! Started logfile: /scr/pima/gb073_uvs/J0841+2319_S_uvs.log on Sat Dec 26 10:13:54 2015 obs /scr/pima/gb073_uvs/J0841+2319_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0841+2319_S_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! AN table 2: 295 integrations on 10 of 10 possible baselines. ! AN table 3: 46 integrations on 55 of 55 possible baselines. ! AN table 4: 19 integrations on 55 of 55 possible baselines. ! AN table 5: 59 integrations on 55 of 55 possible baselines. ! AN table 6: 43 integrations on 6 of 6 possible baselines. ! AN table 7: 47 integrations on 66 of 66 possible baselines. ! Apparent sampling: 0.676596 visibilities/baseline/integration-bin. ! Found source: J0841+2319 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 78864 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0841+2319_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1247 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 140 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 1247 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 140 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 1247 telescope corrections were flagged in sub-array 2. ! A total of 102 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 4. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 186 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 1247 telescope corrections were flagged in sub-array 2. ! A total of 102 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 4. ! A total of 107 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 186 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 1247 telescope corrections were flagged in sub-array 2. ! A total of 102 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 4. ! A total of 165 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 185 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! A total of 1247 telescope corrections were flagged in sub-array 2. ! A total of 102 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 4. ! A total of 165 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 185 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 7. ! A total of 1475 telescope corrections were flagged in sub-array 2. ! A total of 102 telescope corrections were flagged in sub-array 3. ! A total of 38 telescope corrections were flagged in sub-array 4. ! A total of 186 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 207 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 8. ! A total of 1475 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 4. ! A total of 186 telescope corrections were flagged in sub-array 5. ! A total of 172 telescope corrections were flagged in sub-array 6. ! A total of 207 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.022138Jy sigma=7.425158 ! Fit after self-cal, rms=0.919262Jy sigma=7.056381 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.843 mas, bmaj=3.462 mas, bpa=5.991 degrees ! Estimated noise=1.0039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576658 Jy ! Component: 100 - total flux cleaned = 0.0749145 Jy ! Total flux subtracted in 100 components = 0.0749145 Jy ! Clean residual min=-0.007230 max=0.009654 Jy/beam ! Clean residual mean=-0.000006 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.0749145 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0749145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.167298Jy sigma=0.706691 ! Fit after self-cal, rms=0.166222Jy sigma=0.699539 ! Inverting map ! Added new window around map position (3, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111728 Jy ! Component: 100 - total flux cleaned = 0.014883 Jy ! Total flux subtracted in 100 components = 0.014883 Jy ! Clean residual min=-0.006548 max=0.007495 Jy/beam ! Clean residual mean=-0.000008 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.0897975 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 8 components and 0.0897975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165116Jy sigma=0.692214 ! Fit after self-cal, rms=0.164951Jy sigma=0.691558 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.412 mas, bmaj=4.418 mas, bpa=9.948 degrees ! Estimated noise=0.497138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573048 Jy ! Component: 100 - total flux cleaned = 0.00550229 Jy ! Component: 150 - total flux cleaned = 0.00529054 Jy ! Component: 200 - total flux cleaned = 0.00509357 Jy ! Total flux subtracted in 200 components = 0.00509357 Jy ! Clean residual min=-0.003990 max=0.005673 Jy/beam ! Clean residual mean=-0.000020 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.0948911 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.0948911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.164224Jy sigma=0.694501 ! Fit after self-cal, rms=0.164213Jy sigma=0.694413 ! Inverting map ! Added new window around map position (-11.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171755 Jy ! Component: 100 - total flux cleaned = 0.00202661 Jy ! Component: 150 - total flux cleaned = 0.00166756 Jy ! Component: 200 - total flux cleaned = 0.00156114 Jy ! Total flux subtracted in 200 components = 0.00156114 Jy ! Clean residual min=-0.004061 max=0.004803 Jy/beam ! Clean residual mean=-0.000021 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0964522 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.0964522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.163770Jy sigma=0.692589 ! Fit after self-cal, rms=0.163634Jy sigma=0.692055 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.412 x 4.418 at 9.948 degrees (North through East) ! Clean map min=-0.0042035 max=0.082649 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 KP 1.11 LA 1.02 ! MK 1.00 NL 1.01 OV 1.01 PT 1.00 ! SC 0.89 ! ! A total of 228 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.09 KP 1.08 LA 1.08 ! MK 0.88 NL 1.02 OV 1.12 PT 1.16 ! SC 1.00 ! ! A total of 228 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 KP 1.07 LA 1.03 ! MK 0.97 NL 1.08 OV 1.00* PT 0.92 ! SC 1.17 ! ! A total of 228 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 KP 1.07 LA 0.99 ! MK 0.96 NL 1.03 OV 1.00* PT 1.10 ! SC 0.96 ! ! A total of 228 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 228 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 KP 0.93 LA 1.05 ! MK 0.88 NL 1.06 OV 1.15 PT 1.00* ! SC 0.95 ! ! A total of 228 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.18 EF 1.00* FD 1.12 KP 0.89 ! LA 0.92 MC 1.00* MK 1.03 NL 1.14 ! OV 1.13 PT 1.07 SC 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.06 KP 0.85 LA 0.89 ! MK 0.90 NL 1.09 OV 0.96 PT 0.96 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=0.163634Jy sigma=0.692055 ! Fit after self-cal, rms=0.154968Jy sigma=0.683910 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.385 mas, bmaj=4.516 mas, bpa=9.247 degrees ! Estimated noise=0.502636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-83, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020423 Jy ! Component: 100 - total flux cleaned = 0.00315635 Jy ! Component: 150 - total flux cleaned = 0.00357941 Jy ! Component: 200 - total flux cleaned = 0.00367371 Jy ! Total flux subtracted in 200 components = 0.00367371 Jy ! Clean residual min=-0.003581 max=0.003881 Jy/beam ! Clean residual mean=-0.000021 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.100126 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 0.100126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154783Jy sigma=0.680879 ! Fit after self-cal, rms=0.154696Jy sigma=0.680499 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154696Jy sigma=0.680499 ! Fit after self-cal, rms=0.154696Jy sigma=0.680478 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=4.514 mas, bpa=9.238 degrees ! Estimated noise=0.503122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128058 Jy ! Component: 100 - total flux cleaned = 0.00166436 Jy ! Component: 150 - total flux cleaned = 0.00174732 Jy ! Component: 200 - total flux cleaned = 0.00174428 Jy ! Total flux subtracted in 200 components = 0.00174428 Jy ! Clean residual min=-0.003404 max=0.003457 Jy/beam ! Clean residual mean=-0.000021 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.10187 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 55 components and 0.10187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154566Jy sigma=0.679076 ! Fit after self-cal, rms=0.154511Jy sigma=0.678901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000878758 Jy ! Component: 100 - total flux cleaned = 0.000876718 Jy ! Component: 150 - total flux cleaned = 0.00119491 Jy ! Component: 200 - total flux cleaned = 0.00138047 Jy ! Total flux subtracted in 200 components = 0.00138047 Jy ! Clean residual min=-0.003170 max=0.003039 Jy/beam ! Clean residual mean=-0.000020 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.103251 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 78 components and 0.103251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154348Jy sigma=0.675584 ! Fit after self-cal, rms=0.154220Jy sigma=0.675303 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154220Jy sigma=0.675303 ! Fit after self-cal, rms=0.154278Jy sigma=0.675294 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.382 mas, bmaj=4.512 mas, bpa=9.239 degrees ! Estimated noise=0.503726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260403 Jy ! Component: 100 - total flux cleaned = 0.000449887 Jy ! Component: 150 - total flux cleaned = 0.000534497 Jy ! Component: 200 - total flux cleaned = 0.000615111 Jy ! Total flux subtracted in 200 components = 0.000615111 Jy ! Clean residual min=-0.003060 max=0.002833 Jy/beam ! Clean residual mean=-0.000020 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.103866 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 85 components and 0.103866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154150Jy sigma=0.673804 ! Fit after self-cal, rms=0.154048Jy sigma=0.673685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201884 Jy ! Component: 100 - total flux cleaned = 0.000284555 Jy ! Component: 150 - total flux cleaned = 0.000442391 Jy ! Component: 200 - total flux cleaned = 0.000518617 Jy ! Total flux subtracted in 200 components = 0.000518617 Jy ! Clean residual min=-0.002964 max=0.002765 Jy/beam ! Clean residual mean=-0.000020 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.104384 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 91 components and 0.104384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153937Jy sigma=0.672877 ! Fit after self-cal, rms=0.153861Jy sigma=0.672775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153861Jy sigma=0.672775 ! Fit after self-cal, rms=0.153871Jy sigma=0.672770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.58 mas, bmaj=10.05 mas, bpa=-86.37 degrees ! Estimated noise=0.669819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418603 Jy ! Component: 100 - total flux cleaned = 0.000323325 Jy ! Component: 150 - total flux cleaned = 0.000180897 Jy ! Component: 200 - total flux cleaned = 9.01719e-05 Jy ! Total flux subtracted in 200 components = 9.01719e-05 Jy ! Clean residual min=-0.003254 max=0.003165 Jy/beam ! Clean residual mean=-0.000045 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.104475 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.104475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153854Jy sigma=0.672922 ! Fit after self-cal, rms=0.153842Jy sigma=0.672880 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.20079e-05 Jy ! Component: 100 - total flux cleaned = 5.59805e-05 Jy ! Component: 150 - total flux cleaned = 5.05712e-06 Jy ! Component: 200 - total flux cleaned = -4.12702e-05 Jy ! Total flux subtracted in 200 components = -4.12702e-05 Jy ! Clean residual min=-0.003239 max=0.003159 Jy/beam ! Clean residual mean=-0.000046 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.104433 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.104433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.153832Jy sigma=0.673009 ! Fit after self-cal, rms=0.153830Jy sigma=0.672996 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=4.512 mas, bpa=9.253 degrees ! Estimated noise=0.503846 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.383 x 4.512 at 9.253 degrees (North through East) ! Clean map min=-0.0040914 max=0.082241 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.829 mas, bmaj=3.52 mas, bpa=5.63 degrees ! Estimated noise=1.01481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573173 Jy ! Component: 100 - total flux cleaned = 0.0770217 Jy ! Component: 150 - total flux cleaned = 0.0865177 Jy ! Component: 200 - total flux cleaned = 0.0904239 Jy ! Total flux subtracted in 200 components = 0.0904239 Jy ! Clean residual min=-0.006492 max=0.006664 Jy/beam ! Clean residual mean=-0.000008 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.0904239 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0904239 Jy ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=4.512 mas, bpa=9.253 degrees ! Estimated noise=0.503846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901701 Jy ! Component: 100 - total flux cleaned = 0.0110311 Jy ! Component: 150 - total flux cleaned = 0.0118003 Jy ! Component: 200 - total flux cleaned = 0.0123245 Jy ! Total flux subtracted in 200 components = 0.0123245 Jy ! Clean residual min=-0.003294 max=0.003607 Jy/beam ! Clean residual mean=-0.000021 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.102748 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.102748 Jy ! Inverting map ! Added new window around map position (-13.5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175415 Jy ! Component: 100 - total flux cleaned = 0.00250019 Jy ! Component: 150 - total flux cleaned = 0.00278269 Jy ! Component: 200 - total flux cleaned = 0.00304738 Jy ! Total flux subtracted in 200 components = 0.00304738 Jy ! Clean residual min=-0.003117 max=0.003162 Jy/beam ! Clean residual mean=-0.000021 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.105796 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.105796 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.58 mas, bmaj=10.05 mas, bpa=-86.37 degrees ! Estimated noise=0.669819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245432 Jy ! Component: 100 - total flux cleaned = 5.88049e-05 Jy ! Component: 150 - total flux cleaned = 5.25865e-05 Jy ! Component: 200 - total flux cleaned = -6.22389e-05 Jy ! Total flux subtracted in 200 components = -6.22389e-05 Jy ! Clean residual min=-0.003167 max=0.002976 Jy/beam ! Clean residual mean=-0.000045 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.105733 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101133 Jy ! Component: 100 - total flux cleaned = -0.000192304 Jy ! Component: 150 - total flux cleaned = -0.000276347 Jy ! Component: 200 - total flux cleaned = -0.000377737 Jy ! Total flux subtracted in 200 components = -0.000377737 Jy ! Clean residual min=-0.003110 max=0.002939 Jy/beam ! Clean residual mean=-0.000045 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.105356 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.105356 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.383 mas, bmaj=4.512 mas, bpa=9.253 degrees ! Estimated noise=0.503846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118345 Jy ! Component: 100 - total flux cleaned = 0.000341038 Jy ! Component: 150 - total flux cleaned = 0.00044232 Jy ! Component: 200 - total flux cleaned = 0.000441172 Jy ! Total flux subtracted in 200 components = 0.000441172 Jy ! Clean residual min=-0.003103 max=0.002921 Jy/beam ! Clean residual mean=-0.000021 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.105797 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 88 components and 0.105797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.154026Jy sigma=0.674084 ! Fit after self-cal, rms=0.154061Jy sigma=0.673829 wmodel /scr/pima/gb073_uvs/J0841+2319_S_map.mod ! Writing 88 model components to file: /scr/pima/gb073_uvs/J0841+2319_S_map.mod wobs /scr/pima/gb073_uvs/J0841+2319_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0841+2319_S_uvs.fits wwins /scr/pima/gb073_uvs/J0841+2319_S_map.win ! wwins: Wrote 6 windows to /scr/pima/gb073_uvs/J0841+2319_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263514 Jy ! Component: 100 - total flux cleaned = 0.000629757 Jy ! Component: 150 - total flux cleaned = 0.000780546 Jy ! Component: 200 - total flux cleaned = 0.00102284 Jy ! Component: 250 - total flux cleaned = 0.00125858 Jy ! Component: 300 - total flux cleaned = 0.00158231 Jy ! Component: 350 - total flux cleaned = 0.00198989 Jy ! Component: 400 - total flux cleaned = 0.00221241 Jy ! Component: 450 - total flux cleaned = 0.00256232 Jy ! Component: 500 - total flux cleaned = 0.0026484 Jy ! Component: 550 - total flux cleaned = 0.00281896 Jy ! Component: 600 - total flux cleaned = 0.00302756 Jy ! Component: 650 - total flux cleaned = 0.00302718 Jy ! Component: 700 - total flux cleaned = 0.0030679 Jy ! Component: 750 - total flux cleaned = 0.00306869 Jy ! Component: 800 - total flux cleaned = 0.00318854 Jy ! Component: 850 - total flux cleaned = 0.00315006 Jy ! Component: 900 - total flux cleaned = 0.00330574 Jy ! Component: 950 - total flux cleaned = 0.00330595 Jy ! Component: 1000 - total flux cleaned = 0.00326886 Jy ! Component: 1050 - total flux cleaned = 0.00338129 Jy ! Component: 1100 - total flux cleaned = 0.00323249 Jy ! Component: 1150 - total flux cleaned = 0.00312226 Jy ! Component: 1200 - total flux cleaned = 0.00297709 Jy ! Component: 1250 - total flux cleaned = 0.00294069 Jy ! Component: 1300 - total flux cleaned = 0.00294064 Jy ! Component: 1350 - total flux cleaned = 0.00293981 Jy ! Component: 1400 - total flux cleaned = 0.00269455 Jy ! Component: 1450 - total flux cleaned = 0.0027291 Jy ! Component: 1500 - total flux cleaned = 0.00266005 Jy ! Component: 1550 - total flux cleaned = 0.00255766 Jy ! Component: 1600 - total flux cleaned = 0.00255728 Jy ! Component: 1650 - total flux cleaned = 0.00245657 Jy ! Component: 1700 - total flux cleaned = 0.00232355 Jy ! Component: 1750 - total flux cleaned = 0.0024228 Jy ! Component: 1800 - total flux cleaned = 0.0023244 Jy ! Component: 1850 - total flux cleaned = 0.00238971 Jy ! Component: 1900 - total flux cleaned = 0.0022928 Jy ! Component: 1950 - total flux cleaned = 0.00235699 Jy ! Component: 2000 - total flux cleaned = 0.0024208 Jy ! Component: 2050 - total flux cleaned = 0.00238918 Jy ! Component: 2100 - total flux cleaned = 0.00235808 Jy ! Component: 2150 - total flux cleaned = 0.00232679 Jy ! Component: 2200 - total flux cleaned = 0.00235778 Jy ! Component: 2250 - total flux cleaned = 0.00241942 Jy ! Component: 2300 - total flux cleaned = 0.00232783 Jy ! Component: 2350 - total flux cleaned = 0.00238824 Jy ! Component: 2400 - total flux cleaned = 0.00250871 Jy ! Component: 2450 - total flux cleaned = 0.00250834 Jy ! Component: 2500 - total flux cleaned = 0.00256743 Jy ! Component: 2550 - total flux cleaned = 0.00239002 Jy ! Component: 2600 - total flux cleaned = 0.00256651 Jy ! Component: 2650 - total flux cleaned = 0.00262491 Jy ! Component: 2700 - total flux cleaned = 0.00256699 Jy ! Component: 2750 - total flux cleaned = 0.00268233 Jy ! Component: 2800 - total flux cleaned = 0.00268237 Jy ! Component: 2850 - total flux cleaned = 0.00273979 Jy ! Component: 2900 - total flux cleaned = 0.00271147 Jy ! Component: 2950 - total flux cleaned = 0.00273983 Jy ! Component: 3000 - total flux cleaned = 0.00276791 Jy ! Component: 3050 - total flux cleaned = 0.0027959 Jy ! Component: 3100 - total flux cleaned = 0.00276841 Jy ! Component: 3150 - total flux cleaned = 0.00304379 Jy ! Component: 3200 - total flux cleaned = 0.00315308 Jy ! Component: 3250 - total flux cleaned = 0.00315305 Jy ! Component: 3300 - total flux cleaned = 0.00318035 Jy ! Component: 3350 - total flux cleaned = 0.00312654 Jy ! Component: 3400 - total flux cleaned = 0.0032335 Jy ! Component: 3450 - total flux cleaned = 0.0031536 Jy ! Component: 3500 - total flux cleaned = 0.00323315 Jy ! Component: 3550 - total flux cleaned = 0.0032859 Jy ! Component: 3600 - total flux cleaned = 0.00336451 Jy ! Component: 3650 - total flux cleaned = 0.00341674 Jy ! Component: 3700 - total flux cleaned = 0.00336516 Jy ! Component: 3750 - total flux cleaned = 0.00339106 Jy ! Component: 3800 - total flux cleaned = 0.00362186 Jy ! Component: 3850 - total flux cleaned = 0.00380064 Jy ! Component: 3900 - total flux cleaned = 0.00382595 Jy ! Component: 3950 - total flux cleaned = 0.00372457 Jy ! Component: 4000 - total flux cleaned = 0.00395123 Jy ! Component: 4050 - total flux cleaned = 0.00402637 Jy ! Total flux subtracted in 4096 components = 0.00410113 Jy ! Clean residual min=-0.001409 max=0.001560 Jy/beam ! Clean residual mean=-0.000011 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.109898 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 412 components and 0.109898 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0841+2319_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.383 x 4.512 at 9.253 degrees (North through East) ! Clean map min=-0.0035812 max=0.081589 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0841+2319_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0815895 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000447096 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.64395 1.64395 3.28789 6.57579 13.1516 26.3032 52.6063 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.081 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 182.487 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0841+2319_S_uvs.log closed on Sat Dec 26 10:14:01 2015