! Started logfile: /scr/pima/gb073_uvs/J0842+4525_X_uvs.log on Sat Dec 26 09:34:51 2015 obs /scr/pima/gb073_uvs/J0842+4525_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0842+4525_X_uva.fits ! AN table 1: 25 integrations on 66 of 66 possible baselines. ! AN table 2: 85 integrations on 55 of 55 possible baselines. ! AN table 3: 28 integrations on 66 of 66 possible baselines. ! AN table 4: 29 integrations on 15 of 15 possible baselines. ! AN table 5: 23 integrations on 66 of 66 possible baselines. ! Apparent sampling: 0.893541 visibilities/baseline/integration-bin. ! Found source: J0842+4525 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 72384 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0842+4525_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 103 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 103 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 103 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 103 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 65 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! A total of 58 telescope corrections were flagged in sub-array 4. ! A total of 46 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 65 telescope corrections were flagged in sub-array 1. ! A total of 188 telescope corrections were flagged in sub-array 2. ! A total of 62 telescope corrections were flagged in sub-array 3. ! A total of 58 telescope corrections were flagged in sub-array 4. ! A total of 46 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 103 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 41 telescope corrections were flagged in sub-array 1. ! A total of 103 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.010122Jy sigma=8.847216 ! Fit after self-cal, rms=0.904386Jy sigma=7.895150 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.473 mas, bmaj=0.7601 mas, bpa=-0.3544 degrees ! Estimated noise=0.727542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0749805 Jy ! Component: 100 - total flux cleaned = 0.0928827 Jy ! Total flux subtracted in 100 components = 0.0928827 Jy ! Clean residual min=-0.003953 max=0.007245 Jy/beam ! Clean residual mean=-0.000001 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.0928827 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0928827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.094462Jy sigma=0.691918 ! Fit after self-cal, rms=0.094250Jy sigma=0.690687 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783869 Jy ! Component: 100 - total flux cleaned = 0.0117943 Jy ! Total flux subtracted in 100 components = 0.0117943 Jy ! Clean residual min=-0.004081 max=0.004310 Jy/beam ! Clean residual mean=-0.000001 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.104677 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.104677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093411Jy sigma=0.680290 ! Fit after self-cal, rms=0.093403Jy sigma=0.680183 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Added new window around map position (1.4, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.38591e-05 Jy ! Component: 100 - total flux cleaned = 0.000544503 Jy ! Total flux subtracted in 100 components = 0.000544503 Jy ! Clean residual min=-0.003813 max=0.003695 Jy/beam ! Clean residual mean=-0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.105222 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.105222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.093222Jy sigma=0.678508 ! Fit after self-cal, rms=0.093210Jy sigma=0.678389 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.6117 mas, bmaj=0.9813 mas, bpa=4.185 degrees ! Estimated noise=0.344231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520014 Jy ! Component: 100 - total flux cleaned = 0.008169 Jy ! Component: 150 - total flux cleaned = 0.00903703 Jy ! Component: 200 - total flux cleaned = 0.00954335 Jy ! Total flux subtracted in 200 components = 0.00954335 Jy ! Clean residual min=-0.002047 max=0.002160 Jy/beam ! Clean residual mean=0.000002 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.114765 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.114765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092888Jy sigma=0.674651 ! Fit after self-cal, rms=0.092848Jy sigma=0.674340 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135567 Jy ! Component: 100 - total flux cleaned = 0.0016499 Jy ! Component: 150 - total flux cleaned = 0.00180585 Jy ! Component: 200 - total flux cleaned = 0.00189928 Jy ! Total flux subtracted in 200 components = 0.00189928 Jy ! Clean residual min=-0.002140 max=0.001661 Jy/beam ! Clean residual mean=0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.116664 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.116664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.092764Jy sigma=0.673550 ! Fit after self-cal, rms=0.092759Jy sigma=0.673503 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6117 x 0.9813 at 4.185 degrees (North through East) ! Clean map min=-0.0032099 max=0.098487 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 EF 1.00* FD 0.95 KP 1.01 ! LA 0.98 MC 1.01 MK 0.99 NL 0.98 ! OV 1.04 PT 0.96 SC 1.00 ZC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 EF 1.00* FD 1.00 KP 1.05 ! LA 1.05 MC 0.99 NL 0.89 ON 0.96 ! PT 1.02 SC 1.02 ZC 0.79 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 EF 1.00* FD 1.00 KP 0.94 ! LA 1.00 MC 1.14 MK 1.03 NL 0.94 ! ON 0.92 OV 1.00 PT 0.99 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.90 EF 1.00* MC 0.92 NL 1.02 ! ON 0.90 SC 0.85 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 EF 1.00* FD 1.04 KP 1.05 ! LA 1.04 MC 0.96 NL 0.87 ON 1.05 ! OV 1.06 PT 1.02 SC 0.91 ZC 0.78 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 EF 1.00* FD 1.03 KP 0.97 ! LA 1.08 MC 1.05 MK 0.99 NL 1.00 ! OV 1.03 PT 0.98 SC 1.02 ZC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 EF 1.00* FD 1.05 KP 1.06 ! LA 1.09 MC 0.95 NL 0.94 ON 0.99 ! PT 1.02 SC 1.00 ZC 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 EF 1.00* FD 1.01 KP 0.99 ! LA 1.11 MC 0.94 MK 1.07 NL 1.05 ! ON 0.94 OV 1.04 PT 0.97 SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 EF 1.00* MC 1.00 NL 0.98 ! ON 0.88 SC 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 EF 1.00* FD 1.02 KP 1.09 ! LA 1.09 MC 0.98 NL 0.98 ON 1.11 ! OV 1.04 PT 1.00 SC 1.02 ZC 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 EF 1.00* FD 0.97 KP 0.95 ! LA 0.92 MC 1.11 MK 1.03 NL 0.91 ! OV 0.98 PT 1.00 SC 1.01 ZC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 EF 1.00* FD 1.01 KP 0.99 ! LA 1.03 MC 0.99 NL 0.93 ON 0.96 ! PT 0.98 SC 1.01 ZC 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 EF 1.00* FD 1.01 KP 0.95 ! LA 1.01 MC 0.95 MK 1.03 NL 0.93 ! ON 0.98 OV 0.99 PT 1.02 SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 EF 1.00* MC 0.88 NL 0.96 ! ON 1.05 SC 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 EF 1.00* FD 1.02 KP 0.92 ! LA 1.01 MC 1.02 NL 0.88 ON 0.94 ! OV 1.06 PT 1.02 SC 1.04 ZC 0.74 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 EF 1.00* FD 1.04 KP 0.98 ! LA 0.97 MC 1.00 MK 1.04 NL 0.98 ! OV 0.96 PT 0.99 SC 1.04 ZC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 EF 1.00* FD 1.00 KP 1.04 ! LA 1.05 MC 0.98 NL 0.96 ON 0.90 ! PT 1.03 SC 0.98 ZC 0.84 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 EF 1.00* FD 0.98 KP 0.96 ! LA 0.97 MC 0.92 MK 1.00 NL 1.01 ! ON 1.06 OV 1.00 PT 1.02 SC 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.90 EF 1.00* MC 1.00 NL 1.03 ! ON 0.97 SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 EF 1.00* FD 1.01 KP 0.99 ! LA 1.04 MC 1.01 NL 0.92 ON 1.03 ! OV 1.02 PT 1.09 SC 1.05 ZC 0.79 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.01 KP 0.87 ! LA 0.92 MC 1.49 MK 1.03 NL 1.01 ! OV 1.02 PT 0.95 SC 0.96 ZC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.01 KP 0.93 ! LA 1.02 MC 1.30 NL 0.97 ON 1.17 ! PT 0.99 SC 1.03 ZC 0.81 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.09 KP 0.89 ! LA 0.98 MC 1.14 MK 0.97 NL 1.03 ! ON 1.50 OV 1.04 PT 0.97 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* MC 1.22 NL 0.89 ! ON 1.20 SC 1.01 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.07 KP 0.89 ! LA 1.08 MC 1.25 NL 0.93 ON 1.17 ! OV 1.01 PT 0.98 SC 0.99 ZC 0.83 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.01 KP 0.87 ! LA 1.00 MC 1.63 MK 0.99 NL 1.05 ! OV 1.02 PT 0.92 SC 0.89 ZC 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00 KP 0.92 ! LA 1.04 MC 1.23 NL 1.00 ON 1.20 ! PT 0.95 SC 0.95 ZC 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 0.97 KP 0.87 ! LA 0.97 MC 1.10 MK 1.05 NL 0.99 ! ON 1.22 OV 1.07 PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* MC 0.99 NL 1.03 ! ON 1.11 SC 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 0.98 KP 0.87 ! LA 1.02 MC 1.25 NL 0.98 ON 1.13 ! OV 1.16 PT 1.01 SC 1.04 ZC 0.83 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 EF 1.00* FD 1.05 KP 0.90 ! LA 1.05 MC 1.46 MK 1.12 NL 1.02 ! OV 1.01 PT 0.97 SC 1.01 ZC 0.66 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 EF 1.00* FD 1.07 KP 0.96 ! LA 1.09 MC 1.35 NL 1.01 ON 1.21 ! PT 0.99 SC 1.00 ZC 0.69 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 EF 1.00* FD 1.03 KP 0.91 ! LA 1.01 MC 1.21 MK 1.10 NL 1.05 ! ON 1.54 OV 1.06 PT 1.04 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 EF 1.00* MC 1.06 NL 1.04 ! ON 1.13 SC 1.02 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 EF 1.00* FD 1.06 KP 0.96 ! LA 1.05 MC 1.38 NL 0.96 ON 1.30 ! OV 1.05 PT 0.97 SC 1.11 ZC 0.64 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 EF 1.00* FD 1.06 KP 0.97 ! LA 0.94 MC 1.65 MK 1.05 NL 0.99 ! OV 0.96 PT 0.97 SC 0.97 ZC 0.71 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 EF 1.00* FD 1.02 KP 0.93 ! LA 1.05 MC 1.36 NL 1.00 ON 1.21 ! PT 1.00 SC 0.96 ZC 0.65 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 EF 1.00* FD 0.98 KP 0.89 ! LA 1.00 MC 1.29 MK 1.03 NL 1.00 ! ON 1.25 OV 1.01 PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 EF 1.00* MC 1.06 NL 1.02 ! ON 1.13 SC 1.02 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 EF 1.00* FD 1.04 KP 0.95 ! LA 1.05 MC 1.33 NL 1.07 ON 1.38 ! OV 1.05 PT 1.08 SC 1.05 ZC 0.64 ! ! ! Fit before self-cal, rms=0.092759Jy sigma=0.673503 ! Fit after self-cal, rms=0.094564Jy sigma=0.662908 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.6055 mas, bmaj=0.9912 mas, bpa=4.26 degrees ! Estimated noise=0.344333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143104 Jy ! Component: 100 - total flux cleaned = 0.00162552 Jy ! Component: 150 - total flux cleaned = 0.00179008 Jy ! Component: 200 - total flux cleaned = 0.00190712 Jy ! Total flux subtracted in 200 components = 0.00190712 Jy ! Clean residual min=-0.001006 max=0.001048 Jy/beam ! Clean residual mean=0.000009 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.118571 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.118571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.094533Jy sigma=0.662603 ! Fit after self-cal, rms=0.094682Jy sigma=0.662199 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.094682Jy sigma=0.662199 ! Fit after self-cal, rms=0.095309Jy sigma=0.661366 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.6051 mas, bmaj=0.9911 mas, bpa=4.111 degrees ! Estimated noise=0.345098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887909 Jy ! Component: 100 - total flux cleaned = 0.00104145 Jy ! Component: 150 - total flux cleaned = 0.00110857 Jy ! Component: 200 - total flux cleaned = 0.00114912 Jy ! Total flux subtracted in 200 components = 0.00114912 Jy ! Clean residual min=-0.001020 max=0.000980 Jy/beam ! Clean residual mean=0.000004 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.11972 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 59 components and 0.11972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095296Jy sigma=0.661249 ! Fit after self-cal, rms=0.095312Jy sigma=0.661213 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028411 Jy ! Component: 100 - total flux cleaned = 0.000304536 Jy ! Component: 150 - total flux cleaned = 0.000323256 Jy ! Component: 200 - total flux cleaned = 0.000340707 Jy ! Total flux subtracted in 200 components = 0.000340707 Jy ! Clean residual min=-0.001003 max=0.000972 Jy/beam ! Clean residual mean=0.000004 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.120061 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.120061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095304Jy sigma=0.661150 ! Fit after self-cal, rms=0.095302Jy sigma=0.661144 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095302Jy sigma=0.661144 ! Fit after self-cal, rms=0.095567Jy sigma=0.661128 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.6047 mas, bmaj=0.9906 mas, bpa=4.093 degrees ! Estimated noise=0.345432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390261 Jy ! Component: 100 - total flux cleaned = 0.000427104 Jy ! Component: 150 - total flux cleaned = 0.000444238 Jy ! Component: 200 - total flux cleaned = 0.000460574 Jy ! Total flux subtracted in 200 components = 0.000460574 Jy ! Clean residual min=-0.001002 max=0.000970 Jy/beam ! Clean residual mean=0.000004 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.120522 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.120522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095559Jy sigma=0.661072 ! Fit after self-cal, rms=0.095563Jy sigma=0.661067 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128686 Jy ! Component: 100 - total flux cleaned = 0.000144934 Jy ! Component: 150 - total flux cleaned = 0.000160347 Jy ! Component: 200 - total flux cleaned = 0.000175212 Jy ! Total flux subtracted in 200 components = 0.000175212 Jy ! Clean residual min=-0.000994 max=0.000968 Jy/beam ! Clean residual mean=0.000004 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.120697 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 70 components and 0.120697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095558Jy sigma=0.661025 ! Fit after self-cal, rms=0.095556Jy sigma=0.661022 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095556Jy sigma=0.661022 ! Fit after self-cal, rms=0.095772Jy sigma=0.661017 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=2.743 mas, bmaj=2.957 mas, bpa=-42.33 degrees ! Estimated noise=0.476979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441535 Jy ! Component: 100 - total flux cleaned = 0.00057037 Jy ! Component: 150 - total flux cleaned = 0.000603213 Jy ! Component: 200 - total flux cleaned = 0.000614194 Jy ! Total flux subtracted in 200 components = 0.000614194 Jy ! Clean residual min=-0.001045 max=0.000946 Jy/beam ! Clean residual mean=0.000012 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.121311 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.121311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095772Jy sigma=0.661006 ! Fit after self-cal, rms=0.095774Jy sigma=0.661004 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.25925e-05 Jy ! Component: 100 - total flux cleaned = 9.42541e-05 Jy ! Component: 150 - total flux cleaned = 0.000111936 Jy ! Component: 200 - total flux cleaned = 0.000116915 Jy ! Total flux subtracted in 200 components = 0.000116915 Jy ! Clean residual min=-0.001044 max=0.000950 Jy/beam ! Clean residual mean=0.000012 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.121428 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.121428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095775Jy sigma=0.660997 ! Fit after self-cal, rms=0.095775Jy sigma=0.660995 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.6044 mas, bmaj=0.9899 mas, bpa=4.063 degrees ! Estimated noise=0.345799 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6044 x 0.9899 at 4.063 degrees (North through East) ! Clean map min=-0.0020628 max=0.098365 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.4658 mas, bmaj=0.7659 mas, bpa=-0.5221 degrees ! Estimated noise=0.728357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0749395 Jy ! Component: 100 - total flux cleaned = 0.0928467 Jy ! Component: 150 - total flux cleaned = 0.100654 Jy ! Component: 200 - total flux cleaned = 0.10527 Jy ! Total flux subtracted in 200 components = 0.10527 Jy ! Clean residual min=-0.002332 max=0.002517 Jy/beam ! Clean residual mean=-0.000001 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.10527 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.10527 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.6044 mas, bmaj=0.9899 mas, bpa=4.063 degrees ! Estimated noise=0.345799 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538544 Jy ! Component: 100 - total flux cleaned = 0.00852978 Jy ! Component: 150 - total flux cleaned = 0.010638 Jy ! Component: 200 - total flux cleaned = 0.0120648 Jy ! Total flux subtracted in 200 components = 0.0120648 Jy ! Clean residual min=-0.000935 max=0.001098 Jy/beam ! Clean residual mean=0.000006 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.117335 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.117335 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Added new window around map position (-1.2, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668485 Jy ! Component: 100 - total flux cleaned = 0.00120245 Jy ! Component: 150 - total flux cleaned = 0.00165872 Jy ! Component: 200 - total flux cleaned = 0.0020492 Jy ! Total flux subtracted in 200 components = 0.0020492 Jy ! Clean residual min=-0.000933 max=0.000971 Jy/beam ! Clean residual mean=0.000005 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.119384 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 0.119384 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Added new window around map position (-18.4, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751996 Jy ! Component: 100 - total flux cleaned = 0.00101481 Jy ! Component: 150 - total flux cleaned = 0.00123104 Jy ! Component: 200 - total flux cleaned = 0.00138739 Jy ! Total flux subtracted in 200 components = 0.00138739 Jy ! Clean residual min=-0.000931 max=0.000943 Jy/beam ! Clean residual mean=0.000003 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.120772 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.120772 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Added new window around map position (-4.2, -51.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695491 Jy ! Component: 100 - total flux cleaned = 0.000860042 Jy ! Component: 150 - total flux cleaned = 0.000957109 Jy ! Component: 200 - total flux cleaned = 0.0010312 Jy ! Total flux subtracted in 200 components = 0.0010312 Jy ! Clean residual min=-0.000924 max=0.000915 Jy/beam ! Clean residual mean=0.000003 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.121803 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.121803 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=2.743 mas, bmaj=2.957 mas, bpa=-42.33 degrees ! Estimated noise=0.476979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613696 Jy ! Component: 100 - total flux cleaned = 0.000978783 Jy ! Component: 150 - total flux cleaned = 0.00110871 Jy ! Component: 200 - total flux cleaned = 0.00116998 Jy ! Total flux subtracted in 200 components = 0.00116998 Jy ! Clean residual min=-0.000948 max=0.000960 Jy/beam ! Clean residual mean=0.000007 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.122973 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.23471e-05 Jy ! Component: 100 - total flux cleaned = 4.93635e-05 Jy ! Component: 150 - total flux cleaned = 6.21398e-05 Jy ! Component: 200 - total flux cleaned = 7.40687e-05 Jy ! Total flux subtracted in 200 components = 7.40687e-05 Jy ! Clean residual min=-0.000956 max=0.000964 Jy/beam ! Clean residual mean=0.000007 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.123047 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.123047 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! Estimated beam: bmin=0.6044 mas, bmaj=0.9899 mas, bpa=4.063 degrees ! Estimated noise=0.345799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319124 Jy ! Component: 100 - total flux cleaned = -0.000372793 Jy ! Component: 150 - total flux cleaned = -0.000389246 Jy ! Component: 200 - total flux cleaned = -0.000404826 Jy ! Total flux subtracted in 200 components = -0.000404826 Jy ! Clean residual min=-0.000925 max=0.000906 Jy/beam ! Clean residual mean=0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.122642 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 90 components and 0.122642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095748Jy sigma=0.660859 ! Fit after self-cal, rms=0.095731Jy sigma=0.660802 wmodel /scr/pima/gb073_uvs/J0842+4525_X_map.mod ! Writing 90 model components to file: /scr/pima/gb073_uvs/J0842+4525_X_map.mod wobs /scr/pima/gb073_uvs/J0842+4525_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0842+4525_X_uvs.fits wwins /scr/pima/gb073_uvs/J0842+4525_X_map.win ! wwins: Wrote 7 windows to /scr/pima/gb073_uvs/J0842+4525_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.034e-05 Jy ! Component: 100 - total flux cleaned = 0.000145455 Jy ! Component: 150 - total flux cleaned = 0.000224275 Jy ! Component: 200 - total flux cleaned = 0.000255194 Jy ! Component: 250 - total flux cleaned = 0.00033112 Jy ! Component: 300 - total flux cleaned = 0.00036085 Jy ! Component: 350 - total flux cleaned = 0.000375648 Jy ! Component: 400 - total flux cleaned = 0.00044856 Jy ! Component: 450 - total flux cleaned = 0.000506303 Jy ! Component: 500 - total flux cleaned = 0.000520649 Jy ! Component: 550 - total flux cleaned = 0.000591493 Jy ! Component: 600 - total flux cleaned = 0.000535346 Jy ! Component: 650 - total flux cleaned = 0.000591124 Jy ! Component: 700 - total flux cleaned = 0.000549675 Jy ! Component: 750 - total flux cleaned = 0.000549662 Jy ! Component: 800 - total flux cleaned = 0.00049534 Jy ! Component: 850 - total flux cleaned = 0.000508798 Jy ! Component: 900 - total flux cleaned = 0.00049537 Jy ! Component: 950 - total flux cleaned = 0.000495301 Jy ! Component: 1000 - total flux cleaned = 0.000495236 Jy ! Component: 1050 - total flux cleaned = 0.000402673 Jy ! Component: 1100 - total flux cleaned = 0.000389526 Jy ! Component: 1150 - total flux cleaned = 0.000428828 Jy ! Component: 1200 - total flux cleaned = 0.000324623 Jy ! Component: 1250 - total flux cleaned = 0.000311745 Jy ! Component: 1300 - total flux cleaned = 0.000273121 Jy ! Component: 1350 - total flux cleaned = 0.000273048 Jy ! Component: 1400 - total flux cleaned = 0.000209244 Jy ! Component: 1450 - total flux cleaned = 0.000221992 Jy ! Component: 1500 - total flux cleaned = 0.00018394 Jy ! Component: 1550 - total flux cleaned = 0.000171256 Jy ! Component: 1600 - total flux cleaned = 0.000121166 Jy ! Component: 1650 - total flux cleaned = 8.36773e-05 Jy ! Component: 1700 - total flux cleaned = 9.06068e-06 Jy ! Component: 1750 - total flux cleaned = 9.1474e-06 Jy ! Component: 1800 - total flux cleaned = 9.18809e-06 Jy ! Component: 1850 - total flux cleaned = -1.53988e-05 Jy ! Component: 1900 - total flux cleaned = -3.99078e-05 Jy ! Component: 1950 - total flux cleaned = -0.000113173 Jy ! Component: 2000 - total flux cleaned = -0.000101046 Jy ! Component: 2050 - total flux cleaned = -0.000125304 Jy ! Component: 2100 - total flux cleaned = -0.00014947 Jy ! Component: 2150 - total flux cleaned = -0.000233654 Jy ! Component: 2200 - total flux cleaned = -0.000257644 Jy ! Component: 2250 - total flux cleaned = -0.000317379 Jy ! Component: 2300 - total flux cleaned = -0.000269663 Jy ! Component: 2350 - total flux cleaned = -0.000317126 Jy ! Component: 2400 - total flux cleaned = -0.000376358 Jy ! Component: 2450 - total flux cleaned = -0.000364527 Jy ! Component: 2500 - total flux cleaned = -0.000352724 Jy ! Component: 2550 - total flux cleaned = -0.000387969 Jy ! Component: 2600 - total flux cleaned = -0.000469805 Jy ! Component: 2650 - total flux cleaned = -0.000481396 Jy ! Component: 2700 - total flux cleaned = -0.000423293 Jy ! Component: 2750 - total flux cleaned = -0.000469727 Jy ! Component: 2800 - total flux cleaned = -0.000504452 Jy ! Component: 2850 - total flux cleaned = -0.00048141 Jy ! Component: 2900 - total flux cleaned = -0.000515865 Jy ! Component: 2950 - total flux cleaned = -0.000573112 Jy ! Component: 3000 - total flux cleaned = -0.000550227 Jy ! Component: 3050 - total flux cleaned = -0.000698388 Jy ! Component: 3100 - total flux cleaned = -0.000664284 Jy ! Component: 3150 - total flux cleaned = -0.00067561 Jy ! Component: 3200 - total flux cleaned = -0.00066431 Jy ! Component: 3250 - total flux cleaned = -0.000698161 Jy ! Component: 3300 - total flux cleaned = -0.000720634 Jy ! Component: 3350 - total flux cleaned = -0.000743082 Jy ! Component: 3400 - total flux cleaned = -0.000776669 Jy ! Component: 3450 - total flux cleaned = -0.000776628 Jy ! Component: 3500 - total flux cleaned = -0.000832297 Jy ! Component: 3550 - total flux cleaned = -0.000854464 Jy ! Component: 3600 - total flux cleaned = -0.000887644 Jy ! Component: 3650 - total flux cleaned = -0.000876608 Jy ! Component: 3700 - total flux cleaned = -0.00090968 Jy ! Component: 3750 - total flux cleaned = -0.000953621 Jy ! Component: 3800 - total flux cleaned = -0.000975498 Jy ! Component: 3850 - total flux cleaned = -0.00103015 Jy ! Component: 3900 - total flux cleaned = -0.00104106 Jy ! Component: 3950 - total flux cleaned = -0.00107371 Jy ! Component: 4000 - total flux cleaned = -0.00100851 Jy ! Component: 4050 - total flux cleaned = -0.00100853 Jy ! Total flux subtracted in 4096 components = -0.00100856 Jy ! Clean residual min=-0.000697 max=0.000580 Jy/beam ! Clean residual mean=-0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.121634 Jy keep ! Adding 388 model components to the UV plane model. ! The established model now contains 478 components and 0.121634 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0842+4525_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6044 x 0.9899 at 4.063 degrees (North through East) ! Clean map min=-0.0013223 max=0.098297 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0842+4525_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0982967 invert ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1643 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176949 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.540045 0.540045 1.08009 2.16018 4.32036 8.64073 17.2815 34.5629 69.1258 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.098 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 555.508 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0842+4525_X_uvs.log closed on Sat Dec 26 09:34:58 2015