! Started logfile: /scr/pima/gb073_uvs/J1222+0413_S_uvs.log on Sat Dec 26 10:17:47 2015 obs /scr/pima/gb073_uvs/J1222+0413_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1222+0413_S_uva.fits ! AN table 1: 52 integrations on 55 of 55 possible baselines. ! AN table 2: 44 integrations on 55 of 55 possible baselines. ! AN table 3: 37 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.715326 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 36144 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1222+0413_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 158 telescope corrections were flagged in sub-array 1. ! A total of 82 telescope corrections were flagged in sub-array 2. ! A total of 90 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 158 telescope corrections were flagged in sub-array 1. ! A total of 82 telescope corrections were flagged in sub-array 2. ! A total of 90 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! A total of 123 telescope corrections were flagged in sub-array 2. ! A total of 90 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 158 telescope corrections were flagged in sub-array 1. ! A total of 123 telescope corrections were flagged in sub-array 2. ! A total of 90 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 119 telescope corrections were flagged in sub-array 2. ! A total of 117 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 119 telescope corrections were flagged in sub-array 2. ! A total of 117 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 248 telescope corrections were flagged in sub-array 1. ! A total of 149 telescope corrections were flagged in sub-array 2. ! A total of 90 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 248 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 90 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.182639Jy sigma=8.139020 ! Fit after self-cal, rms=0.535537Jy sigma=5.039929 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.669 mas, bmaj=7.019 mas, bpa=-10.33 degrees ! Estimated noise=1.08513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303421 Jy ! Component: 100 - total flux cleaned = 0.406362 Jy ! Total flux subtracted in 100 components = 0.406362 Jy ! Clean residual min=-0.050843 max=0.063353 Jy/beam ! Clean residual mean=-0.000023 rms=0.010198 Jy/beam ! Combined flux in latest and established models = 0.406362 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.406362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.334831Jy sigma=1.508568 ! Fit after self-cal, rms=0.334768Jy sigma=1.508110 ! Inverting map ! Added new window around map position (6.5, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617433 Jy ! Component: 100 - total flux cleaned = 0.0808769 Jy ! Total flux subtracted in 100 components = 0.0808769 Jy ! Clean residual min=-0.042641 max=0.054582 Jy/beam ! Clean residual mean=-0.000009 rms=0.009014 Jy/beam ! Combined flux in latest and established models = 0.487239 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.487239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.315215Jy sigma=1.355433 ! Fit after self-cal, rms=0.314583Jy sigma=1.350654 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.053 mas, bmaj=7.423 mas, bpa=-8.592 degrees ! Estimated noise=0.693769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510308 Jy ! Component: 100 - total flux cleaned = 0.0661385 Jy ! Component: 150 - total flux cleaned = 0.068884 Jy ! Component: 200 - total flux cleaned = 0.0705435 Jy ! Total flux subtracted in 200 components = 0.0705435 Jy ! Clean residual min=-0.021118 max=0.037579 Jy/beam ! Clean residual mean=0.000020 rms=0.006864 Jy/beam ! Combined flux in latest and established models = 0.557783 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.557783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.294233Jy sigma=1.376626 ! Fit after self-cal, rms=0.294136Jy sigma=1.375363 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.053 x 7.423 at -8.592 degrees (North through East) ! Clean map min=-0.028786 max=0.46592 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.98 KP 0.99 LA 0.96 ! MK 0.85 NL 0.86 PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 KP 0.98 LA 0.97 ! MK 0.92 NL 0.97 PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.02 KP 0.98 LA 0.99 ! MK 0.85 NL 0.97 PT 1.01 SC 1.05 ! ! ! Correcting IF 5. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 6. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.04 KP 0.86 LA 0.99 ! MK 0.84 NL 1.02 PT 1.00* SC 1.01 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.20 FD 1.07 KP 0.84 LA 0.88 ! MK 0.91 NL 1.01 PT 0.98 SC 0.98 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.294136Jy sigma=1.375363 ! Fit after self-cal, rms=0.292762Jy sigma=1.368793 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.057 mas, bmaj=7.456 mas, bpa=-8.787 degrees ! Estimated noise=0.687949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26, 118.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255999 Jy ! Component: 100 - total flux cleaned = 0.0289391 Jy ! Component: 150 - total flux cleaned = 0.029568 Jy ! Component: 200 - total flux cleaned = 0.0286239 Jy ! Total flux subtracted in 200 components = 0.0286239 Jy ! Clean residual min=-0.019128 max=0.032932 Jy/beam ! Clean residual mean=0.000002 rms=0.006069 Jy/beam ! Combined flux in latest and established models = 0.586406 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.586406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.289065Jy sigma=1.264081 ! Fit after self-cal, rms=0.288424Jy sigma=1.261788 ! Inverting map ! Added new window around map position (-5.5, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279455 Jy ! Component: 100 - total flux cleaned = 0.0335423 Jy ! Component: 150 - total flux cleaned = 0.0357908 Jy ! Component: 200 - total flux cleaned = 0.0377923 Jy ! Total flux subtracted in 200 components = 0.0377923 Jy ! Clean residual min=-0.018655 max=0.031491 Jy/beam ! Clean residual mean=-0.000013 rms=0.005492 Jy/beam ! Combined flux in latest and established models = 0.624199 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.624199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.284441Jy sigma=1.199801 ! Fit after self-cal, rms=0.283903Jy sigma=1.197563 ! Inverting map ! Added new window around map position (9, -21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222023 Jy ! Component: 100 - total flux cleaned = 0.0288445 Jy ! Component: 150 - total flux cleaned = 0.0354743 Jy ! Component: 200 - total flux cleaned = 0.039892 Jy ! Total flux subtracted in 200 components = 0.039892 Jy ! Clean residual min=-0.016996 max=0.021674 Jy/beam ! Clean residual mean=-0.000034 rms=0.004976 Jy/beam ! Combined flux in latest and established models = 0.664091 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 0.664091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.281101Jy sigma=1.141756 ! Fit after self-cal, rms=0.280593Jy sigma=1.140444 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.280593Jy sigma=1.140444 ! Fit after self-cal, rms=0.280559Jy sigma=1.139575 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.056 mas, bmaj=7.455 mas, bpa=-8.767 degrees ! Estimated noise=0.688943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474493 Jy ! Component: 100 - total flux cleaned = 0.00741611 Jy ! Component: 150 - total flux cleaned = 0.0099095 Jy ! Component: 200 - total flux cleaned = 0.0110854 Jy ! Total flux subtracted in 200 components = 0.0110854 Jy ! Clean residual min=-0.015859 max=0.020479 Jy/beam ! Clean residual mean=-0.000039 rms=0.004822 Jy/beam ! Combined flux in latest and established models = 0.675176 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 103 components and 0.675176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.278962Jy sigma=1.123833 ! Fit after self-cal, rms=0.278816Jy sigma=1.123589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33, -105.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167805 Jy ! Component: 100 - total flux cleaned = 0.0228936 Jy ! Component: 150 - total flux cleaned = 0.0259159 Jy ! Component: 200 - total flux cleaned = 0.0280618 Jy ! Total flux subtracted in 200 components = 0.0280618 Jy ! Clean residual min=-0.014923 max=0.019523 Jy/beam ! Clean residual mean=-0.000056 rms=0.004552 Jy/beam ! Combined flux in latest and established models = 0.703238 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 120 components and 0.703238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.277024Jy sigma=1.095408 ! Fit after self-cal, rms=0.276939Jy sigma=1.094708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.276939Jy sigma=1.094708 ! Fit after self-cal, rms=0.276947Jy sigma=1.094550 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.055 mas, bmaj=7.453 mas, bpa=-8.755 degrees ! Estimated noise=0.689783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381779 Jy ! Component: 100 - total flux cleaned = 0.00415615 Jy ! Component: 150 - total flux cleaned = 0.00545013 Jy ! Component: 200 - total flux cleaned = 0.00606108 Jy ! Total flux subtracted in 200 components = 0.00606108 Jy ! Clean residual min=-0.014353 max=0.018989 Jy/beam ! Clean residual mean=-0.000058 rms=0.004467 Jy/beam ! Combined flux in latest and established models = 0.709299 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 127 components and 0.709299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.275930Jy sigma=1.084605 ! Fit after self-cal, rms=0.275880Jy sigma=1.084503 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123076 Jy ! Component: 100 - total flux cleaned = 0.00123205 Jy ! Component: 150 - total flux cleaned = 0.00180086 Jy ! Component: 200 - total flux cleaned = 0.00234265 Jy ! Total flux subtracted in 200 components = 0.00234265 Jy ! Clean residual min=-0.014150 max=0.018448 Jy/beam ! Clean residual mean=-0.000060 rms=0.004403 Jy/beam ! Combined flux in latest and established models = 0.711642 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 133 components and 0.711642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.275170Jy sigma=1.076614 ! Fit after self-cal, rms=0.275130Jy sigma=1.076558 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.275130Jy sigma=1.076558 ! Fit after self-cal, rms=0.274992Jy sigma=1.074307 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.846 mas, bmaj=10.93 mas, bpa=19.82 degrees ! Estimated noise=0.973914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329313 Jy ! Component: 100 - total flux cleaned = 0.00286863 Jy ! Component: 150 - total flux cleaned = 0.00246634 Jy ! Component: 200 - total flux cleaned = 0.00229828 Jy ! Total flux subtracted in 200 components = 0.00229828 Jy ! Clean residual min=-0.019567 max=0.022037 Jy/beam ! Clean residual mean=-0.000149 rms=0.007801 Jy/beam ! Combined flux in latest and established models = 0.71394 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.71394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.275034Jy sigma=1.068500 ! Fit after self-cal, rms=0.275051Jy sigma=1.068351 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000802534 Jy ! Component: 100 - total flux cleaned = -0.00131592 Jy ! Component: 150 - total flux cleaned = -0.0013191 Jy ! Component: 200 - total flux cleaned = -0.00175809 Jy ! Total flux subtracted in 200 components = -0.00175809 Jy ! Clean residual min=-0.019593 max=0.021790 Jy/beam ! Clean residual mean=-0.000149 rms=0.007729 Jy/beam ! Combined flux in latest and established models = 0.712182 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.712182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.275143Jy sigma=1.066651 ! Fit after self-cal, rms=0.275169Jy sigma=1.066566 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.054 mas, bmaj=7.448 mas, bpa=-8.753 degrees ! Estimated noise=0.689911 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.054 x 7.448 at -8.753 degrees (North through East) ! Clean map min=-0.020313 max=0.47054 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.67 mas, bmaj=7.037 mas, bpa=-10.36 degrees ! Estimated noise=1.07588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299887 Jy ! Component: 100 - total flux cleaned = 0.405481 Jy ! Component: 150 - total flux cleaned = 0.469094 Jy ! Component: 200 - total flux cleaned = 0.514067 Jy ! Total flux subtracted in 200 components = 0.514067 Jy ! Clean residual min=-0.036429 max=0.049046 Jy/beam ! Clean residual mean=-0.000020 rms=0.008284 Jy/beam ! Combined flux in latest and established models = 0.514067 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.514067 Jy ! Inverting map and beam ! Estimated beam: bmin=2.054 mas, bmaj=7.448 mas, bpa=-8.753 degrees ! Estimated noise=0.689911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586206 Jy ! Component: 100 - total flux cleaned = 0.0913979 Jy ! Component: 150 - total flux cleaned = 0.107463 Jy ! Component: 200 - total flux cleaned = 0.117927 Jy ! Total flux subtracted in 200 components = 0.117927 Jy ! Clean residual min=-0.019952 max=0.025895 Jy/beam ! Clean residual mean=-0.000021 rms=0.005699 Jy/beam ! Combined flux in latest and established models = 0.631993 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 47 components and 0.631993 Jy ! Inverting map ! Added new window around map position (-10, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200571 Jy ! Component: 100 - total flux cleaned = 0.0290549 Jy ! Component: 150 - total flux cleaned = 0.0335836 Jy ! Component: 200 - total flux cleaned = 0.0384817 Jy ! Total flux subtracted in 200 components = 0.0384817 Jy ! Clean residual min=-0.018089 max=0.023400 Jy/beam ! Clean residual mean=-0.000038 rms=0.005138 Jy/beam ! Combined flux in latest and established models = 0.670475 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.670475 Jy ! Inverting map ! Added new window around map position (9.5, 40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145363 Jy ! Component: 100 - total flux cleaned = 0.0197144 Jy ! Component: 150 - total flux cleaned = 0.0238439 Jy ! Component: 200 - total flux cleaned = 0.0260511 Jy ! Total flux subtracted in 200 components = 0.0260511 Jy ! Clean residual min=-0.016318 max=0.020204 Jy/beam ! Clean residual mean=-0.000048 rms=0.004734 Jy/beam ! Combined flux in latest and established models = 0.696526 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 88 components and 0.696526 Jy ! Inverting map ! Added new window around map position (-72, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191084 Jy ! Component: 100 - total flux cleaned = 0.0242971 Jy ! Component: 150 - total flux cleaned = 0.0276416 Jy ! Component: 200 - total flux cleaned = 0.0294412 Jy ! Total flux subtracted in 200 components = 0.0294412 Jy ! Clean residual min=-0.015025 max=0.019911 Jy/beam ! Clean residual mean=-0.000039 rms=0.004376 Jy/beam ! Combined flux in latest and established models = 0.725967 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 112 components and 0.725967 Jy ! Inverting map ! Added new window around map position (-12, -45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156178 Jy ! Component: 100 - total flux cleaned = 0.0198117 Jy ! Component: 150 - total flux cleaned = 0.0249668 Jy ! Component: 200 - total flux cleaned = 0.0265637 Jy ! Total flux subtracted in 200 components = 0.0265637 Jy ! Clean residual min=-0.013332 max=0.017426 Jy/beam ! Clean residual mean=-0.000044 rms=0.004051 Jy/beam ! Combined flux in latest and established models = 0.752531 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 139 components and 0.752531 Jy ! Inverting map ! Added new window around map position (72, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177152 Jy ! Component: 100 - total flux cleaned = 0.0223825 Jy ! Component: 150 - total flux cleaned = 0.0238617 Jy ! Component: 200 - total flux cleaned = 0.0245558 Jy ! Total flux subtracted in 200 components = 0.0245558 Jy ! Clean residual min=-0.012769 max=0.015976 Jy/beam ! Clean residual mean=-0.000033 rms=0.003773 Jy/beam ! Combined flux in latest and established models = 0.777087 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 165 components and 0.777087 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.846 mas, bmaj=10.93 mas, bpa=19.82 degrees ! Estimated noise=0.973914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243413 Jy ! Component: 100 - total flux cleaned = 0.00195609 Jy ! Component: 150 - total flux cleaned = 0.00459203 Jy ! Component: 200 - total flux cleaned = 0.0063849 Jy ! Total flux subtracted in 200 components = 0.0063849 Jy ! Clean residual min=-0.015884 max=0.018612 Jy/beam ! Clean residual mean=-0.000080 rms=0.005914 Jy/beam ! Combined flux in latest and established models = 0.783472 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135158 Jy ! Component: 100 - total flux cleaned = 0.0021028 Jy ! Component: 150 - total flux cleaned = 0.00233227 Jy ! Component: 200 - total flux cleaned = 0.002765 Jy ! Total flux subtracted in 200 components = 0.002765 Jy ! Clean residual min=-0.015649 max=0.018124 Jy/beam ! Clean residual mean=-0.000077 rms=0.005733 Jy/beam ! Combined flux in latest and established models = 0.786237 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 199 components and 0.786237 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.054 mas, bmaj=7.448 mas, bpa=-8.753 degrees ! Estimated noise=0.689911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0065192 Jy ! Component: 100 - total flux cleaned = -0.00871885 Jy ! Component: 150 - total flux cleaned = -0.00990803 Jy ! Component: 200 - total flux cleaned = -0.0110286 Jy ! Total flux subtracted in 200 components = -0.0110286 Jy ! Clean residual min=-0.012092 max=0.014151 Jy/beam ! Clean residual mean=-0.000028 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 0.775208 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 217 components and 0.775208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.270835Jy sigma=1.009091 ! Fit after self-cal, rms=0.270195Jy sigma=1.006696 wmodel /scr/pima/gb073_uvs/J1222+0413_S_map.mod ! Writing 217 model components to file: /scr/pima/gb073_uvs/J1222+0413_S_map.mod wobs /scr/pima/gb073_uvs/J1222+0413_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1222+0413_S_uvs.fits wwins /scr/pima/gb073_uvs/J1222+0413_S_map.win ! wwins: Wrote 11 windows to /scr/pima/gb073_uvs/J1222+0413_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655385 Jy ! Component: 100 - total flux cleaned = 0.0119217 Jy ! Component: 150 - total flux cleaned = 0.016778 Jy ! Component: 200 - total flux cleaned = 0.021661 Jy ! Component: 250 - total flux cleaned = 0.0257416 Jy ! Component: 300 - total flux cleaned = 0.0299127 Jy ! Component: 350 - total flux cleaned = 0.0339732 Jy ! Component: 400 - total flux cleaned = 0.0377336 Jy ! Component: 450 - total flux cleaned = 0.0404408 Jy ! Component: 500 - total flux cleaned = 0.0430854 Jy ! Component: 550 - total flux cleaned = 0.0453089 Jy ! Component: 600 - total flux cleaned = 0.0478514 Jy ! Component: 650 - total flux cleaned = 0.0503489 Jy ! Component: 700 - total flux cleaned = 0.0521055 Jy ! Component: 750 - total flux cleaned = 0.0543569 Jy ! Component: 800 - total flux cleaned = 0.0560625 Jy ! Component: 850 - total flux cleaned = 0.0575785 Jy ! Component: 900 - total flux cleaned = 0.0597368 Jy ! Component: 950 - total flux cleaned = 0.0612086 Jy ! Component: 1000 - total flux cleaned = 0.063145 Jy ! Component: 1050 - total flux cleaned = 0.0645816 Jy ! Component: 1100 - total flux cleaned = 0.0664734 Jy ! Component: 1150 - total flux cleaned = 0.0683385 Jy ! Component: 1200 - total flux cleaned = 0.0700263 Jy ! Component: 1250 - total flux cleaned = 0.0715437 Jy ! Component: 1300 - total flux cleaned = 0.0733441 Jy ! Component: 1350 - total flux cleaned = 0.0743858 Jy ! Component: 1400 - total flux cleaned = 0.0764394 Jy ! Component: 1450 - total flux cleaned = 0.0778881 Jy ! Component: 1500 - total flux cleaned = 0.0791815 Jy ! Component: 1550 - total flux cleaned = 0.0803174 Jy ! Component: 1600 - total flux cleaned = 0.082003 Jy ! Component: 1650 - total flux cleaned = 0.0835296 Jy ! Component: 1700 - total flux cleaned = 0.0840793 Jy ! Component: 1750 - total flux cleaned = 0.0858485 Jy ! Component: 1800 - total flux cleaned = 0.0869269 Jy ! Component: 1850 - total flux cleaned = 0.0883958 Jy ! Component: 1900 - total flux cleaned = 0.0891905 Jy ! Component: 1950 - total flux cleaned = 0.0906329 Jy ! Component: 2000 - total flux cleaned = 0.0921902 Jy ! Component: 2050 - total flux cleaned = 0.093215 Jy ! Component: 2100 - total flux cleaned = 0.0941043 Jy ! Component: 2150 - total flux cleaned = 0.09486 Jy ! Component: 2200 - total flux cleaned = 0.0956088 Jy ! Component: 2250 - total flux cleaned = 0.0969708 Jy ! Component: 2300 - total flux cleaned = 0.0979497 Jy ! Component: 2350 - total flux cleaned = 0.0986797 Jy ! Component: 2400 - total flux cleaned = 0.0994003 Jy ! Component: 2450 - total flux cleaned = 0.100118 Jy ! Component: 2500 - total flux cleaned = 0.100709 Jy ! Component: 2550 - total flux cleaned = 0.101531 Jy ! Component: 2600 - total flux cleaned = 0.101765 Jy ! Component: 2650 - total flux cleaned = 0.102227 Jy ! Component: 2700 - total flux cleaned = 0.102914 Jy ! Component: 2750 - total flux cleaned = 0.10405 Jy ! Component: 2800 - total flux cleaned = 0.103823 Jy ! Component: 2850 - total flux cleaned = 0.105052 Jy ! Component: 2900 - total flux cleaned = 0.105274 Jy ! Component: 2950 - total flux cleaned = 0.106045 Jy ! Component: 3000 - total flux cleaned = 0.106154 Jy ! Component: 3050 - total flux cleaned = 0.106805 Jy ! Component: 3100 - total flux cleaned = 0.10702 Jy ! Component: 3150 - total flux cleaned = 0.107981 Jy ! Component: 3200 - total flux cleaned = 0.108298 Jy ! Component: 3250 - total flux cleaned = 0.109139 Jy ! Component: 3300 - total flux cleaned = 0.110077 Jy ! Component: 3350 - total flux cleaned = 0.110388 Jy ! Component: 3400 - total flux cleaned = 0.111006 Jy ! Component: 3450 - total flux cleaned = 0.111416 Jy ! Component: 3500 - total flux cleaned = 0.11243 Jy ! Component: 3550 - total flux cleaned = 0.112933 Jy ! Component: 3600 - total flux cleaned = 0.113734 Jy ! Component: 3650 - total flux cleaned = 0.114329 Jy ! Component: 3700 - total flux cleaned = 0.114822 Jy ! Component: 3750 - total flux cleaned = 0.115902 Jy ! Component: 3800 - total flux cleaned = 0.116098 Jy ! Component: 3850 - total flux cleaned = 0.116776 Jy ! Component: 3900 - total flux cleaned = 0.11745 Jy ! Component: 3950 - total flux cleaned = 0.118025 Jy ! Component: 4000 - total flux cleaned = 0.118881 Jy ! Component: 4050 - total flux cleaned = 0.11926 Jy ! Total flux subtracted in 4096 components = 0.1202 Jy ! Clean residual min=-0.004985 max=0.005503 Jy/beam ! Clean residual mean=-0.000026 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.895408 Jy keep ! Adding 351 model components to the UV plane model. ! The established model now contains 568 components and 0.895408 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1222+0413_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.054 x 7.448 at -8.753 degrees (North through East) ! Clean map min=-0.016641 max=0.46579 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1222+0413_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.465787 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00179675 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15724 1.15724 2.31447 4.62894 9.25788 18.5158 37.0315 74.0631 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0053 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.465 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 259.238 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1222+0413_S_uvs.log closed on Sat Dec 26 10:17:53 2015