! Started logfile: /scr/pima/gb073_uvs/J1218+1738_X_uvs.log on Sat Dec 26 09:38:09 2015 obs /scr/pima/gb073_uvs/J1218+1738_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1218+1738_X_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! AN table 2: 79 integrations on 10 of 10 possible baselines. ! AN table 3: 10 integrations on 10 of 10 possible baselines. ! AN table 4: 49 integrations on 66 of 66 possible baselines. ! AN table 5: 22 integrations on 6 of 6 possible baselines. ! AN table 6: 19 integrations on 3 of 3 possible baselines. ! AN table 7: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.558077 visibilities/baseline/integration-bin. ! Found source: J1218+1738 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 26368 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1218+1738_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 139 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 139 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 139 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 139 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 5. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 196 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 6. ! A total of 27 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 196 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 7. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 139 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 8. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 251 telescope corrections were flagged in sub-array 2. ! A total of 50 telescope corrections were flagged in sub-array 3. ! A total of 139 telescope corrections were flagged in sub-array 4. ! A total of 52 telescope corrections were flagged in sub-array 5. ! A total of 21 telescope corrections were flagged in sub-array 6. ! A total of 107 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.010441Jy sigma=8.070891 ! Fit after self-cal, rms=0.918562Jy sigma=7.413967 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.97% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.4613 mas, bmaj=1.408 mas, bpa=-3.074 degrees ! Estimated noise=1.23729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637356 Jy ! Component: 100 - total flux cleaned = 0.0821225 Jy ! Total flux subtracted in 100 components = 0.0821225 Jy ! Clean residual min=-0.005060 max=0.011910 Jy/beam ! Clean residual mean=0.000004 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.0821225 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0821225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.101354Jy sigma=0.687772 ! Fit after self-cal, rms=0.100581Jy sigma=0.682589 ! Inverting map ! Your choice of large map pixels excluded 5.97% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Added new window around map position (-9.4, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129026 Jy ! Component: 100 - total flux cleaned = 0.0217216 Jy ! Total flux subtracted in 100 components = 0.0217216 Jy ! Clean residual min=-0.004540 max=0.005038 Jy/beam ! Clean residual mean=0.000002 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.103844 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.103844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.098572Jy sigma=0.661870 ! Fit after self-cal, rms=0.098394Jy sigma=0.660693 ! Inverting map ! Your choice of large map pixels excluded 5.97% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0082007 Jy ! Component: 100 - total flux cleaned = 0.0140342 Jy ! Total flux subtracted in 100 components = 0.0140342 Jy ! Clean residual min=-0.004154 max=0.004314 Jy/beam ! Clean residual mean=0.000001 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.117878 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.117878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097590Jy sigma=0.652594 ! Fit after self-cal, rms=0.097508Jy sigma=0.652161 ! Inverting map ! Your choice of large map pixels excluded 5.97% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.97% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5844 mas, bmaj=1.639 mas, bpa=-3.297 degrees ! Estimated noise=0.641246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061791 Jy ! Component: 100 - total flux cleaned = 0.0103772 Jy ! Component: 150 - total flux cleaned = 0.0133703 Jy ! Component: 200 - total flux cleaned = 0.0155349 Jy ! Total flux subtracted in 200 components = 0.0155349 Jy ! Clean residual min=-0.002767 max=0.003164 Jy/beam ! Clean residual mean=-0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.133413 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.133413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097072Jy sigma=0.647929 ! Fit after self-cal, rms=0.096981Jy sigma=0.647477 ! Inverting map ! Your choice of large map pixels excluded 5.97% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5844 x 1.639 at -3.297 degrees (North through East) ! Clean map min=-0.0025072 max=0.087064 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 EF 1.00* FD 0.93 KP 0.94 ! LA 1.09 MC 1.08 NL 1.02 OV 0.93 ! PT 0.95 SC 0.93 ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 EF 1.00* FD 1.00 HH 1.11 ! KP 0.97 LA 1.05 MC 0.94 NL 0.98 ! ON 1.03 PT 1.04 SC 1.08 ZC 0.88 ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 EF 1.00* FD 1.04 KP 1.02 ! LA 1.01 MC 0.93 NL 1.08 OV 0.94 ! PT 0.97 SC 1.08 ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 EF 1.00* FD 1.01 KP 1.08 ! LA 1.09 MC 1.16 NL 1.01 OV 0.97 ! PT 0.98 SC 1.03 ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.05 HH 0.88 ! KP 0.92 LA 0.96 MC 1.12 NL 1.08 ! ON 1.13 PT 0.98 SC 0.97 ZC 0.84 ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 EF 1.00* FD 1.09 KP 0.94 ! LA 1.06 MC 1.03 NL 1.05 OV 1.10 ! PT 0.99 SC 0.94 ! ! A total of 144 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Fit before self-cal, rms=0.096981Jy sigma=0.647477 ! Fit after self-cal, rms=0.095552Jy sigma=0.653486 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5689 mas, bmaj=1.612 mas, bpa=-3.419 degrees ! Estimated noise=0.658203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248675 Jy ! Component: 100 - total flux cleaned = 0.00340229 Jy ! Component: 150 - total flux cleaned = 0.00354567 Jy ! Component: 200 - total flux cleaned = 0.00366636 Jy ! Total flux subtracted in 200 components = 0.00366636 Jy ! Clean residual min=-0.002536 max=0.002530 Jy/beam ! Clean residual mean=-0.000005 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.13708 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.13708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095504Jy sigma=0.652858 ! Fit after self-cal, rms=0.095510Jy sigma=0.652735 ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095510Jy sigma=0.652735 ! Fit after self-cal, rms=0.095319Jy sigma=0.652007 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5676 mas, bmaj=1.615 mas, bpa=-3.448 degrees ! Estimated noise=0.657512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559658 Jy ! Component: 100 - total flux cleaned = 0.000641318 Jy ! Component: 150 - total flux cleaned = 0.000755374 Jy ! Component: 200 - total flux cleaned = 0.000795772 Jy ! Total flux subtracted in 200 components = 0.000795772 Jy ! Clean residual min=-0.002429 max=0.002662 Jy/beam ! Clean residual mean=-0.000006 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.137875 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.137875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095313Jy sigma=0.651895 ! Fit after self-cal, rms=0.095324Jy sigma=0.651851 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.8, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184272 Jy ! Component: 100 - total flux cleaned = 0.00214542 Jy ! Component: 150 - total flux cleaned = 0.002145 Jy ! Component: 200 - total flux cleaned = 0.00226385 Jy ! Total flux subtracted in 200 components = 0.00226385 Jy ! Clean residual min=-0.002272 max=0.002327 Jy/beam ! Clean residual mean=-0.000006 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.140139 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.140139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095261Jy sigma=0.651303 ! Fit after self-cal, rms=0.095251Jy sigma=0.651126 ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Added new window around map position (17.8, 25.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201965 Jy ! Component: 100 - total flux cleaned = 0.00323832 Jy ! Component: 150 - total flux cleaned = 0.00373199 Jy ! Component: 200 - total flux cleaned = 0.00386011 Jy ! Total flux subtracted in 200 components = 0.00386011 Jy ! Clean residual min=-0.002203 max=0.001965 Jy/beam ! Clean residual mean=-0.000004 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.143999 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.143999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095196Jy sigma=0.650695 ! Fit after self-cal, rms=0.095193Jy sigma=0.650637 ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095193Jy sigma=0.650637 ! Fit after self-cal, rms=0.095516Jy sigma=0.650618 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5684 mas, bmaj=1.613 mas, bpa=-3.438 degrees ! Estimated noise=0.65895 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857506 Jy ! Component: 100 - total flux cleaned = 0.00108236 Jy ! Component: 150 - total flux cleaned = 0.00122363 Jy ! Component: 200 - total flux cleaned = 0.00130084 Jy ! Total flux subtracted in 200 components = 0.00130084 Jy ! Clean residual min=-0.002092 max=0.001967 Jy/beam ! Clean residual mean=-0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.1453 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 0.1453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095495Jy sigma=0.650485 ! Fit after self-cal, rms=0.095508Jy sigma=0.650426 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280582 Jy ! Component: 100 - total flux cleaned = 0.000305402 Jy ! Component: 150 - total flux cleaned = 0.000352099 Jy ! Component: 200 - total flux cleaned = 0.000419152 Jy ! Total flux subtracted in 200 components = 0.000419152 Jy ! Clean residual min=-0.002020 max=0.001969 Jy/beam ! Clean residual mean=-0.000003 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.145719 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.145719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095497Jy sigma=0.650348 ! Fit after self-cal, rms=0.095498Jy sigma=0.650341 ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095498Jy sigma=0.650341 ! Fit after self-cal, rms=0.095578Jy sigma=0.650367 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=2.734 mas, bmaj=3.301 mas, bpa=-74.74 degrees ! Estimated noise=0.842738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150679 Jy ! Component: 100 - total flux cleaned = 0.000151417 Jy ! Component: 150 - total flux cleaned = 0.000209082 Jy ! Component: 200 - total flux cleaned = 0.000243671 Jy ! Total flux subtracted in 200 components = 0.000243671 Jy ! Clean residual min=-0.002759 max=0.002356 Jy/beam ! Clean residual mean=-0.000008 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.145963 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.145963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095575Jy sigma=0.650368 ! Fit after self-cal, rms=0.095578Jy sigma=0.650355 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198946 Jy ! Component: 100 - total flux cleaned = 0.000231858 Jy ! Component: 150 - total flux cleaned = 0.000232085 Jy ! Component: 200 - total flux cleaned = 0.000246588 Jy ! Total flux subtracted in 200 components = 0.000246588 Jy ! Clean residual min=-0.002708 max=0.002364 Jy/beam ! Clean residual mean=-0.000008 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.14621 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.14621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095579Jy sigma=0.650372 ! Fit after self-cal, rms=0.095579Jy sigma=0.650367 ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5687 mas, bmaj=1.612 mas, bpa=-3.428 degrees ! Estimated noise=0.659056 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5687 x 1.612 at -3.428 degrees (North through East) ! Clean map min=-0.0017703 max=0.08444 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.4461 mas, bmaj=1.377 mas, bpa=-3.221 degrees ! Estimated noise=1.28694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0610954 Jy ! Component: 100 - total flux cleaned = 0.0817631 Jy ! Component: 150 - total flux cleaned = 0.0950359 Jy ! Component: 200 - total flux cleaned = 0.104387 Jy ! Total flux subtracted in 200 components = 0.104387 Jy ! Clean residual min=-0.004529 max=0.005415 Jy/beam ! Clean residual mean=0.000001 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.104387 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.104387 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5687 mas, bmaj=1.612 mas, bpa=-3.428 degrees ! Estimated noise=0.659056 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100708 Jy ! Component: 100 - total flux cleaned = 0.017251 Jy ! Component: 150 - total flux cleaned = 0.0226372 Jy ! Component: 200 - total flux cleaned = 0.0268316 Jy ! Total flux subtracted in 200 components = 0.0268316 Jy ! Clean residual min=-0.002345 max=0.003282 Jy/beam ! Clean residual mean=-0.000004 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.131219 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 0.131219 Jy ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Added new window around map position (-3.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354437 Jy ! Component: 100 - total flux cleaned = 0.00626709 Jy ! Component: 150 - total flux cleaned = 0.00795619 Jy ! Component: 200 - total flux cleaned = 0.00928737 Jy ! Total flux subtracted in 200 components = 0.00928737 Jy ! Clean residual min=-0.001951 max=0.001956 Jy/beam ! Clean residual mean=-0.000004 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.140506 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 50 components and 0.140506 Jy ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=2.734 mas, bmaj=3.301 mas, bpa=-74.74 degrees ! Estimated noise=0.842738 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199979 Jy ! Component: 100 - total flux cleaned = 0.00340444 Jy ! Component: 150 - total flux cleaned = 0.00445982 Jy ! Component: 200 - total flux cleaned = 0.00525999 Jy ! Total flux subtracted in 200 components = 0.00525999 Jy ! Clean residual min=-0.002431 max=0.002121 Jy/beam ! Clean residual mean=-0.000008 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.145766 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211489 Jy ! Component: 100 - total flux cleaned = 0.000304639 Jy ! Component: 150 - total flux cleaned = 0.000368568 Jy ! Component: 200 - total flux cleaned = 0.000428081 Jy ! Total flux subtracted in 200 components = 0.000428081 Jy ! Clean residual min=-0.002454 max=0.002137 Jy/beam ! Clean residual mean=-0.000008 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.146194 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 79 components and 0.146194 Jy ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5687 mas, bmaj=1.612 mas, bpa=-3.428 degrees ! Estimated noise=0.659056 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.91198e-05 Jy ! Component: 100 - total flux cleaned = 0.000134765 Jy ! Component: 150 - total flux cleaned = 0.000210364 Jy ! Component: 200 - total flux cleaned = 0.000280701 Jy ! Total flux subtracted in 200 components = 0.000280701 Jy ! Clean residual min=-0.001840 max=0.001903 Jy/beam ! Clean residual mean=-0.000003 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.146475 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.146475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095580Jy sigma=0.650236 ! Fit after self-cal, rms=0.095559Jy sigma=0.650113 wmodel /scr/pima/gb073_uvs/J1218+1738_X_map.mod ! Writing 95 model components to file: /scr/pima/gb073_uvs/J1218+1738_X_map.mod wobs /scr/pima/gb073_uvs/J1218+1738_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1218+1738_X_uvs.fits wwins /scr/pima/gb073_uvs/J1218+1738_X_map.win ! wwins: Wrote 5 windows to /scr/pima/gb073_uvs/J1218+1738_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329766 Jy ! Component: 100 - total flux cleaned = 0.000195444 Jy ! Component: 150 - total flux cleaned = 0.000130164 Jy ! Component: 200 - total flux cleaned = 6.70907e-05 Jy ! Component: 250 - total flux cleaned = -2.51737e-05 Jy ! Component: 300 - total flux cleaned = -5.499e-05 Jy ! Component: 350 - total flux cleaned = 3.57829e-06 Jy ! Component: 400 - total flux cleaned = -0.000140597 Jy ! Component: 450 - total flux cleaned = -0.000112118 Jy ! Component: 500 - total flux cleaned = -0.000223672 Jy ! Component: 550 - total flux cleaned = -0.00027825 Jy ! Component: 600 - total flux cleaned = -0.000305385 Jy ! Component: 650 - total flux cleaned = -0.000438609 Jy ! Component: 700 - total flux cleaned = -0.000544033 Jy ! Component: 750 - total flux cleaned = -0.000672932 Jy ! Component: 800 - total flux cleaned = -0.00059588 Jy ! Component: 850 - total flux cleaned = -0.000646677 Jy ! Component: 900 - total flux cleaned = -0.000721426 Jy ! Component: 950 - total flux cleaned = -0.000671696 Jy ! Component: 1000 - total flux cleaned = -0.000745193 Jy ! Component: 1050 - total flux cleaned = -0.000720741 Jy ! Component: 1100 - total flux cleaned = -0.000696734 Jy ! Component: 1150 - total flux cleaned = -0.000720448 Jy ! Component: 1200 - total flux cleaned = -0.000602679 Jy ! Component: 1250 - total flux cleaned = -0.000672905 Jy ! Component: 1300 - total flux cleaned = -0.000696242 Jy ! Component: 1350 - total flux cleaned = -0.000696294 Jy ! Component: 1400 - total flux cleaned = -0.000650797 Jy ! Component: 1450 - total flux cleaned = -0.000628273 Jy ! Component: 1500 - total flux cleaned = -0.000695571 Jy ! Component: 1550 - total flux cleaned = -0.000628729 Jy ! Component: 1600 - total flux cleaned = -0.000540459 Jy ! Component: 1650 - total flux cleaned = -0.000628202 Jy ! Component: 1700 - total flux cleaned = -0.000584433 Jy ! Component: 1750 - total flux cleaned = -0.000519602 Jy ! Component: 1800 - total flux cleaned = -0.000583768 Jy ! Component: 1850 - total flux cleaned = -0.000498723 Jy ! Component: 1900 - total flux cleaned = -0.000477432 Jy ! Component: 1950 - total flux cleaned = -0.00049839 Jy ! Component: 2000 - total flux cleaned = -0.000456617 Jy ! Component: 2050 - total flux cleaned = -0.000435931 Jy ! Component: 2100 - total flux cleaned = -0.000353677 Jy ! Component: 2150 - total flux cleaned = -0.000414971 Jy ! Component: 2200 - total flux cleaned = -0.000354069 Jy ! Component: 2250 - total flux cleaned = -0.000333888 Jy ! Component: 2300 - total flux cleaned = -0.000314024 Jy ! Component: 2350 - total flux cleaned = -0.000254482 Jy ! Component: 2400 - total flux cleaned = -0.000333422 Jy ! Component: 2450 - total flux cleaned = -0.000294214 Jy ! Component: 2500 - total flux cleaned = -0.000294167 Jy ! Component: 2550 - total flux cleaned = -0.000255341 Jy ! Component: 2600 - total flux cleaned = -0.0001782 Jy ! Component: 2650 - total flux cleaned = -0.000293312 Jy ! Component: 2700 - total flux cleaned = -0.000235953 Jy ! Component: 2750 - total flux cleaned = -0.000254985 Jy ! Component: 2800 - total flux cleaned = -0.000254795 Jy ! Component: 2850 - total flux cleaned = -0.000198618 Jy ! Component: 2900 - total flux cleaned = -0.000272873 Jy ! Component: 2950 - total flux cleaned = -0.000124594 Jy ! Component: 3000 - total flux cleaned = -0.000161541 Jy ! Component: 3050 - total flux cleaned = -0.000235026 Jy ! Component: 3100 - total flux cleaned = -0.000216731 Jy ! Component: 3150 - total flux cleaned = -0.000216636 Jy ! Component: 3200 - total flux cleaned = -0.000306589 Jy ! Component: 3250 - total flux cleaned = -0.000199057 Jy ! Component: 3300 - total flux cleaned = -0.000323825 Jy ! Component: 3350 - total flux cleaned = -0.000341485 Jy ! Component: 3400 - total flux cleaned = -0.000359161 Jy ! Component: 3450 - total flux cleaned = -0.000411972 Jy ! Component: 3500 - total flux cleaned = -0.000429351 Jy ! Component: 3550 - total flux cleaned = -0.00044679 Jy ! Component: 3600 - total flux cleaned = -0.000498768 Jy ! Component: 3650 - total flux cleaned = -0.00051613 Jy ! Component: 3700 - total flux cleaned = -0.00048167 Jy ! Component: 3750 - total flux cleaned = -0.000498645 Jy ! Component: 3800 - total flux cleaned = -0.000447659 Jy ! Component: 3850 - total flux cleaned = -0.000515334 Jy ! Component: 3900 - total flux cleaned = -0.000448271 Jy ! Component: 3950 - total flux cleaned = -0.00049851 Jy ! Component: 4000 - total flux cleaned = -0.000465306 Jy ! Component: 4050 - total flux cleaned = -0.000548072 Jy ! Total flux subtracted in 4096 components = -0.000481929 Jy ! Clean residual min=-0.001149 max=0.001095 Jy/beam ! Clean residual mean=-0.000002 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.145993 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 416 components and 0.145993 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1218+1738_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5687 x 1.612 at -3.428 degrees (North through East) ! Clean map min=-0.0013997 max=0.084076 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1218+1738_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.084076 invert ! Inverting map ! Your choice of large map pixels excluded 6.53% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000278953 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.99536 0.99536 1.99072 3.98144 7.96288 15.9258 31.8515 63.7031 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.084 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 301.398 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1218+1738_X_uvs.log closed on Sat Dec 26 09:38:14 2015