! Started logfile: /scr/pima/gb073_uvs/J0555+3948_S_uvs.log on Sat Dec 26 10:12:05 2015 obs /scr/pima/gb073_uvs/J0555+3948_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0555+3948_S_uva.fits ! AN table 1: 11 integrations on 36 of 36 possible baselines. ! AN table 2: 12 integrations on 21 of 21 possible baselines. ! AN table 3: 12 integrations on 78 of 78 possible baselines. ! AN table 4: 12 integrations on 6 of 6 possible baselines. ! AN table 5: 12 integrations on 10 of 10 possible baselines. ! AN table 6: 12 integrations on 6 of 6 possible baselines. ! AN table 7: 12 integrations on 6 of 6 possible baselines. ! AN table 8: 12 integrations on 66 of 66 possible baselines. ! Apparent sampling: 0.890487 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 19320 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0555+3948_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 24 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 24 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 35 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 35 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 35 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 18 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 35 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 41 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! A total of 48 telescope corrections were flagged in sub-array 4. ! A total of 27 telescope corrections were flagged in sub-array 5. ! A total of 48 telescope corrections were flagged in sub-array 6. ! A total of 48 telescope corrections were flagged in sub-array 7. ! A total of 45 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 41 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 48 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 7. ! A total of 35 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=4.294178Jy sigma=11.539141 ! Fit after self-cal, rms=3.514321Jy sigma=6.625719 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.638 mas, bmaj=2.996 mas, bpa=-11.06 degrees ! Estimated noise=2.25877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.454 Jy ! Component: 100 - total flux cleaned = 2.01079 Jy ! Total flux subtracted in 100 components = 2.01079 Jy ! Clean residual min=-0.183217 max=0.263844 Jy/beam ! Clean residual mean=-0.000369 rms=0.047835 Jy/beam ! Combined flux in latest and established models = 2.01079 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.01079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.148116Jy sigma=5.917555 ! Fit after self-cal, rms=3.148105Jy sigma=5.917362 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.935 mas, bmaj=3.468 mas, bpa=-10.38 degrees ! Estimated noise=1.47172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.378226 Jy ! Component: 100 - total flux cleaned = 0.569341 Jy ! Component: 150 - total flux cleaned = 0.671622 Jy ! Component: 200 - total flux cleaned = 0.716876 Jy ! Total flux subtracted in 200 components = 0.716876 Jy ! Clean residual min=-0.202580 max=0.264874 Jy/beam ! Clean residual mean=-0.000752 rms=0.053419 Jy/beam ! Combined flux in latest and established models = 2.72767 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 2.72767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.046953Jy sigma=6.024923 ! Fit after self-cal, rms=3.047021Jy sigma=6.024819 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.935 x 3.468 at -10.38 degrees (North through East) ! Clean map min=-0.18637 max=2.0078 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.98 KP 0.94 LA 0.93 ! MK 0.84 NL 0.85 OV 0.91 PT 0.95 ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.98 KP 0.93 LA 0.92 ! MK 0.88 NL 0.92 OV 1.00* PT 0.92 ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* MC 0.00* ON 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! ! Fit before self-cal, rms=3.047021Jy sigma=6.024819 ! Fit after self-cal, rms=3.125925Jy sigma=6.040101 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.909 mas, bmaj=3.672 mas, bpa=-11.39 degrees ! Estimated noise=1.4803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046267 Jy ! Component: 100 - total flux cleaned = 0.0504368 Jy ! Component: 150 - total flux cleaned = 0.0491874 Jy ! Component: 200 - total flux cleaned = 0.0480357 Jy ! Total flux subtracted in 200 components = 0.0480357 Jy ! Clean residual min=-0.205739 max=0.256042 Jy/beam ! Clean residual mean=-0.000568 rms=0.054308 Jy/beam ! Combined flux in latest and established models = 2.77571 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 2.77571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.121199Jy sigma=6.068951 ! Fit after self-cal, rms=3.121212Jy sigma=6.068940 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.121212Jy sigma=6.068940 ! Fit after self-cal, rms=3.120752Jy sigma=6.063020 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.91 mas, bmaj=3.67 mas, bpa=-11.4 degrees ! Estimated noise=1.47876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.30503e-06 Jy ! Component: 100 - total flux cleaned = -0.00105458 Jy ! Component: 150 - total flux cleaned = -0.0020528 Jy ! Component: 200 - total flux cleaned = -0.00206472 Jy ! Total flux subtracted in 200 components = -0.00206472 Jy ! Clean residual min=-0.207456 max=0.253229 Jy/beam ! Clean residual mean=-0.000570 rms=0.054180 Jy/beam ! Combined flux in latest and established models = 2.77364 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 2.77364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.118874Jy sigma=6.068842 ! Fit after self-cal, rms=3.118877Jy sigma=6.068836 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250611 Jy ! Component: 100 - total flux cleaned = 0.376974 Jy ! Component: 150 - total flux cleaned = 0.423369 Jy ! Component: 200 - total flux cleaned = 0.451165 Jy ! Total flux subtracted in 200 components = 0.451165 Jy ! Clean residual min=-0.190967 max=0.251882 Jy/beam ! Clean residual mean=-0.000011 rms=0.047383 Jy/beam ! Combined flux in latest and established models = 3.22481 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 3.22481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.102363Jy sigma=5.520005 ! Fit after self-cal, rms=3.101156Jy sigma=5.489724 ! Inverting map ! Added new window around map position (26.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2091 Jy ! Component: 100 - total flux cleaned = 0.301945 Jy ! Component: 150 - total flux cleaned = 0.370634 Jy ! Component: 200 - total flux cleaned = 0.406276 Jy ! Total flux subtracted in 200 components = 0.406276 Jy ! Clean residual min=-0.178966 max=0.208179 Jy/beam ! Clean residual mean=0.000563 rms=0.042517 Jy/beam ! Combined flux in latest and established models = 3.63108 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 3.63108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.087440Jy sigma=5.056591 ! Fit after self-cal, rms=3.087237Jy sigma=5.032338 ! Inverting map ! Added new window around map position (-4.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143372 Jy ! Component: 100 - total flux cleaned = 0.188826 Jy ! Component: 150 - total flux cleaned = 0.211006 Jy ! Component: 200 - total flux cleaned = 0.22537 Jy ! Total flux subtracted in 200 components = 0.22537 Jy ! Clean residual min=-0.160450 max=0.194580 Jy/beam ! Clean residual mean=0.000845 rms=0.038703 Jy/beam ! Combined flux in latest and established models = 3.85645 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 82 components and 3.85645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.072288Jy sigma=4.694123 ! Fit after self-cal, rms=3.070840Jy sigma=4.681909 ! Inverting map ! Added new window around map position (56, 69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178754 Jy ! Component: 100 - total flux cleaned = 0.266638 Jy ! Component: 150 - total flux cleaned = 0.309245 Jy ! Component: 200 - total flux cleaned = 0.334251 Jy ! Total flux subtracted in 200 components = 0.334251 Jy ! Clean residual min=-0.155663 max=0.170807 Jy/beam ! Clean residual mean=0.000619 rms=0.035363 Jy/beam ! Combined flux in latest and established models = 4.1907 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 4.1907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.047359Jy sigma=4.377701 ! Fit after self-cal, rms=3.046471Jy sigma=4.357964 ! Inverting map ! Added new window around map position (5, 57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146817 Jy ! Component: 100 - total flux cleaned = 0.211684 Jy ! Component: 150 - total flux cleaned = 0.237422 Jy ! Component: 200 - total flux cleaned = 0.239699 Jy ! Total flux subtracted in 200 components = 0.239699 Jy ! Clean residual min=-0.131520 max=0.147731 Jy/beam ! Clean residual mean=0.000799 rms=0.032237 Jy/beam ! Combined flux in latest and established models = 4.4304 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 4.4304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.032000Jy sigma=4.136153 ! Fit after self-cal, rms=3.030605Jy sigma=4.125840 ! Inverting map ! Added new window around map position (-75.5, -38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120036 Jy ! Component: 100 - total flux cleaned = 0.141194 Jy ! Component: 150 - total flux cleaned = 0.141103 Jy ! Component: 200 - total flux cleaned = 0.130566 Jy ! Total flux subtracted in 200 components = 0.130566 Jy ! Clean residual min=-0.125504 max=0.133371 Jy/beam ! Clean residual mean=0.000601 rms=0.030302 Jy/beam ! Combined flux in latest and established models = 4.56097 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 4.56097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.014824Jy sigma=3.981685 ! Fit after self-cal, rms=3.013414Jy sigma=3.969838 ! Inverting map ! Added new window around map position (5.5, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130963 Jy ! Component: 100 - total flux cleaned = 0.172791 Jy ! Component: 150 - total flux cleaned = 0.184942 Jy ! Component: 200 - total flux cleaned = 0.189516 Jy ! Total flux subtracted in 200 components = 0.189516 Jy ! Clean residual min=-0.117606 max=0.121063 Jy/beam ! Clean residual mean=0.000735 rms=0.028880 Jy/beam ! Combined flux in latest and established models = 4.75048 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 154 components and 4.75048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.995400Jy sigma=3.796681 ! Fit after self-cal, rms=2.995370Jy sigma=3.788122 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.995370Jy sigma=3.788122 ! Fit after self-cal, rms=2.993867Jy sigma=3.750564 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.907 mas, bmaj=3.661 mas, bpa=-11.4 degrees ! Estimated noise=1.48392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0548061 Jy ! Component: 100 - total flux cleaned = 0.0849752 Jy ! Component: 150 - total flux cleaned = 0.100957 Jy ! Component: 200 - total flux cleaned = 0.112335 Jy ! Total flux subtracted in 200 components = 0.112335 Jy ! Clean residual min=-0.113574 max=0.117948 Jy/beam ! Clean residual mean=0.000606 rms=0.028305 Jy/beam ! Combined flux in latest and established models = 4.86282 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 168 components and 4.86282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.982191Jy sigma=3.723342 ! Fit after self-cal, rms=2.981948Jy sigma=3.722434 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132139 Jy ! Component: 100 - total flux cleaned = 0.0203718 Jy ! Component: 150 - total flux cleaned = 0.0221264 Jy ! Component: 200 - total flux cleaned = 0.027175 Jy ! Total flux subtracted in 200 components = 0.027175 Jy ! Clean residual min=-0.112452 max=0.114807 Jy/beam ! Clean residual mean=0.000602 rms=0.028025 Jy/beam ! Combined flux in latest and established models = 4.88999 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 182 components and 4.88999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.974940Jy sigma=3.692614 ! Fit after self-cal, rms=2.974636Jy sigma=3.692175 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.974636Jy sigma=3.692175 ! Fit after self-cal, rms=2.974737Jy sigma=3.691620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.145 mas, bmaj=12.36 mas, bpa=55.29 degrees ! Estimated noise=2.51656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0647876 Jy ! Component: 100 - total flux cleaned = 0.100966 Jy ! Component: 150 - total flux cleaned = 0.131811 Jy ! Component: 200 - total flux cleaned = 0.151434 Jy ! Total flux subtracted in 200 components = 0.151434 Jy ! Clean residual min=-0.210007 max=0.201586 Jy/beam ! Clean residual mean=0.001926 rms=0.058273 Jy/beam ! Combined flux in latest and established models = 5.04143 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 198 components and 5.04143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.973521Jy sigma=3.752749 ! Fit after self-cal, rms=2.972686Jy sigma=3.747102 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126522 Jy ! Component: 100 - total flux cleaned = 0.0186808 Jy ! Component: 150 - total flux cleaned = 0.0200263 Jy ! Component: 200 - total flux cleaned = 0.0212392 Jy ! Total flux subtracted in 200 components = 0.0212392 Jy ! Clean residual min=-0.208415 max=0.199306 Jy/beam ! Clean residual mean=0.001888 rms=0.057170 Jy/beam ! Combined flux in latest and established models = 5.06267 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 203 components and 5.06267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.971055Jy sigma=3.791283 ! Fit after self-cal, rms=2.970892Jy sigma=3.790222 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.906 mas, bmaj=3.66 mas, bpa=-11.4 degrees ! Estimated noise=1.48534 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.906 x 3.66 at -11.4 degrees (North through East) ! Clean map min=-0.12978 max=2.1684 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.970892Jy sigma=3.790222 ! Fit after self-cal, rms=2.970347Jy sigma=3.785133 ! Inverting map and beam ! Estimated beam: bmin=1.907 mas, bmaj=3.66 mas, bpa=-11.4 degrees ! Estimated noise=1.48412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0382406 Jy ! Component: 100 - total flux cleaned = -0.0593923 Jy ! Component: 150 - total flux cleaned = -0.0668402 Jy ! Component: 200 - total flux cleaned = -0.0667264 Jy ! Total flux subtracted in 200 components = -0.0667264 Jy ! Clean residual min=-0.117175 max=0.115277 Jy/beam ! Clean residual mean=0.000606 rms=0.027367 Jy/beam ! Combined flux in latest and established models = 4.99594 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 208 components and 4.99594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.966634Jy sigma=3.679995 ! Fit after self-cal, rms=2.966706Jy sigma=3.677854 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175881 Jy ! Component: 100 - total flux cleaned = -0.000195749 Jy ! Component: 150 - total flux cleaned = 0.00285863 Jy ! Component: 200 - total flux cleaned = 0.00136999 Jy ! Total flux subtracted in 200 components = 0.00136999 Jy ! Clean residual min=-0.114673 max=0.113268 Jy/beam ! Clean residual mean=0.000601 rms=0.027195 Jy/beam ! Combined flux in latest and established models = 4.99731 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 216 components and 4.99731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.961984Jy sigma=3.648450 ! Fit after self-cal, rms=2.961896Jy sigma=3.648139 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.961896Jy sigma=3.648139 ! Fit after self-cal, rms=2.961795Jy sigma=3.647835 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.618 mas, bmaj=3.166 mas, bpa=-12.17 degrees ! Estimated noise=2.28917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.43506 Jy ! Component: 100 - total flux cleaned = 1.99244 Jy ! Component: 150 - total flux cleaned = 2.34841 Jy ! Component: 200 - total flux cleaned = 2.64012 Jy ! Total flux subtracted in 200 components = 2.64012 Jy ! Clean residual min=-0.172786 max=0.231841 Jy/beam ! Clean residual mean=-0.000259 rms=0.042900 Jy/beam ! Combined flux in latest and established models = 2.64012 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 2.64012 Jy ! Inverting map and beam ! Estimated beam: bmin=1.907 mas, bmaj=3.661 mas, bpa=-11.4 degrees ! Estimated noise=1.48423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.309128 Jy ! Component: 100 - total flux cleaned = 0.560844 Jy ! Component: 150 - total flux cleaned = 0.776749 Jy ! Component: 200 - total flux cleaned = 0.958628 Jy ! Total flux subtracted in 200 components = 0.958628 Jy ! Clean residual min=-0.155933 max=0.189992 Jy/beam ! Clean residual mean=-0.000530 rms=0.038276 Jy/beam ! Combined flux in latest and established models = 3.59875 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 51 components and 3.59875 Jy ! Inverting map ! Added new window around map position (-33.5, 91). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16958 Jy ! Component: 100 - total flux cleaned = 0.293149 Jy ! Component: 150 - total flux cleaned = 0.410126 Jy ! Component: 200 - total flux cleaned = 0.511176 Jy ! Total flux subtracted in 200 components = 0.511176 Jy ! Clean residual min=-0.134845 max=0.152427 Jy/beam ! Clean residual mean=0.000046 rms=0.033737 Jy/beam ! Combined flux in latest and established models = 4.10993 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 63 components and 4.10993 Jy ! Inverting map ! Added new window around map position (75.5, 87.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138837 Jy ! Component: 100 - total flux cleaned = 0.222657 Jy ! Component: 150 - total flux cleaned = 0.299596 Jy ! Component: 200 - total flux cleaned = 0.370885 Jy ! Total flux subtracted in 200 components = 0.370885 Jy ! Clean residual min=-0.122745 max=0.133466 Jy/beam ! Clean residual mean=0.000111 rms=0.030799 Jy/beam ! Combined flux in latest and established models = 4.48081 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 78 components and 4.48081 Jy ! Inverting map ! Added new window around map position (-26.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118972 Jy ! Component: 100 - total flux cleaned = 0.189543 Jy ! Component: 150 - total flux cleaned = 0.248625 Jy ! Component: 200 - total flux cleaned = 0.304009 Jy ! Total flux subtracted in 200 components = 0.304009 Jy ! Clean residual min=-0.117368 max=0.117197 Jy/beam ! Clean residual mean=0.000408 rms=0.028394 Jy/beam ! Combined flux in latest and established models = 4.78482 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 100 components and 4.78482 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.15 mas, bmaj=12.36 mas, bpa=55.32 degrees ! Estimated noise=2.51317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132099 Jy ! Component: 100 - total flux cleaned = 0.233717 Jy ! Component: 150 - total flux cleaned = 0.316359 Jy ! Component: 200 - total flux cleaned = 0.385481 Jy ! Total flux subtracted in 200 components = 0.385481 Jy ! Clean residual min=-0.178695 max=0.187826 Jy/beam ! Clean residual mean=0.001986 rms=0.053173 Jy/beam ! Combined flux in latest and established models = 5.1703 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471923 Jy ! Component: 100 - total flux cleaned = 0.0823717 Jy ! Component: 150 - total flux cleaned = 0.104691 Jy ! Component: 200 - total flux cleaned = 0.125144 Jy ! Total flux subtracted in 200 components = 0.125144 Jy ! Clean residual min=-0.177316 max=0.178926 Jy/beam ! Clean residual mean=0.002172 rms=0.051229 Jy/beam ! Combined flux in latest and established models = 5.29545 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 137 components and 5.29545 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.907 mas, bmaj=3.661 mas, bpa=-11.4 degrees ! Estimated noise=1.48423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0571391 Jy ! Component: 100 - total flux cleaned = -0.074318 Jy ! Component: 150 - total flux cleaned = -0.0769244 Jy ! Component: 200 - total flux cleaned = -0.0745623 Jy ! Total flux subtracted in 200 components = -0.0745623 Jy ! Clean residual min=-0.118333 max=0.109016 Jy/beam ! Clean residual mean=0.000591 rms=0.027027 Jy/beam ! Combined flux in latest and established models = 5.22089 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 159 components and 5.22089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.949580Jy sigma=3.772666 ! Fit after self-cal, rms=2.946633Jy sigma=3.745207 wmodel /scr/pima/gb073_uvs/J0555+3948_S_map.mod ! Writing 159 model components to file: /scr/pima/gb073_uvs/J0555+3948_S_map.mod wobs /scr/pima/gb073_uvs/J0555+3948_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0555+3948_S_uvs.fits wwins /scr/pima/gb073_uvs/J0555+3948_S_map.win ! wwins: Wrote 11 windows to /scr/pima/gb073_uvs/J0555+3948_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113652 Jy ! Component: 100 - total flux cleaned = 0.00846439 Jy ! Component: 150 - total flux cleaned = 0.0230783 Jy ! Component: 200 - total flux cleaned = 0.0318011 Jy ! Component: 250 - total flux cleaned = 0.0436279 Jy ! Component: 300 - total flux cleaned = 0.0567373 Jy ! Component: 350 - total flux cleaned = 0.0694879 Jy ! Component: 400 - total flux cleaned = 0.0881095 Jy ! Component: 450 - total flux cleaned = 0.0987037 Jy ! Component: 500 - total flux cleaned = 0.117953 Jy ! Component: 550 - total flux cleaned = 0.136792 Jy ! Component: 600 - total flux cleaned = 0.153909 Jy ! Component: 650 - total flux cleaned = 0.172087 Jy ! Component: 700 - total flux cleaned = 0.191302 Jy ! Component: 750 - total flux cleaned = 0.208813 Jy ! Component: 800 - total flux cleaned = 0.227392 Jy ! Component: 850 - total flux cleaned = 0.241732 Jy ! Component: 900 - total flux cleaned = 0.255844 Jy ! Component: 950 - total flux cleaned = 0.272266 Jy ! Component: 1000 - total flux cleaned = 0.288408 Jy ! Component: 1050 - total flux cleaned = 0.303095 Jy ! Component: 1100 - total flux cleaned = 0.311547 Jy ! Component: 1150 - total flux cleaned = 0.323423 Jy ! Component: 1200 - total flux cleaned = 0.333996 Jy ! Component: 1250 - total flux cleaned = 0.346724 Jy ! Component: 1300 - total flux cleaned = 0.353579 Jy ! Component: 1350 - total flux cleaned = 0.367106 Jy ! Component: 1400 - total flux cleaned = 0.376013 Jy ! Component: 1450 - total flux cleaned = 0.385906 Jy ! Component: 1500 - total flux cleaned = 0.393516 Jy ! Component: 1550 - total flux cleaned = 0.405342 Jy ! Component: 1600 - total flux cleaned = 0.419109 Jy ! Component: 1650 - total flux cleaned = 0.427501 Jy ! Component: 1700 - total flux cleaned = 0.442002 Jy ! Component: 1750 - total flux cleaned = 0.451221 Jy ! Component: 1800 - total flux cleaned = 0.462376 Jy ! Component: 1850 - total flux cleaned = 0.472415 Jy ! Component: 1900 - total flux cleaned = 0.484322 Jy ! Component: 1950 - total flux cleaned = 0.495151 Jy ! Component: 2000 - total flux cleaned = 0.505879 Jy ! Component: 2050 - total flux cleaned = 0.519407 Jy ! Component: 2100 - total flux cleaned = 0.531839 Jy ! Component: 2150 - total flux cleaned = 0.543225 Jy ! Component: 2200 - total flux cleaned = 0.552625 Jy ! Component: 2250 - total flux cleaned = 0.564759 Jy ! Component: 2300 - total flux cleaned = 0.576773 Jy ! Component: 2350 - total flux cleaned = 0.586859 Jy ! Component: 2400 - total flux cleaned = 0.599602 Jy ! Component: 2450 - total flux cleaned = 0.608622 Jy ! Component: 2500 - total flux cleaned = 0.616693 Jy ! Component: 2550 - total flux cleaned = 0.62558 Jy ! Component: 2600 - total flux cleaned = 0.636165 Jy ! Component: 2650 - total flux cleaned = 0.643164 Jy ! Component: 2700 - total flux cleaned = 0.653584 Jy ! Component: 2750 - total flux cleaned = 0.659618 Jy ! Component: 2800 - total flux cleaned = 0.668167 Jy ! Component: 2850 - total flux cleaned = 0.676665 Jy ! Component: 2900 - total flux cleaned = 0.684263 Jy ! Component: 2950 - total flux cleaned = 0.693476 Jy ! Component: 3000 - total flux cleaned = 0.698466 Jy ! Component: 3050 - total flux cleaned = 0.710027 Jy ! Component: 3100 - total flux cleaned = 0.714956 Jy ! Component: 3150 - total flux cleaned = 0.722298 Jy ! Component: 3200 - total flux cleaned = 0.732001 Jy ! Component: 3250 - total flux cleaned = 0.739218 Jy ! Component: 3300 - total flux cleaned = 0.744006 Jy ! Component: 3350 - total flux cleaned = 0.752715 Jy ! Component: 3400 - total flux cleaned = 0.7598 Jy ! Component: 3450 - total flux cleaned = 0.764488 Jy ! Component: 3500 - total flux cleaned = 0.773809 Jy ! Component: 3550 - total flux cleaned = 0.781528 Jy ! Component: 3600 - total flux cleaned = 0.786892 Jy ! Component: 3650 - total flux cleaned = 0.795267 Jy ! Component: 3700 - total flux cleaned = 0.80056 Jy ! Component: 3750 - total flux cleaned = 0.811843 Jy ! Component: 3800 - total flux cleaned = 0.818563 Jy ! Component: 3850 - total flux cleaned = 0.821535 Jy ! Component: 3900 - total flux cleaned = 0.828916 Jy ! Component: 3950 - total flux cleaned = 0.836986 Jy ! Component: 4000 - total flux cleaned = 0.843548 Jy ! Component: 4050 - total flux cleaned = 0.849349 Jy ! Total flux subtracted in 4096 components = 0.859437 Jy ! Clean residual min=-0.035984 max=0.049059 Jy/beam ! Clean residual mean=0.000171 rms=0.012728 Jy/beam ! Combined flux in latest and established models = 6.08032 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 489 components and 6.08032 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0555+3948_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.907 x 3.661 at -11.4 degrees (North through East) ! Clean map min=-0.099274 max=2.2356 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0555+3948_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.23563 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0126914 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.70306 1.70306 3.40613 6.81225 13.6245 27.249 54.498 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.038 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.235 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 176.153 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0555+3948_S_uvs.log closed on Sat Dec 26 10:12:11 2015