! Started logfile: ./J1245+5709_S_uvs.log on Sat Jan 2 09:54:15 2016 obs J1245+5709_S_uva.fits ! Reading UV FITS file: J1245+5709_S_uva.fits ! AN table 1: 117 integrations on 55 of 55 possible baselines. ! AN table 2: 58 integrations on 45 of 45 possible baselines. ! AN table 3: 59 integrations on 78 of 78 possible baselines. ! AN table 4: 58 integrations on 3 of 3 possible baselines. ! AN table 5: 59 integrations on 36 of 36 possible baselines. ! AN table 6: 59 integrations on 55 of 55 possible baselines. ! AN table 7: 58 integrations on 6 of 6 possible baselines. ! AN table 8: 55 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.817033 visibilities/baseline/integration-bin. ! Found source: J1245+5709 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 128784 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet ./J1245+5709_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 215 telescope corrections were flagged in sub-array 1. ! A total of 100 telescope corrections were flagged in sub-array 2. ! A total of 114 telescope corrections were flagged in sub-array 3. ! A total of 174 telescope corrections were flagged in sub-array 4. ! A total of 111 telescope corrections were flagged in sub-array 5. ! A total of 112 telescope corrections were flagged in sub-array 6. ! A total of 165 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! A total of 100 telescope corrections were flagged in sub-array 2. ! A total of 114 telescope corrections were flagged in sub-array 3. ! A total of 174 telescope corrections were flagged in sub-array 4. ! A total of 111 telescope corrections were flagged in sub-array 5. ! A total of 112 telescope corrections were flagged in sub-array 6. ! A total of 165 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 331 telescope corrections were flagged in sub-array 1. ! A total of 158 telescope corrections were flagged in sub-array 2. ! A total of 172 telescope corrections were flagged in sub-array 3. ! A total of 174 telescope corrections were flagged in sub-array 4. ! A total of 111 telescope corrections were flagged in sub-array 5. ! A total of 112 telescope corrections were flagged in sub-array 6. ! A total of 58 telescope corrections were flagged in sub-array 7. ! A total of 165 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 331 telescope corrections were flagged in sub-array 1. ! A total of 158 telescope corrections were flagged in sub-array 2. ! A total of 172 telescope corrections were flagged in sub-array 3. ! A total of 174 telescope corrections were flagged in sub-array 4. ! A total of 111 telescope corrections were flagged in sub-array 5. ! A total of 112 telescope corrections were flagged in sub-array 6. ! A total of 58 telescope corrections were flagged in sub-array 7. ! A total of 165 telescope corrections were flagged in sub-array 8. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 331 telescope corrections were flagged in sub-array 1. ! A total of 158 telescope corrections were flagged in sub-array 2. ! A total of 172 telescope corrections were flagged in sub-array 3. ! A total of 174 telescope corrections were flagged in sub-array 4. ! A total of 169 telescope corrections were flagged in sub-array 5. ! A total of 170 telescope corrections were flagged in sub-array 6. ! A total of 165 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 361 telescope corrections were flagged in sub-array 1. ! A total of 174 telescope corrections were flagged in sub-array 2. ! A total of 187 telescope corrections were flagged in sub-array 3. ! A total of 174 telescope corrections were flagged in sub-array 4. ! A total of 183 telescope corrections were flagged in sub-array 5. ! A total of 185 telescope corrections were flagged in sub-array 6. ! A total of 165 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 303 telescope corrections were flagged in sub-array 1. ! A total of 117 telescope corrections were flagged in sub-array 2. ! A total of 187 telescope corrections were flagged in sub-array 3. ! A total of 174 telescope corrections were flagged in sub-array 4. ! A total of 183 telescope corrections were flagged in sub-array 5. ! A total of 185 telescope corrections were flagged in sub-array 6. ! A total of 165 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.015720Jy sigma=7.661902 ! Fit after self-cal, rms=0.918805Jy sigma=7.062536 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.782 mas, bmaj=3.098 mas, bpa=5.449 degrees ! Estimated noise=0.811045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552756 Jy ! Component: 100 - total flux cleaned = 0.0706757 Jy ! Total flux subtracted in 100 components = 0.0706757 Jy ! Clean residual min=-0.005776 max=0.007320 Jy/beam ! Clean residual mean=-0.000011 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.0706757 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0706757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.146853Jy sigma=0.739898 ! Fit after self-cal, rms=0.145956Jy sigma=0.731990 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968528 Jy ! Component: 100 - total flux cleaned = 0.0157259 Jy ! Total flux subtracted in 100 components = 0.0157259 Jy ! Clean residual min=-0.006316 max=0.006602 Jy/beam ! Clean residual mean=-0.000006 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.0864016 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.0864016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.144366Jy sigma=0.716811 ! Fit after self-cal, rms=0.144357Jy sigma=0.716566 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=3.786 mas, bpa=7.826 degrees ! Estimated noise=0.386278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113006 Jy ! Component: 100 - total flux cleaned = 0.0163477 Jy ! Component: 150 - total flux cleaned = 0.0188795 Jy ! Component: 200 - total flux cleaned = 0.020172 Jy ! Total flux subtracted in 200 components = 0.020172 Jy ! Clean residual min=-0.003123 max=0.003554 Jy/beam ! Clean residual mean=-0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.106574 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.106574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.143278Jy sigma=0.714113 ! Fit after self-cal, rms=0.143271Jy sigma=0.713804 ! Inverting map ! Added new window around map position (18.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899293 Jy ! Component: 100 - total flux cleaned = 0.00165606 Jy ! Component: 150 - total flux cleaned = 0.00232665 Jy ! Component: 200 - total flux cleaned = 0.00266953 Jy ! Total flux subtracted in 200 components = 0.00266953 Jy ! Clean residual min=-0.002943 max=0.003225 Jy/beam ! Clean residual mean=-0.000000 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.109243 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.109243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.143133Jy sigma=0.710953 ! Fit after self-cal, rms=0.143055Jy sigma=0.710640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.59 x 3.786 at 7.826 degrees (North through East) ! Clean map min=-0.0044094 max=0.087267 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* LA 1.00* MC 1.00* ! NL 1.00* ON 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* KP 1.00* MK 1.00* OV 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! EF 0.00* MC 0.00* ZC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* LA 1.00* MC 1.00* ! NL 1.00* ON 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.86 KP 0.90 MK 1.03 OV 0.99 ! ! Telescope amplitude corrections in sub-array 8: ! EF 0.00* MC 0.00* ZC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* LA 1.00* MC 1.00* ! NL 1.00* ON 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 174 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! EF 0.00* MC 0.00* ZC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* LA 1.00* MC 1.00* ! NL 1.00* ON 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 174 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* KP 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! EF 0.00* MC 0.00* ZC 0.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* LA 1.00* MC 1.00* ! NL 1.00* ON 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* KP 1.00* MK 1.00* OV 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! EF 0.00* MC 0.00* ZC 0.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 EF 1.00* FD 1.06 KP 0.88 ! LA 0.97 MC 1.00* NL 1.04 OV 0.93 ! PT 1.00 SC 1.05 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* LA 1.00* MC 1.00* ! NL 1.00* ON 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* KP 1.00* MK 1.00* OV 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! EF 0.00* MC 0.00* ZC 0.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* LA 1.00* MC 1.00* ! NL 1.00* ON 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* KP 1.00* MK 1.00* OV 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! EF 0.00* MC 0.00* ZC 0.00* ! ! ! Fit before self-cal, rms=0.143055Jy sigma=0.710640 ! Fit after self-cal, rms=0.143235Jy sigma=0.711193 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=3.79 mas, bpa=7.72 degrees ! Estimated noise=0.387045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177904 Jy ! Component: 100 - total flux cleaned = 0.00196449 Jy ! Component: 150 - total flux cleaned = 0.00204863 Jy ! Component: 200 - total flux cleaned = 0.00205095 Jy ! Total flux subtracted in 200 components = 0.00205095 Jy ! Clean residual min=-0.002777 max=0.002853 Jy/beam ! Clean residual mean=0.000001 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.111294 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.111294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.143145Jy sigma=0.709108 ! Fit after self-cal, rms=0.143124Jy sigma=0.708917 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.143124Jy sigma=0.708917 ! Fit after self-cal, rms=0.142831Jy sigma=0.708750 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=3.789 mas, bpa=7.705 degrees ! Estimated noise=0.38634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288389 Jy ! Component: 100 - total flux cleaned = 0.000291603 Jy ! Component: 150 - total flux cleaned = 0.000291618 Jy ! Component: 200 - total flux cleaned = 0.000292333 Jy ! Total flux subtracted in 200 components = 0.000292333 Jy ! Clean residual min=-0.002700 max=0.002787 Jy/beam ! Clean residual mean=0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.111586 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 65 components and 0.111586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142773Jy sigma=0.707502 ! Fit after self-cal, rms=0.142743Jy sigma=0.707319 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, -76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192538 Jy ! Component: 100 - total flux cleaned = 0.00227205 Jy ! Component: 150 - total flux cleaned = 0.00246593 Jy ! Component: 200 - total flux cleaned = 0.00258941 Jy ! Total flux subtracted in 200 components = 0.00258941 Jy ! Clean residual min=-0.002623 max=0.002590 Jy/beam ! Clean residual mean=0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.114176 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 74 components and 0.114176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142678Jy sigma=0.706090 ! Fit after self-cal, rms=0.142661Jy sigma=0.706031 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142661Jy sigma=0.706031 ! Fit after self-cal, rms=0.142513Jy sigma=0.705935 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=3.794 mas, bpa=7.675 degrees ! Estimated noise=0.385861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551042 Jy ! Component: 100 - total flux cleaned = 0.000732853 Jy ! Component: 150 - total flux cleaned = 0.00079034 Jy ! Component: 200 - total flux cleaned = 0.00089838 Jy ! Total flux subtracted in 200 components = 0.00089838 Jy ! Clean residual min=-0.002478 max=0.002284 Jy/beam ! Clean residual mean=0.000001 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.115074 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 79 components and 0.115074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142470Jy sigma=0.705091 ! Fit after self-cal, rms=0.142453Jy sigma=0.705048 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303688 Jy ! Component: 100 - total flux cleaned = 0.000357319 Jy ! Component: 150 - total flux cleaned = 0.00040854 Jy ! Component: 200 - total flux cleaned = 0.000457976 Jy ! Total flux subtracted in 200 components = 0.000457976 Jy ! Clean residual min=-0.002442 max=0.002260 Jy/beam ! Clean residual mean=0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.115532 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 82 components and 0.115532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142417Jy sigma=0.704425 ! Fit after self-cal, rms=0.142411Jy sigma=0.704416 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142411Jy sigma=0.704416 ! Fit after self-cal, rms=0.142429Jy sigma=0.704416 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.482 mas, bmaj=11.68 mas, bpa=80.78 degrees ! Estimated noise=0.503072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920746 Jy ! Component: 100 - total flux cleaned = 0.00143484 Jy ! Component: 150 - total flux cleaned = 0.00150345 Jy ! Component: 200 - total flux cleaned = 0.00151861 Jy ! Total flux subtracted in 200 components = 0.00151861 Jy ! Clean residual min=-0.002451 max=0.002531 Jy/beam ! Clean residual mean=0.000003 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.117051 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 93 components and 0.117051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142429Jy sigma=0.704413 ! Fit after self-cal, rms=0.142425Jy sigma=0.704387 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398609 Jy ! Component: 100 - total flux cleaned = 0.000460831 Jy ! Component: 150 - total flux cleaned = 0.000501282 Jy ! Component: 200 - total flux cleaned = 0.000513328 Jy ! Total flux subtracted in 200 components = 0.000513328 Jy ! Clean residual min=-0.002426 max=0.002454 Jy/beam ! Clean residual mean=0.000004 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.117564 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.117564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142427Jy sigma=0.704382 ! Fit after self-cal, rms=0.142426Jy sigma=0.704380 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=3.795 mas, bpa=7.67 degrees ! Estimated noise=0.385909 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 3.795 at 7.67 degrees (North through East) ! Clean map min=-0.0061996 max=0.0865 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.781 mas, bmaj=3.101 mas, bpa=5.423 degrees ! Estimated noise=0.81025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550367 Jy ! Component: 100 - total flux cleaned = 0.071806 Jy ! Component: 150 - total flux cleaned = 0.0801814 Jy ! Component: 200 - total flux cleaned = 0.086607 Jy ! Total flux subtracted in 200 components = 0.086607 Jy ! Clean residual min=-0.005643 max=0.005884 Jy/beam ! Clean residual mean=-0.000007 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.086607 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.086607 Jy ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=3.795 mas, bpa=7.67 degrees ! Estimated noise=0.385909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137566 Jy ! Component: 100 - total flux cleaned = 0.0196531 Jy ! Component: 150 - total flux cleaned = 0.021881 Jy ! Component: 200 - total flux cleaned = 0.0236678 Jy ! Total flux subtracted in 200 components = 0.0236678 Jy ! Clean residual min=-0.002611 max=0.002796 Jy/beam ! Clean residual mean=-0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.110275 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.110275 Jy ! Inverting map ! Added new window around map position (8.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016054 Jy ! Component: 100 - total flux cleaned = 0.00214213 Jy ! Component: 150 - total flux cleaned = 0.00253101 Jy ! Component: 200 - total flux cleaned = 0.00298146 Jy ! Total flux subtracted in 200 components = 0.00298146 Jy ! Clean residual min=-0.002499 max=0.002500 Jy/beam ! Clean residual mean=-0.000001 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.113256 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 0.113256 Jy ! Inverting map ! Added new window around map position (-29, -32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149909 Jy ! Component: 100 - total flux cleaned = 0.00182736 Jy ! Component: 150 - total flux cleaned = 0.00213776 Jy ! Component: 200 - total flux cleaned = 0.00228795 Jy ! Total flux subtracted in 200 components = 0.00228795 Jy ! Clean residual min=-0.002416 max=0.002395 Jy/beam ! Clean residual mean=-0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.115544 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 72 components and 0.115544 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.482 mas, bmaj=11.68 mas, bpa=80.78 degrees ! Estimated noise=0.503072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195608 Jy ! Component: 100 - total flux cleaned = 0.00307903 Jy ! Component: 150 - total flux cleaned = 0.00360318 Jy ! Component: 200 - total flux cleaned = 0.00388773 Jy ! Total flux subtracted in 200 components = 0.00388773 Jy ! Clean residual min=-0.002431 max=0.002511 Jy/beam ! Clean residual mean=-0.000001 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.119432 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.75666e-05 Jy ! Component: 100 - total flux cleaned = 0.000144908 Jy ! Component: 150 - total flux cleaned = 0.000196734 Jy ! Component: 200 - total flux cleaned = 0.000212689 Jy ! Total flux subtracted in 200 components = 0.000212689 Jy ! Clean residual min=-0.002413 max=0.002517 Jy/beam ! Clean residual mean=-0.000001 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.119645 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 104 components and 0.119645 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=3.795 mas, bpa=7.67 degrees ! Estimated noise=0.385909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010694 Jy ! Component: 100 - total flux cleaned = -0.00141738 Jy ! Component: 150 - total flux cleaned = -0.00148103 Jy ! Component: 200 - total flux cleaned = -0.00147939 Jy ! Total flux subtracted in 200 components = -0.00147939 Jy ! Clean residual min=-0.002375 max=0.002278 Jy/beam ! Clean residual mean=-0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.118165 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 117 components and 0.118165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.142475Jy sigma=0.703863 ! Fit after self-cal, rms=0.142480Jy sigma=0.703752 wmodel ./J1245+5709_S_map.mod ! Writing 117 model components to file: ./J1245+5709_S_map.mod wobs ./J1245+5709_S_uvs.fits ! Writing UV FITS file: ./J1245+5709_S_uvs.fits wwins ./J1245+5709_S_map.win ! wwins: Wrote 6 windows to ./J1245+5709_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001465 Jy ! Component: 100 - total flux cleaned = 6.13438e-05 Jy ! Component: 150 - total flux cleaned = 0.000340499 Jy ! Component: 200 - total flux cleaned = 0.000649967 Jy ! Component: 250 - total flux cleaned = 0.000876605 Jy ! Component: 300 - total flux cleaned = 0.00113624 Jy ! Component: 350 - total flux cleaned = 0.00131871 Jy ! Component: 400 - total flux cleaned = 0.00153365 Jy ! Component: 450 - total flux cleaned = 0.00174495 Jy ! Component: 500 - total flux cleaned = 0.00191855 Jy ! Component: 550 - total flux cleaned = 0.00209011 Jy ! Component: 600 - total flux cleaned = 0.00229348 Jy ! Component: 650 - total flux cleaned = 0.00252686 Jy ! Component: 700 - total flux cleaned = 0.00269114 Jy ! Component: 750 - total flux cleaned = 0.00288721 Jy ! Component: 800 - total flux cleaned = 0.00314489 Jy ! Component: 850 - total flux cleaned = 0.00327242 Jy ! Component: 900 - total flux cleaned = 0.00349385 Jy ! Component: 950 - total flux cleaned = 0.00358744 Jy ! Component: 1000 - total flux cleaned = 0.0038051 Jy ! Component: 1050 - total flux cleaned = 0.00389719 Jy ! Component: 1100 - total flux cleaned = 0.00395846 Jy ! Component: 1150 - total flux cleaned = 0.00420084 Jy ! Component: 1200 - total flux cleaned = 0.00435109 Jy ! Component: 1250 - total flux cleaned = 0.00444041 Jy ! Component: 1300 - total flux cleaned = 0.00458847 Jy ! Component: 1350 - total flux cleaned = 0.00467664 Jy ! Component: 1400 - total flux cleaned = 0.00485168 Jy ! Component: 1450 - total flux cleaned = 0.00493835 Jy ! Component: 1500 - total flux cleaned = 0.00502469 Jy ! Component: 1550 - total flux cleaned = 0.00519558 Jy ! Component: 1600 - total flux cleaned = 0.00519561 Jy ! Component: 1650 - total flux cleaned = 0.00536476 Jy ! Component: 1700 - total flux cleaned = 0.00547675 Jy ! Component: 1750 - total flux cleaned = 0.00553223 Jy ! Component: 1800 - total flux cleaned = 0.0057257 Jy ! Component: 1850 - total flux cleaned = 0.00586258 Jy ! Component: 1900 - total flux cleaned = 0.00588959 Jy ! Component: 1950 - total flux cleaned = 0.00594399 Jy ! Component: 2000 - total flux cleaned = 0.00610542 Jy ! Component: 2050 - total flux cleaned = 0.00610554 Jy ! Component: 2100 - total flux cleaned = 0.00623845 Jy ! Component: 2150 - total flux cleaned = 0.00639699 Jy ! Component: 2200 - total flux cleaned = 0.006371 Jy ! Component: 2250 - total flux cleaned = 0.0065278 Jy ! Component: 2300 - total flux cleaned = 0.00668329 Jy ! Component: 2350 - total flux cleaned = 0.00663199 Jy ! Component: 2400 - total flux cleaned = 0.00681175 Jy ! Component: 2450 - total flux cleaned = 0.00688828 Jy ! Component: 2500 - total flux cleaned = 0.0069387 Jy ! Component: 2550 - total flux cleaned = 0.00703978 Jy ! Component: 2600 - total flux cleaned = 0.00703952 Jy ! Component: 2650 - total flux cleaned = 0.00716451 Jy ! Component: 2700 - total flux cleaned = 0.00718931 Jy ! Component: 2750 - total flux cleaned = 0.00713981 Jy ! Component: 2800 - total flux cleaned = 0.00723821 Jy ! Component: 2850 - total flux cleaned = 0.00731208 Jy ! Component: 2900 - total flux cleaned = 0.0073364 Jy ! Component: 2950 - total flux cleaned = 0.00736076 Jy ! Component: 3000 - total flux cleaned = 0.00752982 Jy ! Component: 3050 - total flux cleaned = 0.00752975 Jy ! Component: 3100 - total flux cleaned = 0.00757741 Jy ! Component: 3150 - total flux cleaned = 0.00757739 Jy ! Component: 3200 - total flux cleaned = 0.0076486 Jy ! Component: 3250 - total flux cleaned = 0.0076959 Jy ! Component: 3300 - total flux cleaned = 0.00774309 Jy ! Component: 3350 - total flux cleaned = 0.00783651 Jy ! Component: 3400 - total flux cleaned = 0.0079297 Jy ! Component: 3450 - total flux cleaned = 0.00795286 Jy ! Component: 3500 - total flux cleaned = 0.00799905 Jy ! Component: 3550 - total flux cleaned = 0.00815987 Jy ! Component: 3600 - total flux cleaned = 0.00816011 Jy ! Component: 3650 - total flux cleaned = 0.00827379 Jy ! Component: 3700 - total flux cleaned = 0.00838712 Jy ! Component: 3750 - total flux cleaned = 0.00836455 Jy ! Component: 3800 - total flux cleaned = 0.00840978 Jy ! Component: 3850 - total flux cleaned = 0.0085662 Jy ! Component: 3900 - total flux cleaned = 0.00867742 Jy ! Component: 3950 - total flux cleaned = 0.0085666 Jy ! Component: 4000 - total flux cleaned = 0.00863285 Jy ! Component: 4050 - total flux cleaned = 0.00876467 Jy ! Total flux subtracted in 4096 components = 0.00883043 Jy ! Clean residual min=-0.001139 max=0.001250 Jy/beam ! Clean residual mean=-0.000008 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.126996 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 413 components and 0.126996 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "./J1245+5709_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 3.795 at 7.67 degrees (North through East) ! Clean map min=-0.0055878 max=0.085928 Jy/beam ! Writing clean map to FITS file: ./J1245+5709_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0859276 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000379971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.3266 1.3266 2.65319 5.30639 10.6128 21.2255 42.4511 84.9022 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.085 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 226.142 quit ! Quitting program ! Log file ./J1245+5709_S_uvs.log closed on Sat Jan 2 09:54:25 2016