! Started logfile: /scr/pima/gb073_uvs/J0457-2324_S_uvs.log on Sat Dec 26 10:12:00 2015 obs /scr/pima/gb073_uvs/J0457-2324_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0457-2324_S_uva.fits ! AN table 1: 24 integrations on 10 of 10 possible baselines. ! AN table 2: 11 integrations on 21 of 21 possible baselines. ! AN table 3: 11 integrations on 36 of 36 possible baselines. ! AN table 4: 12 integrations on 6 of 6 possible baselines. ! AN table 5: 11 integrations on 3 of 3 possible baselines. ! AN table 6: 11 integrations on 21 of 21 possible baselines. ! AN table 7: 11 integrations on 28 of 28 possible baselines. ! AN table 8: 11 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.959816 visibilities/baseline/integration-bin. ! Found source: J0457-2324 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 13376 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0457-2324_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 7 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 7 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 7 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 7 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! A total of 11 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! A total of 15 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 17 telescope corrections were flagged in sub-array 6. ! A total of 11 telescope corrections were flagged in sub-array 7. ! A total of 11 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 120 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 7 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 8. ! A total of 120 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 7 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.655675Jy sigma=8.913976 ! Fit after self-cal, rms=0.555837Jy sigma=2.685007 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=3.773 mas, bpa=23.09 degrees ! Estimated noise=2.07395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.861321 Jy ! Component: 100 - total flux cleaned = 1.12074 Jy ! Total flux subtracted in 100 components = 1.12074 Jy ! Clean residual min=-0.040936 max=0.100713 Jy/beam ! Clean residual mean=0.000243 rms=0.011570 Jy/beam ! Combined flux in latest and established models = 1.12074 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.12074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.502629Jy sigma=2.031764 ! Fit after self-cal, rms=0.502559Jy sigma=2.031196 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107562 Jy ! Component: 100 - total flux cleaned = 0.162528 Jy ! Total flux subtracted in 100 components = 0.162528 Jy ! Clean residual min=-0.032024 max=0.033655 Jy/beam ! Clean residual mean=0.000163 rms=0.008188 Jy/beam ! Combined flux in latest and established models = 1.28327 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 1.28327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.470779Jy sigma=1.891276 ! Fit after self-cal, rms=0.470947Jy sigma=1.891102 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=4.712 mas, bpa=22.3 degrees ! Estimated noise=1.30975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884578 Jy ! Component: 100 - total flux cleaned = 0.00943963 Jy ! Component: 150 - total flux cleaned = 0.00944846 Jy ! Component: 200 - total flux cleaned = 0.00921218 Jy ! Total flux subtracted in 200 components = 0.00921218 Jy ! Clean residual min=-0.054715 max=0.052113 Jy/beam ! Clean residual mean=0.000637 rms=0.016180 Jy/beam ! Combined flux in latest and established models = 1.29248 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 28 components and 1.29248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.470553Jy sigma=1.883933 ! Fit after self-cal, rms=0.470628Jy sigma=1.883833 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.91 x 4.712 at 22.3 degrees (North through East) ! Clean map min=-0.053682 max=1.1009 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HH 1.10 KP 1.04 LA 0.97 ! NL 1.04 PT 1.02 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.95 KP 0.99 LA 0.97 ! MK 1.03 NL 0.95 OV 1.00 PT 1.00 ! SC 1.05 ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 0.95 KP 1.01 LA 0.98 ! NL 0.90 PT 1.00 SC 1.01 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.91 FD 0.94 KP 0.99 LA 0.99 ! MK 1.08 NL 0.93 PT 1.01 SC 1.01 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.96 KP 0.98 LA 1.00 NL 0.97 ! OV 0.98 PT 1.02 SC 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.96 KP 1.01 LA 1.07 ! MK 0.99 NL 1.01 OV 0.96 PT 1.02 ! SC 1.10 ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.92 FD 0.95 KP 1.01 LA 1.06 ! NL 0.99 PT 1.02 SC 1.10 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.94 FD 0.95 KP 1.02 LA 1.04 ! MK 1.01 NL 1.00 PT 1.03 SC 1.07 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.94 KP 1.04 LA 1.08 NL 1.07 ! OV 0.94 PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 KP 1.01 LA 1.00 ! MK 1.07 NL 0.98 OV 1.00* PT 0.99 ! SC 1.13 ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.00 KP 1.01 LA 0.99 ! NL 0.99 PT 0.97 SC 1.10 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.98 FD 1.00 KP 0.97 LA 1.00 ! MK 1.15 NL 0.99 PT 0.98 SC 1.11 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.01 KP 0.99 LA 0.99 NL 1.06 ! OV 1.00* PT 0.97 SC 1.08 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HH 1.12 KP 1.01 LA 1.02 ! NL 1.16 PT 1.03 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 KP 1.00 LA 1.01 ! MK 1.01 NL 1.03 OV 1.00* PT 1.00 ! SC 1.10 ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 0.99 KP 1.01 LA 0.98 ! NL 1.02 PT 0.99 SC 1.10 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 0.99 KP 0.98 LA 0.98 ! MK 1.06 NL 1.02 PT 0.99 SC 1.10 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00 KP 0.99 LA 0.99 NL 1.09 ! OV 1.00* PT 1.01 SC 1.08 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* KP 1.00* LA 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HH 0.91 KP 0.88 LA 0.99 ! NL 1.18 PT 1.00* SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.99 KP 0.85 LA 0.98 ! MK 1.01 NL 1.09 OV 1.00 PT 1.00* ! SC 1.04 ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 0.99 KP 0.85 LA 0.97 ! NL 1.08 PT 1.00* SC 1.01 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 0.99 KP 0.85 LA 0.95 ! MK 1.04 NL 1.09 PT 1.00* SC 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00 KP 0.84 LA 1.00 NL 1.15 ! OV 1.03 PT 1.00* SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* KP 1.00* LA 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00* HH 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 30 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FD 0.00* HH 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00* KP 1.00* LA 1.00* NL 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.470628Jy sigma=1.883833 ! Fit after self-cal, rms=0.464186Jy sigma=1.675575 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=5.054 mas, bpa=16.42 degrees ! Estimated noise=1.34453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571241 Jy ! Component: 100 - total flux cleaned = 0.00514391 Jy ! Component: 150 - total flux cleaned = 0.00489767 Jy ! Component: 200 - total flux cleaned = 0.00467385 Jy ! Total flux subtracted in 200 components = 0.00467385 Jy ! Clean residual min=-0.043690 max=0.051444 Jy/beam ! Clean residual mean=0.000505 rms=0.013957 Jy/beam ! Combined flux in latest and established models = 1.29716 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 1.29716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.463460Jy sigma=1.672741 ! Fit after self-cal, rms=0.463522Jy sigma=1.672694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.463522Jy sigma=1.672694 ! Fit after self-cal, rms=0.463702Jy sigma=1.672151 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=5.049 mas, bpa=16.5 degrees ! Estimated noise=1.35003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030649 Jy ! Component: 100 - total flux cleaned = 0.00309008 Jy ! Component: 150 - total flux cleaned = 0.00285392 Jy ! Component: 200 - total flux cleaned = 0.00265338 Jy ! Total flux subtracted in 200 components = 0.00265338 Jy ! Clean residual min=-0.044079 max=0.051406 Jy/beam ! Clean residual mean=0.000510 rms=0.014032 Jy/beam ! Combined flux in latest and established models = 1.29981 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 1.29981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.463105Jy sigma=1.671168 ! Fit after self-cal, rms=0.463122Jy sigma=1.671157 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388206 Jy ! Component: 100 - total flux cleaned = -0.000552749 Jy ! Component: 150 - total flux cleaned = -0.000715892 Jy ! Component: 200 - total flux cleaned = -0.000873944 Jy ! Total flux subtracted in 200 components = -0.000873944 Jy ! Clean residual min=-0.044204 max=0.051170 Jy/beam ! Clean residual mean=0.000510 rms=0.014015 Jy/beam ! Combined flux in latest and established models = 1.29893 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 1.29893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.463010Jy sigma=1.669967 ! Fit after self-cal, rms=0.463015Jy sigma=1.669951 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.463015Jy sigma=1.669951 ! Fit after self-cal, rms=0.462745Jy sigma=1.667988 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=5.047 mas, bpa=16.59 degrees ! Estimated noise=1.35495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166706 Jy ! Component: 100 - total flux cleaned = 0.0014544 Jy ! Component: 150 - total flux cleaned = 0.0012807 Jy ! Component: 200 - total flux cleaned = 0.00111181 Jy ! Total flux subtracted in 200 components = 0.00111181 Jy ! Clean residual min=-0.044390 max=0.050980 Jy/beam ! Clean residual mean=0.000493 rms=0.014059 Jy/beam ! Combined flux in latest and established models = 1.30005 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 37 components and 1.30005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.462343Jy sigma=1.667459 ! Fit after self-cal, rms=0.462354Jy sigma=1.667449 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328622 Jy ! Component: 100 - total flux cleaned = -0.000623427 Jy ! Component: 150 - total flux cleaned = -0.000763037 Jy ! Component: 200 - total flux cleaned = -0.000897579 Jy ! Total flux subtracted in 200 components = -0.000897579 Jy ! Clean residual min=-0.044433 max=0.050831 Jy/beam ! Clean residual mean=0.000493 rms=0.014046 Jy/beam ! Combined flux in latest and established models = 1.29915 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 1.29915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.462249Jy sigma=1.666849 ! Fit after self-cal, rms=0.462247Jy sigma=1.666837 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.462247Jy sigma=1.666837 ! Fit after self-cal, rms=0.462424Jy sigma=1.665939 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.363 mas, bmaj=19.16 mas, bpa=-4.276 degrees ! Estimated noise=1.63454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00641382 Jy ! Component: 100 - total flux cleaned = -0.00641951 Jy ! Component: 150 - total flux cleaned = -0.00641785 Jy ! Component: 200 - total flux cleaned = -0.00641471 Jy ! Total flux subtracted in 200 components = -0.00641471 Jy ! Clean residual min=-0.073858 max=0.084470 Jy/beam ! Clean residual mean=0.000921 rms=0.024987 Jy/beam ! Combined flux in latest and established models = 1.29273 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 39 components and 1.29273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.462455Jy sigma=1.668430 ! Fit after self-cal, rms=0.462381Jy sigma=1.668078 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115596 Jy ! Component: 100 - total flux cleaned = -0.00115526 Jy ! Component: 150 - total flux cleaned = -0.00115831 Jy ! Component: 200 - total flux cleaned = -0.00116155 Jy ! Total flux subtracted in 200 components = -0.00116155 Jy ! Clean residual min=-0.073783 max=0.084661 Jy/beam ! Clean residual mean=0.000921 rms=0.024960 Jy/beam ! Combined flux in latest and established models = 1.29157 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 39 components and 1.29157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.462028Jy sigma=1.672886 ! Fit after self-cal, rms=0.461980Jy sigma=1.672693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.078 mas, bmaj=5.047 mas, bpa=16.48 degrees ! Estimated noise=1.35975 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.078 x 5.047 at 16.48 degrees (North through East) ! Clean map min=-0.044376 max=1.1697 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.461980Jy sigma=1.672693 ! Fit after self-cal, rms=0.460143Jy sigma=1.652040 ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=5.063 mas, bpa=16.81 degrees ! Estimated noise=1.36249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314166 Jy ! Component: 100 - total flux cleaned = 0.00294045 Jy ! Component: 150 - total flux cleaned = 0.00310407 Jy ! Component: 200 - total flux cleaned = 0.00310977 Jy ! Total flux subtracted in 200 components = 0.00310977 Jy ! Clean residual min=-0.044225 max=0.050904 Jy/beam ! Clean residual mean=0.000493 rms=0.014050 Jy/beam ! Combined flux in latest and established models = 1.29468 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 1.29468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.459930Jy sigma=1.648383 ! Fit after self-cal, rms=0.459992Jy sigma=1.648372 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184778 Jy ! Component: 100 - total flux cleaned = 0.000166464 Jy ! Component: 150 - total flux cleaned = 2.97094e-05 Jy ! Component: 200 - total flux cleaned = 3.09553e-05 Jy ! Total flux subtracted in 200 components = 3.09553e-05 Jy ! Clean residual min=-0.044182 max=0.050772 Jy/beam ! Clean residual mean=0.000493 rms=0.014038 Jy/beam ! Combined flux in latest and established models = 1.29471 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 1.29471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.460046Jy sigma=1.646259 ! Fit after self-cal, rms=0.460066Jy sigma=1.646253 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.460066Jy sigma=1.646253 ! Fit after self-cal, rms=0.460216Jy sigma=1.645205 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.25 mas, bmaj=3.86 mas, bpa=19.51 degrees ! Estimated noise=2.14912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.901821 Jy ! Component: 100 - total flux cleaned = 1.16575 Jy ! Component: 150 - total flux cleaned = 1.26547 Jy ! Component: 200 - total flux cleaned = 1.31214 Jy ! Total flux subtracted in 200 components = 1.31214 Jy ! Clean residual min=-0.028845 max=0.031547 Jy/beam ! Clean residual mean=0.000108 rms=0.007094 Jy/beam ! Combined flux in latest and established models = 1.31214 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.31214 Jy ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=5.057 mas, bpa=16.64 degrees ! Estimated noise=1.3653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00820684 Jy ! Component: 100 - total flux cleaned = -0.00896035 Jy ! Component: 150 - total flux cleaned = -0.00927786 Jy ! Component: 200 - total flux cleaned = -0.00926492 Jy ! Total flux subtracted in 200 components = -0.00926492 Jy ! Clean residual min=-0.044334 max=0.052015 Jy/beam ! Clean residual mean=0.000493 rms=0.014235 Jy/beam ! Combined flux in latest and established models = 1.30288 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 1.30288 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.393 mas, bmaj=19.21 mas, bpa=-4.27 degrees ! Estimated noise=1.63394 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0109751 Jy ! Component: 100 - total flux cleaned = -0.0109687 Jy ! Component: 150 - total flux cleaned = -0.0109706 Jy ! Component: 200 - total flux cleaned = -0.0111293 Jy ! Total flux subtracted in 200 components = -0.0111293 Jy ! Clean residual min=-0.073504 max=0.083930 Jy/beam ! Clean residual mean=0.000918 rms=0.024921 Jy/beam ! Combined flux in latest and established models = 1.29175 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014647 Jy ! Component: 100 - total flux cleaned = -0.00028906 Jy ! Component: 150 - total flux cleaned = -0.000427839 Jy ! Component: 200 - total flux cleaned = -0.000557321 Jy ! Total flux subtracted in 200 components = -0.000557321 Jy ! Clean residual min=-0.073397 max=0.083971 Jy/beam ! Clean residual mean=0.000917 rms=0.024906 Jy/beam ! Combined flux in latest and established models = 1.29119 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 23 components and 1.29119 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=5.057 mas, bpa=16.64 degrees ! Estimated noise=1.3653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00910672 Jy ! Component: 100 - total flux cleaned = 0.0088448 Jy ! Component: 150 - total flux cleaned = 0.00859513 Jy ! Component: 200 - total flux cleaned = 0.00836743 Jy ! Total flux subtracted in 200 components = 0.00836743 Jy ! Clean residual min=-0.044376 max=0.051958 Jy/beam ! Clean residual mean=0.000494 rms=0.014184 Jy/beam ! Combined flux in latest and established models = 1.29956 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 1.29956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.460126Jy sigma=1.658692 ! Fit after self-cal, rms=0.460040Jy sigma=1.658583 wmodel /scr/pima/gb073_uvs/J0457-2324_S_map.mod ! Writing 30 model components to file: /scr/pima/gb073_uvs/J0457-2324_S_map.mod wobs /scr/pima/gb073_uvs/J0457-2324_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0457-2324_S_uvs.fits wwins /scr/pima/gb073_uvs/J0457-2324_S_map.win ! wwins: Wrote 1 windows to /scr/pima/gb073_uvs/J0457-2324_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236815 Jy ! Component: 100 - total flux cleaned = 0.0346236 Jy ! Component: 150 - total flux cleaned = 0.0391387 Jy ! Component: 200 - total flux cleaned = 0.043442 Jy ! Component: 250 - total flux cleaned = 0.0468543 Jy ! Component: 300 - total flux cleaned = 0.0507951 Jy ! Component: 350 - total flux cleaned = 0.0552103 Jy ! Component: 400 - total flux cleaned = 0.0594399 Jy ! Component: 450 - total flux cleaned = 0.0635139 Jy ! Component: 500 - total flux cleaned = 0.0674548 Jy ! Component: 550 - total flux cleaned = 0.0707496 Jy ! Component: 600 - total flux cleaned = 0.0760645 Jy ! Component: 650 - total flux cleaned = 0.0817374 Jy ! Component: 700 - total flux cleaned = 0.08725 Jy ! Component: 750 - total flux cleaned = 0.0916383 Jy ! Component: 800 - total flux cleaned = 0.0949488 Jy ! Component: 850 - total flux cleaned = 0.0972683 Jy ! Component: 900 - total flux cleaned = 0.101798 Jy ! Component: 950 - total flux cleaned = 0.104897 Jy ! Component: 1000 - total flux cleaned = 0.107933 Jy ! Component: 1050 - total flux cleaned = 0.11091 Jy ! Component: 1100 - total flux cleaned = 0.113827 Jy ! Component: 1150 - total flux cleaned = 0.117497 Jy ! Component: 1200 - total flux cleaned = 0.119105 Jy ! Component: 1250 - total flux cleaned = 0.121865 Jy ! Component: 1300 - total flux cleaned = 0.123799 Jy ! Component: 1350 - total flux cleaned = 0.125699 Jy ! Component: 1400 - total flux cleaned = 0.126443 Jy ! Component: 1450 - total flux cleaned = 0.127924 Jy ! Component: 1500 - total flux cleaned = 0.129377 Jy ! Component: 1550 - total flux cleaned = 0.130094 Jy ! Component: 1600 - total flux cleaned = 0.131156 Jy ! Component: 1650 - total flux cleaned = 0.132207 Jy ! Component: 1700 - total flux cleaned = 0.133925 Jy ! Component: 1750 - total flux cleaned = 0.135952 Jy ! Component: 1800 - total flux cleaned = 0.136288 Jy ! Component: 1850 - total flux cleaned = 0.137608 Jy ! Component: 1900 - total flux cleaned = 0.138587 Jy ! Component: 1950 - total flux cleaned = 0.13987 Jy ! Component: 2000 - total flux cleaned = 0.14082 Jy ! Component: 2050 - total flux cleaned = 0.14207 Jy ! Component: 2100 - total flux cleaned = 0.143917 Jy ! Component: 2150 - total flux cleaned = 0.143918 Jy ! Component: 2200 - total flux cleaned = 0.144519 Jy ! Component: 2250 - total flux cleaned = 0.146007 Jy ! Component: 2300 - total flux cleaned = 0.146888 Jy ! Component: 2350 - total flux cleaned = 0.148625 Jy ! Component: 2400 - total flux cleaned = 0.149197 Jy ! Component: 2450 - total flux cleaned = 0.149195 Jy ! Component: 2500 - total flux cleaned = 0.150877 Jy ! Component: 2550 - total flux cleaned = 0.151982 Jy ! Component: 2600 - total flux cleaned = 0.153619 Jy ! Component: 2650 - total flux cleaned = 0.154427 Jy ! Component: 2700 - total flux cleaned = 0.155227 Jy ! Component: 2750 - total flux cleaned = 0.15655 Jy ! Component: 2800 - total flux cleaned = 0.157592 Jy ! Component: 2850 - total flux cleaned = 0.158368 Jy ! Component: 2900 - total flux cleaned = 0.159649 Jy ! Component: 2950 - total flux cleaned = 0.16041 Jy ! Component: 3000 - total flux cleaned = 0.161916 Jy ! Component: 3050 - total flux cleaned = 0.16266 Jy ! Component: 3100 - total flux cleaned = 0.163892 Jy ! Component: 3150 - total flux cleaned = 0.164866 Jy ! Component: 3200 - total flux cleaned = 0.16583 Jy ! Component: 3250 - total flux cleaned = 0.167262 Jy ! Component: 3300 - total flux cleaned = 0.168442 Jy ! Component: 3350 - total flux cleaned = 0.169611 Jy ! Component: 3400 - total flux cleaned = 0.169842 Jy ! Component: 3450 - total flux cleaned = 0.170302 Jy ! Component: 3500 - total flux cleaned = 0.170306 Jy ! Component: 3550 - total flux cleaned = 0.17144 Jy ! Component: 3600 - total flux cleaned = 0.172561 Jy ! Component: 3650 - total flux cleaned = 0.173447 Jy ! Component: 3700 - total flux cleaned = 0.173446 Jy ! Component: 3750 - total flux cleaned = 0.17432 Jy ! Component: 3800 - total flux cleaned = 0.175618 Jy ! Component: 3850 - total flux cleaned = 0.175833 Jy ! Component: 3900 - total flux cleaned = 0.176686 Jy ! Component: 3950 - total flux cleaned = 0.177111 Jy ! Component: 4000 - total flux cleaned = 0.177742 Jy ! Component: 4050 - total flux cleaned = 0.178574 Jy ! Total flux subtracted in 4096 components = 0.179399 Jy ! Clean residual min=-0.013270 max=0.012594 Jy/beam ! Clean residual mean=0.000306 rms=0.004712 Jy/beam ! Combined flux in latest and established models = 1.47896 Jy keep ! Adding 501 model components to the UV plane model. ! The established model now contains 531 components and 1.47896 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0457-2324_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.089 x 5.057 at 16.64 degrees (North through East) ! Clean map min=-0.02025 max=1.1741 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0457-2324_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.1741 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00501797 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28216 1.28216 2.56432 5.12864 10.2573 20.5146 41.0291 82.0583 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.174 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 233.98 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0457-2324_S_uvs.log closed on Sat Dec 26 10:12:04 2015