! Started logfile: ./J1520+1601_S_uvs.log on Sat Jan 2 09:57:01 2016 obs J1520+1601_S_uva.fits ! Reading UV FITS file: J1520+1601_S_uva.fits ! AN table 1: 59 integrations on 3 of 3 possible baselines. ! AN table 2: 58 integrations on 55 of 55 possible baselines. ! AN table 3: 58 integrations on 21 of 21 possible baselines. ! AN table 4: 59 integrations on 10 of 10 possible baselines. ! AN table 5: 59 integrations on 55 of 55 possible baselines. ! AN table 6: 59 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.783626 visibilities/baseline/integration-bin. ! Found source: J1520+1601 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 73128 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet ./J1520+1601_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 177 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 124 telescope corrections were flagged in sub-array 4. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 100 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 177 telescope corrections were flagged in sub-array 1. ! A total of 43 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 124 telescope corrections were flagged in sub-array 4. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 100 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 177 telescope corrections were flagged in sub-array 1. ! A total of 101 telescope corrections were flagged in sub-array 2. ! A total of 64 telescope corrections were flagged in sub-array 3. ! A total of 124 telescope corrections were flagged in sub-array 4. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 100 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! A total of 101 telescope corrections were flagged in sub-array 2. ! A total of 64 telescope corrections were flagged in sub-array 3. ! A total of 124 telescope corrections were flagged in sub-array 4. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 100 telescope corrections were flagged in sub-array 6. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 177 telescope corrections were flagged in sub-array 1. ! A total of 101 telescope corrections were flagged in sub-array 2. ! A total of 64 telescope corrections were flagged in sub-array 3. ! A total of 124 telescope corrections were flagged in sub-array 4. ! A total of 165 telescope corrections were flagged in sub-array 5. ! A total of 159 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 177 telescope corrections were flagged in sub-array 1. ! A total of 116 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 295 telescope corrections were flagged in sub-array 4. ! A total of 185 telescope corrections were flagged in sub-array 5. ! A total of 191 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 177 telescope corrections were flagged in sub-array 1. ! A total of 59 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 124 telescope corrections were flagged in sub-array 4. ! A total of 185 telescope corrections were flagged in sub-array 5. ! A total of 191 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.023193Jy sigma=7.208684 ! Fit after self-cal, rms=0.893219Jy sigma=6.425819 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.56 mas, bmaj=3.143 mas, bpa=4.309 degrees ! Estimated noise=1.07086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728043 Jy ! Component: 100 - total flux cleaned = 0.0956677 Jy ! Total flux subtracted in 100 components = 0.0956677 Jy ! Clean residual min=-0.008611 max=0.011688 Jy/beam ! Clean residual mean=-0.000043 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.0956676 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0956676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.176479Jy sigma=0.775083 ! Fit after self-cal, rms=0.175834Jy sigma=0.771414 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139447 Jy ! Component: 100 - total flux cleaned = 0.0217885 Jy ! Total flux subtracted in 100 components = 0.0217885 Jy ! Clean residual min=-0.009371 max=0.010559 Jy/beam ! Clean residual mean=-0.000027 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.117456 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.117456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.173478Jy sigma=0.751051 ! Fit after self-cal, rms=0.173367Jy sigma=0.750704 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.19 mas, bmaj=4.048 mas, bpa=9.928 degrees ! Estimated noise=0.512485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010924 Jy ! Component: 100 - total flux cleaned = 0.0139339 Jy ! Component: 150 - total flux cleaned = 0.0143527 Jy ! Component: 200 - total flux cleaned = 0.0144739 Jy ! Total flux subtracted in 200 components = 0.0144739 Jy ! Clean residual min=-0.004023 max=0.007650 Jy/beam ! Clean residual mean=-0.000033 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.13193 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.13193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.172103Jy sigma=0.752627 ! Fit after self-cal, rms=0.172114Jy sigma=0.752593 ! Inverting map ! Added new window around map position (-12.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704107 Jy ! Component: 100 - total flux cleaned = 0.00896339 Jy ! Component: 150 - total flux cleaned = 0.00917127 Jy ! Component: 200 - total flux cleaned = 0.00925724 Jy ! Total flux subtracted in 200 components = 0.00925724 Jy ! Clean residual min=-0.003488 max=0.004971 Jy/beam ! Clean residual mean=-0.000018 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.141187 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 28 components and 0.141187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.171781Jy sigma=0.748869 ! Fit after self-cal, rms=0.171769Jy sigma=0.748354 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.19 x 4.048 at 9.928 degrees (North through East) ! Clean map min=-0.0031912 max=0.11419 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.03 KP 1.00 LA 0.99 ! MK 1.03 OV 0.96 PT 1.02 ! ! A total of 171 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.00 KP 0.98 LA 1.15 ! MK 0.93 OV 0.96 PT 0.99 ! ! A total of 171 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.08 KP 0.93 LA 0.99 ! MK 1.08 OV 1.00* PT 1.05 ! ! A total of 171 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.02 KP 0.97 LA 0.98 ! MK 1.06 OV 1.00* PT 0.93 ! ! A total of 171 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.02 KP 0.87 LA 0.99 ! MK 1.00 OV 1.00 PT 1.00* ! ! A total of 171 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 EF 1.00* FD 1.09 HH 0.89 ! KP 0.86 LA 0.96 MC 1.00* NL 1.05 ! OV 1.02 PT 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.13 KP 0.86 LA 0.85 ! MK 1.07 OV 1.05 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* OV 1.00* PT 1.00* ! ! A total of 171 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.171769Jy sigma=0.748354 ! Fit after self-cal, rms=0.165900Jy sigma=0.750170 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.183 mas, bmaj=4.145 mas, bpa=9.534 degrees ! Estimated noise=0.510654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-61.5, -64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458971 Jy ! Component: 100 - total flux cleaned = 0.00071157 Jy ! Component: 150 - total flux cleaned = 0.00113005 Jy ! Component: 200 - total flux cleaned = 0.00139202 Jy ! Total flux subtracted in 200 components = 0.00139202 Jy ! Clean residual min=-0.003125 max=0.004291 Jy/beam ! Clean residual mean=-0.000011 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.142579 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.142579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165713Jy sigma=0.747606 ! Fit after self-cal, rms=0.165682Jy sigma=0.747302 ! Inverting map ! Added new window around map position (-11, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110682 Jy ! Component: 100 - total flux cleaned = 0.00162036 Jy ! Component: 150 - total flux cleaned = 0.00183679 Jy ! Component: 200 - total flux cleaned = 0.00183738 Jy ! Total flux subtracted in 200 components = 0.00183738 Jy ! Clean residual min=-0.003016 max=0.003548 Jy/beam ! Clean residual mean=-0.000010 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.144417 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.144417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165497Jy sigma=0.744892 ! Fit after self-cal, rms=0.165405Jy sigma=0.744717 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165405Jy sigma=0.744717 ! Fit after self-cal, rms=0.165422Jy sigma=0.744692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=4.145 mas, bpa=9.58 degrees ! Estimated noise=0.510961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627932 Jy ! Component: 100 - total flux cleaned = 0.000811815 Jy ! Component: 150 - total flux cleaned = 0.00106262 Jy ! Component: 200 - total flux cleaned = 0.00129277 Jy ! Total flux subtracted in 200 components = 0.00129277 Jy ! Clean residual min=-0.003037 max=0.003254 Jy/beam ! Clean residual mean=-0.000008 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.145709 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.145709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165331Jy sigma=0.743514 ! Fit after self-cal, rms=0.165286Jy sigma=0.743444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-89.5, -23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160192 Jy ! Component: 100 - total flux cleaned = 0.0016051 Jy ! Component: 150 - total flux cleaned = 0.00160211 Jy ! Component: 200 - total flux cleaned = 0.00167368 Jy ! Total flux subtracted in 200 components = 0.00167368 Jy ! Clean residual min=-0.003109 max=0.003187 Jy/beam ! Clean residual mean=-0.000007 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.147383 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 68 components and 0.147383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165173Jy sigma=0.742347 ! Fit after self-cal, rms=0.165122Jy sigma=0.742257 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165122Jy sigma=0.742257 ! Fit after self-cal, rms=0.165146Jy sigma=0.742241 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.179 mas, bmaj=4.144 mas, bpa=9.588 degrees ! Estimated noise=0.511329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653039 Jy ! Component: 100 - total flux cleaned = 0.000724168 Jy ! Component: 150 - total flux cleaned = 0.000856358 Jy ! Component: 200 - total flux cleaned = 0.000917847 Jy ! Total flux subtracted in 200 components = 0.000917847 Jy ! Clean residual min=-0.002980 max=0.003095 Jy/beam ! Clean residual mean=-0.000007 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.148301 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.148301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165077Jy sigma=0.741600 ! Fit after self-cal, rms=0.165049Jy sigma=0.741570 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275114 Jy ! Component: 100 - total flux cleaned = 0.000335648 Jy ! Component: 150 - total flux cleaned = 0.000393647 Jy ! Component: 200 - total flux cleaned = 0.000449146 Jy ! Total flux subtracted in 200 components = 0.000449146 Jy ! Clean residual min=-0.002923 max=0.003056 Jy/beam ! Clean residual mean=-0.000006 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.14875 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 79 components and 0.14875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.164999Jy sigma=0.741119 ! Fit after self-cal, rms=0.164982Jy sigma=0.741100 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.164982Jy sigma=0.741100 ! Fit after self-cal, rms=0.164080Jy sigma=0.741033 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.645 mas, bmaj=11.48 mas, bpa=-78.31 degrees ! Estimated noise=0.646229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000883602 Jy ! Component: 100 - total flux cleaned = 0.0010057 Jy ! Component: 150 - total flux cleaned = 0.0011481 Jy ! Component: 200 - total flux cleaned = 0.0012117 Jy ! Total flux subtracted in 200 components = 0.0012117 Jy ! Clean residual min=-0.003116 max=0.002899 Jy/beam ! Clean residual mean=-0.000012 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.149962 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 93 components and 0.149962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.164060Jy sigma=0.741002 ! Fit after self-cal, rms=0.164050Jy sigma=0.740971 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393399 Jy ! Component: 100 - total flux cleaned = 0.000456723 Jy ! Component: 150 - total flux cleaned = 0.000455577 Jy ! Component: 200 - total flux cleaned = 0.0004554 Jy ! Total flux subtracted in 200 components = 0.0004554 Jy ! Clean residual min=-0.003069 max=0.002858 Jy/beam ! Clean residual mean=-0.000010 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.150417 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.150417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.164040Jy sigma=0.740992 ! Fit after self-cal, rms=0.164032Jy sigma=0.740976 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.177 mas, bmaj=4.14 mas, bpa=9.442 degrees ! Estimated noise=0.511379 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.177 x 4.14 at 9.442 degrees (North through East) ! Clean map min=-0.0047279 max=0.11247 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.549 mas, bmaj=3.22 mas, bpa=4.03 degrees ! Estimated noise=1.06679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708555 Jy ! Component: 100 - total flux cleaned = 0.0945214 Jy ! Component: 150 - total flux cleaned = 0.108041 Jy ! Component: 200 - total flux cleaned = 0.113259 Jy ! Total flux subtracted in 200 components = 0.113259 Jy ! Clean residual min=-0.008166 max=0.009539 Jy/beam ! Clean residual mean=-0.000033 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 0.113259 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.113259 Jy ! Inverting map and beam ! Estimated beam: bmin=2.177 mas, bmaj=4.14 mas, bpa=9.442 degrees ! Estimated noise=0.511379 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175622 Jy ! Component: 100 - total flux cleaned = 0.024594 Jy ! Component: 150 - total flux cleaned = 0.0274961 Jy ! Component: 200 - total flux cleaned = 0.0291258 Jy ! Total flux subtracted in 200 components = 0.0291258 Jy ! Clean residual min=-0.003364 max=0.004110 Jy/beam ! Clean residual mean=-0.000020 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.142385 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 41 components and 0.142385 Jy ! Inverting map ! Added new window around map position (20, -52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224022 Jy ! Component: 100 - total flux cleaned = 0.00327193 Jy ! Component: 150 - total flux cleaned = 0.00395429 Jy ! Component: 200 - total flux cleaned = 0.00446056 Jy ! Total flux subtracted in 200 components = 0.00446056 Jy ! Clean residual min=-0.003182 max=0.003320 Jy/beam ! Clean residual mean=-0.000016 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.146845 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 61 components and 0.146845 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.645 mas, bmaj=11.48 mas, bpa=-78.31 degrees ! Estimated noise=0.646229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261214 Jy ! Component: 100 - total flux cleaned = 0.00343592 Jy ! Component: 150 - total flux cleaned = 0.00385905 Jy ! Component: 200 - total flux cleaned = 0.00412037 Jy ! Total flux subtracted in 200 components = 0.00412037 Jy ! Clean residual min=-0.003301 max=0.002960 Jy/beam ! Clean residual mean=-0.000019 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.150965 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141281 Jy ! Component: 100 - total flux cleaned = 0.000306399 Jy ! Component: 150 - total flux cleaned = 0.000453166 Jy ! Component: 200 - total flux cleaned = 0.000488425 Jy ! Total flux subtracted in 200 components = 0.000488425 Jy ! Clean residual min=-0.003236 max=0.002933 Jy/beam ! Clean residual mean=-0.000016 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.151454 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.151454 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.177 mas, bmaj=4.14 mas, bpa=9.442 degrees ! Estimated noise=0.511379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000902175 Jy ! Component: 100 - total flux cleaned = -0.000689314 Jy ! Component: 150 - total flux cleaned = -0.00069505 Jy ! Component: 200 - total flux cleaned = -0.000789138 Jy ! Total flux subtracted in 200 components = -0.000789138 Jy ! Clean residual min=-0.002869 max=0.003317 Jy/beam ! Clean residual mean=-0.000009 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.150665 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 86 components and 0.150665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.164224Jy sigma=0.740669 ! Fit after self-cal, rms=0.164294Jy sigma=0.740473 wmodel ./J1520+1601_S_map.mod ! Writing 86 model components to file: ./J1520+1601_S_map.mod wobs ./J1520+1601_S_uvs.fits ! Writing UV FITS file: ./J1520+1601_S_uvs.fits wwins ./J1520+1601_S_map.win ! wwins: Wrote 6 windows to ./J1520+1601_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012741 Jy ! Component: 100 - total flux cleaned = 0.00218938 Jy ! Component: 150 - total flux cleaned = 0.00296648 Jy ! Component: 200 - total flux cleaned = 0.00362111 Jy ! Component: 250 - total flux cleaned = 0.00430865 Jy ! Component: 300 - total flux cleaned = 0.00483615 Jy ! Component: 350 - total flux cleaned = 0.00535414 Jy ! Component: 400 - total flux cleaned = 0.00586264 Jy ! Component: 450 - total flux cleaned = 0.0062712 Jy ! Component: 500 - total flux cleaned = 0.00658393 Jy ! Component: 550 - total flux cleaned = 0.00697991 Jy ! Component: 600 - total flux cleaned = 0.00728331 Jy ! Component: 650 - total flux cleaned = 0.00745504 Jy ! Component: 700 - total flux cleaned = 0.00779333 Jy ! Component: 750 - total flux cleaned = 0.0080846 Jy ! Component: 800 - total flux cleaned = 0.0082905 Jy ! Component: 850 - total flux cleaned = 0.00869659 Jy ! Component: 900 - total flux cleaned = 0.00897755 Jy ! Component: 950 - total flux cleaned = 0.00929413 Jy ! Component: 1000 - total flux cleaned = 0.00960717 Jy ! Component: 1050 - total flux cleaned = 0.0096852 Jy ! Component: 1100 - total flux cleaned = 0.0100302 Jy ! Component: 1150 - total flux cleaned = 0.0102191 Jy ! Component: 1200 - total flux cleaned = 0.0103316 Jy ! Component: 1250 - total flux cleaned = 0.0104433 Jy ! Component: 1300 - total flux cleaned = 0.0104805 Jy ! Component: 1350 - total flux cleaned = 0.0106267 Jy ! Component: 1400 - total flux cleaned = 0.0106624 Jy ! Component: 1450 - total flux cleaned = 0.0107348 Jy ! Component: 1500 - total flux cleaned = 0.0109478 Jy ! Component: 1550 - total flux cleaned = 0.0109824 Jy ! Component: 1600 - total flux cleaned = 0.0110522 Jy ! Component: 1650 - total flux cleaned = 0.0111908 Jy ! Component: 1700 - total flux cleaned = 0.0112936 Jy ! Component: 1750 - total flux cleaned = 0.0113617 Jy ! Component: 1800 - total flux cleaned = 0.011531 Jy ! Component: 1850 - total flux cleaned = 0.0116315 Jy ! Component: 1900 - total flux cleaned = 0.011698 Jy ! Component: 1950 - total flux cleaned = 0.0116653 Jy ! Component: 2000 - total flux cleaned = 0.011862 Jy ! Component: 2050 - total flux cleaned = 0.0120253 Jy ! Component: 2100 - total flux cleaned = 0.0120574 Jy ! Component: 2150 - total flux cleaned = 0.0123148 Jy ! Component: 2200 - total flux cleaned = 0.0122824 Jy ! Component: 2250 - total flux cleaned = 0.0123145 Jy ! Component: 2300 - total flux cleaned = 0.0124406 Jy ! Component: 2350 - total flux cleaned = 0.0124093 Jy ! Component: 2400 - total flux cleaned = 0.0125959 Jy ! Component: 2450 - total flux cleaned = 0.0127507 Jy ! Component: 2500 - total flux cleaned = 0.0126894 Jy ! Component: 2550 - total flux cleaned = 0.0128728 Jy ! Component: 2600 - total flux cleaned = 0.012873 Jy ! Component: 2650 - total flux cleaned = 0.0130841 Jy ! Component: 2700 - total flux cleaned = 0.0130842 Jy ! Component: 2750 - total flux cleaned = 0.0131144 Jy ! Component: 2800 - total flux cleaned = 0.0132925 Jy ! Component: 2850 - total flux cleaned = 0.0133809 Jy ! Component: 2900 - total flux cleaned = 0.0134392 Jy ! Component: 2950 - total flux cleaned = 0.0133517 Jy ! Component: 3000 - total flux cleaned = 0.0133807 Jy ! Component: 3050 - total flux cleaned = 0.0134095 Jy ! Component: 3100 - total flux cleaned = 0.0135813 Jy ! Component: 3150 - total flux cleaned = 0.0135527 Jy ! Component: 3200 - total flux cleaned = 0.0134959 Jy ! Component: 3250 - total flux cleaned = 0.0133833 Jy ! Component: 3300 - total flux cleaned = 0.0133833 Jy ! Component: 3350 - total flux cleaned = 0.0134113 Jy ! Component: 3400 - total flux cleaned = 0.0134665 Jy ! Component: 3450 - total flux cleaned = 0.0135767 Jy ! Component: 3500 - total flux cleaned = 0.0134396 Jy ! Component: 3550 - total flux cleaned = 0.0135486 Jy ! Component: 3600 - total flux cleaned = 0.0135486 Jy ! Component: 3650 - total flux cleaned = 0.0135218 Jy ! Component: 3700 - total flux cleaned = 0.0135752 Jy ! Component: 3750 - total flux cleaned = 0.0136019 Jy ! Component: 3800 - total flux cleaned = 0.0135753 Jy ! Component: 3850 - total flux cleaned = 0.0135489 Jy ! Component: 3900 - total flux cleaned = 0.0136805 Jy ! Component: 3950 - total flux cleaned = 0.0136544 Jy ! Component: 4000 - total flux cleaned = 0.0136283 Jy ! Component: 4050 - total flux cleaned = 0.0136281 Jy ! Total flux subtracted in 4096 components = 0.0136538 Jy ! Clean residual min=-0.001292 max=0.001422 Jy/beam ! Clean residual mean=-0.000009 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.164318 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 378 components and 0.164318 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "./J1520+1601_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.177 x 4.14 at 9.442 degrees (North through East) ! Clean map min=-0.0043921 max=0.11202 Jy/beam ! Writing clean map to FITS file: ./J1520+1601_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112022 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000436189 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16813 1.16813 2.33627 4.67253 9.34507 18.6901 37.3803 74.7606 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.112 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 256.819 quit ! Quitting program ! Log file ./J1520+1601_S_uvs.log closed on Sat Jan 2 09:57:07 2016