! Started logfile: /scr/pima/gb073_uvs/J0654+4247_S_uvs.log on Sat Dec 26 10:12:19 2015 obs /scr/pima/gb073_uvs/J0654+4247_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0654+4247_S_uva.fits ! AN table 1: 40 integrations on 55 of 55 possible baselines. ! AN table 2: 59 integrations on 55 of 55 possible baselines. ! AN table 3: 118 integrations on 66 of 66 possible baselines. ! AN table 4: 38 integrations on 55 of 55 possible baselines. ! AN table 5: 58 integrations on 15 of 15 possible baselines. ! AN table 6: 50 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.74628 visibilities/baseline/integration-bin. ! Found source: J0654+4247 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 119960 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0654+4247_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 119 telescope corrections were flagged in sub-array 2. ! A total of 242 telescope corrections were flagged in sub-array 3. ! A total of 123 telescope corrections were flagged in sub-array 4. ! A total of 125 telescope corrections were flagged in sub-array 5. ! A total of 118 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! A total of 119 telescope corrections were flagged in sub-array 2. ! A total of 242 telescope corrections were flagged in sub-array 3. ! A total of 123 telescope corrections were flagged in sub-array 4. ! A total of 125 telescope corrections were flagged in sub-array 5. ! A total of 118 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 119 telescope corrections were flagged in sub-array 2. ! A total of 242 telescope corrections were flagged in sub-array 3. ! A total of 123 telescope corrections were flagged in sub-array 4. ! A total of 125 telescope corrections were flagged in sub-array 5. ! A total of 167 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 119 telescope corrections were flagged in sub-array 2. ! A total of 242 telescope corrections were flagged in sub-array 3. ! A total of 123 telescope corrections were flagged in sub-array 4. ! A total of 125 telescope corrections were flagged in sub-array 5. ! A total of 167 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 5. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 177 telescope corrections were flagged in sub-array 2. ! A total of 358 telescope corrections were flagged in sub-array 3. ! A total of 159 telescope corrections were flagged in sub-array 4. ! A total of 125 telescope corrections were flagged in sub-array 5. ! A total of 165 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 6. ! A total of 78 telescope corrections were flagged in sub-array 1. ! A total of 177 telescope corrections were flagged in sub-array 2. ! A total of 358 telescope corrections were flagged in sub-array 3. ! A total of 159 telescope corrections were flagged in sub-array 4. ! A total of 125 telescope corrections were flagged in sub-array 5. ! A total of 165 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 7. ! A total of 89 telescope corrections were flagged in sub-array 1. ! A total of 185 telescope corrections were flagged in sub-array 2. ! A total of 374 telescope corrections were flagged in sub-array 3. ! A total of 169 telescope corrections were flagged in sub-array 4. ! A total of 180 telescope corrections were flagged in sub-array 5. ! A total of 178 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 130 telescope corrections were flagged in sub-array 2. ! A total of 319 telescope corrections were flagged in sub-array 3. ! A total of 134 telescope corrections were flagged in sub-array 4. ! A total of 125 telescope corrections were flagged in sub-array 5. ! A total of 129 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.037581Jy sigma=6.309296 ! Fit after self-cal, rms=0.908424Jy sigma=5.671945 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.66 mas, bmaj=2.561 mas, bpa=20.06 degrees ! Estimated noise=0.968376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.072043 Jy ! Component: 100 - total flux cleaned = 0.0927487 Jy ! Total flux subtracted in 100 components = 0.0927487 Jy ! Clean residual min=-0.007717 max=0.009126 Jy/beam ! Clean residual mean=0.000033 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 0.0927487 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0927487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.248471Jy sigma=0.701803 ! Fit after self-cal, rms=0.247911Jy sigma=0.698367 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113696 Jy ! Component: 100 - total flux cleaned = 0.0185088 Jy ! Total flux subtracted in 100 components = 0.0185088 Jy ! Clean residual min=-0.008006 max=0.008628 Jy/beam ! Clean residual mean=0.000028 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.111257 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.111257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.246631Jy sigma=0.686770 ! Fit after self-cal, rms=0.246559Jy sigma=0.686456 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.14 mas, bmaj=3.467 mas, bpa=25.27 degrees ! Estimated noise=0.456098 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128366 Jy ! Component: 100 - total flux cleaned = 0.0164357 Jy ! Component: 150 - total flux cleaned = 0.0177415 Jy ! Component: 200 - total flux cleaned = 0.0178888 Jy ! Total flux subtracted in 200 components = 0.0178888 Jy ! Clean residual min=-0.003815 max=0.009798 Jy/beam ! Clean residual mean=0.000295 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.129146 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.129146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.245186Jy sigma=0.691324 ! Fit after self-cal, rms=0.245190Jy sigma=0.691299 ! Inverting map ! Added new window around map position (-11, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0090742 Jy ! Component: 100 - total flux cleaned = 0.0142049 Jy ! Component: 150 - total flux cleaned = 0.0175217 Jy ! Component: 200 - total flux cleaned = 0.0183153 Jy ! Total flux subtracted in 200 components = 0.0183153 Jy ! Clean residual min=-0.003945 max=0.005552 Jy/beam ! Clean residual mean=0.000203 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.147462 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.147462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.244819Jy sigma=0.686622 ! Fit after self-cal, rms=0.244764Jy sigma=0.685842 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.14 x 3.467 at 25.27 degrees (North through East) ! Clean map min=-0.0031549 max=0.11147 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 EF 1.00* FD 1.08 KP 0.86 ! LA 0.85 MC 1.00* MK 1.14 NL 1.09 ! OV 0.98 PT 1.03 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.13 EF 1.00* FD 1.14 KP 0.84 ! LA 0.92 MC 1.00* NL 1.07 ON 1.00* ! PT 0.98 SC 0.95 ZC 1.00* ! ! A total of 168 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! SC 0.00* ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Fit before self-cal, rms=0.244764Jy sigma=0.685842 ! Fit after self-cal, rms=0.244420Jy sigma=0.685076 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.141 mas, bmaj=3.47 mas, bpa=25.32 degrees ! Estimated noise=0.456392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00515685 Jy ! Component: 100 - total flux cleaned = 0.0084846 Jy ! Component: 150 - total flux cleaned = 0.00975197 Jy ! Component: 200 - total flux cleaned = 0.0105816 Jy ! Total flux subtracted in 200 components = 0.0105816 Jy ! Clean residual min=-0.003657 max=0.004586 Jy/beam ! Clean residual mean=0.000169 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.158043 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.158043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.244275Jy sigma=0.683309 ! Fit after self-cal, rms=0.244269Jy sigma=0.683091 ! Inverting map ! Added new window around map position (-15.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334158 Jy ! Component: 100 - total flux cleaned = 0.00441771 Jy ! Component: 150 - total flux cleaned = 0.00555916 Jy ! Component: 200 - total flux cleaned = 0.00639709 Jy ! Total flux subtracted in 200 components = 0.00639709 Jy ! Clean residual min=-0.003681 max=0.004248 Jy/beam ! Clean residual mean=0.000142 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.16444 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.16444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.244097Jy sigma=0.680981 ! Fit after self-cal, rms=0.244082Jy sigma=0.680843 ! Inverting map ! Added new window around map position (-2.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341879 Jy ! Component: 100 - total flux cleaned = 0.00403202 Jy ! Component: 150 - total flux cleaned = 0.00467335 Jy ! Component: 200 - total flux cleaned = 0.00526098 Jy ! Total flux subtracted in 200 components = 0.00526098 Jy ! Clean residual min=-0.003642 max=0.003828 Jy/beam ! Clean residual mean=0.000120 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.169701 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 69 components and 0.169701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.243953Jy sigma=0.679224 ! Fit after self-cal, rms=0.243945Jy sigma=0.679107 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.243945Jy sigma=0.679107 ! Fit after self-cal, rms=0.243933Jy sigma=0.679093 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.141 mas, bmaj=3.47 mas, bpa=25.32 degrees ! Estimated noise=0.456294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128018 Jy ! Component: 100 - total flux cleaned = 0.00176898 Jy ! Component: 150 - total flux cleaned = 0.00207449 Jy ! Component: 200 - total flux cleaned = 0.00229581 Jy ! Total flux subtracted in 200 components = 0.00229581 Jy ! Clean residual min=-0.003517 max=0.003731 Jy/beam ! Clean residual mean=0.000110 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.171997 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 75 components and 0.171997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.243859Jy sigma=0.678238 ! Fit after self-cal, rms=0.243834Jy sigma=0.678199 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, 44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131789 Jy ! Component: 100 - total flux cleaned = 0.00157043 Jy ! Component: 150 - total flux cleaned = 0.00186634 Jy ! Component: 200 - total flux cleaned = 0.00244392 Jy ! Total flux subtracted in 200 components = 0.00244392 Jy ! Clean residual min=-0.003340 max=0.003727 Jy/beam ! Clean residual mean=0.000100 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.174441 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.174441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.243727Jy sigma=0.675677 ! Fit after self-cal, rms=0.243701Jy sigma=0.675541 ! Inverting map ! Added new window around map position (-32.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327426 Jy ! Component: 100 - total flux cleaned = 0.00408994 Jy ! Component: 150 - total flux cleaned = 0.00478658 Jy ! Component: 200 - total flux cleaned = 0.00541085 Jy ! Total flux subtracted in 200 components = 0.00541085 Jy ! Clean residual min=-0.003431 max=0.003386 Jy/beam ! Clean residual mean=0.000072 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.179852 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.179852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.243592Jy sigma=0.674021 ! Fit after self-cal, rms=0.243572Jy sigma=0.673929 ! Inverting map ! Added new window around map position (9, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211407 Jy ! Component: 100 - total flux cleaned = 0.00230072 Jy ! Component: 150 - total flux cleaned = 0.00263121 Jy ! Component: 200 - total flux cleaned = 0.00293929 Jy ! Total flux subtracted in 200 components = 0.00293929 Jy ! Clean residual min=-0.003465 max=0.003008 Jy/beam ! Clean residual mean=0.000060 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.182791 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.182791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.243477Jy sigma=0.672529 ! Fit after self-cal, rms=0.243478Jy sigma=0.672459 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.243478Jy sigma=0.672459 ! Fit after self-cal, rms=0.242531Jy sigma=0.672223 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=3.465 mas, bpa=25.23 degrees ! Estimated noise=0.454855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000741117 Jy ! Component: 100 - total flux cleaned = 0.000668065 Jy ! Component: 150 - total flux cleaned = 0.000670046 Jy ! Component: 200 - total flux cleaned = 0.00067128 Jy ! Total flux subtracted in 200 components = 0.00067128 Jy ! Clean residual min=-0.003442 max=0.002926 Jy/beam ! Clean residual mean=0.000059 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.183462 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 130 components and 0.183462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.242470Jy sigma=0.671454 ! Fit after self-cal, rms=0.242480Jy sigma=0.671420 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222569 Jy ! Component: 100 - total flux cleaned = 0.000221705 Jy ! Component: 150 - total flux cleaned = 0.000286229 Jy ! Component: 200 - total flux cleaned = 0.000412098 Jy ! Total flux subtracted in 200 components = 0.000412098 Jy ! Clean residual min=-0.003363 max=0.002901 Jy/beam ! Clean residual mean=0.000057 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.183875 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 137 components and 0.183875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.242432Jy sigma=0.670869 ! Fit after self-cal, rms=0.242439Jy sigma=0.670863 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.242439Jy sigma=0.670863 ! Fit after self-cal, rms=0.242428Jy sigma=0.670890 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.287 mas, bmaj=10.77 mas, bpa=-70.91 degrees ! Estimated noise=0.607066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215866 Jy ! Component: 100 - total flux cleaned = 0.00308708 Jy ! Component: 150 - total flux cleaned = 0.00364326 Jy ! Component: 200 - total flux cleaned = 0.00389811 Jy ! Total flux subtracted in 200 components = 0.00389811 Jy ! Clean residual min=-0.003191 max=0.003464 Jy/beam ! Clean residual mean=0.000103 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.187773 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 149 components and 0.187773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.242440Jy sigma=0.670907 ! Fit after self-cal, rms=0.242439Jy sigma=0.670876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609313 Jy ! Component: 100 - total flux cleaned = 0.000838339 Jy ! Component: 150 - total flux cleaned = 0.00100653 Jy ! Component: 200 - total flux cleaned = 0.00112814 Jy ! Total flux subtracted in 200 components = 0.00112814 Jy ! Clean residual min=-0.003185 max=0.003362 Jy/beam ! Clean residual mean=0.000092 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.188901 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 156 components and 0.188901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.242444Jy sigma=0.670942 ! Fit after self-cal, rms=0.242446Jy sigma=0.670919 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=3.464 mas, bpa=25.2 degrees ! Estimated noise=0.45464 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.136 x 3.464 at 25.2 degrees (North through East) ! Clean map min=-0.004079 max=0.11071 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.658 mas, bmaj=2.559 mas, bpa=19.98 degrees ! Estimated noise=0.964219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716293 Jy ! Component: 100 - total flux cleaned = 0.0937991 Jy ! Component: 150 - total flux cleaned = 0.106234 Jy ! Component: 200 - total flux cleaned = 0.114043 Jy ! Total flux subtracted in 200 components = 0.114043 Jy ! Clean residual min=-0.007691 max=0.008646 Jy/beam ! Clean residual mean=0.000029 rms=0.001538 Jy/beam ! Combined flux in latest and established models = 0.114043 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.114043 Jy ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=3.464 mas, bpa=25.2 degrees ! Estimated noise=0.45464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162691 Jy ! Component: 100 - total flux cleaned = 0.0253121 Jy ! Component: 150 - total flux cleaned = 0.0325681 Jy ! Component: 200 - total flux cleaned = 0.037766 Jy ! Total flux subtracted in 200 components = 0.037766 Jy ! Clean residual min=-0.003808 max=0.005242 Jy/beam ! Clean residual mean=0.000220 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.151809 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.151809 Jy ! Inverting map ! Added new window around map position (-12.5, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447269 Jy ! Component: 100 - total flux cleaned = 0.00784961 Jy ! Component: 150 - total flux cleaned = 0.0110778 Jy ! Component: 200 - total flux cleaned = 0.0132151 Jy ! Total flux subtracted in 200 components = 0.0132151 Jy ! Clean residual min=-0.003580 max=0.004170 Jy/beam ! Clean residual mean=0.000153 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.165024 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 61 components and 0.165024 Jy ! Inverting map ! Added new window around map position (-29, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300193 Jy ! Component: 100 - total flux cleaned = 0.00487298 Jy ! Component: 150 - total flux cleaned = 0.00647948 Jy ! Component: 200 - total flux cleaned = 0.00786029 Jy ! Total flux subtracted in 200 components = 0.00786029 Jy ! Clean residual min=-0.003478 max=0.003473 Jy/beam ! Clean residual mean=0.000114 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.172884 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 75 components and 0.172884 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.287 mas, bmaj=10.77 mas, bpa=-70.91 degrees ! Estimated noise=0.607066 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455418 Jy ! Component: 100 - total flux cleaned = 0.0076361 Jy ! Component: 150 - total flux cleaned = 0.00998198 Jy ! Component: 200 - total flux cleaned = 0.0113066 Jy ! Total flux subtracted in 200 components = 0.0113066 Jy ! Clean residual min=-0.003390 max=0.003350 Jy/beam ! Clean residual mean=0.000157 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.184191 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010152 Jy ! Component: 100 - total flux cleaned = 0.00185016 Jy ! Component: 150 - total flux cleaned = 0.00264691 Jy ! Component: 200 - total flux cleaned = 0.00312851 Jy ! Total flux subtracted in 200 components = 0.00312851 Jy ! Clean residual min=-0.003292 max=0.003243 Jy/beam ! Clean residual mean=0.000115 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.18732 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 107 components and 0.18732 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=3.464 mas, bpa=25.2 degrees ! Estimated noise=0.45464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197435 Jy ! Component: 100 - total flux cleaned = -0.00208898 Jy ! Component: 150 - total flux cleaned = -0.00178396 Jy ! Component: 200 - total flux cleaned = -0.00159079 Jy ! Total flux subtracted in 200 components = -0.00159079 Jy ! Clean residual min=-0.003482 max=0.003057 Jy/beam ! Clean residual mean=0.000049 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.185729 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 123 components and 0.185729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.242754Jy sigma=0.672640 ! Fit after self-cal, rms=0.242721Jy sigma=0.672335 wmodel /scr/pima/gb073_uvs/J0654+4247_S_map.mod ! Writing 123 model components to file: /scr/pima/gb073_uvs/J0654+4247_S_map.mod wobs /scr/pima/gb073_uvs/J0654+4247_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0654+4247_S_uvs.fits wwins /scr/pima/gb073_uvs/J0654+4247_S_map.win ! wwins: Wrote 10 windows to /scr/pima/gb073_uvs/J0654+4247_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518183 Jy ! Component: 100 - total flux cleaned = 2.632e-05 Jy ! Component: 150 - total flux cleaned = 0.000550361 Jy ! Component: 200 - total flux cleaned = 0.00116145 Jy ! Component: 250 - total flux cleaned = 0.00165977 Jy ! Component: 300 - total flux cleaned = 0.00210082 Jy ! Component: 350 - total flux cleaned = 0.00267956 Jy ! Component: 400 - total flux cleaned = 0.00315426 Jy ! Component: 450 - total flux cleaned = 0.00362204 Jy ! Component: 500 - total flux cleaned = 0.0040379 Jy ! Component: 550 - total flux cleaned = 0.00458469 Jy ! Component: 600 - total flux cleaned = 0.00498973 Jy ! Component: 650 - total flux cleaned = 0.0053463 Jy ! Component: 700 - total flux cleaned = 0.00569935 Jy ! Component: 750 - total flux cleaned = 0.00613596 Jy ! Component: 800 - total flux cleaned = 0.00648199 Jy ! Component: 850 - total flux cleaned = 0.00682433 Jy ! Component: 900 - total flux cleaned = 0.00707932 Jy ! Component: 950 - total flux cleaned = 0.00750012 Jy ! Component: 1000 - total flux cleaned = 0.00775025 Jy ! Component: 1050 - total flux cleaned = 0.00812179 Jy ! Component: 1100 - total flux cleaned = 0.00836801 Jy ! Component: 1150 - total flux cleaned = 0.00877423 Jy ! Component: 1200 - total flux cleaned = 0.00909653 Jy ! Component: 1250 - total flux cleaned = 0.00941645 Jy ! Component: 1300 - total flux cleaned = 0.0097342 Jy ! Component: 1350 - total flux cleaned = 0.0100495 Jy ! Component: 1400 - total flux cleaned = 0.0104017 Jy ! Component: 1450 - total flux cleaned = 0.0106347 Jy ! Component: 1500 - total flux cleaned = 0.0110209 Jy ! Component: 1550 - total flux cleaned = 0.0112509 Jy ! Component: 1600 - total flux cleaned = 0.0116701 Jy ! Component: 1650 - total flux cleaned = 0.0118972 Jy ! Component: 1700 - total flux cleaned = 0.0121234 Jy ! Component: 1750 - total flux cleaned = 0.0123478 Jy ! Component: 1800 - total flux cleaned = 0.0127943 Jy ! Component: 1850 - total flux cleaned = 0.0129421 Jy ! Component: 1900 - total flux cleaned = 0.0131258 Jy ! Component: 1950 - total flux cleaned = 0.0132355 Jy ! Component: 2000 - total flux cleaned = 0.0134903 Jy ! Component: 2050 - total flux cleaned = 0.0135985 Jy ! Component: 2100 - total flux cleaned = 0.0138503 Jy ! Component: 2150 - total flux cleaned = 0.0139935 Jy ! Component: 2200 - total flux cleaned = 0.0142071 Jy ! Component: 2250 - total flux cleaned = 0.014278 Jy ! Component: 2300 - total flux cleaned = 0.014384 Jy ! Component: 2350 - total flux cleaned = 0.0145947 Jy ! Component: 2400 - total flux cleaned = 0.0147343 Jy ! Component: 2450 - total flux cleaned = 0.014943 Jy ! Component: 2500 - total flux cleaned = 0.0149776 Jy ! Component: 2550 - total flux cleaned = 0.0152188 Jy ! Component: 2600 - total flux cleaned = 0.0152531 Jy ! Component: 2650 - total flux cleaned = 0.0153212 Jy ! Component: 2700 - total flux cleaned = 0.0154911 Jy ! Component: 2750 - total flux cleaned = 0.0155925 Jy ! Component: 2800 - total flux cleaned = 0.0157269 Jy ! Component: 2850 - total flux cleaned = 0.0157939 Jy ! Component: 2900 - total flux cleaned = 0.0159275 Jy ! Component: 2950 - total flux cleaned = 0.0159939 Jy ! Component: 3000 - total flux cleaned = 0.0160932 Jy ! Component: 3050 - total flux cleaned = 0.0161261 Jy ! Component: 3100 - total flux cleaned = 0.0160604 Jy ! Component: 3150 - total flux cleaned = 0.0161914 Jy ! Component: 3200 - total flux cleaned = 0.016289 Jy ! Component: 3250 - total flux cleaned = 0.0164185 Jy ! Component: 3300 - total flux cleaned = 0.016451 Jy ! Component: 3350 - total flux cleaned = 0.0165154 Jy ! Component: 3400 - total flux cleaned = 0.0164194 Jy ! Component: 3450 - total flux cleaned = 0.0165151 Jy ! Component: 3500 - total flux cleaned = 0.0166105 Jy ! Component: 3550 - total flux cleaned = 0.0166738 Jy ! Component: 3600 - total flux cleaned = 0.0167369 Jy ! Component: 3650 - total flux cleaned = 0.0167996 Jy ! Component: 3700 - total flux cleaned = 0.0168309 Jy ! Component: 3750 - total flux cleaned = 0.0168622 Jy ! Component: 3800 - total flux cleaned = 0.0168931 Jy ! Component: 3850 - total flux cleaned = 0.0168931 Jy ! Component: 3900 - total flux cleaned = 0.0169241 Jy ! Component: 3950 - total flux cleaned = 0.0170777 Jy ! Component: 4000 - total flux cleaned = 0.0170471 Jy ! Component: 4050 - total flux cleaned = 0.0170778 Jy ! Total flux subtracted in 4096 components = 0.0171386 Jy ! Clean residual min=-0.001815 max=0.001629 Jy/beam ! Clean residual mean=-0.000023 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.202867 Jy keep ! Adding 352 model components to the UV plane model. ! The established model now contains 475 components and 0.202867 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0654+4247_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.136 x 3.464 at 25.2 degrees (North through East) ! Clean map min=-0.0036139 max=0.10945 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0654+4247_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109453 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000521085 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42824 1.42824 2.85649 5.71298 11.426 22.8519 45.7038 91.4076 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.109 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 210.048 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0654+4247_S_uvs.log closed on Sat Dec 26 10:12:29 2015