! Started logfile: /scr/pima/gb073_uvs/J1037+5711_S_uvs.log on Sat Dec 26 10:15:42 2015 obs /scr/pima/gb073_uvs/J1037+5711_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J1037+5711_S_uva.fits ! AN table 1: 59 integrations on 55 of 55 possible baselines. ! AN table 2: 59 integrations on 66 of 66 possible baselines. ! AN table 3: 59 integrations on 55 of 55 possible baselines. ! AN table 4: 59 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.922958 visibilities/baseline/integration-bin. ! Found source: J1037+5711 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 100632 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J1037+5711_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! A total of 90 telescope corrections were flagged in sub-array 2. ! A total of 95 telescope corrections were flagged in sub-array 3. ! A total of 89 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! A total of 90 telescope corrections were flagged in sub-array 2. ! A total of 95 telescope corrections were flagged in sub-array 3. ! A total of 89 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 149 telescope corrections were flagged in sub-array 1. ! A total of 148 telescope corrections were flagged in sub-array 2. ! A total of 153 telescope corrections were flagged in sub-array 3. ! A total of 89 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 149 telescope corrections were flagged in sub-array 1. ! A total of 148 telescope corrections were flagged in sub-array 2. ! A total of 153 telescope corrections were flagged in sub-array 3. ! A total of 89 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 149 telescope corrections were flagged in sub-array 1. ! A total of 148 telescope corrections were flagged in sub-array 2. ! A total of 153 telescope corrections were flagged in sub-array 3. ! A total of 147 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 149 telescope corrections were flagged in sub-array 1. ! A total of 148 telescope corrections were flagged in sub-array 2. ! A total of 153 telescope corrections were flagged in sub-array 3. ! A total of 147 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 186 telescope corrections were flagged in sub-array 1. ! A total of 187 telescope corrections were flagged in sub-array 2. ! A total of 127 telescope corrections were flagged in sub-array 3. ! A total of 186 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 130 telescope corrections were flagged in sub-array 1. ! A total of 129 telescope corrections were flagged in sub-array 2. ! A total of 127 telescope corrections were flagged in sub-array 3. ! A total of 186 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.025597Jy sigma=8.664678 ! Fit after self-cal, rms=0.912382Jy sigma=7.979554 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.694 mas, bmaj=2.803 mas, bpa=-21.15 degrees ! Estimated noise=0.78743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0618951 Jy ! Component: 100 - total flux cleaned = 0.0798915 Jy ! Total flux subtracted in 100 components = 0.0798915 Jy ! Clean residual min=-0.007600 max=0.010412 Jy/beam ! Clean residual mean=-0.000011 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.0798915 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0798915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.195376Jy sigma=0.739070 ! Fit after self-cal, rms=0.194736Jy sigma=0.732301 ! Inverting map ! Added new window around map position (2, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012579 Jy ! Component: 100 - total flux cleaned = 0.0211511 Jy ! Total flux subtracted in 100 components = 0.0211511 Jy ! Clean residual min=-0.007489 max=0.009115 Jy/beam ! Clean residual mean=-0.000004 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.101043 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.101043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.192820Jy sigma=0.710823 ! Fit after self-cal, rms=0.192716Jy sigma=0.710211 ! Inverting map ! Added new window around map position (-19, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498617 Jy ! Component: 100 - total flux cleaned = 0.00859728 Jy ! Total flux subtracted in 100 components = 0.00859728 Jy ! Clean residual min=-0.006903 max=0.008183 Jy/beam ! Clean residual mean=-0.000000 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.10964 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.10964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.192233Jy sigma=0.703723 ! Fit after self-cal, rms=0.192074Jy sigma=0.703267 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=3.661 mas, bpa=-17.66 degrees ! Estimated noise=0.380783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675576 Jy ! Component: 100 - total flux cleaned = 0.00892902 Jy ! Component: 150 - total flux cleaned = 0.00914708 Jy ! Component: 200 - total flux cleaned = 0.00905714 Jy ! Total flux subtracted in 200 components = 0.00905714 Jy ! Clean residual min=-0.003399 max=0.004904 Jy/beam ! Clean residual mean=0.000006 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.118697 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.118697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.191510Jy sigma=0.702352 ! Fit after self-cal, rms=0.191401Jy sigma=0.702241 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.186 x 3.661 at -17.66 degrees (North through East) ! Clean map min=-0.0032131 max=0.093059 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.191401Jy sigma=0.702241 ! Fit after self-cal, rms=0.191401Jy sigma=0.702241 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=3.661 mas, bpa=-17.66 degrees ! Estimated noise=0.380783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.29908e-05 Jy ! Component: 100 - total flux cleaned = 2.43045e-06 Jy ! Component: 150 - total flux cleaned = 1.35092e-06 Jy ! Component: 200 - total flux cleaned = -6.53533e-05 Jy ! Total flux subtracted in 200 components = -6.53533e-05 Jy ! Clean residual min=-0.003350 max=0.004495 Jy/beam ! Clean residual mean=0.000005 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.118632 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 0.118632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.191321Jy sigma=0.700919 ! Fit after self-cal, rms=0.191240Jy sigma=0.700842 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.191240Jy sigma=0.700842 ! Fit after self-cal, rms=0.191240Jy sigma=0.700842 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=3.661 mas, bpa=-17.66 degrees ! Estimated noise=0.380783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000412346 Jy ! Component: 100 - total flux cleaned = -0.000471636 Jy ! Component: 150 - total flux cleaned = -0.000470327 Jy ! Component: 200 - total flux cleaned = -0.000421627 Jy ! Total flux subtracted in 200 components = -0.000421627 Jy ! Clean residual min=-0.003347 max=0.004351 Jy/beam ! Clean residual mean=0.000005 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.11821 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.11821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.191194Jy sigma=0.700170 ! Fit after self-cal, rms=0.191144Jy sigma=0.700127 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, -93.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375925 Jy ! Component: 100 - total flux cleaned = 0.00462625 Jy ! Component: 150 - total flux cleaned = 0.00468942 Jy ! Component: 200 - total flux cleaned = 0.00474451 Jy ! Total flux subtracted in 200 components = 0.00474451 Jy ! Clean residual min=-0.003410 max=0.004157 Jy/beam ! Clean residual mean=0.000012 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.122955 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.122955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.191074Jy sigma=0.697997 ! Fit after self-cal, rms=0.190997Jy sigma=0.697794 ! Inverting map ! Added new window around map position (19, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218515 Jy ! Component: 100 - total flux cleaned = 0.00286434 Jy ! Component: 150 - total flux cleaned = 0.0032646 Jy ! Component: 200 - total flux cleaned = 0.00353386 Jy ! Total flux subtracted in 200 components = 0.00353386 Jy ! Clean residual min=-0.003501 max=0.003931 Jy/beam ! Clean residual mean=0.000019 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.126488 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.126488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190912Jy sigma=0.694879 ! Fit after self-cal, rms=0.190731Jy sigma=0.694586 ! Inverting map ! Added new window around map position (75, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362425 Jy ! Component: 100 - total flux cleaned = 0.00527031 Jy ! Component: 150 - total flux cleaned = 0.00595443 Jy ! Component: 200 - total flux cleaned = 0.00637138 Jy ! Total flux subtracted in 200 components = 0.00637138 Jy ! Clean residual min=-0.003218 max=0.003637 Jy/beam ! Clean residual mean=0.000011 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.13286 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 0.13286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190633Jy sigma=0.692491 ! Fit after self-cal, rms=0.190582Jy sigma=0.692330 ! Inverting map ! Added new window around map position (-72, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318983 Jy ! Component: 100 - total flux cleaned = 0.00498828 Jy ! Component: 150 - total flux cleaned = 0.00574078 Jy ! Component: 200 - total flux cleaned = 0.00599479 Jy ! Total flux subtracted in 200 components = 0.00599479 Jy ! Clean residual min=-0.003025 max=0.003399 Jy/beam ! Clean residual mean=0.000006 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.138855 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 91 components and 0.138855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190486Jy sigma=0.690865 ! Fit after self-cal, rms=0.190440Jy sigma=0.690774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190440Jy sigma=0.690774 ! Fit after self-cal, rms=0.190397Jy sigma=0.690580 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=3.662 mas, bpa=-17.66 degrees ! Estimated noise=0.380575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613357 Jy ! Component: 100 - total flux cleaned = 0.000615341 Jy ! Component: 150 - total flux cleaned = 0.000734287 Jy ! Component: 200 - total flux cleaned = 0.000735167 Jy ! Total flux subtracted in 200 components = 0.000735167 Jy ! Clean residual min=-0.002954 max=0.003322 Jy/beam ! Clean residual mean=0.000005 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.13959 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 99 components and 0.13959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190342Jy sigma=0.690150 ! Fit after self-cal, rms=0.190322Jy sigma=0.690125 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024538 Jy ! Component: 100 - total flux cleaned = 0.000301016 Jy ! Component: 150 - total flux cleaned = 0.000355072 Jy ! Component: 200 - total flux cleaned = 0.00035516 Jy ! Total flux subtracted in 200 components = 0.00035516 Jy ! Clean residual min=-0.002924 max=0.003309 Jy/beam ! Clean residual mean=0.000005 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.139945 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 103 components and 0.139945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190278Jy sigma=0.689770 ! Fit after self-cal, rms=0.190260Jy sigma=0.689759 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190260Jy sigma=0.689759 ! Fit after self-cal, rms=0.190271Jy sigma=0.689758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.75 mas, bmaj=11.29 mas, bpa=64.74 degrees ! Estimated noise=0.523359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366763 Jy ! Component: 100 - total flux cleaned = 0.00105005 Jy ! Component: 150 - total flux cleaned = 0.00151895 Jy ! Component: 200 - total flux cleaned = 0.00173266 Jy ! Total flux subtracted in 200 components = 0.00173266 Jy ! Clean residual min=-0.004067 max=0.004121 Jy/beam ! Clean residual mean=0.000010 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.141678 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 110 components and 0.141678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190299Jy sigma=0.689270 ! Fit after self-cal, rms=0.190258Jy sigma=0.689151 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04905e-05 Jy ! Component: 100 - total flux cleaned = 0.000314341 Jy ! Component: 150 - total flux cleaned = 0.000535899 Jy ! Component: 200 - total flux cleaned = 0.000732739 Jy ! Total flux subtracted in 200 components = 0.000732739 Jy ! Clean residual min=-0.004066 max=0.004023 Jy/beam ! Clean residual mean=0.000010 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.14241 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.14241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.190276Jy sigma=0.688935 ! Fit after self-cal, rms=0.190252Jy sigma=0.688875 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=3.663 mas, bpa=-17.66 degrees ! Estimated noise=0.380577 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.186 x 3.663 at -17.66 degrees (North through East) ! Clean map min=-0.004864 max=0.097702 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.693 mas, bmaj=2.803 mas, bpa=-21.15 degrees ! Estimated noise=0.787444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611457 Jy ! Component: 100 - total flux cleaned = 0.0807569 Jy ! Component: 150 - total flux cleaned = 0.0945888 Jy ! Component: 200 - total flux cleaned = 0.103612 Jy ! Total flux subtracted in 200 components = 0.103612 Jy ! Clean residual min=-0.006307 max=0.007693 Jy/beam ! Clean residual mean=-0.000002 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.103612 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.103612 Jy ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=3.663 mas, bpa=-17.66 degrees ! Estimated noise=0.380577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132017 Jy ! Component: 100 - total flux cleaned = 0.0200349 Jy ! Component: 150 - total flux cleaned = 0.0234323 Jy ! Component: 200 - total flux cleaned = 0.02471 Jy ! Total flux subtracted in 200 components = 0.02471 Jy ! Clean residual min=-0.003803 max=0.004537 Jy/beam ! Clean residual mean=0.000008 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.128322 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.128322 Jy ! Inverting map ! Added new window around map position (6.5, -38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241647 Jy ! Component: 100 - total flux cleaned = 0.00348114 Jy ! Component: 150 - total flux cleaned = 0.00446174 Jy ! Component: 200 - total flux cleaned = 0.00523822 Jy ! Total flux subtracted in 200 components = 0.00523822 Jy ! Clean residual min=-0.003285 max=0.003891 Jy/beam ! Clean residual mean=0.000011 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.13356 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 50 components and 0.13356 Jy ! Inverting map ! Added new window around map position (17.5, 87.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201658 Jy ! Component: 100 - total flux cleaned = 0.00271405 Jy ! Component: 150 - total flux cleaned = 0.00347979 Jy ! Component: 200 - total flux cleaned = 0.00399642 Jy ! Total flux subtracted in 200 components = 0.00399642 Jy ! Clean residual min=-0.003086 max=0.003705 Jy/beam ! Clean residual mean=0.000011 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.137557 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 66 components and 0.137557 Jy ! Inverting map ! Added new window around map position (28, -104.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034677 Jy ! Component: 100 - total flux cleaned = 0.00405459 Jy ! Component: 150 - total flux cleaned = 0.00451169 Jy ! Component: 200 - total flux cleaned = 0.00486307 Jy ! Total flux subtracted in 200 components = 0.00486307 Jy ! Clean residual min=-0.003048 max=0.003376 Jy/beam ! Clean residual mean=0.000016 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.14242 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 82 components and 0.14242 Jy ! Inverting map ! Added new window around map position (18.5, 124.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296784 Jy ! Component: 100 - total flux cleaned = 0.00373644 Jy ! Component: 150 - total flux cleaned = 0.00414046 Jy ! Component: 200 - total flux cleaned = 0.00452914 Jy ! Total flux subtracted in 200 components = 0.00452914 Jy ! Clean residual min=-0.003000 max=0.003230 Jy/beam ! Clean residual mean=0.000018 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.146949 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 96 components and 0.146949 Jy ! Inverting map ! Added new window around map position (8.5, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159505 Jy ! Component: 100 - total flux cleaned = 0.00181872 Jy ! Component: 150 - total flux cleaned = 0.0020403 Jy ! Component: 200 - total flux cleaned = 0.00225282 Jy ! Total flux subtracted in 200 components = 0.00225282 Jy ! Clean residual min=-0.002929 max=0.003223 Jy/beam ! Clean residual mean=0.000022 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.149202 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 114 components and 0.149202 Jy ! Inverting map ! Added new window around map position (-12, -83). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196279 Jy ! Component: 100 - total flux cleaned = 0.00238664 Jy ! Component: 150 - total flux cleaned = 0.00252111 Jy ! Component: 200 - total flux cleaned = 0.00265345 Jy ! Total flux subtracted in 200 components = 0.00265345 Jy ! Clean residual min=-0.002925 max=0.003031 Jy/beam ! Clean residual mean=0.000024 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.151855 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 129 components and 0.151855 Jy ! Inverting map ! Added new window around map position (-70, -92.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194773 Jy ! Component: 100 - total flux cleaned = 0.00228022 Jy ! Component: 150 - total flux cleaned = 0.00253506 Jy ! Component: 200 - total flux cleaned = 0.00272062 Jy ! Total flux subtracted in 200 components = 0.00272062 Jy ! Clean residual min=-0.002890 max=0.002788 Jy/beam ! Clean residual mean=0.000022 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.154576 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 139 components and 0.154576 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.75 mas, bmaj=11.29 mas, bpa=64.74 degrees ! Estimated noise=0.523359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105744 Jy ! Component: 100 - total flux cleaned = 0.00177951 Jy ! Component: 150 - total flux cleaned = 0.00232394 Jy ! Component: 200 - total flux cleaned = 0.00287547 Jy ! Total flux subtracted in 200 components = 0.00287547 Jy ! Clean residual min=-0.003271 max=0.003467 Jy/beam ! Clean residual mean=0.000055 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.157451 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467461 Jy ! Component: 100 - total flux cleaned = 0.000904752 Jy ! Component: 150 - total flux cleaned = 0.00123382 Jy ! Component: 200 - total flux cleaned = 0.00157989 Jy ! Total flux subtracted in 200 components = 0.00157989 Jy ! Clean residual min=-0.003220 max=0.003423 Jy/beam ! Clean residual mean=0.000056 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.159031 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 159 components and 0.159031 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.186 mas, bmaj=3.663 mas, bpa=-17.66 degrees ! Estimated noise=0.380577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273768 Jy ! Component: 100 - total flux cleaned = -0.000333232 Jy ! Component: 150 - total flux cleaned = -0.000333254 Jy ! Component: 200 - total flux cleaned = -0.000390144 Jy ! Total flux subtracted in 200 components = -0.000390144 Jy ! Clean residual min=-0.002870 max=0.002785 Jy/beam ! Clean residual mean=0.000022 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.158641 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 174 components and 0.158641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.189902Jy sigma=0.683724 ! Fit after self-cal, rms=0.189593Jy sigma=0.682945 wmodel /scr/pima/gb073_uvs/J1037+5711_S_map.mod ! Writing 174 model components to file: /scr/pima/gb073_uvs/J1037+5711_S_map.mod wobs /scr/pima/gb073_uvs/J1037+5711_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J1037+5711_S_uvs.fits wwins /scr/pima/gb073_uvs/J1037+5711_S_map.win ! wwins: Wrote 14 windows to /scr/pima/gb073_uvs/J1037+5711_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000909446 Jy ! Component: 100 - total flux cleaned = 0.00155892 Jy ! Component: 150 - total flux cleaned = 0.00213775 Jy ! Component: 200 - total flux cleaned = 0.0026056 Jy ! Component: 250 - total flux cleaned = 0.00301645 Jy ! Component: 300 - total flux cleaned = 0.00341857 Jy ! Component: 350 - total flux cleaned = 0.00385611 Jy ! Component: 400 - total flux cleaned = 0.0041564 Jy ! Component: 450 - total flux cleaned = 0.0045362 Jy ! Component: 500 - total flux cleaned = 0.00490964 Jy ! Component: 550 - total flux cleaned = 0.00527732 Jy ! Component: 600 - total flux cleaned = 0.0055989 Jy ! Component: 650 - total flux cleaned = 0.00595567 Jy ! Component: 700 - total flux cleaned = 0.00638555 Jy ! Component: 750 - total flux cleaned = 0.00684744 Jy ! Component: 800 - total flux cleaned = 0.00718933 Jy ! Component: 850 - total flux cleaned = 0.00756442 Jy ! Component: 900 - total flux cleaned = 0.00793488 Jy ! Component: 950 - total flux cleaned = 0.00819111 Jy ! Component: 1000 - total flux cleaned = 0.0084091 Jy ! Component: 1050 - total flux cleaned = 0.00873249 Jy ! Component: 1100 - total flux cleaned = 0.00894547 Jy ! Component: 1150 - total flux cleaned = 0.00926211 Jy ! Component: 1200 - total flux cleaned = 0.00947145 Jy ! Component: 1250 - total flux cleaned = 0.0097819 Jy ! Component: 1300 - total flux cleaned = 0.0100553 Jy ! Component: 1350 - total flux cleaned = 0.0102248 Jy ! Component: 1400 - total flux cleaned = 0.0104597 Jy ! Component: 1450 - total flux cleaned = 0.0108255 Jy ! Component: 1500 - total flux cleaned = 0.0108912 Jy ! Component: 1550 - total flux cleaned = 0.0112184 Jy ! Component: 1600 - total flux cleaned = 0.0113479 Jy ! Component: 1650 - total flux cleaned = 0.0115732 Jy ! Component: 1700 - total flux cleaned = 0.0116688 Jy ! Component: 1750 - total flux cleaned = 0.0120488 Jy ! Component: 1800 - total flux cleaned = 0.0120175 Jy ! Component: 1850 - total flux cleaned = 0.0122674 Jy ! Component: 1900 - total flux cleaned = 0.0124531 Jy ! Component: 1950 - total flux cleaned = 0.0125148 Jy ! Component: 2000 - total flux cleaned = 0.0127894 Jy ! Component: 2050 - total flux cleaned = 0.012911 Jy ! Component: 2100 - total flux cleaned = 0.0130012 Jy ! Component: 2150 - total flux cleaned = 0.013151 Jy ! Component: 2200 - total flux cleaned = 0.0133295 Jy ! Component: 2250 - total flux cleaned = 0.013418 Jy ! Component: 2300 - total flux cleaned = 0.0135939 Jy ! Component: 2350 - total flux cleaned = 0.0137105 Jy ! Component: 2400 - total flux cleaned = 0.0138551 Jy ! Component: 2450 - total flux cleaned = 0.0139414 Jy ! Component: 2500 - total flux cleaned = 0.014027 Jy ! Component: 2550 - total flux cleaned = 0.0141976 Jy ! Component: 2600 - total flux cleaned = 0.0142541 Jy ! Component: 2650 - total flux cleaned = 0.0142821 Jy ! Component: 2700 - total flux cleaned = 0.01431 Jy ! Component: 2750 - total flux cleaned = 0.014421 Jy ! Component: 2800 - total flux cleaned = 0.0145039 Jy ! Component: 2850 - total flux cleaned = 0.0146682 Jy ! Component: 2900 - total flux cleaned = 0.0146953 Jy ! Component: 2950 - total flux cleaned = 0.0146953 Jy ! Component: 3000 - total flux cleaned = 0.014695 Jy ! Component: 3050 - total flux cleaned = 0.0148022 Jy ! Component: 3100 - total flux cleaned = 0.0148556 Jy ! Component: 3150 - total flux cleaned = 0.0148558 Jy ! Component: 3200 - total flux cleaned = 0.01504 Jy ! Component: 3250 - total flux cleaned = 0.0151185 Jy ! Component: 3300 - total flux cleaned = 0.0150924 Jy ! Component: 3350 - total flux cleaned = 0.0151959 Jy ! Component: 3400 - total flux cleaned = 0.0152732 Jy ! Component: 3450 - total flux cleaned = 0.0154272 Jy ! Component: 3500 - total flux cleaned = 0.0153761 Jy ! Component: 3550 - total flux cleaned = 0.0153509 Jy ! Component: 3600 - total flux cleaned = 0.0154015 Jy ! Component: 3650 - total flux cleaned = 0.0153263 Jy ! Component: 3700 - total flux cleaned = 0.0154757 Jy ! Component: 3750 - total flux cleaned = 0.0155004 Jy ! Component: 3800 - total flux cleaned = 0.0155005 Jy ! Component: 3850 - total flux cleaned = 0.0155739 Jy ! Component: 3900 - total flux cleaned = 0.0155247 Jy ! Component: 3950 - total flux cleaned = 0.0155005 Jy ! Component: 4000 - total flux cleaned = 0.0155732 Jy ! Component: 4050 - total flux cleaned = 0.0156454 Jy ! Total flux subtracted in 4096 components = 0.0155737 Jy ! Clean residual min=-0.001459 max=0.001371 Jy/beam ! Clean residual mean=0.000012 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.174215 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 501 components and 0.174215 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J1037+5711_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.186 x 3.663 at -17.66 degrees (North through East) ! Clean map min=-0.0044461 max=0.097902 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J1037+5711_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0979023 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000409166 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2538 1.2538 2.5076 5.0152 10.0304 20.0608 40.1216 80.2432 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 239.272 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J1037+5711_S_uvs.log closed on Sat Dec 26 10:15:52 2015