! Started logfile: /scr/pima/gb073_uvs/J0953+3225_X_uvs.log on Sat Dec 26 09:35:30 2015 obs /scr/pima/gb073_uvs/J0953+3225_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0953+3225_X_uva.fits ! AN table 1: 29 integrations on 55 of 55 possible baselines. ! AN table 2: 29 integrations on 45 of 45 possible baselines. ! AN table 3: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.917955 visibilities/baseline/integration-bin. ! Found source: J0953+3225 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 30880 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0953+3225_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 29 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 29 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 29 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 29 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 58 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 58 telescope corrections were flagged in sub-array 1. ! A total of 58 telescope corrections were flagged in sub-array 2. ! A total of 58 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 29 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 29 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 29 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.042052Jy sigma=10.119522 ! Fit after self-cal, rms=0.727751Jy sigma=6.961401 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.4352 mas, bmaj=1.08 mas, bpa=-19.57 degrees ! Estimated noise=1.14358 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210542 Jy ! Component: 100 - total flux cleaned = 0.259394 Jy ! Total flux subtracted in 100 components = 0.259394 Jy ! Clean residual min=-0.013385 max=0.019090 Jy/beam ! Clean residual mean=-0.000004 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.259394 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.259394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.102256Jy sigma=0.809030 ! Fit after self-cal, rms=0.102264Jy sigma=0.808986 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206724 Jy ! Component: 100 - total flux cleaned = 0.0326343 Jy ! Total flux subtracted in 100 components = 0.0326343 Jy ! Clean residual min=-0.011588 max=0.012760 Jy/beam ! Clean residual mean=-0.000003 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.292028 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.292028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097034Jy sigma=0.737017 ! Fit after self-cal, rms=0.097066Jy sigma=0.736911 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Added new window around map position (4.2, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327896 Jy ! Component: 100 - total flux cleaned = 0.0042423 Jy ! Total flux subtracted in 100 components = 0.0042423 Jy ! Clean residual min=-0.009689 max=0.011286 Jy/beam ! Clean residual mean=-0.000003 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.296271 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.296271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096203Jy sigma=0.728659 ! Fit after self-cal, rms=0.096163Jy sigma=0.728185 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Added new window around map position (-2.8, -3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024816 Jy ! Component: 100 - total flux cleaned = 0.00358752 Jy ! Total flux subtracted in 100 components = 0.00358752 Jy ! Clean residual min=-0.008886 max=0.008910 Jy/beam ! Clean residual mean=-0.000003 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.299858 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.299858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095560Jy sigma=0.722895 ! Fit after self-cal, rms=0.095537Jy sigma=0.722593 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.6088 mas, bmaj=1.342 mas, bpa=-16.4 degrees ! Estimated noise=0.477644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574313 Jy ! Component: 100 - total flux cleaned = 0.00701953 Jy ! Component: 150 - total flux cleaned = 0.00752137 Jy ! Component: 200 - total flux cleaned = 0.00751875 Jy ! Total flux subtracted in 200 components = 0.00751875 Jy ! Clean residual min=-0.005111 max=0.003982 Jy/beam ! Clean residual mean=-0.000005 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.307377 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.307377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095050Jy sigma=0.717626 ! Fit after self-cal, rms=0.095035Jy sigma=0.717363 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6088 x 1.342 at -16.4 degrees (North through East) ! Clean map min=-0.0055297 max=0.27527 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 EF 1.00* FD 1.01 KP 1.00 ! LA 1.03 NL 0.95 ON 1.08 OV 0.99 ! PT 0.97 SC 0.99 ZC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 EF 1.00* FD 0.97 KP 1.01 ! LA 1.02 NL 0.93 ON 1.07 PT 0.96 ! SC 0.94 ZC 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 EF 1.00* FD 0.98 KP 1.00 ! LA 1.04 MK 0.98 NL 0.93 ON 0.98 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 EF 1.00* FD 1.05 KP 1.01 ! LA 1.06 NL 1.00 ON 1.06 OV 1.00 ! PT 1.05 SC 0.99 ZC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 EF 1.00* FD 1.03 KP 1.02 ! LA 1.05 NL 0.98 ON 1.02 PT 1.02 ! SC 0.98 ZC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 EF 1.00* FD 1.02 KP 1.01 ! LA 1.06 MK 1.01 NL 0.98 ON 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 EF 1.00* FD 1.03 KP 0.96 ! LA 0.99 NL 0.98 ON 1.05 OV 0.99 ! PT 1.03 SC 1.03 ZC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 EF 1.00* FD 1.00 KP 0.97 ! LA 0.99 NL 0.94 ON 1.04 PT 1.00 ! SC 1.03 ZC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 EF 1.00* FD 1.00 KP 0.95 ! LA 0.99 MK 0.98 NL 0.95 ON 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 EF 1.00* FD 1.04 KP 0.98 ! LA 1.01 NL 1.01 ON 1.07 OV 0.97 ! PT 1.04 SC 1.00 ZC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 EF 1.00* FD 1.00 KP 1.00 ! LA 0.99 NL 0.97 ON 1.06 PT 1.04 ! SC 1.04 ZC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 EF 1.00* FD 1.00 KP 1.00 ! LA 1.00 MK 0.98 NL 0.96 ON 1.02 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.05 KP 0.92 ! LA 1.01 NL 1.01 ON 1.27 OV 1.05 ! PT 1.01 SC 1.03 ZC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 0.99 KP 0.91 ! LA 1.02 NL 1.00 ON 1.19 PT 1.00 ! SC 1.03 ZC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.01 KP 0.91 ! LA 1.00 MK 0.99 NL 1.00 ON 1.26 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.02 KP 0.87 ! LA 1.02 NL 1.04 ON 1.31 OV 1.04 ! PT 0.95 SC 0.95 ZC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.01 KP 0.88 ! LA 1.01 NL 0.98 ON 1.32 PT 0.99 ! SC 1.00 ZC 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.03 KP 0.89 ! LA 0.97 MK 0.99 NL 0.99 ON 1.26 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 EF 1.00* FD 1.09 KP 0.93 ! LA 1.06 NL 1.05 ON 1.37 OV 0.99 ! PT 1.03 SC 0.99 ZC 0.73 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 EF 1.00* FD 1.05 KP 0.93 ! LA 1.06 NL 1.02 ON 1.33 PT 1.02 ! SC 1.05 ZC 0.71 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 EF 1.00* FD 1.05 KP 0.91 ! LA 1.04 MK 1.05 NL 1.01 ON 1.29 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 EF 1.00* FD 1.05 KP 0.92 ! LA 1.05 NL 1.04 ON 1.34 OV 1.01 ! PT 1.04 SC 1.02 ZC 0.68 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 EF 1.00* FD 1.02 KP 0.92 ! LA 1.06 NL 0.99 ON 1.29 PT 1.04 ! SC 1.02 ZC 0.66 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 EF 1.00* FD 1.05 KP 0.93 ! LA 1.05 MK 1.05 NL 0.99 ON 1.34 ! PT 1.03 SC 1.01 ! ! ! Fit before self-cal, rms=0.095035Jy sigma=0.717363 ! Fit after self-cal, rms=0.091469Jy sigma=0.671100 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.6051 mas, bmaj=1.354 mas, bpa=-16.08 degrees ! Estimated noise=0.477822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000728189 Jy ! Component: 100 - total flux cleaned = -0.000736137 Jy ! Component: 150 - total flux cleaned = -0.000588269 Jy ! Component: 200 - total flux cleaned = -0.00046078 Jy ! Total flux subtracted in 200 components = -0.00046078 Jy ! Clean residual min=-0.001886 max=0.002052 Jy/beam ! Clean residual mean=-0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.306916 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.306916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091268Jy sigma=0.669409 ! Fit after self-cal, rms=0.091312Jy sigma=0.669193 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Added new window around map position (-5.6, 13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859535 Jy ! Component: 100 - total flux cleaned = 0.000630414 Jy ! Component: 150 - total flux cleaned = 0.000525523 Jy ! Component: 200 - total flux cleaned = 0.000476549 Jy ! Total flux subtracted in 200 components = 0.000476549 Jy ! Clean residual min=-0.001600 max=0.001441 Jy/beam ! Clean residual mean=-0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.307393 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.307393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091228Jy sigma=0.668456 ! Fit after self-cal, rms=0.091225Jy sigma=0.668426 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091225Jy sigma=0.668426 ! Fit after self-cal, rms=0.091443Jy sigma=0.668073 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.604 mas, bmaj=1.354 mas, bpa=-16.07 degrees ! Estimated noise=0.477668 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326135 Jy ! Component: 100 - total flux cleaned = 0.000442948 Jy ! Component: 150 - total flux cleaned = 0.000539123 Jy ! Component: 200 - total flux cleaned = 0.000580935 Jy ! Total flux subtracted in 200 components = 0.000580935 Jy ! Clean residual min=-0.001508 max=0.001446 Jy/beam ! Clean residual mean=-0.000001 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.307974 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.307974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091367Jy sigma=0.667434 ! Fit after self-cal, rms=0.091364Jy sigma=0.667416 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105198 Jy ! Component: 100 - total flux cleaned = 0.000215518 Jy ! Component: 150 - total flux cleaned = 0.000284157 Jy ! Component: 200 - total flux cleaned = 0.000316525 Jy ! Total flux subtracted in 200 components = 0.000316525 Jy ! Clean residual min=-0.001479 max=0.001359 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.30829 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 61 components and 0.30829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091329Jy sigma=0.667156 ! Fit after self-cal, rms=0.091327Jy sigma=0.667150 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091327Jy sigma=0.667150 ! Fit after self-cal, rms=0.091503Jy sigma=0.667031 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.6033 mas, bmaj=1.355 mas, bpa=-16.06 degrees ! Estimated noise=0.477674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264153 Jy ! Component: 100 - total flux cleaned = 0.000301675 Jy ! Component: 150 - total flux cleaned = 0.000401275 Jy ! Component: 200 - total flux cleaned = 0.000491982 Jy ! Total flux subtracted in 200 components = 0.000491982 Jy ! Clean residual min=-0.001446 max=0.001333 Jy/beam ! Clean residual mean=-0.000001 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.308782 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.308782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091467Jy sigma=0.666738 ! Fit after self-cal, rms=0.091466Jy sigma=0.666735 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.32289e-05 Jy ! Component: 100 - total flux cleaned = 6.13847e-05 Jy ! Component: 150 - total flux cleaned = 8.73852e-05 Jy ! Component: 200 - total flux cleaned = 0.000112358 Jy ! Total flux subtracted in 200 components = 0.000112358 Jy ! Clean residual min=-0.001436 max=0.001328 Jy/beam ! Clean residual mean=-0.000001 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.308894 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 71 components and 0.308894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091445Jy sigma=0.666587 ! Fit after self-cal, rms=0.091443Jy sigma=0.666585 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091443Jy sigma=0.666585 ! Fit after self-cal, rms=0.091548Jy sigma=0.666535 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=2.689 mas, bmaj=2.95 mas, bpa=-6.398 degrees ! Estimated noise=0.608995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013804 Jy ! Component: 100 - total flux cleaned = 0.000137568 Jy ! Component: 150 - total flux cleaned = 0.000123035 Jy ! Component: 200 - total flux cleaned = 8.41205e-05 Jy ! Total flux subtracted in 200 components = 8.41205e-05 Jy ! Clean residual min=-0.001649 max=0.001475 Jy/beam ! Clean residual mean=-0.000003 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.308979 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.308978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091546Jy sigma=0.666529 ! Fit after self-cal, rms=0.091545Jy sigma=0.666517 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.72166e-05 Jy ! Component: 100 - total flux cleaned = -3.87811e-05 Jy ! Component: 150 - total flux cleaned = -8.45939e-05 Jy ! Component: 200 - total flux cleaned = -0.000126236 Jy ! Total flux subtracted in 200 components = -0.000126236 Jy ! Clean residual min=-0.001615 max=0.001471 Jy/beam ! Clean residual mean=-0.000003 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.308852 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 86 components and 0.308852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091545Jy sigma=0.666526 ! Fit after self-cal, rms=0.091544Jy sigma=0.666516 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.6027 mas, bmaj=1.355 mas, bpa=-16.05 degrees ! Estimated noise=0.477821 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6027 x 1.355 at -16.05 degrees (North through East) ! Clean map min=-0.00129 max=0.27496 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.4286 mas, bmaj=1.094 mas, bpa=-19.09 degrees ! Estimated noise=1.14172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210065 Jy ! Component: 100 - total flux cleaned = 0.257886 Jy ! Component: 150 - total flux cleaned = 0.276842 Jy ! Component: 200 - total flux cleaned = 0.286863 Jy ! Total flux subtracted in 200 components = 0.286863 Jy ! Clean residual min=-0.004008 max=0.005559 Jy/beam ! Clean residual mean=-0.000002 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.286863 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.286863 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.6027 mas, bmaj=1.355 mas, bpa=-16.05 degrees ! Estimated noise=0.477821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941091 Jy ! Component: 100 - total flux cleaned = 0.014171 Jy ! Component: 150 - total flux cleaned = 0.0172189 Jy ! Component: 200 - total flux cleaned = 0.0192509 Jy ! Total flux subtracted in 200 components = 0.0192509 Jy ! Clean residual min=-0.001627 max=0.002065 Jy/beam ! Clean residual mean=-0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.306114 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.306114 Jy ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Added new window around map position (0.6, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162082 Jy ! Component: 100 - total flux cleaned = 0.00199196 Jy ! Component: 150 - total flux cleaned = 0.00227441 Jy ! Component: 200 - total flux cleaned = 0.00244459 Jy ! Total flux subtracted in 200 components = 0.00244459 Jy ! Clean residual min=-0.001489 max=0.001412 Jy/beam ! Clean residual mean=-0.000002 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.308559 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.308559 Jy ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=2.689 mas, bmaj=2.95 mas, bpa=-6.398 degrees ! Estimated noise=0.608995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701906 Jy ! Component: 100 - total flux cleaned = 0.000750866 Jy ! Component: 150 - total flux cleaned = 0.000791463 Jy ! Component: 200 - total flux cleaned = 0.000825217 Jy ! Total flux subtracted in 200 components = 0.000825217 Jy ! Clean residual min=-0.001674 max=0.001435 Jy/beam ! Clean residual mean=-0.000003 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.309384 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39547e-05 Jy ! Component: 100 - total flux cleaned = -2.22112e-05 Jy ! Component: 150 - total flux cleaned = -4.43314e-05 Jy ! Component: 200 - total flux cleaned = -6.44036e-05 Jy ! Total flux subtracted in 200 components = -6.44036e-05 Jy ! Clean residual min=-0.001656 max=0.001433 Jy/beam ! Clean residual mean=-0.000003 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.30932 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.30932 Jy ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! Estimated beam: bmin=0.6027 mas, bmaj=1.355 mas, bpa=-16.05 degrees ! Estimated noise=0.477821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155636 Jy ! Component: 100 - total flux cleaned = 0.000121561 Jy ! Component: 150 - total flux cleaned = 9.01058e-05 Jy ! Component: 200 - total flux cleaned = 3.27119e-05 Jy ! Total flux subtracted in 200 components = 3.27119e-05 Jy ! Clean residual min=-0.001436 max=0.001327 Jy/beam ! Clean residual mean=-0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.309352 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 0.309352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.091536Jy sigma=0.666397 ! Fit after self-cal, rms=0.091512Jy sigma=0.666290 wmodel /scr/pima/gb073_uvs/J0953+3225_X_map.mod ! Writing 82 model components to file: /scr/pima/gb073_uvs/J0953+3225_X_map.mod wobs /scr/pima/gb073_uvs/J0953+3225_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0953+3225_X_uvs.fits wwins /scr/pima/gb073_uvs/J0953+3225_X_map.win ! wwins: Wrote 6 windows to /scr/pima/gb073_uvs/J0953+3225_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360654 Jy ! Component: 100 - total flux cleaned = -0.000648183 Jy ! Component: 150 - total flux cleaned = -0.00076316 Jy ! Component: 200 - total flux cleaned = -0.000875078 Jy ! Component: 250 - total flux cleaned = -0.000897062 Jy ! Component: 300 - total flux cleaned = -0.000939699 Jy ! Component: 350 - total flux cleaned = -0.00100253 Jy ! Component: 400 - total flux cleaned = -0.00102306 Jy ! Component: 450 - total flux cleaned = -0.00104365 Jy ! Component: 500 - total flux cleaned = -0.00108355 Jy ! Component: 550 - total flux cleaned = -0.00110322 Jy ! Component: 600 - total flux cleaned = -0.00106419 Jy ! Component: 650 - total flux cleaned = -0.00108349 Jy ! Component: 700 - total flux cleaned = -0.00117922 Jy ! Component: 750 - total flux cleaned = -0.001141 Jy ! Component: 800 - total flux cleaned = -0.00123486 Jy ! Component: 850 - total flux cleaned = -0.00123487 Jy ! Component: 900 - total flux cleaned = -0.00130898 Jy ! Component: 950 - total flux cleaned = -0.00138226 Jy ! Component: 1000 - total flux cleaned = -0.00141825 Jy ! Component: 1050 - total flux cleaned = -0.00138238 Jy ! Component: 1100 - total flux cleaned = -0.00145366 Jy ! Component: 1150 - total flux cleaned = -0.00138301 Jy ! Component: 1200 - total flux cleaned = -0.00136546 Jy ! Component: 1250 - total flux cleaned = -0.00138315 Jy ! Component: 1300 - total flux cleaned = -0.00141763 Jy ! Component: 1350 - total flux cleaned = -0.00133201 Jy ! Component: 1400 - total flux cleaned = -0.00140011 Jy ! Component: 1450 - total flux cleaned = -0.00136621 Jy ! Component: 1500 - total flux cleaned = -0.00133256 Jy ! Component: 1550 - total flux cleaned = -0.0012826 Jy ! Component: 1600 - total flux cleaned = -0.00128268 Jy ! Component: 1650 - total flux cleaned = -0.00133203 Jy ! Component: 1700 - total flux cleaned = -0.00136481 Jy ! Component: 1750 - total flux cleaned = -0.00138096 Jy ! Component: 1800 - total flux cleaned = -0.00144578 Jy ! Component: 1850 - total flux cleaned = -0.00139748 Jy ! Component: 1900 - total flux cleaned = -0.00149349 Jy ! Component: 1950 - total flux cleaned = -0.00150946 Jy ! Component: 2000 - total flux cleaned = -0.00146194 Jy ! Component: 2050 - total flux cleaned = -0.00146206 Jy ! Component: 2100 - total flux cleaned = -0.00161863 Jy ! Component: 2150 - total flux cleaned = -0.00152509 Jy ! Component: 2200 - total flux cleaned = -0.00158707 Jy ! Component: 2250 - total flux cleaned = -0.00155626 Jy ! Component: 2300 - total flux cleaned = -0.00163306 Jy ! Component: 2350 - total flux cleaned = -0.00161767 Jy ! Component: 2400 - total flux cleaned = -0.00163301 Jy ! Component: 2450 - total flux cleaned = -0.00167838 Jy ! Component: 2500 - total flux cleaned = -0.00166334 Jy ! Component: 2550 - total flux cleaned = -0.00161832 Jy ! Component: 2600 - total flux cleaned = -0.00166308 Jy ! Component: 2650 - total flux cleaned = -0.00163341 Jy ! Component: 2700 - total flux cleaned = -0.00158916 Jy ! Component: 2750 - total flux cleaned = -0.00161852 Jy ! Component: 2800 - total flux cleaned = -0.00167712 Jy ! Component: 2850 - total flux cleaned = -0.00164791 Jy ! Component: 2900 - total flux cleaned = -0.00163332 Jy ! Component: 2950 - total flux cleaned = -0.00161892 Jy ! Component: 3000 - total flux cleaned = -0.00170525 Jy ! Component: 3050 - total flux cleaned = -0.00160501 Jy ! Component: 3100 - total flux cleaned = -0.00161934 Jy ! Component: 3150 - total flux cleaned = -0.00163359 Jy ! Component: 3200 - total flux cleaned = -0.00157698 Jy ! Component: 3250 - total flux cleaned = -0.001577 Jy ! Component: 3300 - total flux cleaned = -0.00161912 Jy ! Component: 3350 - total flux cleaned = -0.00163304 Jy ! Component: 3400 - total flux cleaned = -0.00161916 Jy ! Component: 3450 - total flux cleaned = -0.00160524 Jy ! Component: 3500 - total flux cleaned = -0.00161904 Jy ! Component: 3550 - total flux cleaned = -0.00160524 Jy ! Component: 3600 - total flux cleaned = -0.00155031 Jy ! Component: 3650 - total flux cleaned = -0.00150922 Jy ! Component: 3700 - total flux cleaned = -0.00156378 Jy ! Component: 3750 - total flux cleaned = -0.00153662 Jy ! Component: 3800 - total flux cleaned = -0.00155023 Jy ! Component: 3850 - total flux cleaned = -0.00153683 Jy ! Component: 3900 - total flux cleaned = -0.00152329 Jy ! Component: 3950 - total flux cleaned = -0.00153664 Jy ! Component: 4000 - total flux cleaned = -0.00156333 Jy ! Component: 4050 - total flux cleaned = -0.00153664 Jy ! Total flux subtracted in 4096 components = -0.00151007 Jy ! Clean residual min=-0.000738 max=0.000739 Jy/beam ! Clean residual mean=-0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.307842 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 386 components and 0.307842 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0953+3225_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6027 x 1.355 at -16.05 degrees (North through East) ! Clean map min=-0.00096483 max=0.27782 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0953+3225_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.277817 invert ! Inverting map ! Your choice of large map pixels excluded 2.34% of the data. ! The x-axis pixel size should ideally be below 0.1895 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216269 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.233538 0.233538 0.467076 0.934151 1.8683 3.7366 7.47321 14.9464 29.8928 59.7857 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.277 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1284.59 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0953+3225_X_uvs.log closed on Sat Dec 26 09:35:36 2015