! Started logfile: ./J1819+5511_S_uvs.log on Sat Jan 2 09:59:43 2016 obs J1819+5511_S_uva.fits ! Reading UV FITS file: J1819+5511_S_uva.fits ! AN table 1: 118 integrations on 66 of 66 possible baselines. ! AN table 2: 59 integrations on 55 of 55 possible baselines. ! AN table 3: 59 integrations on 55 of 55 possible baselines. ! AN table 4: 58 integrations on 21 of 21 possible baselines. ! AN table 5: 59 integrations on 66 of 66 possible baselines. ! Apparent sampling: 0.883858 visibilities/baseline/integration-bin. ! Found source: J1819+5511 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 137104 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet ./J1819+5511_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 203 telescope corrections were flagged in sub-array 1. ! A total of 104 telescope corrections were flagged in sub-array 2. ! A total of 100 telescope corrections were flagged in sub-array 3. ! A total of 96 telescope corrections were flagged in sub-array 4. ! A total of 105 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 203 telescope corrections were flagged in sub-array 1. ! A total of 104 telescope corrections were flagged in sub-array 2. ! A total of 100 telescope corrections were flagged in sub-array 3. ! A total of 96 telescope corrections were flagged in sub-array 4. ! A total of 105 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 319 telescope corrections were flagged in sub-array 1. ! A total of 162 telescope corrections were flagged in sub-array 2. ! A total of 100 telescope corrections were flagged in sub-array 3. ! A total of 96 telescope corrections were flagged in sub-array 4. ! A total of 163 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 319 telescope corrections were flagged in sub-array 1. ! A total of 162 telescope corrections were flagged in sub-array 2. ! A total of 100 telescope corrections were flagged in sub-array 3. ! A total of 96 telescope corrections were flagged in sub-array 4. ! A total of 163 telescope corrections were flagged in sub-array 5. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 319 telescope corrections were flagged in sub-array 1. ! A total of 162 telescope corrections were flagged in sub-array 2. ! A total of 158 telescope corrections were flagged in sub-array 3. ! A total of 154 telescope corrections were flagged in sub-array 4. ! A total of 163 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 372 telescope corrections were flagged in sub-array 1. ! A total of 127 telescope corrections were flagged in sub-array 2. ! A total of 185 telescope corrections were flagged in sub-array 3. ! A total of 117 telescope corrections were flagged in sub-array 4. ! A total of 128 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 257 telescope corrections were flagged in sub-array 1. ! A total of 127 telescope corrections were flagged in sub-array 2. ! A total of 185 telescope corrections were flagged in sub-array 3. ! A total of 117 telescope corrections were flagged in sub-array 4. ! A total of 128 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.015311Jy sigma=9.088597 ! Fit after self-cal, rms=0.902494Jy sigma=8.326403 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.723 mas, bmaj=2.615 mas, bpa=-20.94 degrees ! Estimated noise=0.650544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0603008 Jy ! Component: 100 - total flux cleaned = 0.078932 Jy ! Total flux subtracted in 100 components = 0.078932 Jy ! Clean residual min=-0.006010 max=0.008741 Jy/beam ! Clean residual mean=-0.000009 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.078932 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.078932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.152516Jy sigma=0.745900 ! Fit after self-cal, rms=0.152204Jy sigma=0.742292 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115803 Jy ! Component: 100 - total flux cleaned = 0.0198917 Jy ! Total flux subtracted in 100 components = 0.0198917 Jy ! Clean residual min=-0.006001 max=0.008203 Jy/beam ! Clean residual mean=-0.000003 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.0988237 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.0988237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.150144Jy sigma=0.715953 ! Fit after self-cal, rms=0.150155Jy sigma=0.715607 ! Inverting map ! Added new window around map position (-18.5, 9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786285 Jy ! Component: 100 - total flux cleaned = 0.0122779 Jy ! Total flux subtracted in 100 components = 0.0122779 Jy ! Clean residual min=-0.006054 max=0.007477 Jy/beam ! Clean residual mean=-0.000000 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.111102 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.111102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.149630Jy sigma=0.706734 ! Fit after self-cal, rms=0.149558Jy sigma=0.706367 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.625 mas, bpa=-17.61 degrees ! Estimated noise=0.325933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00841231 Jy ! Component: 100 - total flux cleaned = 0.00950902 Jy ! Component: 150 - total flux cleaned = 0.00994673 Jy ! Component: 200 - total flux cleaned = 0.0102192 Jy ! Total flux subtracted in 200 components = 0.0102192 Jy ! Clean residual min=-0.003201 max=0.003963 Jy/beam ! Clean residual mean=0.000018 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.121321 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.121321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148478Jy sigma=0.710580 ! Fit after self-cal, rms=0.148488Jy sigma=0.710514 ! Inverting map ! Added new window around map position (18.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200551 Jy ! Component: 100 - total flux cleaned = 0.00238257 Jy ! Component: 150 - total flux cleaned = 0.00238368 Jy ! Component: 200 - total flux cleaned = 0.00245415 Jy ! Total flux subtracted in 200 components = 0.00245415 Jy ! Clean residual min=-0.003290 max=0.003283 Jy/beam ! Clean residual mean=0.000020 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.123775 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.123775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148379Jy sigma=0.706930 ! Fit after self-cal, rms=0.148312Jy sigma=0.706747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.328 x 3.625 at -17.61 degrees (North through East) ! Clean map min=-0.0026504 max=0.096474 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* LA 1.00* MK 1.00* ! NL 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* LA 1.00* MK 1.00* ! NL 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* LA 1.00* MK 1.00* ! NL 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* LA 1.00* MK 1.00* ! NL 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* LA 1.00* MK 1.00* ! NL 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* LA 1.00* MK 1.00* ! NL 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* LA 1.00* MK 1.00* ! NL 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.148312Jy sigma=0.706747 ! Fit after self-cal, rms=0.148314Jy sigma=0.706751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.625 mas, bpa=-17.6 degrees ! Estimated noise=0.325947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647535 Jy ! Component: 100 - total flux cleaned = 0.000583076 Jy ! Component: 150 - total flux cleaned = 0.000467832 Jy ! Component: 200 - total flux cleaned = 0.00041588 Jy ! Total flux subtracted in 200 components = 0.00041588 Jy ! Clean residual min=-0.003146 max=0.003192 Jy/beam ! Clean residual mean=0.000021 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.124191 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.124191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148260Jy sigma=0.705622 ! Fit after self-cal, rms=0.148236Jy sigma=0.705581 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148236Jy sigma=0.705581 ! Fit after self-cal, rms=0.148236Jy sigma=0.705581 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.625 mas, bpa=-17.6 degrees ! Estimated noise=0.325947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255457 Jy ! Component: 100 - total flux cleaned = 0.000160134 Jy ! Component: 150 - total flux cleaned = 0.00011586 Jy ! Component: 200 - total flux cleaned = 7.41657e-05 Jy ! Total flux subtracted in 200 components = 7.41657e-05 Jy ! Clean residual min=-0.003076 max=0.003120 Jy/beam ! Clean residual mean=0.000021 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.124265 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 57 components and 0.124265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148200Jy sigma=0.705049 ! Fit after self-cal, rms=0.148188Jy sigma=0.705034 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 97). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128605 Jy ! Component: 100 - total flux cleaned = 0.00145686 Jy ! Component: 150 - total flux cleaned = 0.00145349 Jy ! Component: 200 - total flux cleaned = 0.00156856 Jy ! Total flux subtracted in 200 components = 0.00156856 Jy ! Clean residual min=-0.002931 max=0.002953 Jy/beam ! Clean residual mean=0.000023 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.125834 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 69 components and 0.125833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148143Jy sigma=0.702031 ! Fit after self-cal, rms=0.148129Jy sigma=0.701881 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148129Jy sigma=0.701881 ! Fit after self-cal, rms=0.148129Jy sigma=0.701881 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.625 mas, bpa=-17.6 degrees ! Estimated noise=0.325947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376783 Jy ! Component: 100 - total flux cleaned = 0.000431508 Jy ! Component: 150 - total flux cleaned = 0.000483058 Jy ! Component: 200 - total flux cleaned = 0.000529876 Jy ! Total flux subtracted in 200 components = 0.000529876 Jy ! Clean residual min=-0.002804 max=0.002714 Jy/beam ! Clean residual mean=0.000024 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.126363 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.126363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148108Jy sigma=0.700782 ! Fit after self-cal, rms=0.148103Jy sigma=0.700749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145794 Jy ! Component: 100 - total flux cleaned = 0.000188142 Jy ! Component: 150 - total flux cleaned = 0.000187184 Jy ! Component: 200 - total flux cleaned = 0.000187087 Jy ! Total flux subtracted in 200 components = 0.000187087 Jy ! Clean residual min=-0.002733 max=0.002686 Jy/beam ! Clean residual mean=0.000024 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.12655 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 80 components and 0.12655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148078Jy sigma=0.700297 ! Fit after self-cal, rms=0.148071Jy sigma=0.700288 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148071Jy sigma=0.700288 ! Fit after self-cal, rms=0.148071Jy sigma=0.700288 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.531 mas, bmaj=10.61 mas, bpa=41.58 degrees ! Estimated noise=0.437559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000532807 Jy ! Component: 100 - total flux cleaned = -0.000558397 Jy ! Component: 150 - total flux cleaned = -0.000518421 Jy ! Component: 200 - total flux cleaned = -0.000500859 Jy ! Total flux subtracted in 200 components = -0.000500859 Jy ! Clean residual min=-0.002782 max=0.003103 Jy/beam ! Clean residual mean=0.000059 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.12605 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.12605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148078Jy sigma=0.700485 ! Fit after self-cal, rms=0.148066Jy sigma=0.700464 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.42768e-05 Jy ! Component: 100 - total flux cleaned = -4.81682e-05 Jy ! Component: 150 - total flux cleaned = -6.19105e-05 Jy ! Component: 200 - total flux cleaned = -7.50197e-05 Jy ! Total flux subtracted in 200 components = -7.50197e-05 Jy ! Clean residual min=-0.002782 max=0.003068 Jy/beam ! Clean residual mean=0.000058 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.125975 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 101 components and 0.125975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.148070Jy sigma=0.700467 ! Fit after self-cal, rms=0.148067Jy sigma=0.700465 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.625 mas, bpa=-17.6 degrees ! Estimated noise=0.325947 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.328 x 3.625 at -17.6 degrees (North through East) ! Clean map min=-0.0026524 max=0.096752 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.723 mas, bmaj=2.615 mas, bpa=-20.93 degrees ! Estimated noise=0.651418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0601319 Jy ! Component: 100 - total flux cleaned = 0.0795052 Jy ! Component: 150 - total flux cleaned = 0.0916996 Jy ! Component: 200 - total flux cleaned = 0.101429 Jy ! Total flux subtracted in 200 components = 0.101429 Jy ! Clean residual min=-0.005795 max=0.006243 Jy/beam ! Clean residual mean=-0.000003 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.101429 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.101429 Jy ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.625 mas, bpa=-17.6 degrees ! Estimated noise=0.325947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147253 Jy ! Component: 100 - total flux cleaned = 0.0201886 Jy ! Component: 150 - total flux cleaned = 0.0212726 Jy ! Component: 200 - total flux cleaned = 0.0218188 Jy ! Total flux subtracted in 200 components = 0.0218188 Jy ! Clean residual min=-0.002898 max=0.003199 Jy/beam ! Clean residual mean=0.000019 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.123248 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.123248 Jy ! Inverting map ! Added new window around map position (15, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122642 Jy ! Component: 100 - total flux cleaned = 0.00146044 Jy ! Component: 150 - total flux cleaned = 0.00188502 Jy ! Component: 200 - total flux cleaned = 0.00207825 Jy ! Total flux subtracted in 200 components = 0.00207825 Jy ! Clean residual min=-0.002659 max=0.003017 Jy/beam ! Clean residual mean=0.000021 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.125326 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 53 components and 0.125326 Jy ! Inverting map ! Added new window around map position (-15, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102184 Jy ! Component: 100 - total flux cleaned = 0.0012926 Jy ! Component: 150 - total flux cleaned = 0.0014613 Jy ! Component: 200 - total flux cleaned = 0.00161801 Jy ! Total flux subtracted in 200 components = 0.00161801 Jy ! Clean residual min=-0.002661 max=0.002745 Jy/beam ! Clean residual mean=0.000023 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.126944 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 63 components and 0.126944 Jy ! Inverting map ! Added new window around map position (17.5, -41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.91749e-05 Jy ! Component: 100 - total flux cleaned = -0.00016578 Jy ! Component: 150 - total flux cleaned = -0.000255053 Jy ! Component: 200 - total flux cleaned = -0.000413419 Jy ! Total flux subtracted in 200 components = -0.000413419 Jy ! Clean residual min=-0.002442 max=0.002668 Jy/beam ! Clean residual mean=0.000022 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.126531 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 83 components and 0.126531 Jy ! Inverting map ! Added new window around map position (78, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264765 Jy ! Component: 100 - total flux cleaned = 0.00363045 Jy ! Component: 150 - total flux cleaned = 0.00384026 Jy ! Component: 200 - total flux cleaned = 0.00397518 Jy ! Total flux subtracted in 200 components = 0.00397518 Jy ! Clean residual min=-0.002529 max=0.002551 Jy/beam ! Clean residual mean=0.000018 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.130506 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 100 components and 0.130506 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.531 mas, bmaj=10.61 mas, bpa=41.58 degrees ! Estimated noise=0.437559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120526 Jy ! Component: 100 - total flux cleaned = 0.00186145 Jy ! Component: 150 - total flux cleaned = 0.00238077 Jy ! Component: 200 - total flux cleaned = 0.00273721 Jy ! Total flux subtracted in 200 components = 0.00273721 Jy ! Clean residual min=-0.002620 max=0.003025 Jy/beam ! Clean residual mean=0.000045 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.133243 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262569 Jy ! Component: 100 - total flux cleaned = 0.000370712 Jy ! Component: 150 - total flux cleaned = 0.000471281 Jy ! Component: 200 - total flux cleaned = 0.000566786 Jy ! Total flux subtracted in 200 components = 0.000566786 Jy ! Clean residual min=-0.002542 max=0.003031 Jy/beam ! Clean residual mean=0.000045 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.13381 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 131 components and 0.13381 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=3.625 mas, bpa=-17.6 degrees ! Estimated noise=0.325947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153662 Jy ! Component: 100 - total flux cleaned = 0.000217864 Jy ! Component: 150 - total flux cleaned = 0.000221163 Jy ! Component: 200 - total flux cleaned = 0.000223074 Jy ! Total flux subtracted in 200 components = 0.000223074 Jy ! Clean residual min=-0.002538 max=0.002476 Jy/beam ! Clean residual mean=0.000018 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.134033 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 143 components and 0.134033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.147711Jy sigma=0.698006 ! Fit after self-cal, rms=0.147632Jy sigma=0.697622 wmodel ./J1819+5511_S_map.mod ! Writing 143 model components to file: ./J1819+5511_S_map.mod wobs ./J1819+5511_S_uvs.fits ! Writing UV FITS file: ./J1819+5511_S_uvs.fits wwins ./J1819+5511_S_map.win ! wwins: Wrote 8 windows to ./J1819+5511_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037377 Jy ! Component: 100 - total flux cleaned = 0.0010026 Jy ! Component: 150 - total flux cleaned = 0.00157086 Jy ! Component: 200 - total flux cleaned = 0.00204053 Jy ! Component: 250 - total flux cleaned = 0.00237467 Jy ! Component: 300 - total flux cleaned = 0.00274246 Jy ! Component: 350 - total flux cleaned = 0.00298332 Jy ! Component: 400 - total flux cleaned = 0.00333908 Jy ! Component: 450 - total flux cleaned = 0.00365008 Jy ! Component: 500 - total flux cleaned = 0.00387999 Jy ! Component: 550 - total flux cleaned = 0.00414462 Jy ! Component: 600 - total flux cleaned = 0.0043686 Jy ! Component: 650 - total flux cleaned = 0.00459012 Jy ! Component: 700 - total flux cleaned = 0.0048091 Jy ! Component: 750 - total flux cleaned = 0.00506197 Jy ! Component: 800 - total flux cleaned = 0.00534747 Jy ! Component: 850 - total flux cleaned = 0.00548854 Jy ! Component: 900 - total flux cleaned = 0.00573282 Jy ! Component: 950 - total flux cleaned = 0.00583718 Jy ! Component: 1000 - total flux cleaned = 0.00611193 Jy ! Component: 1050 - total flux cleaned = 0.00641714 Jy ! Component: 1100 - total flux cleaned = 0.00651781 Jy ! Component: 1150 - total flux cleaned = 0.00675173 Jy ! Component: 1200 - total flux cleaned = 0.00698299 Jy ! Component: 1250 - total flux cleaned = 0.00727799 Jy ! Component: 1300 - total flux cleaned = 0.00750512 Jy ! Component: 1350 - total flux cleaned = 0.0076665 Jy ! Component: 1400 - total flux cleaned = 0.00798608 Jy ! Component: 1450 - total flux cleaned = 0.00827228 Jy ! Component: 1500 - total flux cleaned = 0.00846124 Jy ! Component: 1550 - total flux cleaned = 0.00880544 Jy ! Component: 1600 - total flux cleaned = 0.00905412 Jy ! Component: 1650 - total flux cleaned = 0.0093319 Jy ! Component: 1700 - total flux cleaned = 0.00948483 Jy ! Component: 1750 - total flux cleaned = 0.00981987 Jy ! Component: 1800 - total flux cleaned = 0.0101223 Jy ! Component: 1850 - total flux cleaned = 0.0103929 Jy ! Component: 1900 - total flux cleaned = 0.0106913 Jy ! Component: 1950 - total flux cleaned = 0.0109288 Jy ! Component: 2000 - total flux cleaned = 0.0111942 Jy ! Component: 2050 - total flux cleaned = 0.0113998 Jy ! Component: 2100 - total flux cleaned = 0.0116915 Jy ! Component: 2150 - total flux cleaned = 0.0119525 Jy ! Component: 2200 - total flux cleaned = 0.0121834 Jy ! Component: 2250 - total flux cleaned = 0.0124699 Jy ! Component: 2300 - total flux cleaned = 0.0127838 Jy ! Component: 2350 - total flux cleaned = 0.0132094 Jy ! Component: 2400 - total flux cleaned = 0.0133505 Jy ! Component: 2450 - total flux cleaned = 0.0136031 Jy ! Component: 2500 - total flux cleaned = 0.0137985 Jy ! Component: 2550 - total flux cleaned = 0.0141875 Jy ! Component: 2600 - total flux cleaned = 0.0145191 Jy ! Component: 2650 - total flux cleaned = 0.0147116 Jy ! Component: 2700 - total flux cleaned = 0.0149033 Jy ! Component: 2750 - total flux cleaned = 0.0151485 Jy ! Component: 2800 - total flux cleaned = 0.0151757 Jy ! Component: 2850 - total flux cleaned = 0.0155 Jy ! Component: 2900 - total flux cleaned = 0.0157419 Jy ! Component: 2950 - total flux cleaned = 0.0160096 Jy ! Component: 3000 - total flux cleaned = 0.0161431 Jy ! Component: 3050 - total flux cleaned = 0.0163288 Jy ! Component: 3100 - total flux cleaned = 0.0164872 Jy ! Component: 3150 - total flux cleaned = 0.0166189 Jy ! Component: 3200 - total flux cleaned = 0.0169073 Jy ! Component: 3250 - total flux cleaned = 0.0170118 Jy ! Component: 3300 - total flux cleaned = 0.0171419 Jy ! Component: 3350 - total flux cleaned = 0.0172715 Jy ! Component: 3400 - total flux cleaned = 0.0174005 Jy ! Component: 3450 - total flux cleaned = 0.0174521 Jy ! Component: 3500 - total flux cleaned = 0.0176313 Jy ! Component: 3550 - total flux cleaned = 0.0178862 Jy ! Component: 3600 - total flux cleaned = 0.0179878 Jy ! Component: 3650 - total flux cleaned = 0.0181395 Jy ! Component: 3700 - total flux cleaned = 0.018215 Jy ! Component: 3750 - total flux cleaned = 0.0184659 Jy ! Component: 3800 - total flux cleaned = 0.0183908 Jy ! Component: 3850 - total flux cleaned = 0.0186399 Jy ! Component: 3900 - total flux cleaned = 0.0185654 Jy ! Component: 3950 - total flux cleaned = 0.0187137 Jy ! Component: 4000 - total flux cleaned = 0.0189352 Jy ! Component: 4050 - total flux cleaned = 0.0189108 Jy ! Total flux subtracted in 4096 components = 0.019131 Jy ! Clean residual min=-0.001242 max=0.001228 Jy/beam ! Clean residual mean=0.000009 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.153164 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 499 components and 0.153164 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "./J1819+5511_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.328 x 3.625 at -17.6 degrees (North through East) ! Clean map min=-0.0021769 max=0.097981 Jy/beam ! Writing clean map to FITS file: ./J1819+5511_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.097981 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00042194 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2919 1.2919 2.58381 5.16761 10.3352 20.6704 41.3409 82.6818 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 232.215 quit ! Quitting program ! Log file ./J1819+5511_S_uvs.log closed on Sat Jan 2 09:59:52 2016