! Started logfile: /scr/pima/gb073_uvs/J1215+4627_S_uvs.log on Sat Dec 26 10:17:08 2015 obs /scr/pima/gb073_uvs/J1215+4627_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1215+4627_S_uva.fits ! AN table 1: 59 integrations on 55 of 55 possible baselines. ! AN table 2: 58 integrations on 45 of 45 possible baselines. ! AN table 3: 118 integrations on 55 of 55 possible baselines. ! AN table 4: 59 integrations on 45 of 45 possible baselines. ! AN table 5: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.81766 visibilities/baseline/integration-bin. ! Found source: J1215+4627 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 115192 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1215+4627_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! A total of 230 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! A total of 230 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 193 telescope corrections were flagged in sub-array 1. ! A total of 116 telescope corrections were flagged in sub-array 2. ! A total of 230 telescope corrections were flagged in sub-array 3. ! A total of 126 telescope corrections were flagged in sub-array 4. ! A total of 58 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! A total of 116 telescope corrections were flagged in sub-array 2. ! A total of 230 telescope corrections were flagged in sub-array 3. ! A total of 126 telescope corrections were flagged in sub-array 4. ! A total of 58 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 189 telescope corrections were flagged in sub-array 1. ! A total of 116 telescope corrections were flagged in sub-array 2. ! A total of 346 telescope corrections were flagged in sub-array 3. ! A total of 126 telescope corrections were flagged in sub-array 4. ! A total of 58 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 189 telescope corrections were flagged in sub-array 1. ! A total of 116 telescope corrections were flagged in sub-array 2. ! A total of 346 telescope corrections were flagged in sub-array 3. ! A total of 126 telescope corrections were flagged in sub-array 4. ! A total of 58 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 199 telescope corrections were flagged in sub-array 1. ! A total of 116 telescope corrections were flagged in sub-array 2. ! A total of 370 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 144 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! A total of 312 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.022449Jy sigma=6.477201 ! Fit after self-cal, rms=0.911512Jy sigma=5.845612 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.941 mas, bmaj=3.396 mas, bpa=14.2 degrees ! Estimated noise=1.06657 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676343 Jy ! Component: 100 - total flux cleaned = 0.0847166 Jy ! Total flux subtracted in 100 components = 0.0847166 Jy ! Clean residual min=-0.008695 max=0.010360 Jy/beam ! Clean residual mean=0.000013 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.0847166 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0847166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.184273Jy sigma=0.682123 ! Fit after self-cal, rms=0.183761Jy sigma=0.678672 ! Inverting map ! Added new window around map position (-5.5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942828 Jy ! Component: 100 - total flux cleaned = 0.0135066 Jy ! Total flux subtracted in 100 components = 0.0135066 Jy ! Clean residual min=-0.007361 max=0.009036 Jy/beam ! Clean residual mean=0.000011 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.0982232 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.0982232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.182834Jy sigma=0.667381 ! Fit after self-cal, rms=0.182745Jy sigma=0.666956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=4.272 mas, bpa=14.48 degrees ! Estimated noise=0.428712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110655 Jy ! Component: 100 - total flux cleaned = 0.015893 Jy ! Component: 150 - total flux cleaned = 0.0185471 Jy ! Component: 200 - total flux cleaned = 0.019495 Jy ! Total flux subtracted in 200 components = 0.019495 Jy ! Clean residual min=-0.002822 max=0.004780 Jy/beam ! Clean residual mean=0.000011 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.117718 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.117718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.181826Jy sigma=0.663815 ! Fit after self-cal, rms=0.181829Jy sigma=0.663643 ! Inverting map ! Added new window around map position (-2, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457034 Jy ! Component: 100 - total flux cleaned = 0.00515798 Jy ! Component: 150 - total flux cleaned = 0.00539601 Jy ! Component: 200 - total flux cleaned = 0.00560503 Jy ! Total flux subtracted in 200 components = 0.00560503 Jy ! Clean residual min=-0.002852 max=0.003833 Jy/beam ! Clean residual mean=0.000005 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.123323 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.123323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.181683Jy sigma=0.661944 ! Fit after self-cal, rms=0.181635Jy sigma=0.661685 ! Inverting map ! Added new window around map position (-2, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363054 Jy ! Component: 100 - total flux cleaned = 0.00517208 Jy ! Component: 150 - total flux cleaned = 0.00557993 Jy ! Component: 200 - total flux cleaned = 0.00587934 Jy ! Total flux subtracted in 200 components = 0.00587934 Jy ! Clean residual min=-0.002659 max=0.002614 Jy/beam ! Clean residual mean=-0.000001 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.129203 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.129203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.181514Jy sigma=0.660306 ! Fit after self-cal, rms=0.181488Jy sigma=0.660154 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.021 x 4.272 at 14.48 degrees (North through East) ! Clean map min=-0.0023699 max=0.097738 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.91 KP 1.01 LA 1.00 ! MC 0.97 MK 1.10 NL 0.87 OV 0.99 ! PT 1.00 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 1.00 KP 1.02 LA 1.05 ! MK 0.99 NL 0.92 ON 0.86 OV 0.99 ! PT 1.10 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.99 KP 0.96 LA 1.06 ! MC 1.00 MK 0.99 NL 1.07 OV 1.02 ! PT 1.09 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.02 KP 1.06 LA 1.15 ! MK 0.92 NL 0.94 ON 1.04 OV 1.00 ! PT 1.12 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.97 KP 0.98 LA 0.96 ! MC 0.91 MK 0.98 NL 1.08 OV 0.97 ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 0.96 KP 0.84 LA 0.99 ! MC 0.86 MK 1.09 NL 1.02 OV 1.01 ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.00 KP 0.88 LA 1.09 ! MK 0.99 NL 1.09 ON 0.90 OV 1.04 ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.05 KP 0.84 LA 0.84 ! MC 1.00* MK 1.06 NL 1.05 OV 1.03 ! PT 1.07 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.09 KP 0.88 LA 0.94 ! MK 1.16 NL 0.96 ON 1.02 OV 1.00 ! PT 1.09 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* ON 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.181488Jy sigma=0.660154 ! Fit after self-cal, rms=0.180966Jy sigma=0.659469 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=4.278 mas, bpa=14.51 degrees ! Estimated noise=0.428943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127531 Jy ! Component: 100 - total flux cleaned = 0.00165302 Jy ! Component: 150 - total flux cleaned = 0.0019309 Jy ! Component: 200 - total flux cleaned = 0.002129 Jy ! Total flux subtracted in 200 components = 0.002129 Jy ! Clean residual min=-0.002724 max=0.002476 Jy/beam ! Clean residual mean=0.000003 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.131332 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.131332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180889Jy sigma=0.658764 ! Fit after self-cal, rms=0.180882Jy sigma=0.658647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180882Jy sigma=0.658647 ! Fit after self-cal, rms=0.180951Jy sigma=0.658640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.007 mas, bmaj=4.28 mas, bpa=14.47 degrees ! Estimated noise=0.42913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538186 Jy ! Component: 100 - total flux cleaned = 0.000739715 Jy ! Component: 150 - total flux cleaned = 0.000992174 Jy ! Component: 200 - total flux cleaned = 0.00105141 Jy ! Total flux subtracted in 200 components = 0.00105141 Jy ! Clean residual min=-0.002695 max=0.002424 Jy/beam ! Clean residual mean=0.000003 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.132383 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 0.132383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180886Jy sigma=0.658130 ! Fit after self-cal, rms=0.180885Jy sigma=0.658091 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267788 Jy ! Component: 100 - total flux cleaned = 0.000391908 Jy ! Component: 150 - total flux cleaned = 0.000448749 Jy ! Component: 200 - total flux cleaned = 0.000504275 Jy ! Total flux subtracted in 200 components = 0.000504275 Jy ! Clean residual min=-0.002668 max=0.002402 Jy/beam ! Clean residual mean=0.000002 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.132887 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.132887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180829Jy sigma=0.657680 ! Fit after self-cal, rms=0.180819Jy sigma=0.657631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180819Jy sigma=0.657631 ! Fit after self-cal, rms=0.181039Jy sigma=0.657628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=4.281 mas, bpa=14.39 degrees ! Estimated noise=0.429461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186648 Jy ! Component: 100 - total flux cleaned = 0.000243956 Jy ! Component: 150 - total flux cleaned = 0.000299208 Jy ! Component: 200 - total flux cleaned = 0.00040364 Jy ! Total flux subtracted in 200 components = 0.00040364 Jy ! Clean residual min=-0.002641 max=0.002384 Jy/beam ! Clean residual mean=0.000002 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.133291 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.133291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180989Jy sigma=0.657280 ! Fit after self-cal, rms=0.180984Jy sigma=0.657265 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.84337e-05 Jy ! Component: 100 - total flux cleaned = 0.00011098 Jy ! Component: 150 - total flux cleaned = 0.00015971 Jy ! Component: 200 - total flux cleaned = 0.00020837 Jy ! Total flux subtracted in 200 components = 0.00020837 Jy ! Clean residual min=-0.002614 max=0.002369 Jy/beam ! Clean residual mean=0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.133499 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.133499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180943Jy sigma=0.656936 ! Fit after self-cal, rms=0.180935Jy sigma=0.656923 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180935Jy sigma=0.656923 ! Fit after self-cal, rms=0.181151Jy sigma=0.656921 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.14 mas, bmaj=12.52 mas, bpa=-79.76 degrees ! Estimated noise=0.500044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.662e-05 Jy ! Component: 100 - total flux cleaned = -9.98303e-05 Jy ! Component: 150 - total flux cleaned = -0.000118764 Jy ! Component: 200 - total flux cleaned = -0.000136128 Jy ! Total flux subtracted in 200 components = -0.000136128 Jy ! Clean residual min=-0.002255 max=0.001923 Jy/beam ! Clean residual mean=0.000003 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.133363 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.133363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.181152Jy sigma=0.656858 ! Fit after self-cal, rms=0.181152Jy sigma=0.656850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.73894e-05 Jy ! Component: 100 - total flux cleaned = -2.69105e-05 Jy ! Component: 150 - total flux cleaned = -4.20467e-05 Jy ! Component: 200 - total flux cleaned = -5.5875e-05 Jy ! Total flux subtracted in 200 components = -5.5875e-05 Jy ! Clean residual min=-0.002227 max=0.001899 Jy/beam ! Clean residual mean=0.000003 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.133307 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.133307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.181154Jy sigma=0.656821 ! Fit after self-cal, rms=0.181151Jy sigma=0.656817 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=4.282 mas, bpa=14.32 degrees ! Estimated noise=0.429729 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.011 x 4.282 at 14.32 degrees (North through East) ! Clean map min=-0.0047519 max=0.097732 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.937 mas, bmaj=3.402 mas, bpa=14.18 degrees ! Estimated noise=1.06641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0671114 Jy ! Component: 100 - total flux cleaned = 0.0864389 Jy ! Component: 150 - total flux cleaned = 0.0959388 Jy ! Component: 200 - total flux cleaned = 0.10302 Jy ! Total flux subtracted in 200 components = 0.10302 Jy ! Clean residual min=-0.007255 max=0.009168 Jy/beam ! Clean residual mean=0.000012 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.10302 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.10302 Jy ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=4.282 mas, bpa=14.32 degrees ! Estimated noise=0.429729 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139927 Jy ! Component: 100 - total flux cleaned = 0.0204834 Jy ! Component: 150 - total flux cleaned = 0.0227312 Jy ! Component: 200 - total flux cleaned = 0.0235989 Jy ! Total flux subtracted in 200 components = 0.0235989 Jy ! Clean residual min=-0.003054 max=0.003256 Jy/beam ! Clean residual mean=0.000009 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.126619 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.126619 Jy ! Inverting map ! Added new window around map position (-1, 37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152473 Jy ! Component: 100 - total flux cleaned = 0.00225448 Jy ! Component: 150 - total flux cleaned = 0.00269919 Jy ! Component: 200 - total flux cleaned = 0.00322039 Jy ! Total flux subtracted in 200 components = 0.00322039 Jy ! Clean residual min=-0.002773 max=0.002645 Jy/beam ! Clean residual mean=0.000006 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.129839 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.129839 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.14 mas, bmaj=12.52 mas, bpa=-79.76 degrees ! Estimated noise=0.500044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222516 Jy ! Component: 100 - total flux cleaned = 0.00270319 Jy ! Component: 150 - total flux cleaned = 0.00295923 Jy ! Component: 200 - total flux cleaned = 0.00303025 Jy ! Total flux subtracted in 200 components = 0.00303025 Jy ! Clean residual min=-0.002189 max=0.002015 Jy/beam ! Clean residual mean=0.000005 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.132869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.93899e-05 Jy ! Component: 100 - total flux cleaned = -5.60013e-05 Jy ! Component: 150 - total flux cleaned = -5.60279e-05 Jy ! Component: 200 - total flux cleaned = -7.86532e-05 Jy ! Total flux subtracted in 200 components = -7.86532e-05 Jy ! Clean residual min=-0.002151 max=0.002020 Jy/beam ! Clean residual mean=0.000005 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.132791 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.132791 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=4.282 mas, bpa=14.32 degrees ! Estimated noise=0.429729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.75154e-05 Jy ! Component: 100 - total flux cleaned = 8.95597e-05 Jy ! Component: 150 - total flux cleaned = 0.000172642 Jy ! Component: 200 - total flux cleaned = 0.000253462 Jy ! Total flux subtracted in 200 components = 0.000253462 Jy ! Clean residual min=-0.002662 max=0.002472 Jy/beam ! Clean residual mean=0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.133044 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.133044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.181284Jy sigma=0.657296 ! Fit after self-cal, rms=0.181218Jy sigma=0.657160 wmodel /scr/pima/gb073_uvs/J1215+4627_S_map.mod ! Writing 91 model components to file: /scr/pima/gb073_uvs/J1215+4627_S_map.mod wobs /scr/pima/gb073_uvs/J1215+4627_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1215+4627_S_uvs.fits wwins /scr/pima/gb073_uvs/J1215+4627_S_map.win ! wwins: Wrote 5 windows to /scr/pima/gb073_uvs/J1215+4627_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112812 Jy ! Component: 100 - total flux cleaned = -7.18272e-05 Jy ! Component: 150 - total flux cleaned = -3.09886e-05 Jy ! Component: 200 - total flux cleaned = 8.59275e-05 Jy ! Component: 250 - total flux cleaned = 0.000123684 Jy ! Component: 300 - total flux cleaned = 0.000161837 Jy ! Component: 350 - total flux cleaned = 0.000310469 Jy ! Component: 400 - total flux cleaned = 0.000492516 Jy ! Component: 450 - total flux cleaned = 0.000599615 Jy ! Component: 500 - total flux cleaned = 0.000599269 Jy ! Component: 550 - total flux cleaned = 0.000634757 Jy ! Component: 600 - total flux cleaned = 0.000739255 Jy ! Component: 650 - total flux cleaned = 0.000739771 Jy ! Component: 700 - total flux cleaned = 0.000875674 Jy ! Component: 750 - total flux cleaned = 0.000908971 Jy ! Component: 800 - total flux cleaned = 0.00100865 Jy ! Component: 850 - total flux cleaned = 0.00107428 Jy ! Component: 900 - total flux cleaned = 0.0011068 Jy ! Component: 950 - total flux cleaned = 0.00110656 Jy ! Component: 1000 - total flux cleaned = 0.00117099 Jy ! Component: 1050 - total flux cleaned = 0.0012663 Jy ! Component: 1100 - total flux cleaned = 0.00129773 Jy ! Component: 1150 - total flux cleaned = 0.00129771 Jy ! Component: 1200 - total flux cleaned = 0.00129781 Jy ! Component: 1250 - total flux cleaned = 0.00132862 Jy ! Component: 1300 - total flux cleaned = 0.00138968 Jy ! Component: 1350 - total flux cleaned = 0.00144983 Jy ! Component: 1400 - total flux cleaned = 0.00142027 Jy ! Component: 1450 - total flux cleaned = 0.00150918 Jy ! Component: 1500 - total flux cleaned = 0.0013611 Jy ! Component: 1550 - total flux cleaned = 0.00144873 Jy ! Component: 1600 - total flux cleaned = 0.00141947 Jy ! Component: 1650 - total flux cleaned = 0.00133279 Jy ! Component: 1700 - total flux cleaned = 0.00141908 Jy ! Component: 1750 - total flux cleaned = 0.00136195 Jy ! Component: 1800 - total flux cleaned = 0.00141863 Jy ! Component: 1850 - total flux cleaned = 0.00136257 Jy ! Component: 1900 - total flux cleaned = 0.00133454 Jy ! Component: 1950 - total flux cleaned = 0.00136239 Jy ! Component: 2000 - total flux cleaned = 0.00136241 Jy ! Component: 2050 - total flux cleaned = 0.00127967 Jy ! Component: 2100 - total flux cleaned = 0.00130697 Jy ! Component: 2150 - total flux cleaned = 0.00136151 Jy ! Component: 2200 - total flux cleaned = 0.00136132 Jy ! Component: 2250 - total flux cleaned = 0.0012536 Jy ! Component: 2300 - total flux cleaned = 0.00125379 Jy ! Component: 2350 - total flux cleaned = 0.00133356 Jy ! Component: 2400 - total flux cleaned = 0.00133365 Jy ! Component: 2450 - total flux cleaned = 0.00130735 Jy ! Component: 2500 - total flux cleaned = 0.00133369 Jy ! Component: 2550 - total flux cleaned = 0.00138561 Jy ! Component: 2600 - total flux cleaned = 0.0013598 Jy ! Component: 2650 - total flux cleaned = 0.001334 Jy ! Component: 2700 - total flux cleaned = 0.00143663 Jy ! Component: 2750 - total flux cleaned = 0.00138573 Jy ! Component: 2800 - total flux cleaned = 0.00141126 Jy ! Component: 2850 - total flux cleaned = 0.00138614 Jy ! Component: 2900 - total flux cleaned = 0.00136087 Jy ! Component: 2950 - total flux cleaned = 0.00143619 Jy ! Component: 3000 - total flux cleaned = 0.0013863 Jy ! Component: 3050 - total flux cleaned = 0.00148555 Jy ! Component: 3100 - total flux cleaned = 0.00155943 Jy ! Component: 3150 - total flux cleaned = 0.00151037 Jy ! Component: 3200 - total flux cleaned = 0.00148584 Jy ! Component: 3250 - total flux cleaned = 0.00146145 Jy ! Component: 3300 - total flux cleaned = 0.00146134 Jy ! Component: 3350 - total flux cleaned = 0.00148557 Jy ! Component: 3400 - total flux cleaned = 0.00146153 Jy ! Component: 3450 - total flux cleaned = 0.00155715 Jy ! Component: 3500 - total flux cleaned = 0.00148576 Jy ! Component: 3550 - total flux cleaned = 0.00148568 Jy ! Component: 3600 - total flux cleaned = 0.00148571 Jy ! Component: 3650 - total flux cleaned = 0.00146228 Jy ! Component: 3700 - total flux cleaned = 0.00150911 Jy ! Component: 3750 - total flux cleaned = 0.00150911 Jy ! Component: 3800 - total flux cleaned = 0.0014163 Jy ! Component: 3850 - total flux cleaned = 0.00137011 Jy ! Component: 3900 - total flux cleaned = 0.00143922 Jy ! Component: 3950 - total flux cleaned = 0.00155397 Jy ! Component: 4000 - total flux cleaned = 0.00146247 Jy ! Component: 4050 - total flux cleaned = 0.00148529 Jy ! Total flux subtracted in 4096 components = 0.00146265 Jy ! Clean residual min=-0.001136 max=0.001325 Jy/beam ! Clean residual mean=-0.000003 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.134507 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 369 components and 0.134507 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1215+4627_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.011 x 4.282 at 14.32 degrees (North through East) ! Clean map min=-0.0030841 max=0.096936 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1215+4627_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0969363 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000396811 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22806 1.22806 2.45611 4.91223 9.82446 19.6489 39.2978 78.5956 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.096 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 244.288 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1215+4627_S_uvs.log closed on Sat Dec 26 10:17:16 2015