266466 Jy ! Component: 950 - total flux cleaned = 0.0027012 Jy ! Component: 1000 - total flux cleaned = 0.00270158 Jy ! Component: 1050 - total flux cleaned = 0.00277318 Jy ! Component: 1100 - total flux cleaned = 0.00279086 Jy ! Component: 1150 - total flux cleaned = 0.0028086 Jy ! Component: 1200 - total flux cleaned = 0.00282606 Jy ! Component: 1250 - total flux cleaned = 0.00289478 Jy ! Component: 1300 - total flux cleaned = 0.00282626 Jy ! Component: 1350 - total flux cleaned = 0.00291089 Jy ! Component: 1400 - total flux cleaned = 0.00291084 Jy ! Component: 1450 - total flux cleaned = 0.00292764 Jy ! Component: 1500 - total flux cleaned = 0.00302695 Jy ! Component: 1550 - total flux cleaned = 0.00305972 Jy ! Component: 1600 - total flux cleaned = 0.00302713 Jy ! Component: 1650 - total flux cleaned = 0.00305962 Jy ! Component: 1700 - total flux cleaned = 0.00320405 Jy ! Component: 1750 - total flux cleaned = 0.00314029 Jy ! Component: 1800 - total flux cleaned = 0.00326725 Jy ! Component: 1850 - total flux cleaned = 0.00334597 Jy ! Component: 1900 - total flux cleaned = 0.00348671 Jy ! Component: 1950 - total flux cleaned = 0.00354887 Jy ! Component: 2000 - total flux cleaned = 0.00359516 Jy ! Component: 2050 - total flux cleaned = 0.00365666 Jy ! Component: 2100 - total flux cleaned = 0.00380933 Jy ! Component: 2150 - total flux cleaned = 0.00390037 Jy ! Component: 2200 - total flux cleaned = 0.00400584 Jy ! Component: 2250 - total flux cleaned = 0.00408091 Jy ! Component: 2300 - total flux cleaned = 0.00418513 Jy ! Component: 2350 - total flux cleaned = 0.0042297 Jy ! Component: 2400 - total flux cleaned = 0.00436254 Jy ! Component: 2450 - total flux cleaned = 0.00445051 Jy ! Component: 2500 - total flux cleaned = 0.00453801 Jy ! Component: 2550 - total flux cleaned = 0.00462502 Jy ! Component: 2600 - total flux cleaned = 0.00476934 Jy ! Component: 2650 - total flux cleaned = 0.0047837 Jy ! Component: 2700 - total flux cleaned = 0.00489791 Jy ! Component: 2750 - total flux cleaned = 0.00498313 Jy ! Component: 2800 - total flux cleaned = 0.00494074 Jy ! Component: 2850 - total flux cleaned = 0.00505327 Jy ! Component: 2900 - total flux cleaned = 0.00515124 Jy ! Component: 2950 - total flux cleaned = 0.00515125 Jy ! Component: 3000 - total flux cleaned = 0.00524828 Jy ! Component: 3050 - total flux cleaned = 0.00528974 Jy ! Component: 3100 - total flux cleaned = 0.00533094 Jy ! Component: 3150 - total flux cleaned = 0.0053719 Jy ! Component: 3200 - total flux cleaned = 0.00541265 Jy ! Component: 3250 - total flux cleaned = 0.00546683 Jy ! Component: 3300 - total flux cleaned = 0.00548037 Jy ! Component: 3350 - total flux cleaned = 0.0055475 Jy ! Component: 3400 - total flux cleaned = 0.00553412 Jy ! Component: 3450 - total flux cleaned = 0.00565398 Jy ! Component: 3500 - total flux cleaned = 0.00569385 Jy ! Component: 3550 - total flux cleaned = 0.0057731 Jy ! Component: 3600 - total flux cleaned = 0.00577314 Jy ! Component: 3650 - total flux cleaned = 0.00583855 Jy ! Component: 3700 - total flux cleaned = 0.00591686 Jy ! Component: 3750 - total flux cleaned = 0.00586485 Jy ! Component: 3800 - total flux cleaned = 0.00595547 Jy ! Component: 3850 - total flux cleaned = 0.00604559 Jy ! Component: 3900 - total flux cleaned = 0.00604567 Jy ! Component: 3950 - total flux cleaned = 0.00607116 Jy ! Component: 4000 - total flux cleaned = 0.00614752 Jy ! Component: 4050 - total flux cleaned = 0.00614757 Jy ! Total flux subtracted in 4096 components = 0.00617279 Jy ! Clean residual min=-0.000673 max=0.000680 Jy/beam ! Clean residual mean=-0.000003 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0728285 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 465 components and 0.0728285 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "./J2109+8021_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.367 x 3.532 at 15.74 degrees (North through East) ! Clean map min=-0.0015668 max=0.042419 Jy/beam ! Writing clean map to FITS file: ./J2109+8021_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0424186 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237757 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.6815 1.6815 3.36301 6.72601 13.452 26.904 53.8081 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.042 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 178.411 quit ! Quitting program ! Log file ./J2109+8021_S_uvs.log closed on Sat Jan 2 10:01:00 2016