! Started logfile: /scr/pima/gb073_uvs/J0457-2324_X_uvs.log on Sat Dec 26 09:32:48 2015 obs /scr/pima/gb073_uvs/J0457-2324_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0457-2324_X_uva.fits ! AN table 1: 12 integrations on 10 of 10 possible baselines. ! AN table 2: 5 integrations on 21 of 21 possible baselines. ! AN table 3: 5 integrations on 36 of 36 possible baselines. ! AN table 4: 6 integrations on 6 of 6 possible baselines. ! AN table 5: 5 integrations on 3 of 3 possible baselines. ! AN table 6: 5 integrations on 21 of 21 possible baselines. ! AN table 7: 5 integrations on 28 of 28 possible baselines. ! AN table 8: 5 integrations on 21 of 21 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0457-2324 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6448 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0457-2324_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 6. ! A total of 5 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 5 telescope corrections were flagged in sub-array 6. ! A total of 5 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=2.506771Jy sigma=23.049972 ! Fit after self-cal, rms=1.302034Jy sigma=12.136099 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.7412 mas, bmaj=1.169 mas, bpa=11.75 degrees ! Estimated noise=1.64448 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75496 Jy ! Component: 100 - total flux cleaned = 2.14771 Jy ! Total flux subtracted in 100 components = 2.14771 Jy ! Clean residual min=-0.056515 max=0.131646 Jy/beam ! Clean residual mean=-0.000002 rms=0.012062 Jy/beam ! Combined flux in latest and established models = 2.1477 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 2.1477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.351082Jy sigma=2.804304 ! Fit after self-cal, rms=0.351082Jy sigma=2.804295 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13019 Jy ! Component: 100 - total flux cleaned = 0.195663 Jy ! Total flux subtracted in 100 components = 0.195663 Jy ! Clean residual min=-0.052608 max=0.049630 Jy/beam ! Clean residual mean=-0.000007 rms=0.009136 Jy/beam ! Combined flux in latest and established models = 2.34337 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 2.34337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.290276Jy sigma=2.074524 ! Fit after self-cal, rms=0.290248Jy sigma=2.074347 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9241 mas, bmaj=1.451 mas, bpa=7.678 degrees ! Estimated noise=1.07916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466361 Jy ! Component: 100 - total flux cleaned = 0.0614233 Jy ! Component: 150 - total flux cleaned = 0.0635739 Jy ! Component: 200 - total flux cleaned = 0.0642106 Jy ! Total flux subtracted in 200 components = 0.0642106 Jy ! Clean residual min=-0.046404 max=0.039964 Jy/beam ! Clean residual mean=-0.000048 rms=0.009215 Jy/beam ! Combined flux in latest and established models = 2.40758 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 2.40758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.284674Jy sigma=2.005966 ! Fit after self-cal, rms=0.284569Jy sigma=2.005030 ! Inverting map ! Your choice of large map pixels excluded 3.85% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9241 x 1.451 at 7.678 degrees (North through East) ! Clean map min=-0.043136 max=2.2653 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HH 1.16 KP 1.00 LA 1.09 ! NL 1.09 PT 0.99 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.96 KP 0.97 LA 1.04 ! MK 0.99 NL 0.95 OV 1.02 PT 0.94 ! SC 0.97 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 0.96 KP 0.97 LA 1.06 ! NL 0.92 PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 0.95 KP 0.97 LA 1.05 ! MK 0.97 NL 0.95 PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.97 KP 0.99 LA 1.11 NL 1.01 ! OV 1.02 PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HH 1.13 KP 1.02 LA 1.12 ! NL 1.13 PT 1.04 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 KP 0.99 LA 1.06 ! MK 1.02 NL 0.97 OV 1.05 PT 0.99 ! SC 1.01 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.00 KP 0.98 LA 1.07 ! NL 0.96 PT 1.01 SC 0.99 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 FD 0.99 KP 0.99 LA 1.07 ! MK 1.00 NL 0.98 PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.02 KP 1.00 LA 1.12 NL 1.05 ! OV 1.05 PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HH 1.11 KP 0.94 LA 1.03 ! NL 1.12 PT 1.03 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 KP 0.93 LA 0.98 ! MK 0.98 NL 0.96 OV 1.02 PT 0.99 ! SC 1.03 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.97 KP 0.93 LA 1.00 ! NL 0.94 PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 FD 0.97 KP 0.92 LA 0.99 ! MK 0.96 NL 0.96 PT 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.99 KP 0.95 LA 1.05 NL 1.03 ! OV 1.01 PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HH 1.14 KP 0.98 LA 1.05 ! NL 1.14 PT 1.05 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 KP 0.96 LA 1.00 ! MK 0.99 NL 0.98 OV 1.03 PT 1.00 ! SC 1.04 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.99 KP 0.95 LA 1.02 ! NL 0.96 PT 1.02 SC 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 FD 0.99 KP 0.96 LA 1.01 ! MK 0.97 NL 0.99 PT 1.00 SC 1.01 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.02 KP 0.98 LA 1.07 NL 1.05 ! OV 1.02 PT 1.04 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HH 1.14 KP 0.90 LA 1.05 ! NL 1.17 PT 1.00 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00 KP 0.88 LA 1.00 ! MK 1.00 NL 1.00 OV 1.08 PT 0.98 ! SC 1.04 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 0.99 KP 0.88 LA 1.01 ! NL 0.99 PT 0.97 SC 1.03 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.98 KP 0.88 LA 1.00 ! MK 0.96 NL 1.01 PT 0.96 SC 1.02 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.02 KP 0.89 LA 1.07 NL 1.08 ! OV 1.06 PT 1.00 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HH 1.15 KP 0.86 LA 1.05 ! NL 1.18 PT 0.97 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00 KP 0.86 LA 0.99 ! MK 1.02 NL 1.00 OV 1.08 PT 0.93 ! SC 0.99 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 0.98 KP 0.86 LA 1.01 ! NL 0.98 PT 0.94 SC 0.97 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 0.99 KP 0.86 LA 1.00 ! MK 0.98 NL 1.00 PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.01 KP 0.87 LA 1.07 NL 1.08 ! OV 1.06 PT 0.97 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.04 KP 0.89 LA 1.04 ! MK 1.08 NL 1.03 OV 1.04 PT 0.99 ! SC 1.05 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.03 KP 0.89 LA 1.07 ! NL 1.01 PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 1.02 KP 0.87 LA 1.05 ! MK 1.05 NL 1.03 PT 0.98 SC 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.05 KP 0.90 LA 1.12 NL 1.11 ! OV 1.03 PT 1.03 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.03 KP 0.89 LA 1.04 ! MK 1.08 NL 1.02 OV 1.02 PT 1.00 ! SC 1.03 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.01 KP 0.89 LA 1.07 ! NL 1.00 PT 1.00 SC 1.02 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 FD 1.00 KP 0.89 LA 1.05 ! MK 1.05 NL 1.02 PT 0.99 SC 1.02 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.05 KP 0.92 LA 1.12 NL 1.09 ! OV 1.03 PT 1.02 SC 1.05 ! ! ! Fit before self-cal, rms=0.284569Jy sigma=2.005030 ! Fit after self-cal, rms=0.221794Jy sigma=1.265373 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9439 mas, bmaj=1.599 mas, bpa=3.479 degrees ! Estimated noise=1.08604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105353 Jy ! Component: 100 - total flux cleaned = -0.0100461 Jy ! Component: 150 - total flux cleaned = -0.0101225 Jy ! Component: 200 - total flux cleaned = -0.0100946 Jy ! Total flux subtracted in 200 components = -0.0100946 Jy ! Clean residual min=-0.025211 max=0.018392 Jy/beam ! Clean residual mean=0.000003 rms=0.004652 Jy/beam ! Combined flux in latest and established models = 2.39748 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 16 components and 2.39748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.219351Jy sigma=1.256670 ! Fit after self-cal, rms=0.219318Jy sigma=1.256138 ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.219318Jy sigma=1.256138 ! Fit after self-cal, rms=0.217486Jy sigma=1.244224 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9453 mas, bmaj=1.601 mas, bpa=3.245 degrees ! Estimated noise=1.08334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.010002 Jy ! Component: 100 - total flux cleaned = -0.00998483 Jy ! Component: 150 - total flux cleaned = -0.0104634 Jy ! Component: 200 - total flux cleaned = -0.0104984 Jy ! Total flux subtracted in 200 components = -0.0104984 Jy ! Clean residual min=-0.022736 max=0.017921 Jy/beam ! Clean residual mean=0.000003 rms=0.004468 Jy/beam ! Combined flux in latest and established models = 2.38699 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 16 components and 2.38699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.215618Jy sigma=1.238459 ! Fit after self-cal, rms=0.215596Jy sigma=1.238229 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473441 Jy ! Component: 100 - total flux cleaned = -0.000486392 Jy ! Component: 150 - total flux cleaned = -0.000920006 Jy ! Component: 200 - total flux cleaned = -0.000946463 Jy ! Total flux subtracted in 200 components = -0.000946463 Jy ! Clean residual min=-0.021805 max=0.017891 Jy/beam ! Clean residual mean=0.000002 rms=0.004428 Jy/beam ! Combined flux in latest and established models = 2.38604 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 17 components and 2.38604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.214765Jy sigma=1.235317 ! Fit after self-cal, rms=0.214749Jy sigma=1.235185 ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.214749Jy sigma=1.235185 ! Fit after self-cal, rms=0.214814Jy sigma=1.229980 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9468 mas, bmaj=1.603 mas, bpa=3.031 degrees ! Estimated noise=1.08075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00980429 Jy ! Component: 100 - total flux cleaned = -0.00982951 Jy ! Component: 150 - total flux cleaned = -0.010244 Jy ! Component: 200 - total flux cleaned = -0.0102647 Jy ! Total flux subtracted in 200 components = -0.0102647 Jy ! Clean residual min=-0.021115 max=0.017565 Jy/beam ! Clean residual mean=0.000003 rms=0.004357 Jy/beam ! Combined flux in latest and established models = 2.37577 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 17 components and 2.37577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213542Jy sigma=1.227193 ! Fit after self-cal, rms=0.213534Jy sigma=1.227127 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000380716 Jy ! Component: 100 - total flux cleaned = -0.000405232 Jy ! Component: 150 - total flux cleaned = -0.000791781 Jy ! Component: 200 - total flux cleaned = -0.00117067 Jy ! Total flux subtracted in 200 components = -0.00117067 Jy ! Clean residual min=-0.020296 max=0.017665 Jy/beam ! Clean residual mean=0.000003 rms=0.004330 Jy/beam ! Combined flux in latest and established models = 2.3746 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 17 components and 2.3746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213128Jy sigma=1.226399 ! Fit after self-cal, rms=0.213124Jy sigma=1.226374 ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.213124Jy sigma=1.226374 ! Fit after self-cal, rms=0.210099Jy sigma=1.207164 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=2.504 mas, bmaj=5.518 mas, bpa=-5.55 degrees ! Estimated noise=1.28535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00930024 Jy ! Component: 100 - total flux cleaned = -0.0100983 Jy ! Component: 150 - total flux cleaned = -0.0102249 Jy ! Component: 200 - total flux cleaned = -0.0103374 Jy ! Total flux subtracted in 200 components = -0.0103374 Jy ! Clean residual min=-0.016330 max=0.018032 Jy/beam ! Clean residual mean=0.000002 rms=0.005687 Jy/beam ! Combined flux in latest and established models = 2.36427 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 20 components and 2.36427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.209351Jy sigma=1.206721 ! Fit after self-cal, rms=0.209299Jy sigma=1.205803 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184161 Jy ! Component: 100 - total flux cleaned = 5.47719e-05 Jy ! Component: 150 - total flux cleaned = -5.26443e-05 Jy ! Component: 200 - total flux cleaned = -0.000151411 Jy ! Total flux subtracted in 200 components = -0.000151411 Jy ! Clean residual min=-0.016354 max=0.017940 Jy/beam ! Clean residual mean=0.000003 rms=0.005683 Jy/beam ! Combined flux in latest and established models = 2.36411 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 2.36411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.209238Jy sigma=1.206496 ! Fit after self-cal, rms=0.209196Jy sigma=1.205967 ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9485 mas, bmaj=1.605 mas, bpa=2.837 degrees ! Estimated noise=1.07758 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9485 x 1.605 at 2.837 degrees (North through East) ! Clean map min=-0.018843 max=2.2698 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.209196Jy sigma=1.205967 ! Fit after self-cal, rms=0.203336Jy sigma=1.156990 ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9507 mas, bmaj=1.604 mas, bpa=2.726 degrees ! Estimated noise=1.0754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00986085 Jy ! Component: 100 - total flux cleaned = -0.0102033 Jy ! Component: 150 - total flux cleaned = -0.0102294 Jy ! Component: 200 - total flux cleaned = -0.0105472 Jy ! Total flux subtracted in 200 components = -0.0105472 Jy ! Clean residual min=-0.017110 max=0.015758 Jy/beam ! Clean residual mean=0.000004 rms=0.003978 Jy/beam ! Combined flux in latest and established models = 2.35357 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 22 components and 2.35357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.202143Jy sigma=1.154948 ! Fit after self-cal, rms=0.202125Jy sigma=1.154826 ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351303 Jy ! Component: 100 - total flux cleaned = -0.000357522 Jy ! Component: 150 - total flux cleaned = -0.000625764 Jy ! Component: 200 - total flux cleaned = -0.000643906 Jy ! Total flux subtracted in 200 components = -0.000643906 Jy ! Clean residual min=-0.017205 max=0.015805 Jy/beam ! Clean residual mean=0.000004 rms=0.003962 Jy/beam ! Combined flux in latest and established models = 2.35292 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 2.35292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.201784Jy sigma=1.154226 ! Fit after self-cal, rms=0.201776Jy sigma=1.154164 ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.201776Jy sigma=1.154164 ! Fit after self-cal, rms=0.199149Jy sigma=1.136492 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.7707 mas, bmaj=1.293 mas, bpa=4.423 degrees ! Estimated noise=1.64451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75064 Jy ! Component: 100 - total flux cleaned = 2.13273 Jy ! Component: 150 - total flux cleaned = 2.24552 Jy ! Component: 200 - total flux cleaned = 2.30482 Jy ! Total flux subtracted in 200 components = 2.30482 Jy ! Clean residual min=-0.029085 max=0.031981 Jy/beam ! Clean residual mean=0.000010 rms=0.005657 Jy/beam ! Combined flux in latest and established models = 2.30482 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.30482 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9525 mas, bmaj=1.604 mas, bpa=2.64 degrees ! Estimated noise=1.0724 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355651 Jy ! Component: 100 - total flux cleaned = 0.0391369 Jy ! Component: 150 - total flux cleaned = 0.0399009 Jy ! Component: 200 - total flux cleaned = 0.0406269 Jy ! Total flux subtracted in 200 components = 0.0406269 Jy ! Clean residual min=-0.019606 max=0.017293 Jy/beam ! Clean residual mean=0.000010 rms=0.004263 Jy/beam ! Combined flux in latest and established models = 2.34545 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 2.34545 Jy ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=2.506 mas, bmaj=5.528 mas, bpa=-5.62 degrees ! Estimated noise=1.27516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00899061 Jy ! Component: 100 - total flux cleaned = 0.00999091 Jy ! Component: 150 - total flux cleaned = 0.00999137 Jy ! Component: 200 - total flux cleaned = 0.00982506 Jy ! Total flux subtracted in 200 components = 0.00982506 Jy ! Clean residual min=-0.015607 max=0.016529 Jy/beam ! Clean residual mean=0.000023 rms=0.005418 Jy/beam ! Combined flux in latest and established models = 2.35527 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.36384e-06 Jy ! Component: 100 - total flux cleaned = -5.04374e-06 Jy ! Component: 150 - total flux cleaned = -0.000144293 Jy ! Component: 200 - total flux cleaned = -0.000142701 Jy ! Total flux subtracted in 200 components = -0.000142701 Jy ! Clean residual min=-0.015635 max=0.016215 Jy/beam ! Clean residual mean=0.000023 rms=0.005409 Jy/beam ! Combined flux in latest and established models = 2.35513 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 2.35513 Jy ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! Estimated beam: bmin=0.9525 mas, bmaj=1.604 mas, bpa=2.64 degrees ! Estimated noise=1.0724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240104 Jy ! Component: 100 - total flux cleaned = -0.00171703 Jy ! Component: 150 - total flux cleaned = -0.00174889 Jy ! Component: 200 - total flux cleaned = -0.00177049 Jy ! Total flux subtracted in 200 components = -0.00177049 Jy ! Clean residual min=-0.018209 max=0.015591 Jy/beam ! Clean residual mean=0.000015 rms=0.004025 Jy/beam ! Combined flux in latest and established models = 2.35336 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 2.35336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.209311Jy sigma=1.205350 ! Fit after self-cal, rms=0.208868Jy sigma=1.202018 wmodel /scr/pima/gb073_uvs/J0457-2324_X_map.mod ! Writing 46 model components to file: /scr/pima/gb073_uvs/J0457-2324_X_map.mod wobs /scr/pima/gb073_uvs/J0457-2324_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0457-2324_X_uvs.fits wwins /scr/pima/gb073_uvs/J0457-2324_X_map.win ! wwins: Wrote 2 windows to /scr/pima/gb073_uvs/J0457-2324_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00829322 Jy ! Component: 100 - total flux cleaned = -0.0147293 Jy ! Component: 150 - total flux cleaned = -0.0206226 Jy ! Component: 200 - total flux cleaned = -0.0263396 Jy ! Component: 250 - total flux cleaned = -0.0316254 Jy ! Component: 300 - total flux cleaned = -0.0367728 Jy ! Component: 350 - total flux cleaned = -0.0415306 Jy ! Component: 400 - total flux cleaned = -0.0454156 Jy ! Component: 450 - total flux cleaned = -0.0489849 Jy ! Component: 500 - total flux cleaned = -0.0524963 Jy ! Component: 550 - total flux cleaned = -0.0554582 Jy ! Component: 600 - total flux cleaned = -0.0583777 Jy ! Component: 650 - total flux cleaned = -0.0617356 Jy ! Component: 700 - total flux cleaned = -0.064574 Jy ! Component: 750 - total flux cleaned = -0.0676119 Jy ! Component: 800 - total flux cleaned = -0.0701523 Jy ! Component: 850 - total flux cleaned = -0.0733451 Jy ! Component: 900 - total flux cleaned = -0.0756019 Jy ! Component: 950 - total flux cleaned = -0.0787269 Jy ! Component: 1000 - total flux cleaned = -0.0815946 Jy ! Component: 1050 - total flux cleaned = -0.0837779 Jy ! Component: 1100 - total flux cleaned = -0.0874474 Jy ! Component: 1150 - total flux cleaned = -0.0897954 Jy ! Component: 1200 - total flux cleaned = -0.0921256 Jy ! Component: 1250 - total flux cleaned = -0.0948511 Jy ! Component: 1300 - total flux cleaned = -0.0973438 Jy ! Component: 1350 - total flux cleaned = -0.100017 Jy ! Component: 1400 - total flux cleaned = -0.103073 Jy ! Component: 1450 - total flux cleaned = -0.104889 Jy ! Component: 1500 - total flux cleaned = -0.107893 Jy ! Component: 1550 - total flux cleaned = -0.110076 Jy ! Component: 1600 - total flux cleaned = -0.112834 Jy ! Component: 1650 - total flux cleaned = -0.115375 Jy ! Component: 1700 - total flux cleaned = -0.117891 Jy ! Component: 1750 - total flux cleaned = -0.120198 Jy ! Component: 1800 - total flux cleaned = -0.122298 Jy ! Component: 1850 - total flux cleaned = -0.125517 Jy ! Component: 1900 - total flux cleaned = -0.127584 Jy ! Component: 1950 - total flux cleaned = -0.130198 Jy ! Component: 2000 - total flux cleaned = -0.133162 Jy ! Component: 2050 - total flux cleaned = -0.135371 Jy ! Component: 2100 - total flux cleaned = -0.138294 Jy ! Component: 2150 - total flux cleaned = -0.1412 Jy ! Component: 2200 - total flux cleaned = -0.143367 Jy ! Component: 2250 - total flux cleaned = -0.146235 Jy ! Component: 2300 - total flux cleaned = -0.149618 Jy ! Component: 2350 - total flux cleaned = -0.152094 Jy ! Component: 2400 - total flux cleaned = -0.154555 Jy ! Component: 2450 - total flux cleaned = -0.157876 Jy ! Component: 2500 - total flux cleaned = -0.160133 Jy ! Component: 2550 - total flux cleaned = -0.162376 Jy ! Component: 2600 - total flux cleaned = -0.16495 Jy ! Component: 2650 - total flux cleaned = -0.167679 Jy ! Component: 2700 - total flux cleaned = -0.169715 Jy ! Component: 2750 - total flux cleaned = -0.172917 Jy ! Component: 2800 - total flux cleaned = -0.174928 Jy ! Component: 2850 - total flux cleaned = -0.176929 Jy ! Component: 2900 - total flux cleaned = -0.17991 Jy ! Component: 2950 - total flux cleaned = -0.182214 Jy ! Component: 3000 - total flux cleaned = -0.184508 Jy ! Component: 3050 - total flux cleaned = -0.187113 Jy ! Component: 3100 - total flux cleaned = -0.189381 Jy ! Component: 3150 - total flux cleaned = -0.191795 Jy ! Component: 3200 - total flux cleaned = -0.194197 Jy ! Component: 3250 - total flux cleaned = -0.196107 Jy ! Component: 3300 - total flux cleaned = -0.198799 Jy ! Component: 3350 - total flux cleaned = -0.201476 Jy ! Component: 3400 - total flux cleaned = -0.203667 Jy ! Component: 3450 - total flux cleaned = -0.206158 Jy ! Component: 3500 - total flux cleaned = -0.208171 Jy ! Component: 3550 - total flux cleaned = -0.210328 Jy ! Component: 3600 - total flux cleaned = -0.212933 Jy ! Component: 3650 - total flux cleaned = -0.214764 Jy ! Component: 3700 - total flux cleaned = -0.217039 Jy ! Component: 3750 - total flux cleaned = -0.219152 Jy ! Component: 3800 - total flux cleaned = -0.221403 Jy ! Component: 3850 - total flux cleaned = -0.22409 Jy ! Component: 3900 - total flux cleaned = -0.225871 Jy ! Component: 3950 - total flux cleaned = -0.227792 Jy ! Component: 4000 - total flux cleaned = -0.230144 Jy ! Component: 4050 - total flux cleaned = -0.231898 Jy ! Total flux subtracted in 4096 components = -0.233935 Jy ! Clean residual min=-0.011385 max=0.007799 Jy/beam ! Clean residual mean=0.000022 rms=0.002612 Jy/beam ! Combined flux in latest and established models = 2.11942 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 342 components and 2.11942 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0457-2324_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9525 x 1.604 at 2.64 degrees (North through East) ! Clean map min=-0.015834 max=2.2411 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0457-2324_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.24111 invert ! Inverting map ! Your choice of large map pixels excluded 3.31% of the data. ! The x-axis pixel size should ideally be below 0.1664 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00257811 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.345111 0.345111 0.690221 1.38044 2.76088 5.52177 11.0435 22.0871 44.1741 88.3483 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0077 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.241 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 869.286 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0457-2324_X_uvs.log closed on Sat Dec 26 09:32:52 2015