! Started logfile: /scr/pima/gb073_uvs/J1218+1738_S_uvs.log on Sat Dec 26 10:17:32 2015 obs /scr/pima/gb073_uvs/J1218+1738_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1218+1738_S_uva.fits ! AN table 1: 25 integrations on 45 of 45 possible baselines. ! AN table 2: 206 integrations on 10 of 10 possible baselines. ! AN table 3: 32 integrations on 10 of 10 possible baselines. ! AN table 4: 98 integrations on 66 of 66 possible baselines. ! AN table 5: 38 integrations on 6 of 6 possible baselines. ! AN table 6: 56 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.659327 visibilities/baseline/integration-bin. ! Found source: J1218+1738 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 64440 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1218+1738_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! A total of 63 telescope corrections were flagged in sub-array 3. ! A total of 286 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 155 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! A total of 63 telescope corrections were flagged in sub-array 3. ! A total of 286 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 155 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! A total of 63 telescope corrections were flagged in sub-array 3. ! A total of 286 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 155 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 581 telescope corrections were flagged in sub-array 2. ! A total of 63 telescope corrections were flagged in sub-array 3. ! A total of 286 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 155 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 5. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 614 telescope corrections were flagged in sub-array 2. ! A total of 63 telescope corrections were flagged in sub-array 3. ! A total of 411 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 155 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 45 telescope corrections were flagged in sub-array 1. ! A total of 614 telescope corrections were flagged in sub-array 2. ! A total of 63 telescope corrections were flagged in sub-array 3. ! A total of 411 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 155 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 56 telescope corrections were flagged in sub-array 1. ! A total of 1030 telescope corrections were flagged in sub-array 2. ! A total of 160 telescope corrections were flagged in sub-array 3. ! A total of 386 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 203 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 56 telescope corrections were flagged in sub-array 1. ! A total of 805 telescope corrections were flagged in sub-array 2. ! A total of 160 telescope corrections were flagged in sub-array 3. ! A total of 386 telescope corrections were flagged in sub-array 4. ! A total of 152 telescope corrections were flagged in sub-array 5. ! A total of 203 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.039580Jy sigma=5.520628 ! Fit after self-cal, rms=0.859544Jy sigma=4.926742 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.519 mas, bmaj=2.882 mas, bpa=9.842 degrees ! Estimated noise=1.33464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0908033 Jy ! Component: 100 - total flux cleaned = 0.119999 Jy ! Total flux subtracted in 100 components = 0.119999 Jy ! Clean residual min=-0.011291 max=0.017323 Jy/beam ! Clean residual mean=0.000013 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 0.119999 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.119999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.231490Jy sigma=0.700895 ! Fit after self-cal, rms=0.230667Jy sigma=0.697978 ! Inverting map ! Added new window around map position (2.5, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192906 Jy ! Component: 100 - total flux cleaned = 0.0312578 Jy ! Total flux subtracted in 100 components = 0.0312578 Jy ! Clean residual min=-0.010683 max=0.014426 Jy/beam ! Clean residual mean=0.000013 rms=0.002418 Jy/beam ! Combined flux in latest and established models = 0.151257 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.151257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.226353Jy sigma=0.680909 ! Fit after self-cal, rms=0.226218Jy sigma=0.680278 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.849 mas, bmaj=3.297 mas, bpa=16.19 degrees ! Estimated noise=0.764479 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202117 Jy ! Component: 100 - total flux cleaned = 0.0254563 Jy ! Component: 150 - total flux cleaned = 0.0252623 Jy ! Component: 200 - total flux cleaned = 0.0252576 Jy ! Total flux subtracted in 200 components = 0.0252576 Jy ! Clean residual min=-0.007955 max=0.011866 Jy/beam ! Clean residual mean=0.000010 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.176515 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.176515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.222368Jy sigma=0.693423 ! Fit after self-cal, rms=0.222388Jy sigma=0.693373 ! Inverting map ! Added new window around map position (-7, 24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106835 Jy ! Component: 100 - total flux cleaned = 0.0121826 Jy ! Component: 150 - total flux cleaned = 0.0121755 Jy ! Component: 200 - total flux cleaned = 0.0121689 Jy ! Total flux subtracted in 200 components = 0.0121689 Jy ! Clean residual min=-0.007675 max=0.011164 Jy/beam ! Clean residual mean=0.000014 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 0.188683 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.188683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.221803Jy sigma=0.686414 ! Fit after self-cal, rms=0.221521Jy sigma=0.685825 ! Inverting map ! Added new window around map position (-13, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00888928 Jy ! Component: 100 - total flux cleaned = 0.0109593 Jy ! Component: 150 - total flux cleaned = 0.0122663 Jy ! Component: 200 - total flux cleaned = 0.0132337 Jy ! Total flux subtracted in 200 components = 0.0132337 Jy ! Clean residual min=-0.008164 max=0.008861 Jy/beam ! Clean residual mean=0.000024 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.201917 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.201917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.220972Jy sigma=0.679430 ! Fit after self-cal, rms=0.220758Jy sigma=0.678834 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.849 x 3.297 at 16.19 degrees (North through East) ! Clean map min=-0.0067838 max=0.14549 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* MC 1.00* NL 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* MC 1.00* NL 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* MC 1.00* NL 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 273 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* MC 1.00* NL 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 240 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* MC 1.00* NL 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 240 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* MC 1.00* NL 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 225 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* MC 0.00* NL 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* FD 1.00* HH 1.00* LA 1.00* ! MC 1.00* NL 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! ! Fit before self-cal, rms=0.220758Jy sigma=0.678834 ! Fit after self-cal, rms=0.214601Jy sigma=0.681824 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.832 mas, bmaj=3.447 mas, bpa=15.19 degrees ! Estimated noise=0.768232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710933 Jy ! Component: 100 - total flux cleaned = 0.00784141 Jy ! Component: 150 - total flux cleaned = 0.00784542 Jy ! Component: 200 - total flux cleaned = 0.00797506 Jy ! Total flux subtracted in 200 components = 0.00797506 Jy ! Clean residual min=-0.008035 max=0.007692 Jy/beam ! Clean residual mean=0.000030 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.209892 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.209892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.214270Jy sigma=0.677563 ! Fit after self-cal, rms=0.214121Jy sigma=0.677199 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.214121Jy sigma=0.677199 ! Fit after self-cal, rms=0.214121Jy sigma=0.677199 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.832 mas, bmaj=3.447 mas, bpa=15.19 degrees ! Estimated noise=0.768232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146752 Jy ! Component: 100 - total flux cleaned = 0.00172509 Jy ! Component: 150 - total flux cleaned = 0.0020879 Jy ! Component: 200 - total flux cleaned = 0.00231069 Jy ! Total flux subtracted in 200 components = 0.00231069 Jy ! Clean residual min=-0.007804 max=0.006822 Jy/beam ! Clean residual mean=0.000032 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.212203 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 62 components and 0.212203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213984Jy sigma=0.675326 ! Fit after self-cal, rms=0.213928Jy sigma=0.675247 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547249 Jy ! Component: 100 - total flux cleaned = 0.000766985 Jy ! Component: 150 - total flux cleaned = 0.000975019 Jy ! Component: 200 - total flux cleaned = 0.00117025 Jy ! Total flux subtracted in 200 components = 0.00117025 Jy ! Clean residual min=-0.008027 max=0.006774 Jy/beam ! Clean residual mean=0.000033 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.213373 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 71 components and 0.213373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213839Jy sigma=0.674011 ! Fit after self-cal, rms=0.213804Jy sigma=0.673963 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213804Jy sigma=0.673963 ! Fit after self-cal, rms=0.213804Jy sigma=0.673963 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.832 mas, bmaj=3.447 mas, bpa=15.19 degrees ! Estimated noise=0.768232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329516 Jy ! Component: 100 - total flux cleaned = 0.000522384 Jy ! Component: 150 - total flux cleaned = 0.00070483 Jy ! Component: 200 - total flux cleaned = 0.000969645 Jy ! Total flux subtracted in 200 components = 0.000969645 Jy ! Clean residual min=-0.008107 max=0.006738 Jy/beam ! Clean residual mean=0.000033 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.214343 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 73 components and 0.214343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213737Jy sigma=0.673015 ! Fit after self-cal, rms=0.213689Jy sigma=0.672820 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288571 Jy ! Component: 100 - total flux cleaned = 0.000461538 Jy ! Component: 150 - total flux cleaned = 0.00071306 Jy ! Component: 200 - total flux cleaned = 0.000870523 Jy ! Total flux subtracted in 200 components = 0.000870523 Jy ! Clean residual min=-0.008123 max=0.006629 Jy/beam ! Clean residual mean=0.000034 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.215213 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 0.215213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213635Jy sigma=0.671994 ! Fit after self-cal, rms=0.213610Jy sigma=0.671974 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213610Jy sigma=0.671974 ! Fit after self-cal, rms=0.213610Jy sigma=0.671974 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.67 mas, bmaj=13.37 mas, bpa=-78.44 degrees ! Estimated noise=1.05392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000896886 Jy ! Component: 100 - total flux cleaned = -0.000695154 Jy ! Component: 150 - total flux cleaned = -0.000518885 Jy ! Component: 200 - total flux cleaned = -0.000364867 Jy ! Total flux subtracted in 200 components = -0.000364867 Jy ! Clean residual min=-0.009381 max=0.008800 Jy/beam ! Clean residual mean=0.000085 rms=0.002862 Jy/beam ! Combined flux in latest and established models = 0.214848 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 89 components and 0.214848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213686Jy sigma=0.671092 ! Fit after self-cal, rms=0.213628Jy sigma=0.670989 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002373 Jy ! Component: 100 - total flux cleaned = 4.55748e-05 Jy ! Component: 150 - total flux cleaned = 0.000375592 Jy ! Component: 200 - total flux cleaned = 0.000674173 Jy ! Total flux subtracted in 200 components = 0.000674173 Jy ! Clean residual min=-0.009277 max=0.008735 Jy/beam ! Clean residual mean=0.000086 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.215523 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 93 components and 0.215523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213690Jy sigma=0.670880 ! Fit after self-cal, rms=0.213664Jy sigma=0.670839 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.832 mas, bmaj=3.447 mas, bpa=15.19 degrees ! Estimated noise=0.768232 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.832 x 3.447 at 15.19 degrees (North through East) ! Clean map min=-0.0078412 max=0.14437 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.513 mas, bmaj=2.904 mas, bpa=9.712 degrees ! Estimated noise=1.33937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.088022 Jy ! Component: 100 - total flux cleaned = 0.118417 Jy ! Component: 150 - total flux cleaned = 0.138908 Jy ! Component: 200 - total flux cleaned = 0.154834 Jy ! Total flux subtracted in 200 components = 0.154834 Jy ! Clean residual min=-0.010228 max=0.012809 Jy/beam ! Clean residual mean=0.000015 rms=0.002224 Jy/beam ! Combined flux in latest and established models = 0.154834 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.154834 Jy ! Inverting map and beam ! Estimated beam: bmin=1.832 mas, bmaj=3.447 mas, bpa=15.19 degrees ! Estimated noise=0.768232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243246 Jy ! Component: 100 - total flux cleaned = 0.0369162 Jy ! Component: 150 - total flux cleaned = 0.0452227 Jy ! Component: 200 - total flux cleaned = 0.0491689 Jy ! Total flux subtracted in 200 components = 0.0491689 Jy ! Clean residual min=-0.007810 max=0.008470 Jy/beam ! Clean residual mean=0.000025 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.204003 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.204003 Jy ! Inverting map ! Added new window around map position (-23, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00501812 Jy ! Component: 100 - total flux cleaned = 0.00646697 Jy ! Component: 150 - total flux cleaned = 0.00732655 Jy ! Component: 200 - total flux cleaned = 0.0081136 Jy ! Total flux subtracted in 200 components = 0.0081136 Jy ! Clean residual min=-0.007625 max=0.007226 Jy/beam ! Clean residual mean=0.000031 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.212117 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 0.212117 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.67 mas, bmaj=13.37 mas, bpa=-78.44 degrees ! Estimated noise=1.05392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223541 Jy ! Component: 100 - total flux cleaned = 0.00328462 Jy ! Component: 150 - total flux cleaned = 0.0039178 Jy ! Component: 200 - total flux cleaned = 0.0040289 Jy ! Total flux subtracted in 200 components = 0.0040289 Jy ! Clean residual min=-0.008566 max=0.008919 Jy/beam ! Clean residual mean=0.000087 rms=0.002874 Jy/beam ! Combined flux in latest and established models = 0.216146 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210391 Jy ! Component: 100 - total flux cleaned = 0.000402397 Jy ! Component: 150 - total flux cleaned = 0.00067186 Jy ! Component: 200 - total flux cleaned = 0.000834127 Jy ! Total flux subtracted in 200 components = 0.000834127 Jy ! Clean residual min=-0.008512 max=0.008822 Jy/beam ! Clean residual mean=0.000088 rms=0.002833 Jy/beam ! Combined flux in latest and established models = 0.21698 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 0.21698 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.832 mas, bmaj=3.447 mas, bpa=15.19 degrees ! Estimated noise=0.768232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000993105 Jy ! Component: 100 - total flux cleaned = -0.000816524 Jy ! Component: 150 - total flux cleaned = -0.000347711 Jy ! Component: 200 - total flux cleaned = -0.000203848 Jy ! Total flux subtracted in 200 components = -0.000203848 Jy ! Clean residual min=-0.007443 max=0.006608 Jy/beam ! Clean residual mean=0.000034 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.216776 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 0.216776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.214185Jy sigma=0.667494 ! Fit after self-cal, rms=0.214174Jy sigma=0.667103 wmodel /scr/pima/gb073_uvs/J1218+1738_S_map.mod ! Writing 82 model components to file: /scr/pima/gb073_uvs/J1218+1738_S_map.mod wobs /scr/pima/gb073_uvs/J1218+1738_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1218+1738_S_uvs.fits wwins /scr/pima/gb073_uvs/J1218+1738_S_map.win ! wwins: Wrote 6 windows to /scr/pima/gb073_uvs/J1218+1738_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309285 Jy ! Component: 100 - total flux cleaned = -0.00310209 Jy ! Component: 150 - total flux cleaned = -0.00232693 Jy ! Component: 200 - total flux cleaned = -0.00157973 Jy ! Component: 250 - total flux cleaned = -0.000751596 Jy ! Component: 300 - total flux cleaned = 0.000352535 Jy ! Component: 350 - total flux cleaned = 0.00142528 Jy ! Component: 400 - total flux cleaned = 0.0023796 Jy ! Component: 450 - total flux cleaned = 0.00350001 Jy ! Component: 500 - total flux cleaned = 0.00450673 Jy ! Component: 550 - total flux cleaned = 0.00567173 Jy ! Component: 600 - total flux cleaned = 0.00681542 Jy ! Component: 650 - total flux cleaned = 0.00794097 Jy ! Component: 700 - total flux cleaned = 0.00904903 Jy ! Component: 750 - total flux cleaned = 0.00989013 Jy ! Component: 800 - total flux cleaned = 0.0111329 Jy ! Component: 850 - total flux cleaned = 0.0118695 Jy ! Component: 900 - total flux cleaned = 0.0130788 Jy ! Component: 950 - total flux cleaned = 0.0140329 Jy ! Component: 1000 - total flux cleaned = 0.0148958 Jy ! Component: 1050 - total flux cleaned = 0.0154392 Jy ! Component: 1100 - total flux cleaned = 0.0162824 Jy ! Component: 1150 - total flux cleaned = 0.016813 Jy ! Component: 1200 - total flux cleaned = 0.0177115 Jy ! Component: 1250 - total flux cleaned = 0.0183028 Jy ! Component: 1300 - total flux cleaned = 0.0186684 Jy ! Component: 1350 - total flux cleaned = 0.0194654 Jy ! Component: 1400 - total flux cleaned = 0.019968 Jy ! Component: 1450 - total flux cleaned = 0.0207485 Jy ! Component: 1500 - total flux cleaned = 0.0215907 Jy ! Component: 1550 - total flux cleaned = 0.0221462 Jy ! Component: 1600 - total flux cleaned = 0.0225595 Jy ! Component: 1650 - total flux cleaned = 0.023581 Jy ! Component: 1700 - total flux cleaned = 0.0240521 Jy ! Component: 1750 - total flux cleaned = 0.0245203 Jy ! Component: 1800 - total flux cleaned = 0.0250506 Jy ! Component: 1850 - total flux cleaned = 0.0257729 Jy ! Component: 1900 - total flux cleaned = 0.0260978 Jy ! Component: 1950 - total flux cleaned = 0.0267429 Jy ! Component: 2000 - total flux cleaned = 0.0272543 Jy ! Component: 2050 - total flux cleaned = 0.0276979 Jy ! Component: 2100 - total flux cleaned = 0.0280122 Jy ! Component: 2150 - total flux cleaned = 0.0282621 Jy ! Component: 2200 - total flux cleaned = 0.0286332 Jy ! Component: 2250 - total flux cleaned = 0.0291235 Jy ! Component: 2300 - total flux cleaned = 0.0293672 Jy ! Component: 2350 - total flux cleaned = 0.0298497 Jy ! Component: 2400 - total flux cleaned = 0.0299096 Jy ! Component: 2450 - total flux cleaned = 0.0305032 Jy ! Component: 2500 - total flux cleaned = 0.0306212 Jy ! Component: 2550 - total flux cleaned = 0.0312053 Jy ! Component: 2600 - total flux cleaned = 0.0312059 Jy ! Component: 2650 - total flux cleaned = 0.0318388 Jy ! Component: 2700 - total flux cleaned = 0.0320663 Jy ! Component: 2750 - total flux cleaned = 0.0324068 Jy ! Component: 2800 - total flux cleaned = 0.032519 Jy ! Component: 2850 - total flux cleaned = 0.0327982 Jy ! Component: 2900 - total flux cleaned = 0.032909 Jy ! Component: 2950 - total flux cleaned = 0.0330746 Jy ! Component: 3000 - total flux cleaned = 0.0333484 Jy ! Component: 3050 - total flux cleaned = 0.0331854 Jy ! Component: 3100 - total flux cleaned = 0.0337258 Jy ! Component: 3150 - total flux cleaned = 0.0338332 Jy ! Component: 3200 - total flux cleaned = 0.0339403 Jy ! Component: 3250 - total flux cleaned = 0.0340466 Jy ! Component: 3300 - total flux cleaned = 0.0342574 Jy ! Component: 3350 - total flux cleaned = 0.0345185 Jy ! Component: 3400 - total flux cleaned = 0.0347777 Jy ! Component: 3450 - total flux cleaned = 0.0348812 Jy ! Component: 3500 - total flux cleaned = 0.0350864 Jy ! Component: 3550 - total flux cleaned = 0.0352899 Jy ! Component: 3600 - total flux cleaned = 0.0353411 Jy ! Component: 3650 - total flux cleaned = 0.0356934 Jy ! Component: 3700 - total flux cleaned = 0.0358936 Jy ! Component: 3750 - total flux cleaned = 0.0358439 Jy ! Component: 3800 - total flux cleaned = 0.0360422 Jy ! Component: 3850 - total flux cleaned = 0.0362881 Jy ! Component: 3900 - total flux cleaned = 0.0361414 Jy ! Component: 3950 - total flux cleaned = 0.0364817 Jy ! Component: 4000 - total flux cleaned = 0.0366749 Jy ! Component: 4050 - total flux cleaned = 0.0370112 Jy ! Total flux subtracted in 4096 components = 0.0371066 Jy ! Clean residual min=-0.002517 max=0.002385 Jy/beam ! Clean residual mean=0.000011 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.253883 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 418 components and 0.253883 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1218+1738_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.832 x 3.447 at 15.19 degrees (North through East) ! Clean map min=-0.0069803 max=0.13744 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1218+1738_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137435 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000826409 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.80393 1.80393 3.60785 7.2157 14.4314 28.8628 57.7256 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.137 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 166.304 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1218+1738_S_uvs.log closed on Sat Dec 26 10:17:39 2015