! Started logfile: /scr/pima/gb073_uvs/J0744+2920_X_uvs.log on Sat Dec 26 09:33:40 2015 obs /scr/pima/gb073_uvs/J0744+2920_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0744+2920_X_uva.fits ! AN table 1: 15 integrations on 36 of 36 possible baselines. ! AN table 2: 116 integrations on 10 of 10 possible baselines. ! AN table 3: 22 integrations on 15 of 15 possible baselines. ! AN table 4: 29 integrations on 36 of 36 possible baselines. ! AN table 5: 20 integrations on 66 of 66 possible baselines. ! AN table 6: 13 integrations on 55 of 55 possible baselines. ! AN table 7: 19 integrations on 3 of 3 possible baselines. ! AN table 8: 23 integrations on 15 of 15 possible baselines. ! AN table 9: 27 integrations on 55 of 55 possible baselines. ! AN table 10: 24 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.651556 visibilities/baseline/integration-bin. ! Found source: J0744+2920 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 46224 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0744+2920_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 65 telescope corrections were flagged in sub-array 4. ! A total of 65 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 57 telescope corrections were flagged in sub-array 9. ! A total of 96 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 65 telescope corrections were flagged in sub-array 4. ! A total of 65 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 57 telescope corrections were flagged in sub-array 9. ! A total of 96 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 65 telescope corrections were flagged in sub-array 4. ! A total of 65 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 57 telescope corrections were flagged in sub-array 9. ! A total of 96 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 65 telescope corrections were flagged in sub-array 4. ! A total of 65 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 57 telescope corrections were flagged in sub-array 9. ! A total of 96 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 106 telescope corrections were flagged in sub-array 4. ! A total of 81 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 86 telescope corrections were flagged in sub-array 9. ! A total of 114 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 106 telescope corrections were flagged in sub-array 4. ! A total of 81 telescope corrections were flagged in sub-array 5. ! A total of 13 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 86 telescope corrections were flagged in sub-array 9. ! A total of 114 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 7. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 65 telescope corrections were flagged in sub-array 4. ! A total of 65 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 57 telescope corrections were flagged in sub-array 9. ! A total of 96 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 8. ! A total of 169 telescope corrections were flagged in sub-array 2. ! A total of 41 telescope corrections were flagged in sub-array 3. ! A total of 65 telescope corrections were flagged in sub-array 4. ! A total of 65 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 8. ! A total of 57 telescope corrections were flagged in sub-array 9. ! A total of 96 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.008395Jy sigma=8.422862 ! Fit after self-cal, rms=0.912930Jy sigma=7.672334 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.5243 mas, bmaj=0.8362 mas, bpa=-18.38 degrees ! Estimated noise=0.990318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0667122 Jy ! Component: 100 - total flux cleaned = 0.0854482 Jy ! Total flux subtracted in 100 components = 0.0854482 Jy ! Clean residual min=-0.003874 max=0.008345 Jy/beam ! Clean residual mean=0.000000 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.0854482 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0854482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.098024Jy sigma=0.663864 ! Fit after self-cal, rms=0.097228Jy sigma=0.659447 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100043 Jy ! Component: 100 - total flux cleaned = 0.0152449 Jy ! Total flux subtracted in 100 components = 0.0152449 Jy ! Clean residual min=-0.004464 max=0.004557 Jy/beam ! Clean residual mean=-0.000000 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.100693 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 7 components and 0.100693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095977Jy sigma=0.647141 ! Fit after self-cal, rms=0.095864Jy sigma=0.646721 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6795 mas, bmaj=0.9764 mas, bpa=-18.86 degrees ! Estimated noise=0.457155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443098 Jy ! Component: 100 - total flux cleaned = 0.00576069 Jy ! Component: 150 - total flux cleaned = 0.00583863 Jy ! Component: 200 - total flux cleaned = 0.00576664 Jy ! Total flux subtracted in 200 components = 0.00576664 Jy ! Clean residual min=-0.002598 max=0.002605 Jy/beam ! Clean residual mean=-0.000006 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.10646 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.10646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095589Jy sigma=0.644660 ! Fit after self-cal, rms=0.095565Jy sigma=0.644548 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-5.4, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267537 Jy ! Component: 100 - total flux cleaned = 0.00307395 Jy ! Component: 150 - total flux cleaned = 0.00313956 Jy ! Component: 200 - total flux cleaned = 0.00337047 Jy ! Total flux subtracted in 200 components = 0.00337047 Jy ! Clean residual min=-0.002254 max=0.002160 Jy/beam ! Clean residual mean=-0.000008 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.10983 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.10983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095461Jy sigma=0.643449 ! Fit after self-cal, rms=0.095446Jy sigma=0.643358 ! Inverting map ! Your choice of large map pixels excluded 0.338% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6795 x 0.9764 at -18.86 degrees (North through East) ! Clean map min=-0.0019444 max=0.088865 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 KP 1.00 LA 1.08 ! MK 1.03 NL 0.90 OV 0.99 PT 0.98 ! SC 1.00 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 0.94 MC 0.88 ON 0.88 ! ZC 0.85 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 0.96 MC 0.93 ON 0.89 ! SC 0.52 ZC 0.90 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 EF 1.00* HH 0.97 LA 0.92 ! MC 0.81 NL 1.10 ON 1.04 SC 0.82 ! ZC 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 EF 1.00* FD 0.98 KP 1.01 ! LA 1.03 MC 1.09 MK 1.00 NL 1.01 ! ON 0.90 OV 1.02 PT 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.91 FD 1.02 KP 1.05 LA 0.94 ! MC 0.82 MK 1.18 NL 1.00 ON 1.06 ! PT 0.89 SC 1.01 ZC 0.84 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 1.22 MC 0.87 NL 1.00* ON 0.96 ! SC 0.91 ZC 0.72 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.03 EF 1.00* FD 0.94 HH 0.87 ! LA 1.08 MC 0.96 NL 1.04 ON 0.86 ! PT 0.93 SC 1.02 ZC 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 0.95 EF 1.00* FD 1.00 KP 1.02 ! LA 1.08 MC 0.91 MK 1.11 NL 0.91 ! ON 0.90 OV 1.04 PT 0.90 SC 0.98 ! ZC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.11 KP 0.99 LA 1.02 ! MK 1.02 NL 0.93 OV 1.05 PT 1.02 ! SC 1.27 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00 MC 0.96 ON 0.78 ! ZC 0.83 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.23 MC 0.97 ON 0.79 ! SC 0.69 ZC 0.90 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 EF 1.00* HH 1.00 LA 1.01 ! MC 1.04 NL 1.20 ON 0.86 SC 1.00 ! ZC 0.84 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 EF 1.00* FD 1.01 KP 1.09 ! LA 1.06 MC 1.07 MK 1.14 NL 0.99 ! ON 0.96 OV 1.04 PT 1.02 SC 1.12 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.07 FD 0.96 KP 1.01 LA 1.04 ! MC 1.04 MK 1.02 NL 0.96 ON 1.04 ! PT 1.07 SC 0.96 ZC 0.87 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 0.95 MC 1.02 NL 1.00* ON 0.85 ! SC 0.96 ZC 0.82 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.04 EF 1.00* FD 1.05 HH 1.03 ! LA 1.17 MC 0.96 NL 0.97 ON 0.90 ! PT 1.08 SC 1.00 ZC 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 0.94 EF 1.00* FD 1.07 KP 1.02 ! LA 1.06 MC 1.02 MK 1.16 NL 0.94 ! ON 0.94 OV 1.03 PT 0.99 SC 1.01 ! ZC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 KP 0.91 LA 0.99 ! MK 0.98 NL 0.91 OV 1.03 PT 1.00 ! SC 1.22 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 0.97 MC 1.00 ON 0.81 ! ZC 0.83 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 0.84 MC 0.98 ON 0.78 ! SC 0.66 ZC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 EF 1.00* HH 1.04 LA 1.04 ! MC 0.88 NL 0.93 ON 0.89 SC 0.92 ! ZC 0.87 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 EF 1.00* FD 0.96 KP 0.95 ! LA 0.98 MC 0.91 MK 1.16 NL 1.04 ! ON 0.88 OV 0.97 PT 0.98 SC 1.07 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.99 KP 0.91 LA 1.00 ! MC 0.80 MK 1.02 NL 0.99 ON 0.96 ! PT 0.99 SC 1.10 ZC 0.81 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 0.91 MC 0.93 NL 1.00* ON 0.90 ! SC 0.89 ZC 0.86 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.01 EF 1.00* FD 1.02 HH 0.78 ! LA 1.06 MC 0.97 NL 0.94 ON 1.07 ! PT 1.06 SC 0.97 ZC 0.87 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 0.92 EF 1.00* FD 0.97 KP 1.03 ! LA 0.99 MC 0.99 MK 1.02 NL 1.01 ! ON 0.80 OV 1.03 PT 1.00 SC 1.00 ! ZC 0.81 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 KP 1.01 LA 0.93 ! MK 1.03 NL 0.90 OV 1.04 PT 1.04 ! SC 1.12 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.06 MC 1.01 ON 0.88 ! ZC 0.76 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.03 MC 0.85 ON 0.92 ! SC 0.69 ZC 0.89 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 EF 1.00* HH 0.99 LA 1.06 ! MC 0.83 NL 1.03 ON 0.87 SC 0.95 ! ZC 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 EF 1.00* FD 1.00 KP 1.01 ! LA 0.96 MC 0.87 MK 1.11 NL 1.11 ! ON 0.91 OV 0.98 PT 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.03 FD 1.03 KP 1.03 LA 0.94 ! MC 1.11 MK 1.07 NL 0.94 ON 0.89 ! PT 1.04 SC 1.01 ZC 0.90 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 0.86 MC 1.14 NL 1.00* ON 0.77 ! SC 0.87 ZC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.14 EF 1.00* FD 1.01 HH 0.82 ! LA 1.07 MC 1.07 NL 0.96 ON 0.95 ! PT 1.13 SC 0.99 ZC 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 0.97 EF 1.00* FD 0.99 KP 1.01 ! LA 1.03 MC 0.90 MK 1.19 NL 0.97 ! ON 0.84 OV 1.03 PT 0.98 SC 1.12 ! ZC 0.82 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 KP 0.88 LA 0.99 ! MK 1.01 NL 1.01 OV 1.08 PT 0.98 ! SC 1.34 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.05 MC 1.17 ON 1.09 ! ZC 0.87 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.29 MC 0.89 ON 1.45 ! SC 0.61 ZC 0.90 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* HH 1.05 LA 1.01 ! MC 1.22 NL 1.11 ON 1.01 SC 0.87 ! ZC 0.86 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.05 KP 1.00 ! LA 1.09 MC 1.36 MK 1.18 NL 1.10 ! ON 1.01 OV 1.09 PT 0.92 SC 1.16 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.02 KP 1.03 LA 1.04 ! MC 1.14 MK 1.11 NL 0.96 ON 1.28 ! PT 0.98 SC 0.92 ZC 0.90 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 0.98 MC 1.08 NL 1.00* ON 1.05 ! SC 1.03 ZC 0.89 ! ! A total of 9 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 0.91 HH 1.07 ! LA 1.03 MC 1.13 NL 0.92 ON 1.10 ! PT 1.03 SC 1.04 ZC 0.88 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 1.00* EF 1.00* FD 0.96 KP 0.93 ! LA 1.03 MC 1.20 MK 2.73 NL 0.98 ! ON 1.20 OV 0.98 PT 1.03 SC 1.04 ! ZC 0.88 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 KP 0.88 LA 0.95 ! MK 0.99 NL 1.06 OV 1.13 PT 0.93 ! SC 1.18 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 0.99 MC 1.12 ON 1.03 ! ZC 0.86 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 0.98 MC 1.34 ON 1.13 ! SC 0.79 ZC 0.79 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* HH 1.06 LA 0.88 ! MC 1.01 NL 1.22 ON 1.07 SC 0.95 ! ZC 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.10 KP 0.94 ! LA 0.95 MC 1.19 MK 1.07 NL 1.07 ! ON 1.11 OV 1.00 PT 0.92 SC 1.12 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00 KP 0.94 LA 0.84 ! MC 1.09 MK 1.18 NL 1.05 ON 1.12 ! PT 0.84 SC 0.98 ZC 0.89 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 1.08 MC 1.14 NL 1.00* ON 0.94 ! SC 1.03 ZC 0.98 ! ! A total of 9 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 0.94 HH 0.97 ! LA 1.18 MC 1.06 NL 0.95 ON 1.15 ! PT 1.04 SC 1.02 ZC 0.89 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 1.00* EF 1.00* FD 1.01 KP 0.91 ! LA 0.98 MC 1.12 MK 2.49 NL 1.03 ! ON 1.25 OV 1.19 PT 0.97 SC 1.07 ! ZC 0.81 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 KP 0.86 LA 1.01 ! MK 1.10 NL 1.06 OV 1.05 PT 1.02 ! SC 1.14 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.04 MC 1.06 ON 1.02 ! ZC 0.77 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 0.93 MC 1.25 ON 0.97 ! SC 0.51 ZC 0.74 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 EF 1.00* HH 0.99 LA 1.14 ! MC 1.12 NL 0.99 ON 1.22 SC 0.95 ! ZC 0.72 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 EF 1.00* FD 1.07 KP 0.99 ! LA 1.02 MC 1.11 MK 1.05 NL 1.08 ! ON 1.31 OV 1.07 PT 1.00 SC 1.03 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 1.04 KP 0.91 LA 1.09 ! MC 1.30 MK 1.26 NL 1.20 ON 1.61 ! PT 1.04 SC 0.99 ZC 0.77 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 0.99 MC 1.03 NL 1.00* ON 1.09 ! SC 0.88 ZC 0.73 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.98 EF 1.00* FD 1.07 HH 1.07 ! LA 1.20 MC 1.25 NL 1.09 ON 1.07 ! PT 1.00 SC 1.03 ZC 0.74 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 1.06 EF 1.00* FD 1.05 KP 0.93 ! LA 1.09 MC 1.34 MK 1.21 NL 1.11 ! ON 1.27 OV 1.10 PT 0.99 SC 1.03 ! ZC 0.72 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.13 KP 0.92 LA 0.99 ! MK 1.09 NL 1.02 OV 1.16 PT 0.94 ! SC 1.19 ! ! A total of 63 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.09 MC 1.14 ON 1.01 ! ZC 0.68 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.08 MC 1.06 ON 0.91 ! SC 0.61 ZC 0.90 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 EF 1.00* HH 0.95 LA 1.17 ! MC 1.07 NL 0.93 ON 1.23 SC 0.90 ! ZC 0.84 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 EF 1.00* FD 1.05 KP 0.99 ! LA 1.06 MC 1.17 MK 1.17 NL 1.06 ! ON 1.31 OV 0.99 PT 0.98 SC 1.03 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 1.06 KP 0.88 LA 1.12 ! MC 1.18 MK 1.14 NL 1.19 ON 1.13 ! PT 0.92 SC 1.01 ZC 0.62 ! ! A total of 51 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! HH 0.91 MC 1.10 NL 1.00* ON 1.14 ! SC 0.93 ZC 0.66 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.13 EF 1.00* FD 1.01 HH 0.88 ! LA 1.12 MC 1.10 NL 1.09 ON 1.01 ! PT 1.00 SC 1.02 ZC 0.89 ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 0.92 EF 1.00* FD 0.97 KP 0.97 ! LA 1.06 MC 1.53 MK 1.09 NL 1.01 ! ON 1.24 OV 1.13 PT 1.13 SC 0.97 ! ZC 0.69 ! ! ! Fit before self-cal, rms=0.095446Jy sigma=0.643358 ! Fit after self-cal, rms=0.095175Jy sigma=0.637390 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6613 mas, bmaj=0.9975 mas, bpa=-17.96 degrees ! Estimated noise=0.457669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167291 Jy ! Component: 100 - total flux cleaned = 0.00243442 Jy ! Component: 150 - total flux cleaned = 0.00273413 Jy ! Component: 200 - total flux cleaned = 0.00290481 Jy ! Total flux subtracted in 200 components = 0.00290481 Jy ! Clean residual min=-0.001304 max=0.001535 Jy/beam ! Clean residual mean=0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.112735 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.112735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095134Jy sigma=0.637013 ! Fit after self-cal, rms=0.095443Jy sigma=0.636258 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (34.4, -23.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112027 Jy ! Component: 100 - total flux cleaned = 0.00125796 Jy ! Component: 150 - total flux cleaned = 0.00137873 Jy ! Component: 200 - total flux cleaned = 0.00146197 Jy ! Total flux subtracted in 200 components = 0.00146197 Jy ! Clean residual min=-0.001218 max=0.001415 Jy/beam ! Clean residual mean=-0.000000 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.114197 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.114197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095414Jy sigma=0.636008 ! Fit after self-cal, rms=0.095411Jy sigma=0.635981 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.095411Jy sigma=0.635981 ! Fit after self-cal, rms=0.096655Jy sigma=0.635297 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6568 mas, bmaj=0.9972 mas, bpa=-17.83 degrees ! Estimated noise=0.458709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112852 Jy ! Component: 100 - total flux cleaned = 0.0015408 Jy ! Component: 150 - total flux cleaned = 0.00177769 Jy ! Component: 200 - total flux cleaned = 0.00192023 Jy ! Total flux subtracted in 200 components = 0.00192023 Jy ! Clean residual min=-0.001196 max=0.001395 Jy/beam ! Clean residual mean=0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.116117 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.116117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096632Jy sigma=0.635125 ! Fit after self-cal, rms=0.096753Jy sigma=0.635026 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47.2, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121805 Jy ! Component: 100 - total flux cleaned = 0.00153854 Jy ! Component: 150 - total flux cleaned = 0.00158858 Jy ! Component: 200 - total flux cleaned = 0.00158893 Jy ! Total flux subtracted in 200 components = 0.00158893 Jy ! Clean residual min=-0.001178 max=0.001272 Jy/beam ! Clean residual mean=0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.117706 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.117706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096732Jy sigma=0.634831 ! Fit after self-cal, rms=0.096730Jy sigma=0.634811 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-39.6, 11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831974 Jy ! Component: 100 - total flux cleaned = 0.00105043 Jy ! Component: 150 - total flux cleaned = 0.00114908 Jy ! Component: 200 - total flux cleaned = 0.00117275 Jy ! Total flux subtracted in 200 components = 0.00117275 Jy ! Clean residual min=-0.001154 max=0.001155 Jy/beam ! Clean residual mean=0.000002 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.118879 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.118879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096710Jy sigma=0.634653 ! Fit after self-cal, rms=0.096709Jy sigma=0.634637 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (47.4, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865033 Jy ! Component: 100 - total flux cleaned = 0.000892228 Jy ! Component: 150 - total flux cleaned = 0.000868431 Jy ! Component: 200 - total flux cleaned = 0.000823254 Jy ! Total flux subtracted in 200 components = 0.000823254 Jy ! Clean residual min=-0.001127 max=0.001163 Jy/beam ! Clean residual mean=0.000002 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.119702 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 0.119702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096691Jy sigma=0.634497 ! Fit after self-cal, rms=0.096693Jy sigma=0.634485 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-28.6, 49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058101 Jy ! Component: 100 - total flux cleaned = 0.000836671 Jy ! Component: 150 - total flux cleaned = 0.000950643 Jy ! Component: 200 - total flux cleaned = 0.000972364 Jy ! Total flux subtracted in 200 components = 0.000972364 Jy ! Clean residual min=-0.001101 max=0.001131 Jy/beam ! Clean residual mean=0.000002 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.120674 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 100 components and 0.120674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096676Jy sigma=0.634356 ! Fit after self-cal, rms=0.096675Jy sigma=0.634344 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-4.6, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100197 Jy ! Component: 100 - total flux cleaned = 0.00139921 Jy ! Component: 150 - total flux cleaned = 0.00155467 Jy ! Component: 200 - total flux cleaned = 0.00161835 Jy ! Total flux subtracted in 200 components = 0.00161835 Jy ! Clean residual min=-0.001048 max=0.001099 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.122293 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 112 components and 0.122293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096660Jy sigma=0.634211 ! Fit after self-cal, rms=0.096661Jy sigma=0.634200 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-17.2, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000944744 Jy ! Component: 100 - total flux cleaned = 0.00129819 Jy ! Component: 150 - total flux cleaned = 0.00136308 Jy ! Component: 200 - total flux cleaned = 0.0014449 Jy ! Total flux subtracted in 200 components = 0.0014449 Jy ! Clean residual min=-0.001043 max=0.001026 Jy/beam ! Clean residual mean=0.000001 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.123738 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 120 components and 0.123738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096646Jy sigma=0.634077 ! Fit after self-cal, rms=0.096653Jy sigma=0.634065 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.096653Jy sigma=0.634065 ! Fit after self-cal, rms=0.097427Jy sigma=0.633883 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6554 mas, bmaj=0.9949 mas, bpa=-17.74 degrees ! Estimated noise=0.460015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00079733 Jy ! Component: 100 - total flux cleaned = 0.00137609 Jy ! Component: 150 - total flux cleaned = 0.00167349 Jy ! Component: 200 - total flux cleaned = 0.00188905 Jy ! Total flux subtracted in 200 components = 0.00188905 Jy ! Clean residual min=-0.001071 max=0.001024 Jy/beam ! Clean residual mean=0.000001 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.125627 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 130 components and 0.125627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097412Jy sigma=0.633790 ! Fit after self-cal, rms=0.097469Jy sigma=0.633764 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383575 Jy ! Component: 100 - total flux cleaned = 0.000445955 Jy ! Component: 150 - total flux cleaned = 0.00048661 Jy ! Component: 200 - total flux cleaned = 0.000544919 Jy ! Total flux subtracted in 200 components = 0.000544919 Jy ! Clean residual min=-0.001049 max=0.001023 Jy/beam ! Clean residual mean=0.000001 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.126172 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 134 components and 0.126172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097459Jy sigma=0.633703 ! Fit after self-cal, rms=0.097461Jy sigma=0.633701 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097461Jy sigma=0.633701 ! Fit after self-cal, rms=0.097954Jy sigma=0.633676 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=2.317 mas, bmaj=2.806 mas, bpa=7.007 degrees ! Estimated noise=0.60964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357172 Jy ! Component: 100 - total flux cleaned = 0.000538526 Jy ! Component: 150 - total flux cleaned = 0.000697145 Jy ! Component: 200 - total flux cleaned = 0.000852479 Jy ! Total flux subtracted in 200 components = 0.000852479 Jy ! Clean residual min=-0.001160 max=0.001308 Jy/beam ! Clean residual mean=0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.127024 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 156 components and 0.127024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097948Jy sigma=0.633666 ! Fit after self-cal, rms=0.097977Jy sigma=0.633656 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45.2, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615461 Jy ! Component: 100 - total flux cleaned = 0.000625014 Jy ! Component: 150 - total flux cleaned = 0.000643563 Jy ! Component: 200 - total flux cleaned = 0.000732452 Jy ! Total flux subtracted in 200 components = 0.000732452 Jy ! Clean residual min=-0.001223 max=0.001048 Jy/beam ! Clean residual mean=0.000002 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.127757 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 194 components and 0.127757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.097969Jy sigma=0.633581 ! Fit after self-cal, rms=0.097967Jy sigma=0.633567 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6547 mas, bmaj=0.9935 mas, bpa=-17.71 degrees ! Estimated noise=0.461582 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6547 x 0.9935 at -17.71 degrees (North through East) ! Clean map min=-0.0012453 max=0.088531 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.5056 mas, bmaj=0.8615 mas, bpa=-17.05 degrees ! Estimated noise=0.975687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0646526 Jy ! Component: 100 - total flux cleaned = 0.0856944 Jy ! Component: 150 - total flux cleaned = 0.0961961 Jy ! Component: 200 - total flux cleaned = 0.10203 Jy ! Total flux subtracted in 200 components = 0.10203 Jy ! Clean residual min=-0.003199 max=0.003381 Jy/beam ! Clean residual mean=0.000001 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.10203 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.10203 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6547 mas, bmaj=0.9935 mas, bpa=-17.71 degrees ! Estimated noise=0.461582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00473541 Jy ! Component: 100 - total flux cleaned = 0.00784059 Jy ! Component: 150 - total flux cleaned = 0.0103207 Jy ! Component: 200 - total flux cleaned = 0.0124619 Jy ! Total flux subtracted in 200 components = 0.0124619 Jy ! Clean residual min=-0.001412 max=0.001513 Jy/beam ! Clean residual mean=0.000004 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.114492 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 35 components and 0.114492 Jy ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-49.4, 15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194186 Jy ! Component: 100 - total flux cleaned = 0.00367532 Jy ! Component: 150 - total flux cleaned = 0.00524444 Jy ! Component: 200 - total flux cleaned = 0.00656134 Jy ! Total flux subtracted in 200 components = 0.00656134 Jy ! Clean residual min=-0.001322 max=0.001190 Jy/beam ! Clean residual mean=0.000003 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.121053 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 47 components and 0.121053 Jy ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=2.317 mas, bmaj=2.806 mas, bpa=7.007 degrees ! Estimated noise=0.60964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172974 Jy ! Component: 100 - total flux cleaned = 0.00280968 Jy ! Component: 150 - total flux cleaned = 0.00345403 Jy ! Component: 200 - total flux cleaned = 0.00395554 Jy ! Total flux subtracted in 200 components = 0.00395554 Jy ! Clean residual min=-0.001356 max=0.001150 Jy/beam ! Clean residual mean=0.000005 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.125009 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00044869 Jy ! Component: 100 - total flux cleaned = 0.000832488 Jy ! Component: 150 - total flux cleaned = 0.00121558 Jy ! Component: 200 - total flux cleaned = 0.00149594 Jy ! Total flux subtracted in 200 components = 0.00149594 Jy ! Clean residual min=-0.001343 max=0.001139 Jy/beam ! Clean residual mean=0.000004 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.126504 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 108 components and 0.126504 Jy ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6547 mas, bmaj=0.9935 mas, bpa=-17.71 degrees ! Estimated noise=0.461582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085787 Jy ! Component: 100 - total flux cleaned = 0.00111347 Jy ! Component: 150 - total flux cleaned = 0.0012331 Jy ! Component: 200 - total flux cleaned = 0.00138665 Jy ! Total flux subtracted in 200 components = 0.00138665 Jy ! Clean residual min=-0.001203 max=0.001079 Jy/beam ! Clean residual mean=0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.127891 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 130 components and 0.127891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.098066Jy sigma=0.634302 ! Fit after self-cal, rms=0.098047Jy sigma=0.634158 wmodel /scr/pima/gb073_uvs/J0744+2920_X_map.mod ! Writing 130 model components to file: /scr/pima/gb073_uvs/J0744+2920_X_map.mod wobs /scr/pima/gb073_uvs/J0744+2920_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0744+2920_X_uvs.fits wwins /scr/pima/gb073_uvs/J0744+2920_X_map.win ! wwins: Wrote 12 windows to /scr/pima/gb073_uvs/J0744+2920_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036222 Jy ! Component: 100 - total flux cleaned = -0.000461878 Jy ! Component: 150 - total flux cleaned = -0.000577443 Jy ! Component: 200 - total flux cleaned = -0.000765387 Jy ! Component: 250 - total flux cleaned = -0.000875727 Jy ! Component: 300 - total flux cleaned = -0.00102059 Jy ! Component: 350 - total flux cleaned = -0.00121617 Jy ! Component: 400 - total flux cleaned = -0.00126865 Jy ! Component: 450 - total flux cleaned = -0.00130337 Jy ! Component: 500 - total flux cleaned = -0.00135474 Jy ! Component: 550 - total flux cleaned = -0.00142225 Jy ! Component: 600 - total flux cleaned = -0.0014722 Jy ! Component: 650 - total flux cleaned = -0.0015054 Jy ! Component: 700 - total flux cleaned = -0.00158755 Jy ! Component: 750 - total flux cleaned = -0.00163625 Jy ! Component: 800 - total flux cleaned = -0.00170099 Jy ! Component: 850 - total flux cleaned = -0.0018131 Jy ! Component: 900 - total flux cleaned = -0.0018765 Jy ! Component: 950 - total flux cleaned = -0.0020023 Jy ! Component: 1000 - total flux cleaned = -0.00201796 Jy ! Component: 1050 - total flux cleaned = -0.00211087 Jy ! Component: 1100 - total flux cleaned = -0.00211083 Jy ! Component: 1150 - total flux cleaned = -0.00217212 Jy ! Component: 1200 - total flux cleaned = -0.00217203 Jy ! Component: 1250 - total flux cleaned = -0.00227755 Jy ! Component: 1300 - total flux cleaned = -0.00224767 Jy ! Component: 1350 - total flux cleaned = -0.00223281 Jy ! Component: 1400 - total flux cleaned = -0.00227724 Jy ! Component: 1450 - total flux cleaned = -0.00230668 Jy ! Component: 1500 - total flux cleaned = -0.00235034 Jy ! Component: 1550 - total flux cleaned = -0.00242318 Jy ! Component: 1600 - total flux cleaned = -0.00243756 Jy ! Component: 1650 - total flux cleaned = -0.00245191 Jy ! Component: 1700 - total flux cleaned = -0.00245187 Jy ! Component: 1750 - total flux cleaned = -0.00245187 Jy ! Component: 1800 - total flux cleaned = -0.00255107 Jy ! Component: 1850 - total flux cleaned = -0.00252286 Jy ! Component: 1900 - total flux cleaned = -0.00257889 Jy ! Component: 1950 - total flux cleaned = -0.00259287 Jy ! Component: 2000 - total flux cleaned = -0.0025928 Jy ! Component: 2050 - total flux cleaned = -0.00260671 Jy ! Component: 2100 - total flux cleaned = -0.00260666 Jy ! Component: 2150 - total flux cleaned = -0.0026615 Jy ! Component: 2200 - total flux cleaned = -0.00267497 Jy ! Component: 2250 - total flux cleaned = -0.00268849 Jy ! Component: 2300 - total flux cleaned = -0.00272911 Jy ! Component: 2350 - total flux cleaned = -0.00272922 Jy ! Component: 2400 - total flux cleaned = -0.00274266 Jy ! Component: 2450 - total flux cleaned = -0.00279595 Jy ! Component: 2500 - total flux cleaned = -0.00279599 Jy ! Component: 2550 - total flux cleaned = -0.00280926 Jy ! Component: 2600 - total flux cleaned = -0.0028619 Jy ! Component: 2650 - total flux cleaned = -0.0028356 Jy ! Component: 2700 - total flux cleaned = -0.00286164 Jy ! Component: 2750 - total flux cleaned = -0.00287464 Jy ! Component: 2800 - total flux cleaned = -0.00287471 Jy ! Component: 2850 - total flux cleaned = -0.00286186 Jy ! Component: 2900 - total flux cleaned = -0.00287464 Jy ! Component: 2950 - total flux cleaned = -0.00290022 Jy ! Component: 3000 - total flux cleaned = -0.0028493 Jy ! Component: 3050 - total flux cleaned = -0.00288745 Jy ! Component: 3100 - total flux cleaned = -0.00291276 Jy ! Component: 3150 - total flux cleaned = -0.00298846 Jy ! Component: 3200 - total flux cleaned = -0.00300106 Jy ! Component: 3250 - total flux cleaned = -0.0030261 Jy ! Component: 3300 - total flux cleaned = -0.00306335 Jy ! Component: 3350 - total flux cleaned = -0.00303859 Jy ! Component: 3400 - total flux cleaned = -0.00310048 Jy ! Component: 3450 - total flux cleaned = -0.00305112 Jy ! Component: 3500 - total flux cleaned = -0.00308807 Jy ! Component: 3550 - total flux cleaned = -0.00316155 Jy ! Component: 3600 - total flux cleaned = -0.00325921 Jy ! Component: 3650 - total flux cleaned = -0.00329571 Jy ! Component: 3700 - total flux cleaned = -0.00329569 Jy ! Component: 3750 - total flux cleaned = -0.00329561 Jy ! Component: 3800 - total flux cleaned = -0.00328358 Jy ! Component: 3850 - total flux cleaned = -0.00341554 Jy ! Component: 3900 - total flux cleaned = -0.00331995 Jy ! Component: 3950 - total flux cleaned = -0.00333191 Jy ! Component: 4000 - total flux cleaned = -0.00341501 Jy ! Component: 4050 - total flux cleaned = -0.00341504 Jy ! Total flux subtracted in 4096 components = -0.00341501 Jy ! Clean residual min=-0.000633 max=0.000603 Jy/beam ! Clean residual mean=0.000002 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.124476 Jy keep ! Adding 360 model components to the UV plane model. ! The established model now contains 490 components and 0.124476 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0744+2920_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6547 x 0.9935 at -17.71 degrees (North through East) ! Clean map min=-0.00091416 max=0.088187 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0744+2920_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0881867 invert ! Inverting map ! Your choice of large map pixels excluded 0.349% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194017 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.660021 0.660021 1.32004 2.64008 5.28016 10.5603 21.1207 42.2413 84.4826 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.088 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 454.531 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0744+2920_X_uvs.log closed on Sat Dec 26 09:33:48 2015