! Started logfile: /scr/pima/gb073_uvs/J0958+4725_X_uvs.log on Sat Dec 26 09:35:42 2015 obs /scr/pima/gb073_uvs/J0958+4725_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0958+4725_X_uva.fits ! AN table 1: 5 integrations on 55 of 55 possible baselines. ! AN table 2: 5 integrations on 6 of 6 possible baselines. ! AN table 3: 6 integrations on 66 of 66 possible baselines. ! AN table 4: 5 integrations on 3 of 3 possible baselines. ! AN table 5: 6 integrations on 55 of 55 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0958+4725 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8368 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0958+4725_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.190181Jy sigma=11.763279 ! Fit after self-cal, rms=0.443048Jy sigma=3.829036 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.77% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.5116 mas, bmaj=1.001 mas, bpa=-47.78 degrees ! Estimated noise=1.45881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.443772 Jy ! Component: 100 - total flux cleaned = 0.563925 Jy ! Total flux subtracted in 100 components = 0.563925 Jy ! Clean residual min=-0.018974 max=0.054745 Jy/beam ! Clean residual mean=0.000006 rms=0.005111 Jy/beam ! Combined flux in latest and established models = 0.563925 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.563925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.161227Jy sigma=1.566706 ! Fit after self-cal, rms=0.161129Jy sigma=1.566097 ! Inverting map ! Your choice of large map pixels excluded 0.77% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0651767 Jy ! Component: 100 - total flux cleaned = 0.106629 Jy ! Total flux subtracted in 100 components = 0.106629 Jy ! Clean residual min=-0.015333 max=0.022054 Jy/beam ! Clean residual mean=0.000002 rms=0.003312 Jy/beam ! Combined flux in latest and established models = 0.670554 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.670554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.126060Jy sigma=1.051835 ! Fit after self-cal, rms=0.125859Jy sigma=1.050237 ! Inverting map ! Your choice of large map pixels excluded 0.77% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (1, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283953 Jy ! Component: 100 - total flux cleaned = 0.0483677 Jy ! Total flux subtracted in 100 components = 0.0483677 Jy ! Clean residual min=-0.014252 max=0.016477 Jy/beam ! Clean residual mean=0.000001 rms=0.002818 Jy/beam ! Combined flux in latest and established models = 0.718922 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.718922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.117786Jy sigma=0.915125 ! Fit after self-cal, rms=0.117608Jy sigma=0.913457 ! Inverting map ! Your choice of large map pixels excluded 0.77% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.77% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6283 mas, bmaj=1.119 mas, bpa=-45.01 degrees ! Estimated noise=0.94974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203255 Jy ! Component: 100 - total flux cleaned = 0.0324414 Jy ! Component: 150 - total flux cleaned = 0.0400594 Jy ! Component: 200 - total flux cleaned = 0.0430536 Jy ! Total flux subtracted in 200 components = 0.0430536 Jy ! Clean residual min=-0.010584 max=0.011940 Jy/beam ! Clean residual mean=0.000001 rms=0.002074 Jy/beam ! Combined flux in latest and established models = 0.761975 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.761975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.114711Jy sigma=0.860193 ! Fit after self-cal, rms=0.114626Jy sigma=0.859192 ! Inverting map ! Your choice of large map pixels excluded 0.77% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (9, 15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722706 Jy ! Component: 100 - total flux cleaned = 0.0080837 Jy ! Component: 150 - total flux cleaned = 0.00911238 Jy ! Component: 200 - total flux cleaned = 0.0102343 Jy ! Total flux subtracted in 200 components = 0.0102343 Jy ! Clean residual min=-0.010362 max=0.010563 Jy/beam ! Clean residual mean=0.000001 rms=0.001983 Jy/beam ! Combined flux in latest and established models = 0.772209 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.772209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.112850Jy sigma=0.845033 ! Fit after self-cal, rms=0.112740Jy sigma=0.843969 ! Inverting map ! Your choice of large map pixels excluded 0.77% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6283 x 1.119 at -45.01 degrees (North through East) ! Clean map min=-0.0086639 max=0.59095 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 EF 1.00* FD 0.98 KP 0.99 ! LA 1.05 MC 0.91 MK 0.96 NL 0.96 ! OV 1.01 PT 0.95 SC 0.98 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 EF 1.00* FD 0.97 KP 0.98 ! LA 1.03 MC 0.98 NL 0.94 ON 1.02 ! OV 0.98 PT 0.98 SC 0.96 ZC 0.85 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 EF 1.00* FD 0.96 KP 1.02 ! LA 1.04 MC 1.01 MK 0.99 NL 0.94 ! ON 0.94 PT 0.94 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 EF 1.00* FD 1.03 KP 1.01 ! LA 1.07 MC 0.87 MK 1.01 NL 0.98 ! OV 1.02 PT 1.01 SC 1.03 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 EF 1.00* FD 1.02 KP 1.01 ! LA 1.05 MC 1.00 NL 0.98 ON 1.01 ! OV 1.03 PT 1.00 SC 0.99 ZC 0.86 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 EF 1.00* FD 1.02 KP 1.01 ! LA 1.05 MC 0.97 MK 1.03 NL 0.97 ! ON 1.01 PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 EF 1.00* FD 1.01 KP 0.96 ! LA 0.98 MC 0.91 MK 0.93 NL 0.97 ! OV 0.99 PT 1.03 SC 1.04 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 EF 1.00* FD 1.00 KP 0.97 ! LA 0.99 MC 0.97 NL 0.97 ON 1.03 ! OV 1.00 PT 1.00 SC 1.02 ZC 0.83 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 EF 1.00* FD 1.00 KP 0.95 ! LA 0.99 MC 1.00 MK 1.00 NL 0.94 ! ON 0.94 PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 EF 1.00* FD 1.03 KP 0.96 ! LA 1.00 MC 0.92 MK 0.97 NL 0.98 ! OV 1.01 PT 1.02 SC 1.03 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 EF 1.00* FD 1.00 KP 0.99 ! LA 1.00 MC 1.00 NL 0.98 ON 1.00 ! OV 1.01 PT 1.02 SC 1.01 ZC 0.86 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 EF 1.00* FD 1.04 KP 0.98 ! LA 1.01 MC 1.02 MK 0.98 NL 0.97 ! ON 0.97 PT 1.01 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.01 KP 0.91 ! LA 1.00 MC 1.10 MK 1.00 NL 1.00 ! OV 1.06 PT 0.97 SC 1.06 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.03 KP 0.91 ! LA 1.00 MC 1.28 NL 1.03 ON 1.28 ! OV 1.03 PT 0.99 SC 1.04 ZC 0.84 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.01 KP 0.91 ! LA 1.01 MC 1.24 MK 1.00 NL 0.99 ! ON 1.18 PT 0.97 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.05 KP 0.88 ! LA 0.99 MC 1.15 MK 0.99 NL 1.01 ! OV 1.05 PT 0.95 SC 0.98 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.03 KP 0.88 ! LA 0.99 MC 1.20 NL 1.02 ON 1.36 ! OV 1.06 PT 0.92 SC 0.96 ZC 0.83 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.03 KP 0.90 ! LA 1.01 MC 1.24 MK 1.00 NL 0.98 ! ON 1.21 PT 0.93 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 EF 1.00* FD 1.08 KP 0.92 ! LA 1.04 MC 1.23 MK 1.06 NL 1.04 ! OV 1.01 PT 1.00 SC 1.05 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 EF 1.00* FD 1.05 KP 0.90 ! LA 1.05 MC 1.36 NL 1.04 ON 1.36 ! OV 1.02 PT 1.01 SC 1.03 ZC 0.66 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 EF 1.00* FD 1.06 KP 0.91 ! LA 1.05 MC 1.33 MK 1.06 NL 1.02 ! ON 1.33 PT 1.00 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 EF 1.00* FD 1.02 KP 0.91 ! LA 1.05 MC 1.24 MK 1.06 NL 1.03 ! OV 1.03 PT 1.02 SC 1.05 ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MK 0.00* OV 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 EF 1.00* FD 1.06 KP 0.90 ! LA 1.03 MC 1.39 NL 1.04 ON 1.33 ! OV 1.02 PT 1.00 SC 0.99 ZC 0.66 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 EF 1.00* FD 1.01 KP 0.92 ! LA 1.06 MC 1.33 MK 1.08 NL 1.00 ! ON 1.32 PT 0.98 SC 1.02 ! ! ! Fit before self-cal, rms=0.112740Jy sigma=0.843969 ! Fit after self-cal, rms=0.093761Jy sigma=0.660686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.63 mas, bmaj=1.132 mas, bpa=-45.95 degrees ! Estimated noise=0.968349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00337855 Jy ! Component: 100 - total flux cleaned = -0.00437623 Jy ! Component: 150 - total flux cleaned = -0.00462232 Jy ! Component: 200 - total flux cleaned = -0.00483525 Jy ! Total flux subtracted in 200 components = -0.00483525 Jy ! Clean residual min=-0.003841 max=0.003464 Jy/beam ! Clean residual mean=0.000000 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.767374 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.767374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093291Jy sigma=0.656841 ! Fit after self-cal, rms=0.093362Jy sigma=0.656469 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093362Jy sigma=0.656469 ! Fit after self-cal, rms=0.093432Jy sigma=0.655896 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6308 mas, bmaj=1.132 mas, bpa=-45.9 degrees ! Estimated noise=0.967197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00293609 Jy ! Component: 100 - total flux cleaned = -0.00336231 Jy ! Component: 150 - total flux cleaned = -0.0033569 Jy ! Component: 200 - total flux cleaned = -0.00343603 Jy ! Total flux subtracted in 200 components = -0.00343603 Jy ! Clean residual min=-0.003516 max=0.003190 Jy/beam ! Clean residual mean=0.000000 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.763938 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.763938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093145Jy sigma=0.653748 ! Fit after self-cal, rms=0.093137Jy sigma=0.653657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000437887 Jy ! Component: 100 - total flux cleaned = -0.000514538 Jy ! Component: 150 - total flux cleaned = -0.000654789 Jy ! Component: 200 - total flux cleaned = -0.000785213 Jy ! Total flux subtracted in 200 components = -0.000785213 Jy ! Clean residual min=-0.003387 max=0.003120 Jy/beam ! Clean residual mean=0.000000 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.763153 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.763153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093016Jy sigma=0.652598 ! Fit after self-cal, rms=0.093010Jy sigma=0.652559 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093010Jy sigma=0.652559 ! Fit after self-cal, rms=0.093222Jy sigma=0.652006 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6317 mas, bmaj=1.132 mas, bpa=-45.8 degrees ! Estimated noise=0.96671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237406 Jy ! Component: 100 - total flux cleaned = -0.00252793 Jy ! Component: 150 - total flux cleaned = -0.00259671 Jy ! Component: 200 - total flux cleaned = -0.00272385 Jy ! Total flux subtracted in 200 components = -0.00272385 Jy ! Clean residual min=-0.003206 max=0.003036 Jy/beam ! Clean residual mean=0.000000 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.760429 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.760429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093052Jy sigma=0.650912 ! Fit after self-cal, rms=0.093054Jy sigma=0.650884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00038358 Jy ! Component: 100 - total flux cleaned = -0.000440503 Jy ! Component: 150 - total flux cleaned = -0.000549645 Jy ! Component: 200 - total flux cleaned = -0.000650868 Jy ! Total flux subtracted in 200 components = -0.000650868 Jy ! Clean residual min=-0.003199 max=0.002990 Jy/beam ! Clean residual mean=0.000000 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.759778 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.759778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092983Jy sigma=0.650266 ! Fit after self-cal, rms=0.092979Jy sigma=0.650246 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092979Jy sigma=0.650246 ! Fit after self-cal, rms=0.093204Jy sigma=0.649939 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.411 mas, bmaj=2.95 mas, bpa=0.2076 degrees ! Estimated noise=1.27485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014429 Jy ! Component: 100 - total flux cleaned = -0.00195158 Jy ! Component: 150 - total flux cleaned = -0.00195546 Jy ! Component: 200 - total flux cleaned = -0.00197435 Jy ! Total flux subtracted in 200 components = -0.00197435 Jy ! Clean residual min=-0.003103 max=0.003137 Jy/beam ! Clean residual mean=0.000000 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.757804 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.757804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093160Jy sigma=0.649833 ! Fit after self-cal, rms=0.093162Jy sigma=0.649815 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138426 Jy ! Component: 100 - total flux cleaned = -0.000124662 Jy ! Component: 150 - total flux cleaned = -0.000113548 Jy ! Component: 200 - total flux cleaned = -8.11648e-05 Jy ! Total flux subtracted in 200 components = -8.11648e-05 Jy ! Clean residual min=-0.003103 max=0.003103 Jy/beam ! Clean residual mean=0.000000 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.757723 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.757723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093159Jy sigma=0.649833 ! Fit after self-cal, rms=0.093159Jy sigma=0.649831 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6325 mas, bmaj=1.133 mas, bpa=-45.71 degrees ! Estimated noise=0.966388 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6325 x 1.133 at -45.71 degrees (North through East) ! Clean map min=-0.0028891 max=0.59337 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093159Jy sigma=0.649831 ! Fit after self-cal, rms=0.089284Jy sigma=0.616088 ! Inverting map and beam ! Estimated beam: bmin=0.6328 mas, bmaj=1.133 mas, bpa=-45.67 degrees ! Estimated noise=0.965552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113342 Jy ! Component: 100 - total flux cleaned = -0.00144041 Jy ! Component: 150 - total flux cleaned = -0.00165609 Jy ! Component: 200 - total flux cleaned = -0.00175546 Jy ! Total flux subtracted in 200 components = -0.00175546 Jy ! Clean residual min=-0.003113 max=0.002998 Jy/beam ! Clean residual mean=-0.000000 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.755967 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.755967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089182Jy sigma=0.615346 ! Fit after self-cal, rms=0.089182Jy sigma=0.615333 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247806 Jy ! Component: 100 - total flux cleaned = -0.000248249 Jy ! Component: 150 - total flux cleaned = -0.000292538 Jy ! Component: 200 - total flux cleaned = -0.000335023 Jy ! Total flux subtracted in 200 components = -0.000335023 Jy ! Clean residual min=-0.003120 max=0.002975 Jy/beam ! Clean residual mean=-0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.755632 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.755632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089134Jy sigma=0.614919 ! Fit after self-cal, rms=0.089132Jy sigma=0.614913 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089132Jy sigma=0.614913 ! Fit after self-cal, rms=0.089289Jy sigma=0.614744 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5139 mas, bmaj=1.014 mas, bpa=-48.47 degrees ! Estimated noise=1.50396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.446659 Jy ! Component: 100 - total flux cleaned = 0.56454 Jy ! Component: 150 - total flux cleaned = 0.626959 Jy ! Component: 200 - total flux cleaned = 0.666573 Jy ! Total flux subtracted in 200 components = 0.666573 Jy ! Clean residual min=-0.007717 max=0.021232 Jy/beam ! Clean residual mean=0.000001 rms=0.002108 Jy/beam ! Combined flux in latest and established models = 0.666573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.666573 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6334 mas, bmaj=1.133 mas, bpa=-45.59 degrees ! Estimated noise=0.965155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369701 Jy ! Component: 100 - total flux cleaned = 0.0570428 Jy ! Component: 150 - total flux cleaned = 0.0685746 Jy ! Component: 200 - total flux cleaned = 0.0754218 Jy ! Total flux subtracted in 200 components = 0.0754218 Jy ! Clean residual min=-0.003397 max=0.003898 Jy/beam ! Clean residual mean=-0.000001 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.741994 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 39 components and 0.741994 Jy ! Inverting map ! Added new window around map position (-33.8, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446252 Jy ! Component: 100 - total flux cleaned = 0.00722913 Jy ! Component: 150 - total flux cleaned = 0.00845369 Jy ! Component: 200 - total flux cleaned = 0.00917111 Jy ! Total flux subtracted in 200 components = 0.00917111 Jy ! Clean residual min=-0.003071 max=0.002880 Jy/beam ! Clean residual mean=-0.000001 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.751166 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 0.751165 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.411 mas, bmaj=2.95 mas, bpa=0.2686 degrees ! Estimated noise=1.27113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258682 Jy ! Component: 100 - total flux cleaned = 0.00337462 Jy ! Component: 150 - total flux cleaned = 0.00364599 Jy ! Component: 200 - total flux cleaned = 0.00373523 Jy ! Total flux subtracted in 200 components = 0.00373523 Jy ! Clean residual min=-0.002823 max=0.002911 Jy/beam ! Clean residual mean=-0.000001 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.754901 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.32458e-05 Jy ! Component: 100 - total flux cleaned = 0.000202717 Jy ! Component: 150 - total flux cleaned = 0.00023146 Jy ! Component: 200 - total flux cleaned = 0.000272463 Jy ! Total flux subtracted in 200 components = 0.000272463 Jy ! Clean residual min=-0.002825 max=0.002928 Jy/beam ! Clean residual mean=-0.000001 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.755173 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.755173 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6334 mas, bmaj=1.133 mas, bpa=-45.59 degrees ! Estimated noise=0.965155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.31133e-05 Jy ! Component: 100 - total flux cleaned = 0.000160109 Jy ! Component: 150 - total flux cleaned = 0.000416728 Jy ! Component: 200 - total flux cleaned = 0.000647198 Jy ! Total flux subtracted in 200 components = 0.000647198 Jy ! Clean residual min=-0.002884 max=0.002885 Jy/beam ! Clean residual mean=-0.000000 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.75582 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 0.75582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.089095Jy sigma=0.613716 ! Fit after self-cal, rms=0.089056Jy sigma=0.613346 wmodel /scr/pima/gb073_uvs/J0958+4725_X_map.mod ! Writing 82 model components to file: /scr/pima/gb073_uvs/J0958+4725_X_map.mod wobs /scr/pima/gb073_uvs/J0958+4725_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0958+4725_X_uvs.fits wwins /scr/pima/gb073_uvs/J0958+4725_X_map.win ! wwins: Wrote 4 windows to /scr/pima/gb073_uvs/J0958+4725_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.18242e-05 Jy ! Component: 100 - total flux cleaned = -0.00025175 Jy ! Component: 150 - total flux cleaned = -0.000344377 Jy ! Component: 200 - total flux cleaned = -0.00047851 Jy ! Component: 250 - total flux cleaned = -0.000696272 Jy ! Component: 300 - total flux cleaned = -0.000951064 Jy ! Component: 350 - total flux cleaned = -0.00124236 Jy ! Component: 400 - total flux cleaned = -0.00132422 Jy ! Component: 450 - total flux cleaned = -0.00160762 Jy ! Component: 500 - total flux cleaned = -0.00188728 Jy ! Component: 550 - total flux cleaned = -0.00224147 Jy ! Component: 600 - total flux cleaned = -0.00259081 Jy ! Component: 650 - total flux cleaned = -0.00274438 Jy ! Component: 700 - total flux cleaned = -0.00297228 Jy ! Component: 750 - total flux cleaned = -0.0032729 Jy ! Component: 800 - total flux cleaned = -0.00349565 Jy ! Component: 850 - total flux cleaned = -0.00371674 Jy ! Component: 900 - total flux cleaned = -0.00404485 Jy ! Component: 950 - total flux cleaned = -0.00429777 Jy ! Component: 1000 - total flux cleaned = -0.00444119 Jy ! Component: 1050 - total flux cleaned = -0.00468964 Jy ! Component: 1100 - total flux cleaned = -0.00490109 Jy ! Component: 1150 - total flux cleaned = -0.00504019 Jy ! Component: 1200 - total flux cleaned = -0.00535223 Jy ! Component: 1250 - total flux cleaned = -0.00555792 Jy ! Component: 1300 - total flux cleaned = -0.00579653 Jy ! Component: 1350 - total flux cleaned = -0.00586365 Jy ! Component: 1400 - total flux cleaned = -0.00599815 Jy ! Component: 1450 - total flux cleaned = -0.00626422 Jy ! Component: 1500 - total flux cleaned = -0.00636316 Jy ! Component: 1550 - total flux cleaned = -0.00652702 Jy ! Component: 1600 - total flux cleaned = -0.00668989 Jy ! Component: 1650 - total flux cleaned = -0.00672206 Jy ! Component: 1700 - total flux cleaned = -0.00694683 Jy ! Component: 1750 - total flux cleaned = -0.00697888 Jy ! Component: 1800 - total flux cleaned = -0.00704241 Jy ! Component: 1850 - total flux cleaned = -0.00713731 Jy ! Component: 1900 - total flux cleaned = -0.0073876 Jy ! Component: 1950 - total flux cleaned = -0.00748099 Jy ! Component: 2000 - total flux cleaned = -0.00751175 Jy ! Component: 2050 - total flux cleaned = -0.00751164 Jy ! Component: 2100 - total flux cleaned = -0.00769455 Jy ! Component: 2150 - total flux cleaned = -0.00784612 Jy ! Component: 2200 - total flux cleaned = -0.00787645 Jy ! Component: 2250 - total flux cleaned = -0.00793621 Jy ! Component: 2300 - total flux cleaned = -0.00799591 Jy ! Component: 2350 - total flux cleaned = -0.00814439 Jy ! Component: 2400 - total flux cleaned = -0.00829197 Jy ! Component: 2450 - total flux cleaned = -0.00843859 Jy ! Component: 2500 - total flux cleaned = -0.00846798 Jy ! Component: 2550 - total flux cleaned = -0.00855485 Jy ! Component: 2600 - total flux cleaned = -0.00867033 Jy ! Component: 2650 - total flux cleaned = -0.00872774 Jy ! Component: 2700 - total flux cleaned = -0.00892767 Jy ! Component: 2750 - total flux cleaned = -0.00895588 Jy ! Component: 2800 - total flux cleaned = -0.00912505 Jy ! Component: 2850 - total flux cleaned = -0.00912496 Jy ! Component: 2900 - total flux cleaned = -0.00926478 Jy ! Component: 2950 - total flux cleaned = -0.00937584 Jy ! Component: 3000 - total flux cleaned = -0.00940348 Jy ! Component: 3050 - total flux cleaned = -0.00951364 Jy ! Component: 3100 - total flux cleaned = -0.00951367 Jy ! Component: 3150 - total flux cleaned = -0.00973195 Jy ! Component: 3200 - total flux cleaned = -0.00965063 Jy ! Component: 3250 - total flux cleaned = -0.00975874 Jy ! Component: 3300 - total flux cleaned = -0.00975858 Jy ! Component: 3350 - total flux cleaned = -0.00983868 Jy ! Component: 3400 - total flux cleaned = -0.00989177 Jy ! Component: 3450 - total flux cleaned = -0.00986547 Jy ! Component: 3500 - total flux cleaned = -0.0100759 Jy ! Component: 3550 - total flux cleaned = -0.0101021 Jy ! Component: 3600 - total flux cleaned = -0.0102326 Jy ! Component: 3650 - total flux cleaned = -0.0102328 Jy ! Component: 3700 - total flux cleaned = -0.0103102 Jy ! Component: 3750 - total flux cleaned = -0.0103617 Jy ! Component: 3800 - total flux cleaned = -0.0103362 Jy ! Component: 3850 - total flux cleaned = -0.0103616 Jy ! Component: 3900 - total flux cleaned = -0.0105139 Jy ! Component: 3950 - total flux cleaned = -0.0105898 Jy ! Component: 4000 - total flux cleaned = -0.0105644 Jy ! Component: 4050 - total flux cleaned = -0.0106645 Jy ! Total flux subtracted in 4096 components = -0.0106398 Jy ! Clean residual min=-0.001522 max=0.001584 Jy/beam ! Clean residual mean=-0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.74518 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 439 components and 0.74518 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0958+4725_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6334 x 1.133 at -45.59 degrees (North through East) ! Clean map min=-0.0020878 max=0.59628 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0958+4725_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.596282 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000405377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.203952 0.203952 0.407905 0.81581 1.63162 3.26324 6.52648 13.053 26.1059 52.2118 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.596 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1470.93 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0958+4725_X_uvs.log closed on Sat Dec 26 09:35:47 2015