! Started logfile: /scr/pima/gb073_uvs/J1456-0617_X_uvs.log on Sat Dec 26 09:41:03 2015 obs /scr/pima/gb073_uvs/J1456-0617_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1456-0617_X_uva.fits ! AN table 1: 21 integrations on 55 of 55 possible baselines. ! AN table 2: 53 integrations on 10 of 10 possible baselines. ! AN table 3: 21 integrations on 66 of 66 possible baselines. ! AN table 4: 10 integrations on 6 of 6 possible baselines. ! AN table 5: 31 integrations on 36 of 36 possible baselines. ! AN table 6: 10 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.717031 visibilities/baseline/integration-bin. ! Found source: J1456-0617 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 25968 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1456-0617_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 31 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 86 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 31 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 67 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 67 telescope corrections were flagged in sub-array 1. ! A total of 72 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.010073Jy sigma=9.673435 ! Fit after self-cal, rms=0.888455Jy sigma=8.534213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.48% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.7631 mas, bmaj=1.105 mas, bpa=16.99 degrees ! Estimated noise=0.87352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869662 Jy ! Component: 100 - total flux cleaned = 0.112426 Jy ! Total flux subtracted in 100 components = 0.112426 Jy ! Clean residual min=-0.003487 max=0.011059 Jy/beam ! Clean residual mean=-0.000004 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.112426 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.112426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.085292Jy sigma=0.673003 ! Fit after self-cal, rms=0.084960Jy sigma=0.671520 ! Inverting map ! Your choice of large map pixels excluded 5.48% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114654 Jy ! Component: 100 - total flux cleaned = 0.0168209 Jy ! Total flux subtracted in 100 components = 0.0168209 Jy ! Clean residual min=-0.002619 max=0.006075 Jy/beam ! Clean residual mean=-0.000002 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.129247 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.129247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.083264Jy sigma=0.654131 ! Fit after self-cal, rms=0.083181Jy sigma=0.654000 ! Inverting map ! Your choice of large map pixels excluded 5.48% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Added new window around map position (15.6, 13). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519352 Jy ! Component: 100 - total flux cleaned = 0.00788039 Jy ! Total flux subtracted in 100 components = 0.00788039 Jy ! Clean residual min=-0.002473 max=0.002787 Jy/beam ! Clean residual mean=-0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.137127 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.137127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082888Jy sigma=0.650178 ! Fit after self-cal, rms=0.082859Jy sigma=0.649841 ! Inverting map ! Your choice of large map pixels excluded 5.48% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.48% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.9719 mas, bmaj=1.348 mas, bpa=16.44 degrees ! Estimated noise=0.511701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.8, 15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298766 Jy ! Component: 100 - total flux cleaned = 0.00464431 Jy ! Component: 150 - total flux cleaned = 0.00580661 Jy ! Component: 200 - total flux cleaned = 0.00663118 Jy ! Total flux subtracted in 200 components = 0.00663118 Jy ! Clean residual min=-0.002280 max=0.001827 Jy/beam ! Clean residual mean=-0.000003 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.143759 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.143759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082748Jy sigma=0.648502 ! Fit after self-cal, rms=0.082744Jy sigma=0.648354 ! Inverting map ! Your choice of large map pixels excluded 5.48% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9719 x 1.348 at 16.44 degrees (North through East) ! Clean map min=-0.001984 max=0.11352 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.02 MC 0.92 ON 0.84 ! ZC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 KP 0.95 MK 0.93 OV 0.93 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 0.96 KP 1.00 LA 1.06 ! MK 0.99 NL 0.95 OV 0.99 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.95 KP 0.99 LA 0.99 ! MK 1.11 NL 0.89 PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 EF 1.00* FD 1.07 HH 1.01 ! KP 1.03 LA 1.07 MC 1.00* NL 1.03 ! OV 1.10 PT 1.00 SC 0.93 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 KP 0.98 MK 1.16 OV 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.01 KP 1.05 LA 1.07 ! MK 1.03 NL 0.97 OV 1.02 PT 1.04 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 1.09 KP 1.01 LA 1.06 ! MK 1.07 NL 0.91 PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 KP 0.92 MK 0.93 OV 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 0.99 KP 0.95 LA 1.02 ! MK 1.03 NL 0.93 OV 0.99 PT 1.01 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 0.99 KP 0.93 LA 0.99 ! MK 0.95 NL 0.98 PT 0.99 SC 1.15 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 EF 1.00* FD 1.08 HH 1.18 ! KP 1.01 LA 1.03 MC 1.00* NL 0.93 ! OV 1.06 PT 1.00 SC 1.10 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 KP 1.03 MK 0.89 OV 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.98 KP 1.01 LA 1.00 ! MK 1.00 NL 0.95 OV 1.01 PT 1.04 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.95 FD 0.98 KP 0.99 LA 1.00 ! MK 1.08 NL 0.99 PT 1.01 SC 1.17 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.04 HH 1.06 ! KP 0.93 LA 1.05 MC 1.00* NL 1.00 ! OV 1.07 PT 0.95 SC 1.12 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.16 MC 1.15 ON 1.03 ! ZC 0.84 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.03 KP 0.95 LA 1.00 ! MK 1.04 NL 0.98 OV 0.98 PT 0.97 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 0.95 KP 0.88 LA 1.02 ! MK 1.07 NL 1.00 PT 1.02 SC 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.08 MC 0.99 ON 1.10 ! ZC 0.91 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.98 KP 0.92 LA 0.98 ! MK 1.01 NL 0.95 OV 1.04 PT 0.95 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.86 KP 0.98 MK 0.90 OV 1.16 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.98 KP 0.93 LA 1.04 ! MK 1.09 NL 1.05 OV 0.97 PT 1.05 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.93 FD 0.96 KP 0.99 LA 1.07 ! MK 1.09 NL 1.02 PT 0.98 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 EF 1.00* FD 1.09 HH 0.88 ! KP 0.92 LA 1.06 MC 1.00* NL 1.03 ! OV 0.99 PT 1.06 SC 0.95 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 EF 1.00* FD 1.00 HH 1.11 ! KP 0.92 LA 1.01 MC 0.96 NL 1.13 ! ON 0.87 OV 1.00 PT 1.01 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.13 KP 0.95 MK 0.86 OV 0.97 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.01 KP 0.91 LA 1.06 ! MK 1.17 NL 0.96 OV 0.99 PT 1.00 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 1.13 KP 0.98 LA 1.02 ! MK 1.04 NL 1.05 PT 1.04 SC 1.05 ! ! ! Fit before self-cal, rms=0.082744Jy sigma=0.648354 ! Fit after self-cal, rms=0.082609Jy sigma=0.647674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.9786 mas, bmaj=1.437 mas, bpa=13.8 degrees ! Estimated noise=0.514602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379755 Jy ! Component: 100 - total flux cleaned = 0.000547818 Jy ! Component: 150 - total flux cleaned = 0.000712538 Jy ! Component: 200 - total flux cleaned = 0.00077447 Jy ! Total flux subtracted in 200 components = 0.00077447 Jy ! Clean residual min=-0.001698 max=0.001482 Jy/beam ! Clean residual mean=-0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.144533 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.144533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082592Jy sigma=0.647546 ! Fit after self-cal, rms=0.082653Jy sigma=0.647440 ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082653Jy sigma=0.647440 ! Fit after self-cal, rms=0.082224Jy sigma=0.646069 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.9787 mas, bmaj=1.432 mas, bpa=13.88 degrees ! Estimated noise=0.513735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128798 Jy ! Component: 100 - total flux cleaned = 0.000167471 Jy ! Component: 150 - total flux cleaned = 0.000202767 Jy ! Component: 200 - total flux cleaned = 0.000235541 Jy ! Total flux subtracted in 200 components = 0.000235541 Jy ! Clean residual min=-0.001570 max=0.001466 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.144769 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.144769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082213Jy sigma=0.646016 ! Fit after self-cal, rms=0.082252Jy sigma=0.645972 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76348e-05 Jy ! Component: 100 - total flux cleaned = 7.13637e-05 Jy ! Component: 150 - total flux cleaned = 0.000102655 Jy ! Component: 200 - total flux cleaned = 0.000118281 Jy ! Total flux subtracted in 200 components = 0.000118281 Jy ! Clean residual min=-0.001549 max=0.001483 Jy/beam ! Clean residual mean=-0.000003 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.144887 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.144887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082243Jy sigma=0.645943 ! Fit after self-cal, rms=0.082241Jy sigma=0.645938 ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082241Jy sigma=0.645938 ! Fit after self-cal, rms=0.082203Jy sigma=0.645913 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.979 mas, bmaj=1.433 mas, bpa=13.89 degrees ! Estimated noise=0.51367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.66087e-05 Jy ! Component: 100 - total flux cleaned = -1.61759e-05 Jy ! Component: 150 - total flux cleaned = -1.67029e-06 Jy ! Component: 200 - total flux cleaned = 2.76284e-05 Jy ! Total flux subtracted in 200 components = 2.76284e-05 Jy ! Clean residual min=-0.001521 max=0.001462 Jy/beam ! Clean residual mean=-0.000003 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.144914 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.144914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082196Jy sigma=0.645892 ! Fit after self-cal, rms=0.082180Jy sigma=0.645879 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.09036e-06 Jy ! Component: 100 - total flux cleaned = 1.36201e-05 Jy ! Component: 150 - total flux cleaned = 2.78845e-05 Jy ! Component: 200 - total flux cleaned = 4.17515e-05 Jy ! Total flux subtracted in 200 components = 4.17515e-05 Jy ! Clean residual min=-0.001507 max=0.001457 Jy/beam ! Clean residual mean=-0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.144956 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.144956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082174Jy sigma=0.645861 ! Fit after self-cal, rms=0.082172Jy sigma=0.645858 ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082172Jy sigma=0.645858 ! Fit after self-cal, rms=0.082167Jy sigma=0.645888 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=2.577 mas, bmaj=3.837 mas, bpa=1.382 degrees ! Estimated noise=0.612739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.47427e-05 Jy ! Component: 100 - total flux cleaned = 4.86105e-05 Jy ! Component: 150 - total flux cleaned = 8.23729e-05 Jy ! Component: 200 - total flux cleaned = 0.000101474 Jy ! Total flux subtracted in 200 components = 0.000101474 Jy ! Clean residual min=-0.001652 max=0.001756 Jy/beam ! Clean residual mean=-0.000005 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.145058 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 59 components and 0.145058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082170Jy sigma=0.645902 ! Fit after self-cal, rms=0.082165Jy sigma=0.645889 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.83883e-05 Jy ! Component: 100 - total flux cleaned = 3.47717e-05 Jy ! Component: 150 - total flux cleaned = 6.186e-05 Jy ! Component: 200 - total flux cleaned = 8.56915e-05 Jy ! Total flux subtracted in 200 components = 8.56915e-05 Jy ! Clean residual min=-0.001650 max=0.001745 Jy/beam ! Clean residual mean=-0.000005 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.145143 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.145143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082166Jy sigma=0.645913 ! Fit after self-cal, rms=0.082167Jy sigma=0.645906 ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.9792 mas, bmaj=1.432 mas, bpa=13.9 degrees ! Estimated noise=0.513665 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9792 x 1.432 at 13.9 degrees (North through East) ! Clean map min=-0.0012601 max=0.11413 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.7691 mas, bmaj=1.126 mas, bpa=17 degrees ! Estimated noise=0.881674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869563 Jy ! Component: 100 - total flux cleaned = 0.112243 Jy ! Component: 150 - total flux cleaned = 0.123479 Jy ! Component: 200 - total flux cleaned = 0.130039 Jy ! Total flux subtracted in 200 components = 0.130039 Jy ! Clean residual min=-0.002533 max=0.003630 Jy/beam ! Clean residual mean=-0.000002 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.130039 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.130039 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.9792 mas, bmaj=1.432 mas, bpa=13.9 degrees ! Estimated noise=0.513665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482458 Jy ! Component: 100 - total flux cleaned = 0.00797857 Jy ! Component: 150 - total flux cleaned = 0.0101797 Jy ! Component: 200 - total flux cleaned = 0.0117759 Jy ! Total flux subtracted in 200 components = 0.0117759 Jy ! Clean residual min=-0.001584 max=0.001504 Jy/beam ! Clean residual mean=-0.000004 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.141815 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.141815 Jy ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=2.577 mas, bmaj=3.837 mas, bpa=1.382 degrees ! Estimated noise=0.612739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145905 Jy ! Component: 100 - total flux cleaned = 0.0023076 Jy ! Component: 150 - total flux cleaned = 0.00281045 Jy ! Component: 200 - total flux cleaned = 0.0029477 Jy ! Total flux subtracted in 200 components = 0.0029477 Jy ! Clean residual min=-0.001681 max=0.001712 Jy/beam ! Clean residual mean=-0.000005 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.144762 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.85155e-05 Jy ! Component: 100 - total flux cleaned = 0.000141668 Jy ! Component: 150 - total flux cleaned = 0.000190157 Jy ! Component: 200 - total flux cleaned = 0.000224196 Jy ! Total flux subtracted in 200 components = 0.000224196 Jy ! Clean residual min=-0.001695 max=0.001721 Jy/beam ! Clean residual mean=-0.000005 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.144987 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.144987 Jy ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! Estimated beam: bmin=0.9792 mas, bmaj=1.432 mas, bpa=13.9 degrees ! Estimated noise=0.513665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.80382e-05 Jy ! Component: 100 - total flux cleaned = 0.000120069 Jy ! Component: 150 - total flux cleaned = 0.000119792 Jy ! Component: 200 - total flux cleaned = 0.000169287 Jy ! Total flux subtracted in 200 components = 0.000169287 Jy ! Clean residual min=-0.001569 max=0.001484 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.145156 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.145156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.082269Jy sigma=0.646257 ! Fit after self-cal, rms=0.082270Jy sigma=0.646192 wmodel /scr/pima/gb073_uvs/J1456-0617_X_map.mod ! Writing 58 model components to file: /scr/pima/gb073_uvs/J1456-0617_X_map.mod wobs /scr/pima/gb073_uvs/J1456-0617_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1456-0617_X_uvs.fits wwins /scr/pima/gb073_uvs/J1456-0617_X_map.win ! wwins: Wrote 3 windows to /scr/pima/gb073_uvs/J1456-0617_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339318 Jy ! Component: 100 - total flux cleaned = -0.000625266 Jy ! Component: 150 - total flux cleaned = -0.000975356 Jy ! Component: 200 - total flux cleaned = -0.00129052 Jy ! Component: 250 - total flux cleaned = -0.00145595 Jy ! Component: 300 - total flux cleaned = -0.00166392 Jy ! Component: 350 - total flux cleaned = -0.00180017 Jy ! Component: 400 - total flux cleaned = -0.00193467 Jy ! Component: 450 - total flux cleaned = -0.00208914 Jy ! Component: 500 - total flux cleaned = -0.00232766 Jy ! Component: 550 - total flux cleaned = -0.00245585 Jy ! Component: 600 - total flux cleaned = -0.00260365 Jy ! Component: 650 - total flux cleaned = -0.00268744 Jy ! Component: 700 - total flux cleaned = -0.00281169 Jy ! Component: 750 - total flux cleaned = -0.00295506 Jy ! Component: 800 - total flux cleaned = -0.00305616 Jy ! Component: 850 - total flux cleaned = -0.00317607 Jy ! Component: 900 - total flux cleaned = -0.00325527 Jy ! Component: 950 - total flux cleaned = -0.00331412 Jy ! Component: 1000 - total flux cleaned = -0.00337286 Jy ! Component: 1050 - total flux cleaned = -0.00346928 Jy ! Component: 1100 - total flux cleaned = -0.00354569 Jy ! Component: 1150 - total flux cleaned = -0.0035838 Jy ! Component: 1200 - total flux cleaned = -0.00364049 Jy ! Component: 1250 - total flux cleaned = -0.00369689 Jy ! Component: 1300 - total flux cleaned = -0.00378962 Jy ! Component: 1350 - total flux cleaned = -0.00388135 Jy ! Component: 1400 - total flux cleaned = -0.00388141 Jy ! Component: 1450 - total flux cleaned = -0.0038996 Jy ! Component: 1500 - total flux cleaned = -0.00400748 Jy ! Component: 1550 - total flux cleaned = -0.00400739 Jy ! Component: 1600 - total flux cleaned = -0.00400744 Jy ! Component: 1650 - total flux cleaned = -0.00409572 Jy ! Component: 1700 - total flux cleaned = -0.00407836 Jy ! Component: 1750 - total flux cleaned = -0.00411321 Jy ! Component: 1800 - total flux cleaned = -0.00411319 Jy ! Component: 1850 - total flux cleaned = -0.00407877 Jy ! Component: 1900 - total flux cleaned = -0.00412999 Jy ! Component: 1950 - total flux cleaned = -0.0041639 Jy ! Component: 2000 - total flux cleaned = -0.00414699 Jy ! Component: 2050 - total flux cleaned = -0.00419722 Jy ! Component: 2100 - total flux cleaned = -0.0042137 Jy ! Component: 2150 - total flux cleaned = -0.00419685 Jy ! Component: 2200 - total flux cleaned = -0.00421345 Jy ! Component: 2250 - total flux cleaned = -0.00424632 Jy ! Component: 2300 - total flux cleaned = -0.00424633 Jy ! Component: 2350 - total flux cleaned = -0.00418167 Jy ! Component: 2400 - total flux cleaned = -0.00426221 Jy ! Component: 2450 - total flux cleaned = -0.0043103 Jy ! Component: 2500 - total flux cleaned = -0.00432619 Jy ! Component: 2550 - total flux cleaned = -0.00434202 Jy ! Component: 2600 - total flux cleaned = -0.00431043 Jy ! Component: 2650 - total flux cleaned = -0.00431031 Jy ! Component: 2700 - total flux cleaned = -0.00435707 Jy ! Component: 2750 - total flux cleaned = -0.00434157 Jy ! Component: 2800 - total flux cleaned = -0.00431065 Jy ! Component: 2850 - total flux cleaned = -0.00429531 Jy ! Component: 2900 - total flux cleaned = -0.00437182 Jy ! Component: 2950 - total flux cleaned = -0.00434133 Jy ! Component: 3000 - total flux cleaned = -0.00440212 Jy ! Component: 3050 - total flux cleaned = -0.00437188 Jy ! Component: 3100 - total flux cleaned = -0.00440198 Jy ! Component: 3150 - total flux cleaned = -0.00449174 Jy ! Component: 3200 - total flux cleaned = -0.00456618 Jy ! Component: 3250 - total flux cleaned = -0.00461064 Jy ! Component: 3300 - total flux cleaned = -0.00458113 Jy ! Component: 3350 - total flux cleaned = -0.00469876 Jy ! Component: 3400 - total flux cleaned = -0.00471345 Jy ! Component: 3450 - total flux cleaned = -0.0047426 Jy ! Component: 3500 - total flux cleaned = -0.00478612 Jy ! Component: 3550 - total flux cleaned = -0.00477169 Jy ! Component: 3600 - total flux cleaned = -0.00485813 Jy ! Component: 3650 - total flux cleaned = -0.00497274 Jy ! Component: 3700 - total flux cleaned = -0.00498703 Jy ! Component: 3750 - total flux cleaned = -0.00491579 Jy ! Component: 3800 - total flux cleaned = -0.00501499 Jy ! Component: 3850 - total flux cleaned = -0.00509966 Jy ! Component: 3900 - total flux cleaned = -0.00509962 Jy ! Component: 3950 - total flux cleaned = -0.00512757 Jy ! Component: 4000 - total flux cleaned = -0.00518341 Jy ! Component: 4050 - total flux cleaned = -0.00519723 Jy ! Total flux subtracted in 4096 components = -0.00522483 Jy ! Clean residual min=-0.000831 max=0.000884 Jy/beam ! Clean residual mean=-0.000002 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.139931 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 385 components and 0.139931 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1456-0617_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9792 x 1.432 at 13.9 degrees (North through East) ! Clean map min=-0.0011956 max=0.11384 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1456-0617_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113838 invert ! Inverting map ! Your choice of large map pixels excluded 5.59% of the data. ! The x-axis pixel size should ideally be below 0.1654 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236698 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.623775 0.623775 1.24755 2.4951 4.9902 9.98041 19.9608 39.9216 79.8432 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.113 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 480.942 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1456-0617_X_uvs.log closed on Sat Dec 26 09:41:08 2015