! Started logfile: /scr/pima/gb073_uvs/J1222+0413_X_uvs.log on Sat Dec 26 09:38:21 2015 obs /scr/pima/gb073_uvs/J1222+0413_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1222+0413_X_uva.fits ! AN table 1: 26 integrations on 55 of 55 possible baselines. ! AN table 2: 22 integrations on 55 of 55 possible baselines. ! AN table 3: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.746501 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 18776 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1222+0413_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 94 telescope corrections were flagged in sub-array 1. ! A total of 70 telescope corrections were flagged in sub-array 2. ! A total of 52 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 94 telescope corrections were flagged in sub-array 1. ! A total of 70 telescope corrections were flagged in sub-array 2. ! A total of 52 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 62 telescope corrections were flagged in sub-array 1. ! A total of 46 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.233587Jy sigma=10.762253 ! Fit after self-cal, rms=0.345908Jy sigma=2.764539 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.19% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.513 mas, bmaj=1.701 mas, bpa=-7.195 degrees ! Estimated noise=1.29006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.530133 Jy ! Component: 100 - total flux cleaned = 0.650371 Jy ! Total flux subtracted in 100 components = 0.650371 Jy ! Clean residual min=-0.022156 max=0.044353 Jy/beam ! Clean residual mean=0.000009 rms=0.005027 Jy/beam ! Combined flux in latest and established models = 0.650371 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.650371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.183109Jy sigma=1.242371 ! Fit after self-cal, rms=0.183099Jy sigma=1.242310 ! Inverting map ! Your choice of large map pixels excluded 5.19% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456142 Jy ! Component: 100 - total flux cleaned = 0.0680324 Jy ! Total flux subtracted in 100 components = 0.0680324 Jy ! Clean residual min=-0.020344 max=0.024792 Jy/beam ! Clean residual mean=0.000003 rms=0.004051 Jy/beam ! Combined flux in latest and established models = 0.718404 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.718404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.172599Jy sigma=1.076004 ! Fit after self-cal, rms=0.172568Jy sigma=1.075809 ! Inverting map ! Your choice of large map pixels excluded 5.19% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Added new window around map position (-10.4, 12.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00919773 Jy ! Component: 100 - total flux cleaned = 0.0143938 Jy ! Total flux subtracted in 100 components = 0.0143938 Jy ! Clean residual min=-0.019006 max=0.023404 Jy/beam ! Clean residual mean=0.000003 rms=0.003815 Jy/beam ! Combined flux in latest and established models = 0.732797 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.732797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.170713Jy sigma=1.052246 ! Fit after self-cal, rms=0.170561Jy sigma=1.050717 ! Inverting map ! Your choice of large map pixels excluded 5.19% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.19% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6052 mas, bmaj=1.947 mas, bpa=-6.944 degrees ! Estimated noise=0.673348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179379 Jy ! Component: 100 - total flux cleaned = 0.0245078 Jy ! Component: 150 - total flux cleaned = 0.0265028 Jy ! Component: 200 - total flux cleaned = 0.0275161 Jy ! Total flux subtracted in 200 components = 0.0275161 Jy ! Clean residual min=-0.017307 max=0.015188 Jy/beam ! Clean residual mean=0.000010 rms=0.003047 Jy/beam ! Combined flux in latest and established models = 0.760313 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.760313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.168132Jy sigma=1.030532 ! Fit after self-cal, rms=0.167908Jy sigma=1.027762 ! Inverting map ! Your choice of large map pixels excluded 5.19% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6052 x 1.947 at -6.944 degrees (North through East) ! Clean map min=-0.013192 max=0.6874 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 EF 1.00* FD 0.98 KP 0.98 ! LA 1.05 MC 0.94 NL 0.94 ON 1.00 ! OV 1.00 PT 0.97 SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.98 KP 0.98 LA 1.03 ! MK 0.97 NL 0.93 PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 EF 1.00* FD 1.03 KP 1.00 ! LA 1.07 MC 0.96 NL 0.97 ON 1.01 ! OV 1.03 PT 1.02 SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 KP 1.01 LA 1.05 ! MK 1.00 NL 0.95 PT 1.02 SC 1.01 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 EF 1.00* FD 1.01 KP 0.94 ! LA 0.99 MC 0.92 NL 0.95 ON 0.96 ! OV 0.99 PT 1.00 SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 KP 0.96 LA 0.97 ! MK 0.96 NL 0.92 PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 EF 1.00* FD 1.03 KP 0.96 ! LA 1.03 MC 0.94 NL 0.98 ON 0.99 ! OV 1.00 PT 1.01 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 KP 0.98 LA 0.99 ! MK 0.96 NL 0.94 PT 1.02 SC 1.04 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.04 KP 0.90 ! LA 1.01 MC 1.15 NL 0.99 ON 1.16 ! OV 1.04 PT 0.98 SC 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 0.99 KP 0.90 LA 0.99 ! MK 0.95 NL 0.97 PT 0.97 SC 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 0.98 KP 0.87 LA 1.01 ! MK 0.99 NL 0.96 PT 0.96 SC 0.98 ! ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.04 KP 0.92 LA 1.04 ! MK 1.03 NL 1.00 PT 0.99 SC 1.03 ! ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.02 KP 0.90 LA 1.03 ! MK 1.03 NL 0.99 PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.167908Jy sigma=1.027762 ! Fit after self-cal, rms=0.165029Jy sigma=0.989618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6078 mas, bmaj=1.952 mas, bpa=-7.037 degrees ! Estimated noise=0.667422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157517 Jy ! Component: 100 - total flux cleaned = -9.79475e-05 Jy ! Component: 150 - total flux cleaned = -0.000528176 Jy ! Component: 200 - total flux cleaned = -0.000514091 Jy ! Total flux subtracted in 200 components = -0.000514091 Jy ! Clean residual min=-0.014897 max=0.011446 Jy/beam ! Clean residual mean=0.000005 rms=0.002573 Jy/beam ! Combined flux in latest and established models = 0.759799 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.759799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.163544Jy sigma=0.982717 ! Fit after self-cal, rms=0.163506Jy sigma=0.982015 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.163506Jy sigma=0.982015 ! Fit after self-cal, rms=0.163466Jy sigma=0.981812 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6078 mas, bmaj=1.954 mas, bpa=-7.051 degrees ! Estimated noise=0.666639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151468 Jy ! Component: 100 - total flux cleaned = -0.00151532 Jy ! Component: 150 - total flux cleaned = -0.0013454 Jy ! Component: 200 - total flux cleaned = -0.00150164 Jy ! Total flux subtracted in 200 components = -0.00150164 Jy ! Clean residual min=-0.014499 max=0.011326 Jy/beam ! Clean residual mean=0.000005 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 0.758298 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.758298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.162567Jy sigma=0.977933 ! Fit after self-cal, rms=0.162560Jy sigma=0.977633 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386363 Jy ! Component: 100 - total flux cleaned = -0.000389971 Jy ! Component: 150 - total flux cleaned = -0.000525925 Jy ! Component: 200 - total flux cleaned = -0.000521622 Jy ! Total flux subtracted in 200 components = -0.000521622 Jy ! Clean residual min=-0.014268 max=0.011215 Jy/beam ! Clean residual mean=0.000004 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.757776 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.757776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.161933Jy sigma=0.974955 ! Fit after self-cal, rms=0.161935Jy sigma=0.974826 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.161935Jy sigma=0.974826 ! Fit after self-cal, rms=0.161871Jy sigma=0.974586 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6077 mas, bmaj=1.956 mas, bpa=-7.072 degrees ! Estimated noise=0.665788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153435 Jy ! Component: 100 - total flux cleaned = -0.00166533 Jy ! Component: 150 - total flux cleaned = -0.00179111 Jy ! Component: 200 - total flux cleaned = -0.00202943 Jy ! Total flux subtracted in 200 components = -0.00202943 Jy ! Clean residual min=-0.014044 max=0.011156 Jy/beam ! Clean residual mean=0.000004 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.755746 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.755746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.161312Jy sigma=0.972145 ! Fit after self-cal, rms=0.161315Jy sigma=0.972056 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000281758 Jy ! Component: 100 - total flux cleaned = -0.000279128 Jy ! Component: 150 - total flux cleaned = -0.000167318 Jy ! Component: 200 - total flux cleaned = -0.000274388 Jy ! Total flux subtracted in 200 components = -0.000274388 Jy ! Clean residual min=-0.013846 max=0.011028 Jy/beam ! Clean residual mean=0.000004 rms=0.002520 Jy/beam ! Combined flux in latest and established models = 0.755472 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.755472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160923Jy sigma=0.970395 ! Fit after self-cal, rms=0.160925Jy sigma=0.970351 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160925Jy sigma=0.970351 ! Fit after self-cal, rms=0.160871Jy sigma=0.970225 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=2.749 mas, bmaj=3.199 mas, bpa=6.773 degrees ! Estimated noise=0.838502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197569 Jy ! Component: 100 - total flux cleaned = -0.0019728 Jy ! Component: 150 - total flux cleaned = -0.00188795 Jy ! Component: 200 - total flux cleaned = -0.00189162 Jy ! Total flux subtracted in 200 components = -0.00189162 Jy ! Clean residual min=-0.011921 max=0.010769 Jy/beam ! Clean residual mean=0.000008 rms=0.003195 Jy/beam ! Combined flux in latest and established models = 0.753581 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.753581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160738Jy sigma=0.970249 ! Fit after self-cal, rms=0.160732Jy sigma=0.970160 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.12205e-05 Jy ! Component: 100 - total flux cleaned = -5.14746e-06 Jy ! Component: 150 - total flux cleaned = 6.41591e-05 Jy ! Component: 200 - total flux cleaned = 6.53439e-05 Jy ! Total flux subtracted in 200 components = 6.53439e-05 Jy ! Clean residual min=-0.011860 max=0.010743 Jy/beam ! Clean residual mean=0.000008 rms=0.003181 Jy/beam ! Combined flux in latest and established models = 0.753646 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.753646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160663Jy sigma=0.970480 ! Fit after self-cal, rms=0.160659Jy sigma=0.970436 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6077 mas, bmaj=1.957 mas, bpa=-7.088 degrees ! Estimated noise=0.665075 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6077 x 1.957 at -7.088 degrees (North through East) ! Clean map min=-0.0159 max=0.68254 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.160659Jy sigma=0.970436 ! Fit after self-cal, rms=0.159317Jy sigma=0.952237 ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6085 mas, bmaj=1.957 mas, bpa=-7.058 degrees ! Estimated noise=0.66471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000916065 Jy ! Component: 100 - total flux cleaned = -0.00130611 Jy ! Component: 150 - total flux cleaned = -0.00143249 Jy ! Component: 200 - total flux cleaned = -0.00154435 Jy ! Total flux subtracted in 200 components = -0.00154435 Jy ! Clean residual min=-0.013577 max=0.011042 Jy/beam ! Clean residual mean=0.000004 rms=0.002453 Jy/beam ! Combined flux in latest and established models = 0.752102 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.752102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.158969Jy sigma=0.950364 ! Fit after self-cal, rms=0.158961Jy sigma=0.950298 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105874 Jy ! Component: 100 - total flux cleaned = -0.00021002 Jy ! Component: 150 - total flux cleaned = -0.000312006 Jy ! Component: 200 - total flux cleaned = -0.000312035 Jy ! Total flux subtracted in 200 components = -0.000312035 Jy ! Clean residual min=-0.013425 max=0.010798 Jy/beam ! Clean residual mean=0.000004 rms=0.002451 Jy/beam ! Combined flux in latest and established models = 0.75179 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.75179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.158733Jy sigma=0.949284 ! Fit after self-cal, rms=0.158731Jy sigma=0.949259 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.158731Jy sigma=0.949259 ! Fit after self-cal, rms=0.158630Jy sigma=0.948428 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.5167 mas, bmaj=1.707 mas, bpa=-7.294 degrees ! Estimated noise=1.28097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.523597 Jy ! Component: 100 - total flux cleaned = 0.641586 Jy ! Component: 150 - total flux cleaned = 0.688629 Jy ! Component: 200 - total flux cleaned = 0.71362 Jy ! Total flux subtracted in 200 components = 0.71362 Jy ! Clean residual min=-0.019140 max=0.017437 Jy/beam ! Clean residual mean=0.000005 rms=0.003540 Jy/beam ! Combined flux in latest and established models = 0.71362 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.71362 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6087 mas, bmaj=1.958 mas, bpa=-7.066 degrees ! Estimated noise=0.664328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188467 Jy ! Component: 100 - total flux cleaned = 0.0244264 Jy ! Component: 150 - total flux cleaned = 0.0283451 Jy ! Component: 200 - total flux cleaned = 0.0315451 Jy ! Total flux subtracted in 200 components = 0.0315451 Jy ! Clean residual min=-0.014915 max=0.011360 Jy/beam ! Clean residual mean=0.000004 rms=0.002550 Jy/beam ! Combined flux in latest and established models = 0.745165 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.745165 Jy ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=2.75 mas, bmaj=3.201 mas, bpa=6.704 degrees ! Estimated noise=0.835924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159418 Jy ! Component: 100 - total flux cleaned = 0.00285835 Jy ! Component: 150 - total flux cleaned = 0.00385231 Jy ! Component: 200 - total flux cleaned = 0.00462895 Jy ! Total flux subtracted in 200 components = 0.00462895 Jy ! Clean residual min=-0.010988 max=0.010640 Jy/beam ! Clean residual mean=0.000010 rms=0.003045 Jy/beam ! Combined flux in latest and established models = 0.749794 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419206 Jy ! Component: 100 - total flux cleaned = 0.000512209 Jy ! Component: 150 - total flux cleaned = 0.000589528 Jy ! Component: 200 - total flux cleaned = 0.000584393 Jy ! Total flux subtracted in 200 components = 0.000584393 Jy ! Clean residual min=-0.010916 max=0.010602 Jy/beam ! Clean residual mean=0.000010 rms=0.003035 Jy/beam ! Combined flux in latest and established models = 0.750378 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.750378 Jy ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! Estimated beam: bmin=0.6087 mas, bmaj=1.958 mas, bpa=-7.066 degrees ! Estimated noise=0.664328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177041 Jy ! Component: 100 - total flux cleaned = -0.00153557 Jy ! Component: 150 - total flux cleaned = -0.00108916 Jy ! Component: 200 - total flux cleaned = -0.000885067 Jy ! Total flux subtracted in 200 components = -0.000885067 Jy ! Clean residual min=-0.014582 max=0.011448 Jy/beam ! Clean residual mean=0.000003 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.749493 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.749493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.161868Jy sigma=0.965137 ! Fit after self-cal, rms=0.161722Jy sigma=0.963815 wmodel /scr/pima/gb073_uvs/J1222+0413_X_map.mod ! Writing 53 model components to file: /scr/pima/gb073_uvs/J1222+0413_X_map.mod wobs /scr/pima/gb073_uvs/J1222+0413_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1222+0413_X_uvs.fits wwins /scr/pima/gb073_uvs/J1222+0413_X_map.win ! wwins: Wrote 3 windows to /scr/pima/gb073_uvs/J1222+0413_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0064275 Jy ! Component: 100 - total flux cleaned = -0.0109611 Jy ! Component: 150 - total flux cleaned = -0.0149477 Jy ! Component: 200 - total flux cleaned = -0.0179569 Jy ! Component: 250 - total flux cleaned = -0.0200813 Jy ! Component: 300 - total flux cleaned = -0.0217711 Jy ! Component: 350 - total flux cleaned = -0.0228722 Jy ! Component: 400 - total flux cleaned = -0.0241188 Jy ! Component: 450 - total flux cleaned = -0.024988 Jy ! Component: 500 - total flux cleaned = -0.0258388 Jy ! Component: 550 - total flux cleaned = -0.0268382 Jy ! Component: 600 - total flux cleaned = -0.0274929 Jy ! Component: 650 - total flux cleaned = -0.0282983 Jy ! Component: 700 - total flux cleaned = -0.0294076 Jy ! Component: 750 - total flux cleaned = -0.0298764 Jy ! Component: 800 - total flux cleaned = -0.0307993 Jy ! Component: 850 - total flux cleaned = -0.0315544 Jy ! Component: 900 - total flux cleaned = -0.0325939 Jy ! Component: 950 - total flux cleaned = -0.0330323 Jy ! Component: 1000 - total flux cleaned = -0.0336129 Jy ! Component: 1050 - total flux cleaned = -0.034468 Jy ! Component: 1100 - total flux cleaned = -0.0347529 Jy ! Component: 1150 - total flux cleaned = -0.0354525 Jy ! Component: 1200 - total flux cleaned = -0.0358641 Jy ! Component: 1250 - total flux cleaned = -0.0365466 Jy ! Component: 1300 - total flux cleaned = -0.0369516 Jy ! Component: 1350 - total flux cleaned = -0.0374857 Jy ! Component: 1400 - total flux cleaned = -0.0380121 Jy ! Component: 1450 - total flux cleaned = -0.038665 Jy ! Component: 1500 - total flux cleaned = -0.0391778 Jy ! Component: 1550 - total flux cleaned = -0.0394333 Jy ! Component: 1600 - total flux cleaned = -0.0403151 Jy ! Component: 1650 - total flux cleaned = -0.0405651 Jy ! Component: 1700 - total flux cleaned = -0.0410582 Jy ! Component: 1750 - total flux cleaned = -0.0413023 Jy ! Component: 1800 - total flux cleaned = -0.0420259 Jy ! Component: 1850 - total flux cleaned = -0.0423835 Jy ! Component: 1900 - total flux cleaned = -0.0426186 Jy ! Component: 1950 - total flux cleaned = -0.0430885 Jy ! Component: 2000 - total flux cleaned = -0.0437847 Jy ! Component: 2050 - total flux cleaned = -0.0440136 Jy ! Component: 2100 - total flux cleaned = -0.0444693 Jy ! Component: 2150 - total flux cleaned = -0.0445829 Jy ! Component: 2200 - total flux cleaned = -0.0454762 Jy ! Component: 2250 - total flux cleaned = -0.0455848 Jy ! Component: 2300 - total flux cleaned = -0.0459137 Jy ! Component: 2350 - total flux cleaned = -0.0461318 Jy ! Component: 2400 - total flux cleaned = -0.0463478 Jy ! Component: 2450 - total flux cleaned = -0.0468818 Jy ! Component: 2500 - total flux cleaned = -0.0473041 Jy ! Component: 2550 - total flux cleaned = -0.0479324 Jy ! Component: 2600 - total flux cleaned = -0.0483465 Jy ! Component: 2650 - total flux cleaned = -0.0485505 Jy ! Component: 2700 - total flux cleaned = -0.0490609 Jy ! Component: 2750 - total flux cleaned = -0.0493644 Jy ! Component: 2800 - total flux cleaned = -0.0497661 Jy ! Component: 2850 - total flux cleaned = -0.0502632 Jy ! Component: 2900 - total flux cleaned = -0.050756 Jy ! Component: 2950 - total flux cleaned = -0.0508526 Jy ! Component: 3000 - total flux cleaned = -0.0512421 Jy ! Component: 3050 - total flux cleaned = -0.0517229 Jy ! Component: 3100 - total flux cleaned = -0.0520095 Jy ! Component: 3150 - total flux cleaned = -0.0522936 Jy ! Component: 3200 - total flux cleaned = -0.0525754 Jy ! Component: 3250 - total flux cleaned = -0.0523887 Jy ! Component: 3300 - total flux cleaned = -0.0527588 Jy ! Component: 3350 - total flux cleaned = -0.0528504 Jy ! Component: 3400 - total flux cleaned = -0.0527596 Jy ! Component: 3450 - total flux cleaned = -0.0533038 Jy ! Component: 3500 - total flux cleaned = -0.0532131 Jy ! Component: 3550 - total flux cleaned = -0.0534813 Jy ! Component: 3600 - total flux cleaned = -0.0536579 Jy ! Component: 3650 - total flux cleaned = -0.0535688 Jy ! Component: 3700 - total flux cleaned = -0.0537442 Jy ! Component: 3750 - total flux cleaned = -0.0540045 Jy ! Component: 3800 - total flux cleaned = -0.0544345 Jy ! Component: 3850 - total flux cleaned = -0.0543487 Jy ! Component: 3900 - total flux cleaned = -0.0544337 Jy ! Component: 3950 - total flux cleaned = -0.054434 Jy ! Component: 4000 - total flux cleaned = -0.0545175 Jy ! Component: 4050 - total flux cleaned = -0.0546841 Jy ! Total flux subtracted in 4096 components = -0.0550971 Jy ! Clean residual min=-0.004328 max=0.004124 Jy/beam ! Clean residual mean=-0.000002 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.694395 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 319 components and 0.694395 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1222+0413_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6087 x 1.958 at -7.066 degrees (North through East) ! Clean map min=-0.0096733 max=0.67609 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1222+0413_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.676087 invert ! Inverting map ! Your choice of large map pixels excluded 5.23% of the data. ! The x-axis pixel size should ideally be below 0.177 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013207 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.586033 0.586033 1.17207 2.34413 4.68827 9.37654 18.7531 37.5061 75.0123 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.676 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 511.916 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1222+0413_X_uvs.log closed on Sat Dec 26 09:38:26 2015