! Started logfile: /scr/pima/gb073_uvs/J1608+1029_X_uvs.log on Sat Dec 26 09:42:09 2015 obs /scr/pima/gb073_uvs/J1608+1029_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1608+1029_X_uva.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! AN table 2: 12 integrations on 10 of 10 possible baselines. ! AN table 3: 6 integrations on 55 of 55 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1608+1029 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5400 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1608+1029_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.251479Jy sigma=10.844953 ! Fit after self-cal, rms=0.364986Jy sigma=2.558294 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.5224 mas, bmaj=1 mas, bpa=-5.994 degrees ! Estimated noise=2.09859 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.535281 Jy ! Component: 100 - total flux cleaned = 0.687036 Jy ! Total flux subtracted in 100 components = 0.687036 Jy ! Clean residual min=-0.034115 max=0.083497 Jy/beam ! Clean residual mean=0.000181 rms=0.009363 Jy/beam ! Combined flux in latest and established models = 0.687036 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.687036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.234571Jy sigma=1.918789 ! Fit after self-cal, rms=0.234201Jy sigma=1.917205 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Added new window around map position (-0.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0881289 Jy ! Component: 100 - total flux cleaned = 0.141608 Jy ! Total flux subtracted in 100 components = 0.141608 Jy ! Clean residual min=-0.029515 max=0.045966 Jy/beam ! Clean residual mean=0.000091 rms=0.006194 Jy/beam ! Combined flux in latest and established models = 0.828644 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.828644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.191633Jy sigma=1.384987 ! Fit after self-cal, rms=0.189913Jy sigma=1.370210 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Added new window around map position (-1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0426775 Jy ! Component: 100 - total flux cleaned = 0.0681379 Jy ! Total flux subtracted in 100 components = 0.0681379 Jy ! Clean residual min=-0.027467 max=0.034036 Jy/beam ! Clean residual mean=0.000049 rms=0.005096 Jy/beam ! Combined flux in latest and established models = 0.896782 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.896782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.176159Jy sigma=1.209916 ! Fit after self-cal, rms=0.175023Jy sigma=1.197273 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.638 mas, bmaj=1.142 mas, bpa=-5.913 degrees ! Estimated noise=1.44706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357472 Jy ! Component: 100 - total flux cleaned = 0.054951 Jy ! Component: 150 - total flux cleaned = 0.0668607 Jy ! Component: 200 - total flux cleaned = 0.0726455 Jy ! Total flux subtracted in 200 components = 0.0726455 Jy ! Clean residual min=-0.023870 max=0.022071 Jy/beam ! Clean residual mean=0.000031 rms=0.004392 Jy/beam ! Combined flux in latest and established models = 0.969428 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.969428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.166992Jy sigma=1.122283 ! Fit after self-cal, rms=0.165781Jy sigma=1.109204 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.638 x 1.142 at -5.913 degrees (North through East) ! Clean map min=-0.017766 max=0.67219 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 EF 1.00* FD 0.97 KP 0.96 ! LA 1.03 MC 0.91 NL 0.98 OV 1.03 ! PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 0.95 MC 0.97 ON 1.05 ! ZC 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 EF 1.00* FD 1.03 KP 1.00 ! LA 1.04 MC 0.99 NL 1.01 OV 1.04 ! PT 1.01 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.01 MC 1.03 ON 1.04 ! ZC 0.85 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 EF 1.00* FD 0.99 KP 0.94 ! LA 0.98 MC 0.94 NL 1.00 OV 1.01 ! PT 1.00 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 EF 1.00* FD 1.01 KP 0.96 ! LA 1.01 MC 0.95 NL 1.03 OV 1.02 ! PT 1.03 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 0.99 MC 0.99 ON 1.06 ! ZC 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.01 KP 0.87 ! LA 1.02 MC 1.19 NL 1.03 OV 1.06 ! PT 0.95 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.165781Jy sigma=1.109204 ! Fit after self-cal, rms=0.162847Jy sigma=1.076923 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.6383 mas, bmaj=1.138 mas, bpa=-5.976 degrees ! Estimated noise=1.4361 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933738 Jy ! Component: 100 - total flux cleaned = 0.0102736 Jy ! Component: 150 - total flux cleaned = 0.0107829 Jy ! Component: 200 - total flux cleaned = 0.0105508 Jy ! Total flux subtracted in 200 components = 0.0105508 Jy ! Clean residual min=-0.021600 max=0.018547 Jy/beam ! Clean residual mean=0.000014 rms=0.003769 Jy/beam ! Combined flux in latest and established models = 0.979978 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.979978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160763Jy sigma=1.063107 ! Fit after self-cal, rms=0.160675Jy sigma=1.061406 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160675Jy sigma=1.061406 ! Fit after self-cal, rms=0.160078Jy sigma=1.058819 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.6384 mas, bmaj=1.136 mas, bpa=-5.981 degrees ! Estimated noise=1.43458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402603 Jy ! Component: 100 - total flux cleaned = 0.00472687 Jy ! Component: 150 - total flux cleaned = 0.00472376 Jy ! Component: 200 - total flux cleaned = 0.00435906 Jy ! Total flux subtracted in 200 components = 0.00435906 Jy ! Clean residual min=-0.021612 max=0.017435 Jy/beam ! Clean residual mean=0.000012 rms=0.003699 Jy/beam ! Combined flux in latest and established models = 0.984337 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 0.984337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.158732Jy sigma=1.050069 ! Fit after self-cal, rms=0.158680Jy sigma=1.049280 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220402 Jy ! Component: 100 - total flux cleaned = 0.00184055 Jy ! Component: 150 - total flux cleaned = 0.00168094 Jy ! Component: 200 - total flux cleaned = 0.00151997 Jy ! Total flux subtracted in 200 components = 0.00151997 Jy ! Clean residual min=-0.021517 max=0.017049 Jy/beam ! Clean residual mean=0.000012 rms=0.003668 Jy/beam ! Combined flux in latest and established models = 0.985857 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.985857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.157800Jy sigma=1.043744 ! Fit after self-cal, rms=0.157786Jy sigma=1.043431 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.157786Jy sigma=1.043431 ! Fit after self-cal, rms=0.157666Jy sigma=1.043074 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.6387 mas, bmaj=1.136 mas, bpa=-5.975 degrees ! Estimated noise=1.43314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126556 Jy ! Component: 100 - total flux cleaned = 0.00110723 Jy ! Component: 150 - total flux cleaned = 0.000950202 Jy ! Component: 200 - total flux cleaned = 0.000807029 Jy ! Total flux subtracted in 200 components = 0.000807029 Jy ! Clean residual min=-0.021192 max=0.016660 Jy/beam ! Clean residual mean=0.000011 rms=0.003646 Jy/beam ! Combined flux in latest and established models = 0.986664 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.986664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.156886Jy sigma=1.038196 ! Fit after self-cal, rms=0.156881Jy sigma=1.037993 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000898239 Jy ! Component: 100 - total flux cleaned = 0.000758835 Jy ! Component: 150 - total flux cleaned = 0.000761486 Jy ! Component: 200 - total flux cleaned = 0.000760836 Jy ! Total flux subtracted in 200 components = 0.000760836 Jy ! Clean residual min=-0.021172 max=0.016432 Jy/beam ! Clean residual mean=0.000011 rms=0.003631 Jy/beam ! Combined flux in latest and established models = 0.987425 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 0.987425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.156325Jy sigma=1.034410 ! Fit after self-cal, rms=0.156330Jy sigma=1.034311 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.156330Jy sigma=1.034311 ! Fit after self-cal, rms=0.156290Jy sigma=1.034202 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=2.816 mas, bmaj=3.047 mas, bpa=-15.67 degrees ! Estimated noise=1.71548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179857 Jy ! Component: 100 - total flux cleaned = -0.00165215 Jy ! Component: 150 - total flux cleaned = -0.00165836 Jy ! Component: 200 - total flux cleaned = -0.00177223 Jy ! Total flux subtracted in 200 components = -0.00177223 Jy ! Clean residual min=-0.019388 max=0.015604 Jy/beam ! Clean residual mean=0.000028 rms=0.004638 Jy/beam ! Combined flux in latest and established models = 0.985653 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.985653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.155758Jy sigma=1.030684 ! Fit after self-cal, rms=0.155739Jy sigma=1.030408 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191926 Jy ! Component: 100 - total flux cleaned = 0.000416428 Jy ! Component: 150 - total flux cleaned = 0.000416841 Jy ! Component: 200 - total flux cleaned = 0.000316216 Jy ! Total flux subtracted in 200 components = 0.000316216 Jy ! Clean residual min=-0.019304 max=0.015818 Jy/beam ! Clean residual mean=0.000028 rms=0.004625 Jy/beam ! Combined flux in latest and established models = 0.985969 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.985969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.155432Jy sigma=1.028434 ! Fit after self-cal, rms=0.155421Jy sigma=1.028246 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.639 mas, bmaj=1.136 mas, bpa=-5.974 degrees ! Estimated noise=1.43241 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.639 x 1.136 at -5.974 degrees (North through East) ! Clean map min=-0.016377 max=0.66047 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.155421Jy sigma=1.028246 ! Fit after self-cal, rms=0.154263Jy sigma=1.017172 ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.6404 mas, bmaj=1.134 mas, bpa=-5.967 degrees ! Estimated noise=1.43171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000381821 Jy ! Component: 100 - total flux cleaned = 0.00037117 Jy ! Component: 150 - total flux cleaned = 0.000227043 Jy ! Component: 200 - total flux cleaned = 0.000227351 Jy ! Total flux subtracted in 200 components = 0.000227351 Jy ! Clean residual min=-0.020565 max=0.015418 Jy/beam ! Clean residual mean=0.000010 rms=0.003558 Jy/beam ! Combined flux in latest and established models = 0.986196 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.986196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154022Jy sigma=1.015860 ! Fit after self-cal, rms=0.154027Jy sigma=1.015746 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.64339e-06 Jy ! Component: 100 - total flux cleaned = -0.000143777 Jy ! Component: 150 - total flux cleaned = -0.000270815 Jy ! Component: 200 - total flux cleaned = -0.000396583 Jy ! Total flux subtracted in 200 components = -0.000396583 Jy ! Clean residual min=-0.020418 max=0.015489 Jy/beam ! Clean residual mean=0.000010 rms=0.003547 Jy/beam ! Combined flux in latest and established models = 0.9858 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.9858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153723Jy sigma=1.014025 ! Fit after self-cal, rms=0.153728Jy sigma=1.013960 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153728Jy sigma=1.013960 ! Fit after self-cal, rms=0.153751Jy sigma=1.013925 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.5239 mas, bmaj=0.9932 mas, bpa=-6.026 degrees ! Estimated noise=2.07731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.527652 Jy ! Component: 100 - total flux cleaned = 0.68708 Jy ! Component: 150 - total flux cleaned = 0.780446 Jy ! Component: 200 - total flux cleaned = 0.840204 Jy ! Total flux subtracted in 200 components = 0.840204 Jy ! Clean residual min=-0.025721 max=0.036511 Jy/beam ! Clean residual mean=0.000076 rms=0.005534 Jy/beam ! Combined flux in latest and established models = 0.840204 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.840204 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.6402 mas, bmaj=1.135 mas, bpa=-5.977 degrees ! Estimated noise=1.43241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574846 Jy ! Component: 100 - total flux cleaned = 0.0913482 Jy ! Component: 150 - total flux cleaned = 0.112594 Jy ! Component: 200 - total flux cleaned = 0.126368 Jy ! Total flux subtracted in 200 components = 0.126368 Jy ! Clean residual min=-0.020729 max=0.016639 Jy/beam ! Clean residual mean=0.000018 rms=0.003723 Jy/beam ! Combined flux in latest and established models = 0.966572 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.966571 Jy ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=2.816 mas, bmaj=3.046 mas, bpa=-15.54 degrees ! Estimated noise=1.71387 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012477 Jy ! Component: 100 - total flux cleaned = 0.0142884 Jy ! Component: 150 - total flux cleaned = 0.0154886 Jy ! Component: 200 - total flux cleaned = 0.0164569 Jy ! Total flux subtracted in 200 components = 0.0164569 Jy ! Clean residual min=-0.018489 max=0.016078 Jy/beam ! Clean residual mean=0.000030 rms=0.004540 Jy/beam ! Combined flux in latest and established models = 0.983028 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175372 Jy ! Component: 100 - total flux cleaned = 0.000491656 Jy ! Component: 150 - total flux cleaned = 0.000774639 Jy ! Component: 200 - total flux cleaned = 0.00103156 Jy ! Total flux subtracted in 200 components = 0.00103156 Jy ! Clean residual min=-0.018311 max=0.016177 Jy/beam ! Clean residual mean=0.000029 rms=0.004518 Jy/beam ! Combined flux in latest and established models = 0.98406 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.98406 Jy ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! Estimated beam: bmin=0.6402 mas, bmaj=1.135 mas, bpa=-5.977 degrees ! Estimated noise=1.43241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240209 Jy ! Component: 100 - total flux cleaned = -0.00211607 Jy ! Component: 150 - total flux cleaned = -0.00237961 Jy ! Component: 200 - total flux cleaned = -0.00214376 Jy ! Total flux subtracted in 200 components = -0.00214376 Jy ! Clean residual min=-0.020067 max=0.015512 Jy/beam ! Clean residual mean=0.000013 rms=0.003611 Jy/beam ! Combined flux in latest and established models = 0.981916 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.981916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153857Jy sigma=1.015254 ! Fit after self-cal, rms=0.153797Jy sigma=1.014275 wmodel /scr/pima/gb073_uvs/J1608+1029_X_map.mod ! Writing 66 model components to file: /scr/pima/gb073_uvs/J1608+1029_X_map.mod wobs /scr/pima/gb073_uvs/J1608+1029_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1608+1029_X_uvs.fits wwins /scr/pima/gb073_uvs/J1608+1029_X_map.win ! wwins: Wrote 5 windows to /scr/pima/gb073_uvs/J1608+1029_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00872525 Jy ! Component: 100 - total flux cleaned = -0.0148519 Jy ! Component: 150 - total flux cleaned = -0.0185662 Jy ! Component: 200 - total flux cleaned = -0.0212883 Jy ! Component: 250 - total flux cleaned = -0.0231174 Jy ! Component: 300 - total flux cleaned = -0.0236249 Jy ! Component: 350 - total flux cleaned = -0.0243619 Jy ! Component: 400 - total flux cleaned = -0.0250829 Jy ! Component: 450 - total flux cleaned = -0.0253217 Jy ! Component: 500 - total flux cleaned = -0.0260115 Jy ! Component: 550 - total flux cleaned = -0.0262342 Jy ! Component: 600 - total flux cleaned = -0.0264476 Jy ! Component: 650 - total flux cleaned = -0.0260209 Jy ! Component: 700 - total flux cleaned = -0.0268622 Jy ! Component: 750 - total flux cleaned = -0.0270665 Jy ! Component: 800 - total flux cleaned = -0.0280744 Jy ! Component: 850 - total flux cleaned = -0.0288642 Jy ! Component: 900 - total flux cleaned = -0.0292475 Jy ! Component: 950 - total flux cleaned = -0.0296259 Jy ! Component: 1000 - total flux cleaned = -0.0294369 Jy ! Component: 1050 - total flux cleaned = -0.0299919 Jy ! Component: 1100 - total flux cleaned = -0.0299908 Jy ! Component: 1150 - total flux cleaned = -0.029814 Jy ! Component: 1200 - total flux cleaned = -0.029462 Jy ! Component: 1250 - total flux cleaned = -0.0298133 Jy ! Component: 1300 - total flux cleaned = -0.0298142 Jy ! Component: 1350 - total flux cleaned = -0.0299797 Jy ! Component: 1400 - total flux cleaned = -0.030645 Jy ! Component: 1450 - total flux cleaned = -0.0309696 Jy ! Component: 1500 - total flux cleaned = -0.0311314 Jy ! Component: 1550 - total flux cleaned = -0.0317785 Jy ! Component: 1600 - total flux cleaned = -0.0322537 Jy ! Component: 1650 - total flux cleaned = -0.0327271 Jy ! Component: 1700 - total flux cleaned = -0.0336537 Jy ! Component: 1750 - total flux cleaned = -0.0341093 Jy ! Component: 1800 - total flux cleaned = -0.0341068 Jy ! Component: 1850 - total flux cleaned = -0.0338103 Jy ! Component: 1900 - total flux cleaned = -0.0338122 Jy ! Component: 1950 - total flux cleaned = -0.0345411 Jy ! Component: 2000 - total flux cleaned = -0.0346834 Jy ! Component: 2050 - total flux cleaned = -0.0349706 Jy ! Component: 2100 - total flux cleaned = -0.0352532 Jy ! Component: 2150 - total flux cleaned = -0.0351133 Jy ! Component: 2200 - total flux cleaned = -0.0349774 Jy ! Component: 2250 - total flux cleaned = -0.035526 Jy ! Component: 2300 - total flux cleaned = -0.0357981 Jy ! Component: 2350 - total flux cleaned = -0.0360662 Jy ! Component: 2400 - total flux cleaned = -0.0360648 Jy ! Component: 2450 - total flux cleaned = -0.0367204 Jy ! Component: 2500 - total flux cleaned = -0.0359407 Jy ! Component: 2550 - total flux cleaned = -0.0364545 Jy ! Component: 2600 - total flux cleaned = -0.0370907 Jy ! Component: 2650 - total flux cleaned = -0.0370896 Jy ! Component: 2700 - total flux cleaned = -0.0369659 Jy ! Component: 2750 - total flux cleaned = -0.0370909 Jy ! Component: 2800 - total flux cleaned = -0.0372151 Jy ! Component: 2850 - total flux cleaned = -0.0380625 Jy ! Component: 2900 - total flux cleaned = -0.0379402 Jy ! Component: 2950 - total flux cleaned = -0.0378209 Jy ! Component: 3000 - total flux cleaned = -0.0381731 Jy ! Component: 3050 - total flux cleaned = -0.0384049 Jy ! Component: 3100 - total flux cleaned = -0.0387524 Jy ! Component: 3150 - total flux cleaned = -0.03875 Jy ! Component: 3200 - total flux cleaned = -0.0384103 Jy ! Component: 3250 - total flux cleaned = -0.0390853 Jy ! Component: 3300 - total flux cleaned = -0.0398645 Jy ! Component: 3350 - total flux cleaned = -0.039642 Jy ! Component: 3400 - total flux cleaned = -0.0395323 Jy ! Component: 3450 - total flux cleaned = -0.0398569 Jy ! Component: 3500 - total flux cleaned = -0.0400712 Jy ! Component: 3550 - total flux cleaned = -0.0400699 Jy ! Component: 3600 - total flux cleaned = -0.0401776 Jy ! Component: 3650 - total flux cleaned = -0.0404908 Jy ! Component: 3700 - total flux cleaned = -0.0408015 Jy ! Component: 3750 - total flux cleaned = -0.0410076 Jy ! Component: 3800 - total flux cleaned = -0.0409047 Jy ! Component: 3850 - total flux cleaned = -0.0413103 Jy ! Component: 3900 - total flux cleaned = -0.0412093 Jy ! Component: 3950 - total flux cleaned = -0.0413074 Jy ! Component: 4000 - total flux cleaned = -0.0409143 Jy ! Component: 4050 - total flux cleaned = -0.0415978 Jy ! Total flux subtracted in 4096 components = -0.0416947 Jy ! Clean residual min=-0.005384 max=0.004831 Jy/beam ! Clean residual mean=-0.000002 rms=0.001568 Jy/beam ! Combined flux in latest and established models = 0.940222 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 342 components and 0.940221 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1608+1029_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6402 x 1.135 at -5.977 degrees (North through East) ! Clean map min=-0.011568 max=0.6552 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1608+1029_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.655195 invert ! Inverting map ! Your choice of large map pixels excluded 6.12% of the data. ! The x-axis pixel size should ideally be below 0.1768 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00155705 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.712942 0.712942 1.42588 2.85177 5.70353 11.4071 22.8141 45.6283 91.2565 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.655 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 420.791 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1608+1029_X_uvs.log closed on Sat Dec 26 09:42:13 2015