! Started logfile: /scr/pima/gb073_uvs/J0730-1141_S_uvs.log on Sat Dec 26 10:12:43 2015 obs /scr/pima/gb073_uvs/J0730-1141_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0730-1141_S_uva.fits ! AN table 1: 24 integrations on 6 of 6 possible baselines. ! AN table 2: 24 integrations on 10 of 10 possible baselines. ! AN table 3: 36 integrations on 15 of 15 possible baselines. ! AN table 4: 11 integrations on 45 of 45 possible baselines. ! AN table 5: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905162 visibilities/baseline/integration-bin. ! Found source: J0730-1141 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 18096 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0730-1141_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 42 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 42 telescope corrections were flagged in sub-array 3. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 42 telescope corrections were flagged in sub-array 3. ! A total of 11 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 42 telescope corrections were flagged in sub-array 3. ! A total of 11 telescope corrections were flagged in sub-array 4. ! A total of 20 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 42 telescope corrections were flagged in sub-array 3. ! A total of 11 telescope corrections were flagged in sub-array 4. ! A total of 41 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 42 telescope corrections were flagged in sub-array 3. ! A total of 11 telescope corrections were flagged in sub-array 4. ! A total of 41 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 120 telescope corrections were flagged in sub-array 2. ! A total of 117 telescope corrections were flagged in sub-array 3. ! A total of 11 telescope corrections were flagged in sub-array 4. ! A total of 70 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 96 telescope corrections were flagged in sub-array 1. ! A total of 87 telescope corrections were flagged in sub-array 2. ! A total of 95 telescope corrections were flagged in sub-array 3. ! A total of 11 telescope corrections were flagged in sub-array 4. ! A total of 70 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=2.274030Jy sigma=10.125593 ! Fit after self-cal, rms=1.276415Jy sigma=5.734445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.456 mas, bmaj=2.42 mas, bpa=16.4 degrees ! Estimated noise=1.87522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.864984 Jy ! Component: 100 - total flux cleaned = 1.25029 Jy ! Total flux subtracted in 100 components = 1.25029 Jy ! Clean residual min=-0.110930 max=0.252318 Jy/beam ! Clean residual mean=-0.000439 rms=0.028612 Jy/beam ! Combined flux in latest and established models = 1.25029 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.25029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.219594Jy sigma=4.542405 ! Fit after self-cal, rms=1.219784Jy sigma=4.540366 ! Inverting map ! Added new window around map position (-7, 10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.261691 Jy ! Component: 100 - total flux cleaned = 0.438674 Jy ! Total flux subtracted in 100 components = 0.438674 Jy ! Clean residual min=-0.098062 max=0.182282 Jy/beam ! Clean residual mean=-0.000441 rms=0.024955 Jy/beam ! Combined flux in latest and established models = 1.68896 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 1.68896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.093561Jy sigma=4.470462 ! Fit after self-cal, rms=1.089248Jy sigma=4.449264 ! Inverting map ! Added new window around map position (15.5, -19). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172848 Jy ! Component: 100 - total flux cleaned = 0.300979 Jy ! Total flux subtracted in 100 components = 0.300979 Jy ! Clean residual min=-0.098185 max=0.116969 Jy/beam ! Clean residual mean=-0.000431 rms=0.022001 Jy/beam ! Combined flux in latest and established models = 1.98994 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 1.98994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.029600Jy sigma=4.421890 ! Fit after self-cal, rms=1.028769Jy sigma=4.414406 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.789 mas, bmaj=2.565 mas, bpa=19.94 degrees ! Estimated noise=1.21005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0964317 Jy ! Component: 100 - total flux cleaned = 0.139335 Jy ! Component: 150 - total flux cleaned = 0.154391 Jy ! Component: 200 - total flux cleaned = 0.158224 Jy ! Total flux subtracted in 200 components = 0.158224 Jy ! Clean residual min=-0.174712 max=0.195126 Jy/beam ! Clean residual mean=-0.001691 rms=0.046494 Jy/beam ! Combined flux in latest and established models = 2.14816 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 2.14816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=1.016677Jy sigma=4.296519 ! Fit after self-cal, rms=1.016834Jy sigma=4.286819 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.789 x 2.565 at 19.94 degrees (North through East) ! Clean map min=-0.16656 max=1.1874 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 5. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 6. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* FD 1.00* HH 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=1.016834Jy sigma=4.286819 ! Fit after self-cal, rms=0.924973Jy sigma=4.082316 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.75 mas, bmaj=2.647 mas, bpa=16.46 degrees ! Estimated noise=1.26413 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571928 Jy ! Component: 100 - total flux cleaned = 0.0816168 Jy ! Component: 150 - total flux cleaned = 0.0950606 Jy ! Component: 200 - total flux cleaned = 0.102138 Jy ! Total flux subtracted in 200 components = 0.102138 Jy ! Clean residual min=-0.157392 max=0.187292 Jy/beam ! Clean residual mean=-0.001835 rms=0.041976 Jy/beam ! Combined flux in latest and established models = 2.2503 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 2.2503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.907119Jy sigma=4.106221 ! Fit after self-cal, rms=0.907424Jy sigma=4.104736 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.907424Jy sigma=4.104736 ! Fit after self-cal, rms=0.908067Jy sigma=4.093693 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.75 mas, bmaj=2.651 mas, bpa=16.45 degrees ! Estimated noise=1.26199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00754948 Jy ! Component: 100 - total flux cleaned = -0.00158419 Jy ! Component: 150 - total flux cleaned = 0.00377522 Jy ! Component: 200 - total flux cleaned = 0.00624414 Jy ! Total flux subtracted in 200 components = 0.00624414 Jy ! Clean residual min=-0.154593 max=0.186062 Jy/beam ! Clean residual mean=-0.001950 rms=0.041555 Jy/beam ! Combined flux in latest and established models = 2.25655 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 2.25655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.903754Jy sigma=4.082915 ! Fit after self-cal, rms=0.903629Jy sigma=4.081978 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196151 Jy ! Component: 100 - total flux cleaned = 0.315218 Jy ! Component: 150 - total flux cleaned = 0.394483 Jy ! Component: 200 - total flux cleaned = 0.458818 Jy ! Total flux subtracted in 200 components = 0.458818 Jy ! Clean residual min=-0.120196 max=0.137686 Jy/beam ! Clean residual mean=-0.000853 rms=0.030744 Jy/beam ! Combined flux in latest and established models = 2.71536 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 79 components and 2.71536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.868091Jy sigma=3.499546 ! Fit after self-cal, rms=0.860640Jy sigma=3.469986 ! Inverting map ! Added new window around map position (-9.5, -118). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137062 Jy ! Component: 100 - total flux cleaned = 0.216611 Jy ! Component: 150 - total flux cleaned = 0.28018 Jy ! Component: 200 - total flux cleaned = 0.333896 Jy ! Total flux subtracted in 200 components = 0.333896 Jy ! Clean residual min=-0.108262 max=0.115236 Jy/beam ! Clean residual mean=-0.000826 rms=0.026339 Jy/beam ! Combined flux in latest and established models = 3.04926 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 107 components and 3.04926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.829315Jy sigma=3.225672 ! Fit after self-cal, rms=0.829593Jy sigma=3.201422 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.829593Jy sigma=3.201422 ! Fit after self-cal, rms=0.830353Jy sigma=3.197056 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.751 mas, bmaj=2.652 mas, bpa=16.46 degrees ! Estimated noise=1.26522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562021 Jy ! Component: 100 - total flux cleaned = 0.0910507 Jy ! Component: 150 - total flux cleaned = 0.125645 Jy ! Component: 200 - total flux cleaned = 0.158379 Jy ! Total flux subtracted in 200 components = 0.158379 Jy ! Clean residual min=-0.106587 max=0.110366 Jy/beam ! Clean residual mean=-0.000764 rms=0.024903 Jy/beam ! Combined flux in latest and established models = 3.20764 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 112 components and 3.20764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.816065Jy sigma=3.138157 ! Fit after self-cal, rms=0.817709Jy sigma=3.133866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, 123). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107768 Jy ! Component: 100 - total flux cleaned = 0.171408 Jy ! Component: 150 - total flux cleaned = 0.22168 Jy ! Component: 200 - total flux cleaned = 0.263306 Jy ! Total flux subtracted in 200 components = 0.263306 Jy ! Clean residual min=-0.099969 max=0.088189 Jy/beam ! Clean residual mean=-0.000829 rms=0.022064 Jy/beam ! Combined flux in latest and established models = 3.47094 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 136 components and 3.47094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.792528Jy sigma=2.973452 ! Fit after self-cal, rms=0.787143Jy sigma=2.958616 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.787143Jy sigma=2.958616 ! Fit after self-cal, rms=0.784217Jy sigma=2.948490 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.12 mas, bmaj=16.58 mas, bpa=8.732 degrees ! Estimated noise=2.16261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123608 Jy ! Component: 100 - total flux cleaned = 0.206781 Jy ! Component: 150 - total flux cleaned = 0.252386 Jy ! Component: 200 - total flux cleaned = 0.290333 Jy ! Total flux subtracted in 200 components = 0.290333 Jy ! Clean residual min=-0.184187 max=0.160028 Jy/beam ! Clean residual mean=-0.001778 rms=0.054758 Jy/beam ! Combined flux in latest and established models = 3.76128 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 143 components and 3.76128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.762341Jy sigma=3.080636 ! Fit after self-cal, rms=0.761983Jy sigma=3.070549 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325952 Jy ! Component: 100 - total flux cleaned = 0.0638413 Jy ! Component: 150 - total flux cleaned = 0.0842881 Jy ! Component: 200 - total flux cleaned = 0.0994044 Jy ! Total flux subtracted in 200 components = 0.0994044 Jy ! Clean residual min=-0.174620 max=0.159531 Jy/beam ! Clean residual mean=-0.001383 rms=0.053804 Jy/beam ! Combined flux in latest and established models = 3.86068 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 149 components and 3.86068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.755848Jy sigma=3.160369 ! Fit after self-cal, rms=0.755479Jy sigma=3.158114 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.75 mas, bmaj=2.649 mas, bpa=16.61 degrees ! Estimated noise=1.26971 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.75 x 2.649 at 16.61 degrees (North through East) ! Clean map min=-0.10421 max=1.3513 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.755479Jy sigma=3.158114 ! Fit after self-cal, rms=0.754978Jy sigma=3.150258 ! Inverting map and beam ! Estimated beam: bmin=1.752 mas, bmaj=2.649 mas, bpa=16.69 degrees ! Estimated noise=1.27612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121914 Jy ! Component: 100 - total flux cleaned = 0.0148795 Jy ! Component: 150 - total flux cleaned = 0.0148862 Jy ! Component: 200 - total flux cleaned = 0.0179742 Jy ! Total flux subtracted in 200 components = 0.0179742 Jy ! Clean residual min=-0.106748 max=0.081904 Jy/beam ! Clean residual mean=-0.000403 rms=0.021614 Jy/beam ! Combined flux in latest and established models = 3.87866 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 163 components and 3.87865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.755814Jy sigma=3.007630 ! Fit after self-cal, rms=0.755895Jy sigma=3.005595 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397971 Jy ! Component: 100 - total flux cleaned = 0.00572215 Jy ! Component: 150 - total flux cleaned = 0.00731158 Jy ! Component: 200 - total flux cleaned = 0.00954127 Jy ! Total flux subtracted in 200 components = 0.00954127 Jy ! Clean residual min=-0.102814 max=0.080589 Jy/beam ! Clean residual mean=-0.000413 rms=0.021420 Jy/beam ! Combined flux in latest and established models = 3.8882 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 172 components and 3.8882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.755481Jy sigma=2.963978 ! Fit after self-cal, rms=0.755584Jy sigma=2.963245 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.755584Jy sigma=2.963245 ! Fit after self-cal, rms=0.755972Jy sigma=2.960653 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.432 mas, bmaj=2.509 mas, bpa=15.15 degrees ! Estimated noise=1.95402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.888508 Jy ! Component: 100 - total flux cleaned = 1.30022 Jy ! Component: 150 - total flux cleaned = 1.55922 Jy ! Component: 200 - total flux cleaned = 1.75114 Jy ! Total flux subtracted in 200 components = 1.75114 Jy ! Clean residual min=-0.110508 max=0.157764 Jy/beam ! Clean residual mean=-0.000527 rms=0.024246 Jy/beam ! Combined flux in latest and established models = 1.75114 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 1.75114 Jy ! Inverting map and beam ! Estimated beam: bmin=1.752 mas, bmaj=2.648 mas, bpa=16.69 degrees ! Estimated noise=1.276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21808 Jy ! Component: 100 - total flux cleaned = 0.393184 Jy ! Component: 150 - total flux cleaned = 0.547373 Jy ! Component: 200 - total flux cleaned = 0.685554 Jy ! Total flux subtracted in 200 components = 0.685554 Jy ! Clean residual min=-0.104955 max=0.130263 Jy/beam ! Clean residual mean=-0.000992 rms=0.029718 Jy/beam ! Combined flux in latest and established models = 2.4367 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 64 components and 2.4367 Jy ! Inverting map ! Added new window around map position (7, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138597 Jy ! Component: 100 - total flux cleaned = 0.254888 Jy ! Component: 150 - total flux cleaned = 0.360091 Jy ! Component: 200 - total flux cleaned = 0.455632 Jy ! Total flux subtracted in 200 components = 0.455632 Jy ! Clean residual min=-0.093394 max=0.101506 Jy/beam ! Clean residual mean=-0.000922 rms=0.025728 Jy/beam ! Combined flux in latest and established models = 2.89233 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 94 components and 2.89233 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.14 mas, bmaj=16.58 mas, bpa=8.707 degrees ! Estimated noise=2.16888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230042 Jy ! Component: 100 - total flux cleaned = 0.394902 Jy ! Component: 150 - total flux cleaned = 0.525857 Jy ! Component: 200 - total flux cleaned = 0.630428 Jy ! Total flux subtracted in 200 components = 0.630428 Jy ! Clean residual min=-0.179685 max=0.165262 Jy/beam ! Clean residual mean=-0.002057 rms=0.055638 Jy/beam ! Combined flux in latest and established models = 3.52276 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0837504 Jy ! Component: 100 - total flux cleaned = 0.151665 Jy ! Component: 150 - total flux cleaned = 0.206872 Jy ! Component: 200 - total flux cleaned = 0.251813 Jy ! Total flux subtracted in 200 components = 0.251813 Jy ! Clean residual min=-0.171153 max=0.159040 Jy/beam ! Clean residual mean=-0.001932 rms=0.053844 Jy/beam ! Combined flux in latest and established models = 3.77457 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 119 components and 3.77457 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.752 mas, bmaj=2.648 mas, bpa=16.69 degrees ! Estimated noise=1.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0084795 Jy ! Component: 100 - total flux cleaned = 0.0273537 Jy ! Component: 150 - total flux cleaned = 0.0326855 Jy ! Component: 200 - total flux cleaned = 0.0347937 Jy ! Total flux subtracted in 200 components = 0.0347937 Jy ! Clean residual min=-0.110877 max=0.088460 Jy/beam ! Clean residual mean=-0.000438 rms=0.022206 Jy/beam ! Combined flux in latest and established models = 3.80936 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 3.80936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.766196Jy sigma=3.087196 ! Fit after self-cal, rms=0.759549Jy sigma=3.064922 wmodel /scr/pima/gb073_uvs/J0730-1141_S_map.mod ! Writing 132 model components to file: /scr/pima/gb073_uvs/J0730-1141_S_map.mod wobs /scr/pima/gb073_uvs/J0730-1141_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0730-1141_S_uvs.fits wwins /scr/pima/gb073_uvs/J0730-1141_S_map.win ! wwins: Wrote 7 windows to /scr/pima/gb073_uvs/J0730-1141_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0295701 Jy ! Component: 100 - total flux cleaned = -0.0402455 Jy ! Component: 150 - total flux cleaned = -0.0388425 Jy ! Component: 200 - total flux cleaned = -0.0388572 Jy ! Component: 250 - total flux cleaned = -0.0388847 Jy ! Component: 300 - total flux cleaned = -0.0339518 Jy ! Component: 350 - total flux cleaned = -0.0280631 Jy ! Component: 400 - total flux cleaned = -0.0223677 Jy ! Component: 450 - total flux cleaned = -0.0234632 Jy ! Component: 500 - total flux cleaned = -0.0213068 Jy ! Component: 550 - total flux cleaned = -0.0191987 Jy ! Component: 600 - total flux cleaned = -0.0171554 Jy ! Component: 650 - total flux cleaned = -0.0171626 Jy ! Component: 700 - total flux cleaned = -0.0171401 Jy ! Component: 750 - total flux cleaned = -0.0181143 Jy ! Component: 800 - total flux cleaned = -0.0181125 Jy ! Component: 850 - total flux cleaned = -0.0190174 Jy ! Component: 900 - total flux cleaned = -0.0172245 Jy ! Component: 950 - total flux cleaned = -0.0198541 Jy ! Component: 1000 - total flux cleaned = -0.018116 Jy ! Component: 1050 - total flux cleaned = -0.0181192 Jy ! Component: 1100 - total flux cleaned = -0.0172895 Jy ! Component: 1150 - total flux cleaned = -0.0164814 Jy ! Component: 1200 - total flux cleaned = -0.0156711 Jy ! Component: 1250 - total flux cleaned = -0.0164684 Jy ! Component: 1300 - total flux cleaned = -0.0149004 Jy ! Component: 1350 - total flux cleaned = -0.014123 Jy ! Component: 1400 - total flux cleaned = -0.0141127 Jy ! Component: 1450 - total flux cleaned = -0.0126366 Jy ! Component: 1500 - total flux cleaned = -0.0133769 Jy ! Component: 1550 - total flux cleaned = -0.0111902 Jy ! Component: 1600 - total flux cleaned = -0.0097617 Jy ! Component: 1650 - total flux cleaned = -0.00694473 Jy ! Component: 1700 - total flux cleaned = -0.00833792 Jy ! Component: 1750 - total flux cleaned = -0.00559264 Jy ! Component: 1800 - total flux cleaned = -0.00558736 Jy ! Component: 1850 - total flux cleaned = -0.00290232 Jy ! Component: 1900 - total flux cleaned = -0.00223238 Jy ! Component: 1950 - total flux cleaned = 0.00235592 Jy ! Component: 2000 - total flux cleaned = 0.00105167 Jy ! Component: 2050 - total flux cleaned = 0.00426027 Jy ! Component: 2100 - total flux cleaned = 0.00869389 Jy ! Component: 2150 - total flux cleaned = 0.00994328 Jy ! Component: 2200 - total flux cleaned = 0.0124251 Jy ! Component: 2250 - total flux cleaned = 0.0148838 Jy ! Component: 2300 - total flux cleaned = 0.0154856 Jy ! Component: 2350 - total flux cleaned = 0.017898 Jy ! Component: 2400 - total flux cleaned = 0.0197023 Jy ! Component: 2450 - total flux cleaned = 0.0220754 Jy ! Component: 2500 - total flux cleaned = 0.0226697 Jy ! Component: 2550 - total flux cleaned = 0.0273343 Jy ! Component: 2600 - total flux cleaned = 0.0267545 Jy ! Component: 2650 - total flux cleaned = 0.0284738 Jy ! Component: 2700 - total flux cleaned = 0.0301721 Jy ! Component: 2750 - total flux cleaned = 0.0307405 Jy ! Component: 2800 - total flux cleaned = 0.0318628 Jy ! Component: 2850 - total flux cleaned = 0.0329725 Jy ! Component: 2900 - total flux cleaned = 0.0324298 Jy ! Component: 2950 - total flux cleaned = 0.0351564 Jy ! Component: 3000 - total flux cleaned = 0.035694 Jy ! Component: 3050 - total flux cleaned = 0.0346257 Jy ! Component: 3100 - total flux cleaned = 0.0351599 Jy ! Component: 3150 - total flux cleaned = 0.0372676 Jy ! Component: 3200 - total flux cleaned = 0.0356964 Jy ! Component: 3250 - total flux cleaned = 0.0362085 Jy ! Component: 3300 - total flux cleaned = 0.0372457 Jy ! Component: 3350 - total flux cleaned = 0.0367381 Jy ! Component: 3400 - total flux cleaned = 0.0372491 Jy ! Component: 3450 - total flux cleaned = 0.0387596 Jy ! Component: 3500 - total flux cleaned = 0.0387591 Jy ! Component: 3550 - total flux cleaned = 0.038765 Jy ! Component: 3600 - total flux cleaned = 0.0407345 Jy ! Component: 3650 - total flux cleaned = 0.0397533 Jy ! Component: 3700 - total flux cleaned = 0.0392681 Jy ! Component: 3750 - total flux cleaned = 0.0412059 Jy ! Component: 3800 - total flux cleaned = 0.0416824 Jy ! Component: 3850 - total flux cleaned = 0.0412103 Jy ! Component: 3900 - total flux cleaned = 0.0416785 Jy ! Component: 3950 - total flux cleaned = 0.0421479 Jy ! Component: 4000 - total flux cleaned = 0.041215 Jy ! Component: 4050 - total flux cleaned = 0.0421408 Jy ! Total flux subtracted in 4096 components = 0.0407548 Jy ! Clean residual min=-0.026984 max=0.028015 Jy/beam ! Clean residual mean=-0.000403 rms=0.008565 Jy/beam ! Combined flux in latest and established models = 3.85012 Jy keep ! Adding 365 model components to the UV plane model. ! The established model now contains 495 components and 3.85012 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0730-1141_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.752 x 2.648 at 16.69 degrees (North through East) ! Clean map min=-0.061664 max=1.3873 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0730-1141_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.38735 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00872946 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.88765 1.88765 3.77531 7.55062 15.1012 30.2025 60.405 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0261 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.387 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 158.927 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0730-1141_S_uvs.log closed on Sat Dec 26 10:12:48 2015