! Started logfile: ./J1314+2348_S_uvs.log on Sat Jan 2 09:54:58 2016 obs J1314+2348_S_uva.fits ! Reading UV FITS file: J1314+2348_S_uva.fits ! AN table 1: 59 integrations on 55 of 55 possible baselines. ! AN table 2: 59 integrations on 78 of 78 possible baselines. ! AN table 3: 58 integrations on 36 of 36 possible baselines. ! AN table 4: 59 integrations on 55 of 55 possible baselines. ! AN table 5: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.818556 visibilities/baseline/integration-bin. ! Found source: J1314+2348 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 103400 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet ./J1314+2348_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 4. ! A total of 72 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 113 telescope corrections were flagged in sub-array 1. ! A total of 114 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 4. ! A total of 72 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! A total of 172 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 112 telescope corrections were flagged in sub-array 4. ! A total of 72 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 1. ! A total of 172 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 112 telescope corrections were flagged in sub-array 4. ! A total of 72 telescope corrections were flagged in sub-array 5. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 171 telescope corrections were flagged in sub-array 1. ! A total of 172 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! A total of 170 telescope corrections were flagged in sub-array 4. ! A total of 130 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 185 telescope corrections were flagged in sub-array 1. ! A total of 187 telescope corrections were flagged in sub-array 2. ! A total of 185 telescope corrections were flagged in sub-array 4. ! A total of 147 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 128 telescope corrections were flagged in sub-array 1. ! A total of 187 telescope corrections were flagged in sub-array 2. ! A total of 127 telescope corrections were flagged in sub-array 4. ! A total of 89 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.016894Jy sigma=7.379827 ! Fit after self-cal, rms=0.914201Jy sigma=6.722350 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.635 mas, bmaj=4.01 mas, bpa=-1.987 degrees ! Estimated noise=0.893061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587451 Jy ! Component: 100 - total flux cleaned = 0.0772756 Jy ! Total flux subtracted in 100 components = 0.0772756 Jy ! Clean residual min=-0.006931 max=0.011288 Jy/beam ! Clean residual mean=-0.000007 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.0772756 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0772756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.157275Jy sigma=0.717134 ! Fit after self-cal, rms=0.156623Jy sigma=0.712843 ! Inverting map ! Added new window around map position (-3, 17). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012652 Jy ! Component: 100 - total flux cleaned = 0.0209044 Jy ! Total flux subtracted in 100 components = 0.0209044 Jy ! Clean residual min=-0.007053 max=0.010185 Jy/beam ! Clean residual mean=-0.000004 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.09818 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.09818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.155114Jy sigma=0.693982 ! Fit after self-cal, rms=0.154938Jy sigma=0.693086 ! Inverting map ! Added new window around map position (3, -17.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851299 Jy ! Component: 100 - total flux cleaned = 0.0135834 Jy ! Total flux subtracted in 100 components = 0.0135834 Jy ! Clean residual min=-0.005993 max=0.006042 Jy/beam ! Clean residual mean=-0.000001 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.111763 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.111763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154459Jy sigma=0.688511 ! Fit after self-cal, rms=0.154379Jy sigma=0.688201 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=4.914 mas, bpa=-0.1557 degrees ! Estimated noise=0.427302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00641594 Jy ! Component: 100 - total flux cleaned = 0.0057301 Jy ! Component: 150 - total flux cleaned = 0.00503552 Jy ! Component: 200 - total flux cleaned = 0.00492371 Jy ! Total flux subtracted in 200 components = 0.00492371 Jy ! Clean residual min=-0.003123 max=0.004148 Jy/beam ! Clean residual mean=-0.000012 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.116687 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.116687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153683Jy sigma=0.686784 ! Fit after self-cal, rms=0.153731Jy sigma=0.686678 ! Inverting map ! Added new window around map position (-2, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212884 Jy ! Component: 100 - total flux cleaned = 0.00249108 Jy ! Component: 150 - total flux cleaned = 0.00249194 Jy ! Component: 200 - total flux cleaned = 0.00263134 Jy ! Total flux subtracted in 200 components = 0.00263134 Jy ! Clean residual min=-0.002640 max=0.003469 Jy/beam ! Clean residual mean=-0.000005 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.119318 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.119318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153581Jy sigma=0.684883 ! Fit after self-cal, rms=0.153584Jy sigma=0.684699 ! Inverting map ! Added new window around map position (-92, 40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245347 Jy ! Component: 100 - total flux cleaned = 0.00277284 Jy ! Component: 150 - total flux cleaned = 0.00297533 Jy ! Component: 200 - total flux cleaned = 0.00315875 Jy ! Total flux subtracted in 200 components = 0.00315875 Jy ! Clean residual min=-0.002619 max=0.003051 Jy/beam ! Clean residual mean=-0.000006 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.122477 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 60 components and 0.122477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153482Jy sigma=0.683689 ! Fit after self-cal, rms=0.153469Jy sigma=0.683572 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.384 x 4.914 at -0.1557 degrees (North through East) ! Clean map min=-0.0032629 max=0.089753 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.93 KP 1.05 LA 1.02 ! MK 0.96 NL 0.89 OV 1.12 PT 1.02 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.95 KP 1.03 LA 1.08 ! MK 0.94 NL 0.97 OV 1.04 PT 1.06 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.05 KP 1.08 LA 1.03 ! MK 1.01 NL 0.91 OV 1.00* PT 0.98 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.97 KP 1.03 LA 0.99 ! MK 0.91 NL 1.08 OV 1.00* PT 1.02 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 1.05 KP 0.91 LA 1.05 ! MK 1.05 NL 1.09 OV 1.09 PT 1.00* ! SC 0.85 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.16 FD 1.13 KP 0.84 LA 0.90 ! MK 1.11 NL 1.02 OV 1.00 PT 1.06 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.153469Jy sigma=0.683572 ! Fit after self-cal, rms=0.153514Jy sigma=0.682360 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=4.907 mas, bpa=-0.1508 degrees ! Estimated noise=0.43026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186906 Jy ! Component: 100 - total flux cleaned = 0.00260388 Jy ! Component: 150 - total flux cleaned = 0.00288543 Jy ! Component: 200 - total flux cleaned = 0.00320644 Jy ! Total flux subtracted in 200 components = 0.00320644 Jy ! Clean residual min=-0.002701 max=0.002362 Jy/beam ! Clean residual mean=-0.000003 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.125684 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.125684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153416Jy sigma=0.681486 ! Fit after self-cal, rms=0.153383Jy sigma=0.681361 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153383Jy sigma=0.681361 ! Fit after self-cal, rms=0.153404Jy sigma=0.681347 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=4.904 mas, bpa=-0.1765 degrees ! Estimated noise=0.430552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848715 Jy ! Component: 100 - total flux cleaned = 0.00103087 Jy ! Component: 150 - total flux cleaned = 0.00114267 Jy ! Component: 200 - total flux cleaned = 0.00129846 Jy ! Total flux subtracted in 200 components = 0.00129846 Jy ! Clean residual min=-0.002639 max=0.002111 Jy/beam ! Clean residual mean=-0.000003 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.126982 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 81 components and 0.126982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153349Jy sigma=0.680968 ! Fit after self-cal, rms=0.153334Jy sigma=0.680878 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172338 Jy ! Component: 100 - total flux cleaned = 0.000322656 Jy ! Component: 150 - total flux cleaned = 0.000416572 Jy ! Component: 200 - total flux cleaned = 0.00046062 Jy ! Total flux subtracted in 200 components = 0.00046062 Jy ! Clean residual min=-0.002648 max=0.002083 Jy/beam ! Clean residual mean=-0.000003 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.127443 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.127443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153295Jy sigma=0.680650 ! Fit after self-cal, rms=0.153294Jy sigma=0.680634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153294Jy sigma=0.680634 ! Fit after self-cal, rms=0.153305Jy sigma=0.680627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=4.903 mas, bpa=-0.1815 degrees ! Estimated noise=0.430684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298535 Jy ! Component: 100 - total flux cleaned = 0.000425361 Jy ! Component: 150 - total flux cleaned = 0.000465492 Jy ! Component: 200 - total flux cleaned = 0.000464967 Jy ! Total flux subtracted in 200 components = 0.000464967 Jy ! Clean residual min=-0.002640 max=0.002075 Jy/beam ! Clean residual mean=-0.000004 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.127908 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 90 components and 0.127908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153275Jy sigma=0.680463 ! Fit after self-cal, rms=0.153278Jy sigma=0.680439 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.31539e-05 Jy ! Component: 100 - total flux cleaned = 0.000160447 Jy ! Component: 150 - total flux cleaned = 0.000196725 Jy ! Component: 200 - total flux cleaned = 0.000197443 Jy ! Total flux subtracted in 200 components = 0.000197443 Jy ! Clean residual min=-0.002649 max=0.002036 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.128105 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 94 components and 0.128105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153254Jy sigma=0.680302 ! Fit after self-cal, rms=0.153256Jy sigma=0.680295 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153256Jy sigma=0.680295 ! Fit after self-cal, rms=0.153250Jy sigma=0.680292 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.928 mas, bmaj=10.96 mas, bpa=-73.28 degrees ! Estimated noise=0.524647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000978094 Jy ! Component: 100 - total flux cleaned = 0.00127437 Jy ! Component: 150 - total flux cleaned = 0.00142484 Jy ! Component: 200 - total flux cleaned = 0.0015557 Jy ! Total flux subtracted in 200 components = 0.0015557 Jy ! Clean residual min=-0.002355 max=0.002177 Jy/beam ! Clean residual mean=-0.000003 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.129661 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 0.129661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153251Jy sigma=0.680267 ! Fit after self-cal, rms=0.153226Jy sigma=0.680133 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320181 Jy ! Component: 100 - total flux cleaned = 0.000422813 Jy ! Component: 150 - total flux cleaned = 0.000509741 Jy ! Component: 200 - total flux cleaned = 0.000575596 Jy ! Total flux subtracted in 200 components = 0.000575596 Jy ! Clean residual min=-0.002294 max=0.002066 Jy/beam ! Clean residual mean=-0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.130236 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 0.130236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153229Jy sigma=0.680157 ! Fit after self-cal, rms=0.153226Jy sigma=0.680150 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=4.903 mas, bpa=-0.17 degrees ! Estimated noise=0.430703 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.375 x 4.903 at -0.17 degrees (North through East) ! Clean map min=-0.0042562 max=0.090379 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.633 mas, bmaj=4.007 mas, bpa=-1.985 degrees ! Estimated noise=0.895779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580525 Jy ! Component: 100 - total flux cleaned = 0.079042 Jy ! Component: 150 - total flux cleaned = 0.0931789 Jy ! Component: 200 - total flux cleaned = 0.100855 Jy ! Total flux subtracted in 200 components = 0.100855 Jy ! Clean residual min=-0.006309 max=0.007789 Jy/beam ! Clean residual mean=-0.000004 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.100855 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.100855 Jy ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=4.903 mas, bpa=-0.17 degrees ! Estimated noise=0.430703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141933 Jy ! Component: 100 - total flux cleaned = 0.019789 Jy ! Component: 150 - total flux cleaned = 0.0220722 Jy ! Component: 200 - total flux cleaned = 0.0234891 Jy ! Total flux subtracted in 200 components = 0.0234891 Jy ! Clean residual min=-0.003159 max=0.003233 Jy/beam ! Clean residual mean=-0.000010 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.124344 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.124344 Jy ! Inverting map ! Added new window around map position (-27, 54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152726 Jy ! Component: 100 - total flux cleaned = 0.00189676 Jy ! Component: 150 - total flux cleaned = 0.00223168 Jy ! Component: 200 - total flux cleaned = 0.00263275 Jy ! Total flux subtracted in 200 components = 0.00263275 Jy ! Clean residual min=-0.002545 max=0.002469 Jy/beam ! Clean residual mean=-0.000007 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.126976 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 60 components and 0.126976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.928 mas, bmaj=10.96 mas, bpa=-73.28 degrees ! Estimated noise=0.524647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251487 Jy ! Component: 100 - total flux cleaned = 0.0039286 Jy ! Component: 150 - total flux cleaned = 0.00474306 Jy ! Component: 200 - total flux cleaned = 0.00494078 Jy ! Total flux subtracted in 200 components = 0.00494078 Jy ! Clean residual min=-0.002122 max=0.002242 Jy/beam ! Clean residual mean=-0.000003 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.131917 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114376 Jy ! Component: 100 - total flux cleaned = 0.00019261 Jy ! Component: 150 - total flux cleaned = 0.000265013 Jy ! Component: 200 - total flux cleaned = 0.000332679 Jy ! Total flux subtracted in 200 components = 0.000332679 Jy ! Clean residual min=-0.002078 max=0.002147 Jy/beam ! Clean residual mean=-0.000001 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.13225 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 112 components and 0.13225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=4.903 mas, bpa=-0.17 degrees ! Estimated noise=0.430703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116996 Jy ! Component: 100 - total flux cleaned = -0.00134455 Jy ! Component: 150 - total flux cleaned = -0.0014274 Jy ! Component: 200 - total flux cleaned = -0.0015011 Jy ! Total flux subtracted in 200 components = -0.0015011 Jy ! Clean residual min=-0.002518 max=0.002155 Jy/beam ! Clean residual mean=-0.000002 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.130749 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 122 components and 0.130749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153306Jy sigma=0.681169 ! Fit after self-cal, rms=0.153252Jy sigma=0.680968 wmodel ./J1314+2348_S_map.mod ! Writing 122 model components to file: ./J1314+2348_S_map.mod wobs ./J1314+2348_S_uvs.fits ! Writing UV FITS file: ./J1314+2348_S_uvs.fits wwins ./J1314+2348_S_map.win ! wwins: Wrote 7 windows to ./J1314+2348_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113097 Jy ! Component: 100 - total flux cleaned = -0.00160751 Jy ! Component: 150 - total flux cleaned = -0.00186981 Jy ! Component: 200 - total flux cleaned = -0.00190609 Jy ! Component: 250 - total flux cleaned = -0.00190626 Jy ! Component: 300 - total flux cleaned = -0.0019063 Jy ! Component: 350 - total flux cleaned = -0.00183909 Jy ! Component: 400 - total flux cleaned = -0.00187209 Jy ! Component: 450 - total flux cleaned = -0.0018394 Jy ! Component: 500 - total flux cleaned = -0.00180784 Jy ! Component: 550 - total flux cleaned = -0.00171324 Jy ! Component: 600 - total flux cleaned = -0.00155781 Jy ! Component: 650 - total flux cleaned = -0.00146513 Jy ! Component: 700 - total flux cleaned = -0.00128303 Jy ! Component: 750 - total flux cleaned = -0.00119277 Jy ! Component: 800 - total flux cleaned = -0.00113301 Jy ! Component: 850 - total flux cleaned = -0.000867902 Jy ! Component: 900 - total flux cleaned = -0.000809673 Jy ! Component: 950 - total flux cleaned = -0.000636138 Jy ! Component: 1000 - total flux cleaned = -0.000464717 Jy ! Component: 1050 - total flux cleaned = -0.000351724 Jy ! Component: 1100 - total flux cleaned = -0.000238995 Jy ! Component: 1150 - total flux cleaned = -4.42046e-05 Jy ! Component: 1200 - total flux cleaned = 6.64016e-05 Jy ! Component: 1250 - total flux cleaned = 0.000176132 Jy ! Component: 1300 - total flux cleaned = 0.000339001 Jy ! Component: 1350 - total flux cleaned = 0.000446679 Jy ! Component: 1400 - total flux cleaned = 0.000526925 Jy ! Component: 1450 - total flux cleaned = 0.000686134 Jy ! Component: 1500 - total flux cleaned = 0.000738997 Jy ! Component: 1550 - total flux cleaned = 0.00100073 Jy ! Component: 1600 - total flux cleaned = 0.00110465 Jy ! Component: 1650 - total flux cleaned = 0.0010787 Jy ! Component: 1700 - total flux cleaned = 0.00130967 Jy ! Component: 1750 - total flux cleaned = 0.00133504 Jy ! Component: 1800 - total flux cleaned = 0.00148703 Jy ! Component: 1850 - total flux cleaned = 0.00156243 Jy ! Component: 1900 - total flux cleaned = 0.00163742 Jy ! Component: 1950 - total flux cleaned = 0.0017367 Jy ! Component: 2000 - total flux cleaned = 0.00178602 Jy ! Component: 2050 - total flux cleaned = 0.00195831 Jy ! Component: 2100 - total flux cleaned = 0.00200744 Jy ! Component: 2150 - total flux cleaned = 0.00210486 Jy ! Component: 2200 - total flux cleaned = 0.0021535 Jy ! Component: 2250 - total flux cleaned = 0.00227374 Jy ! Component: 2300 - total flux cleaned = 0.00246509 Jy ! Component: 2350 - total flux cleaned = 0.00244123 Jy ! Component: 2400 - total flux cleaned = 0.00258331 Jy ! Component: 2450 - total flux cleaned = 0.00265399 Jy ! Component: 2500 - total flux cleaned = 0.00263065 Jy ! Component: 2550 - total flux cleaned = 0.00279401 Jy ! Component: 2600 - total flux cleaned = 0.0027709 Jy ! Component: 2650 - total flux cleaned = 0.00293264 Jy ! Component: 2700 - total flux cleaned = 0.00300161 Jy ! Component: 2750 - total flux cleaned = 0.00309322 Jy ! Component: 2800 - total flux cleaned = 0.00316156 Jy ! Component: 2850 - total flux cleaned = 0.00316138 Jy ! Component: 2900 - total flux cleaned = 0.00322915 Jy ! Component: 2950 - total flux cleaned = 0.00329634 Jy ! Component: 3000 - total flux cleaned = 0.00345284 Jy ! Component: 3050 - total flux cleaned = 0.00347504 Jy ! Component: 3100 - total flux cleaned = 0.00363014 Jy ! Component: 3150 - total flux cleaned = 0.00358608 Jy ! Component: 3200 - total flux cleaned = 0.00369575 Jy ! Component: 3250 - total flux cleaned = 0.00387053 Jy ! Component: 3300 - total flux cleaned = 0.00389225 Jy ! Component: 3350 - total flux cleaned = 0.00402225 Jy ! Component: 3400 - total flux cleaned = 0.00406514 Jy ! Component: 3450 - total flux cleaned = 0.00417244 Jy ! Component: 3500 - total flux cleaned = 0.00417242 Jy ! Component: 3550 - total flux cleaned = 0.00425753 Jy ! Component: 3600 - total flux cleaned = 0.00423632 Jy ! Component: 3650 - total flux cleaned = 0.00438431 Jy ! Component: 3700 - total flux cleaned = 0.00444737 Jy ! Component: 3750 - total flux cleaned = 0.00457304 Jy ! Component: 3800 - total flux cleaned = 0.0045939 Jy ! Component: 3850 - total flux cleaned = 0.00467686 Jy ! Component: 3900 - total flux cleaned = 0.00478029 Jy ! Component: 3950 - total flux cleaned = 0.00480086 Jy ! Component: 4000 - total flux cleaned = 0.0048625 Jy ! Component: 4050 - total flux cleaned = 0.00498532 Jy ! Total flux subtracted in 4096 components = 0.00510753 Jy ! Clean residual min=-0.001020 max=0.001108 Jy/beam ! Clean residual mean=0.000000 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.135856 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 430 components and 0.135856 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "./J1314+2348_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.375 x 4.903 at -0.17 degrees (North through East) ! Clean map min=-0.0032679 max=0.089957 Jy/beam ! Writing clean map to FITS file: ./J1314+2348_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.089957 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000352441 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.17537 1.17537 2.35073 4.70146 9.40293 18.8059 37.6117 75.2234 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.089 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 255.239 quit ! Quitting program ! Log file ./J1314+2348_S_uvs.log closed on Sat Jan 2 09:55:07 2016