! Started logfile: /scr/pima/gb073_uvs/J0231+1322_S_uvs.log on Sat Dec 26 10:11:17 2015 obs /scr/pima/gb073_uvs/J0231+1322_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0231+1322_S_uva.fits ! AN table 1: 12 integrations on 3 of 3 possible baselines. ! AN table 2: 12 integrations on 6 of 6 possible baselines. ! AN table 3: 12 integrations on 21 of 21 possible baselines. ! AN table 4: 12 integrations on 55 of 55 possible baselines. ! AN table 5: 12 integrations on 10 of 10 possible baselines. ! AN table 6: 16 integrations on 66 of 66 possible baselines. ! AN table 7: 12 integrations on 15 of 15 possible baselines. ! AN table 8: 11 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.872655 visibilities/baseline/integration-bin. ! Found source: J0231+1322 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 19352 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0231+1322_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 60 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 60 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 60 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 60 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 6. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 18 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 72 telescope corrections were flagged in sub-array 6. ! A total of 16 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 40 telescope corrections were flagged in sub-array 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 27 telescope corrections were flagged in sub-array 5. ! A total of 82 telescope corrections were flagged in sub-array 6. ! A total of 42 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 29 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 82 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.940129Jy sigma=11.545991 ! Fit after self-cal, rms=0.860845Jy sigma=5.575520 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.62 mas, bmaj=3.005 mas, bpa=1.888 degrees ! Estimated noise=1.41858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.862414 Jy ! Component: 100 - total flux cleaned = 1.21858 Jy ! Total flux subtracted in 100 components = 1.21858 Jy ! Clean residual min=-0.087483 max=0.174146 Jy/beam ! Clean residual mean=0.000029 rms=0.022302 Jy/beam ! Combined flux in latest and established models = 1.21858 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.21858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.819960Jy sigma=4.205894 ! Fit after self-cal, rms=0.819503Jy sigma=4.204139 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201692 Jy ! Component: 100 - total flux cleaned = 0.325817 Jy ! Total flux subtracted in 100 components = 0.325817 Jy ! Clean residual min=-0.078163 max=0.129031 Jy/beam ! Clean residual mean=0.000066 rms=0.019618 Jy/beam ! Combined flux in latest and established models = 1.54439 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 1.54439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.732988Jy sigma=3.900101 ! Fit after self-cal, rms=0.732964Jy sigma=3.899823 ! Inverting map ! Added new window around map position (5.5, -18). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114371 Jy ! Component: 100 - total flux cleaned = 0.182252 Jy ! Total flux subtracted in 100 components = 0.182252 Jy ! Clean residual min=-0.075062 max=0.123260 Jy/beam ! Clean residual mean=0.000072 rms=0.018441 Jy/beam ! Combined flux in latest and established models = 1.72664 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 1.72664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.706290Jy sigma=3.716388 ! Fit after self-cal, rms=0.705004Jy sigma=3.703249 ! Inverting map ! Added new window around map position (-21, 61). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104193 Jy ! Component: 100 - total flux cleaned = 0.164588 Jy ! Total flux subtracted in 100 components = 0.164588 Jy ! Clean residual min=-0.068061 max=0.110421 Jy/beam ! Clean residual mean=0.000069 rms=0.017028 Jy/beam ! Combined flux in latest and established models = 1.89123 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 1.89123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.682667Jy sigma=3.474582 ! Fit after self-cal, rms=0.682094Jy sigma=3.464433 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.882 mas, bmaj=3.392 mas, bpa=0.4599 degrees ! Estimated noise=1.01156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.071521 Jy ! Component: 100 - total flux cleaned = 0.115558 Jy ! Component: 150 - total flux cleaned = 0.142348 Jy ! Component: 200 - total flux cleaned = 0.148396 Jy ! Total flux subtracted in 200 components = 0.148396 Jy ! Clean residual min=-0.080326 max=0.098053 Jy/beam ! Clean residual mean=0.000356 rms=0.020304 Jy/beam ! Combined flux in latest and established models = 2.03963 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 2.03963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.673763Jy sigma=3.329000 ! Fit after self-cal, rms=0.673884Jy sigma=3.321562 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.882 x 3.392 at 0.4599 degrees (North through East) ! Clean map min=-0.073331 max=1.2023 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.94 FD 0.90 KP 1.02 LA 0.97 ! MK 0.90 NL 0.91 OV 0.90 PT 1.02 ! SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.93 FD 0.94 KP 1.03 LA 1.09 ! MK 0.85 NL 1.01 OV 0.91 PT 1.04 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 FD 0.94 KP 1.01 LA 1.01 ! MK 0.94 NL 0.89 OV 1.00* PT 1.01 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.99 FD 0.90 KP 1.01 LA 1.03 ! MK 0.86 NL 0.93 OV 1.00* PT 1.05 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! EF 1.00* HH 1.00* ON 1.00* SC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* ON 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* MC 0.00* ON 0.00* SC 0.00* ! ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 30 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 0.00* HH 0.00* MC 0.00* ON 0.00* ! SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* MC 0.00* ZC 0.00* ! ! A total of 33 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* HH 0.00* ON 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! EF 1.00* HH 1.00* MC 1.00* NL 1.00* ! ON 1.00* SC 1.00* ZC 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 1.00* MC 1.00* ON 1.00* SC 1.00* ! ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* EF 1.00* FD 1.00* HH 1.00* ! KP 1.00* LA 1.00* MC 1.00* NL 1.00* ! ON 1.00* PT 1.00* SC 1.00* ZC 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00* MC 1.00* ON 1.00* ! SC 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Fit before self-cal, rms=0.673884Jy sigma=3.321562 ! Fit after self-cal, rms=0.666544Jy sigma=3.315491 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.887 mas, bmaj=3.46 mas, bpa=-0.1125 degrees ! Estimated noise=1.00514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105143 Jy ! Component: 100 - total flux cleaned = 0.0150585 Jy ! Component: 150 - total flux cleaned = 0.0157851 Jy ! Component: 200 - total flux cleaned = 0.0157962 Jy ! Total flux subtracted in 200 components = 0.0157962 Jy ! Clean residual min=-0.070790 max=0.086776 Jy/beam ! Clean residual mean=0.000327 rms=0.019377 Jy/beam ! Combined flux in latest and established models = 2.05542 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 2.05542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.665131Jy sigma=3.276611 ! Fit after self-cal, rms=0.665289Jy sigma=3.275702 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.665289Jy sigma=3.275702 ! Fit after self-cal, rms=0.665215Jy sigma=3.275625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.888 mas, bmaj=3.461 mas, bpa=-0.1088 degrees ! Estimated noise=1.00472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509079 Jy ! Component: 100 - total flux cleaned = 0.00506933 Jy ! Component: 150 - total flux cleaned = 0.00568711 Jy ! Component: 200 - total flux cleaned = 0.00569235 Jy ! Total flux subtracted in 200 components = 0.00569235 Jy ! Clean residual min=-0.069336 max=0.084920 Jy/beam ! Clean residual mean=0.000324 rms=0.019208 Jy/beam ! Combined flux in latest and established models = 2.06112 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 2.06112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.662848Jy sigma=3.269671 ! Fit after self-cal, rms=0.663115Jy sigma=3.269315 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, -62.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073054 Jy ! Component: 100 - total flux cleaned = 0.0813411 Jy ! Component: 150 - total flux cleaned = 0.086739 Jy ! Component: 200 - total flux cleaned = 0.0896004 Jy ! Total flux subtracted in 200 components = 0.0896004 Jy ! Clean residual min=-0.068634 max=0.078099 Jy/beam ! Clean residual mean=0.000295 rms=0.018163 Jy/beam ! Combined flux in latest and established models = 2.15072 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 2.15072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.652885Jy sigma=3.133004 ! Fit after self-cal, rms=0.651530Jy sigma=3.125251 ! Inverting map ! Added new window around map position (1, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731962 Jy ! Component: 100 - total flux cleaned = 0.108836 Jy ! Component: 150 - total flux cleaned = 0.120717 Jy ! Component: 200 - total flux cleaned = 0.125381 Jy ! Total flux subtracted in 200 components = 0.125381 Jy ! Clean residual min=-0.068873 max=0.069400 Jy/beam ! Clean residual mean=0.000299 rms=0.016885 Jy/beam ! Combined flux in latest and established models = 2.2761 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 73 components and 2.2761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.640178Jy sigma=3.017790 ! Fit after self-cal, rms=0.639463Jy sigma=3.011757 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.639463Jy sigma=3.011757 ! Fit after self-cal, rms=0.638366Jy sigma=2.998004 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.889 mas, bmaj=3.465 mas, bpa=-0.1096 degrees ! Estimated noise=1.0022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160413 Jy ! Component: 100 - total flux cleaned = 0.0186447 Jy ! Component: 150 - total flux cleaned = 0.021029 Jy ! Component: 200 - total flux cleaned = 0.0232602 Jy ! Total flux subtracted in 200 components = 0.0232602 Jy ! Clean residual min=-0.069731 max=0.068334 Jy/beam ! Clean residual mean=0.000287 rms=0.016497 Jy/beam ! Combined flux in latest and established models = 2.29936 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 79 components and 2.29936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.635370Jy sigma=2.974255 ! Fit after self-cal, rms=0.635292Jy sigma=2.973322 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456391 Jy ! Component: 100 - total flux cleaned = 0.00596491 Jy ! Component: 150 - total flux cleaned = 0.00791825 Jy ! Component: 200 - total flux cleaned = 0.00852848 Jy ! Total flux subtracted in 200 components = 0.00852848 Jy ! Clean residual min=-0.070094 max=0.068859 Jy/beam ! Clean residual mean=0.000288 rms=0.016465 Jy/beam ! Combined flux in latest and established models = 2.30789 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 87 components and 2.30789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.632570Jy sigma=2.966511 ! Fit after self-cal, rms=0.632571Jy sigma=2.966050 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.632571Jy sigma=2.966050 ! Fit after self-cal, rms=0.632684Jy sigma=2.965806 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.56 mas, bmaj=10.86 mas, bpa=9.798 degrees ! Estimated noise=1.54243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133463 Jy ! Component: 100 - total flux cleaned = 0.0183723 Jy ! Component: 150 - total flux cleaned = 0.0221818 Jy ! Component: 200 - total flux cleaned = 0.0222344 Jy ! Total flux subtracted in 200 components = 0.0222344 Jy ! Clean residual min=-0.143015 max=0.108713 Jy/beam ! Clean residual mean=0.000726 rms=0.036054 Jy/beam ! Combined flux in latest and established models = 2.33012 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 93 components and 2.33012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.632337Jy sigma=2.991890 ! Fit after self-cal, rms=0.631644Jy sigma=2.988917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155259 Jy ! Component: 100 - total flux cleaned = -0.00275174 Jy ! Component: 150 - total flux cleaned = -0.00218665 Jy ! Component: 200 - total flux cleaned = -0.00217255 Jy ! Total flux subtracted in 200 components = -0.00217255 Jy ! Clean residual min=-0.141373 max=0.108111 Jy/beam ! Clean residual mean=0.000706 rms=0.035562 Jy/beam ! Combined flux in latest and established models = 2.32795 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 2.32795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.632465Jy sigma=3.007125 ! Fit after self-cal, rms=0.632446Jy sigma=3.006674 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.889 mas, bmaj=3.465 mas, bpa=-0.1135 degrees ! Estimated noise=1.0024 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.889 x 3.465 at -0.1135 degrees (North through East) ! Clean map min=-0.064576 max=1.2306 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.632446Jy sigma=3.006674 ! Fit after self-cal, rms=0.632068Jy sigma=3.001924 ! Inverting map and beam ! Estimated beam: bmin=1.89 mas, bmaj=3.467 mas, bpa=-0.1105 degrees ! Estimated noise=1.00125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0164622 Jy ! Component: 100 - total flux cleaned = -0.0183239 Jy ! Component: 150 - total flux cleaned = -0.0190792 Jy ! Component: 200 - total flux cleaned = -0.0190797 Jy ! Total flux subtracted in 200 components = -0.0190797 Jy ! Clean residual min=-0.069544 max=0.069540 Jy/beam ! Clean residual mean=0.000257 rms=0.016091 Jy/beam ! Combined flux in latest and established models = 2.30887 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 2.30887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.628544Jy sigma=2.988199 ! Fit after self-cal, rms=0.628526Jy sigma=2.987046 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000856126 Jy ! Component: 100 - total flux cleaned = 0.000395841 Jy ! Component: 150 - total flux cleaned = 0.00156061 Jy ! Component: 200 - total flux cleaned = 0.00212247 Jy ! Total flux subtracted in 200 components = 0.00212247 Jy ! Clean residual min=-0.070270 max=0.069420 Jy/beam ! Clean residual mean=0.000261 rms=0.016119 Jy/beam ! Combined flux in latest and established models = 2.31099 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 2.31099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.626648Jy sigma=2.979709 ! Fit after self-cal, rms=0.626718Jy sigma=2.979472 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.626718Jy sigma=2.979472 ! Fit after self-cal, rms=0.626701Jy sigma=2.979365 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.629 mas, bmaj=3.032 mas, bpa=1.549 degrees ! Estimated noise=1.39397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.850118 Jy ! Component: 100 - total flux cleaned = 1.19898 Jy ! Component: 150 - total flux cleaned = 1.40787 Jy ! Component: 200 - total flux cleaned = 1.55864 Jy ! Total flux subtracted in 200 components = 1.55864 Jy ! Clean residual min=-0.075280 max=0.102778 Jy/beam ! Clean residual mean=0.000039 rms=0.018092 Jy/beam ! Combined flux in latest and established models = 1.55864 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.55864 Jy ! Inverting map and beam ! Estimated beam: bmin=1.89 mas, bmaj=3.466 mas, bpa=-0.111 degrees ! Estimated noise=1.00158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147867 Jy ! Component: 100 - total flux cleaned = 0.259953 Jy ! Component: 150 - total flux cleaned = 0.35169 Jy ! Component: 200 - total flux cleaned = 0.428422 Jy ! Total flux subtracted in 200 components = 0.428422 Jy ! Clean residual min=-0.064421 max=0.079372 Jy/beam ! Clean residual mean=0.000258 rms=0.017680 Jy/beam ! Combined flux in latest and established models = 1.98706 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 1.98706 Jy ! Inverting map ! Added new window around map position (-75, 113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.079573 Jy ! Component: 100 - total flux cleaned = 0.137743 Jy ! Component: 150 - total flux cleaned = 0.187418 Jy ! Component: 200 - total flux cleaned = 0.23007 Jy ! Total flux subtracted in 200 components = 0.23007 Jy ! Clean residual min=-0.062828 max=0.063790 Jy/beam ! Clean residual mean=0.000241 rms=0.016001 Jy/beam ! Combined flux in latest and established models = 2.21713 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 2.21713 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.56 mas, bmaj=10.87 mas, bpa=9.957 degrees ! Estimated noise=1.53881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0648699 Jy ! Component: 100 - total flux cleaned = 0.0932035 Jy ! Component: 150 - total flux cleaned = 0.117668 Jy ! Component: 200 - total flux cleaned = 0.138747 Jy ! Total flux subtracted in 200 components = 0.138747 Jy ! Clean residual min=-0.132562 max=0.107522 Jy/beam ! Clean residual mean=0.000609 rms=0.033557 Jy/beam ! Combined flux in latest and established models = 2.35588 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104262 Jy ! Component: 100 - total flux cleaned = 0.0149558 Jy ! Component: 150 - total flux cleaned = 0.019023 Jy ! Component: 200 - total flux cleaned = 0.0233604 Jy ! Total flux subtracted in 200 components = 0.0233604 Jy ! Clean residual min=-0.132557 max=0.106426 Jy/beam ! Clean residual mean=0.000595 rms=0.033166 Jy/beam ! Combined flux in latest and established models = 2.37924 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 2.37924 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.89 mas, bmaj=3.466 mas, bpa=-0.111 degrees ! Estimated noise=1.00158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0221267 Jy ! Component: 100 - total flux cleaned = -0.0260499 Jy ! Component: 150 - total flux cleaned = -0.0249764 Jy ! Component: 200 - total flux cleaned = -0.0228987 Jy ! Total flux subtracted in 200 components = -0.0228987 Jy ! Clean residual min=-0.061072 max=0.063875 Jy/beam ! Clean residual mean=0.000217 rms=0.015364 Jy/beam ! Combined flux in latest and established models = 2.35634 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 98 components and 2.35634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.624690Jy sigma=2.951237 ! Fit after self-cal, rms=0.623197Jy sigma=2.929900 wmodel /scr/pima/gb073_uvs/J0231+1322_S_map.mod ! Writing 98 model components to file: /scr/pima/gb073_uvs/J0231+1322_S_map.mod wobs /scr/pima/gb073_uvs/J0231+1322_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0231+1322_S_uvs.fits wwins /scr/pima/gb073_uvs/J0231+1322_S_map.win ! wwins: Wrote 7 windows to /scr/pima/gb073_uvs/J0231+1322_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00854582 Jy ! Component: 100 - total flux cleaned = 0.0138173 Jy ! Component: 150 - total flux cleaned = 0.0178183 Jy ! Component: 200 - total flux cleaned = 0.0197282 Jy ! Component: 250 - total flux cleaned = 0.024405 Jy ! Component: 300 - total flux cleaned = 0.0316065 Jy ! Component: 350 - total flux cleaned = 0.0359669 Jy ! Component: 400 - total flux cleaned = 0.0401874 Jy ! Component: 450 - total flux cleaned = 0.044298 Jy ! Component: 500 - total flux cleaned = 0.0483246 Jy ! Component: 550 - total flux cleaned = 0.0514809 Jy ! Component: 600 - total flux cleaned = 0.0568871 Jy ! Component: 650 - total flux cleaned = 0.0606599 Jy ! Component: 700 - total flux cleaned = 0.0636524 Jy ! Component: 750 - total flux cleaned = 0.0702176 Jy ! Component: 800 - total flux cleaned = 0.0730944 Jy ! Component: 850 - total flux cleaned = 0.0787316 Jy ! Component: 900 - total flux cleaned = 0.0856598 Jy ! Component: 950 - total flux cleaned = 0.0897588 Jy ! Component: 1000 - total flux cleaned = 0.0931164 Jy ! Component: 1050 - total flux cleaned = 0.0984114 Jy ! Component: 1100 - total flux cleaned = 0.102975 Jy ! Component: 1150 - total flux cleaned = 0.107491 Jy ! Component: 1200 - total flux cleaned = 0.113211 Jy ! Component: 1250 - total flux cleaned = 0.118219 Jy ! Component: 1300 - total flux cleaned = 0.123788 Jy ! Component: 1350 - total flux cleaned = 0.130497 Jy ! Component: 1400 - total flux cleaned = 0.135318 Jy ! Component: 1450 - total flux cleaned = 0.141269 Jy ! Component: 1500 - total flux cleaned = 0.147151 Jy ! Component: 1550 - total flux cleaned = 0.150647 Jy ! Component: 1600 - total flux cleaned = 0.157539 Jy ! Component: 1650 - total flux cleaned = 0.162647 Jy ! Component: 1700 - total flux cleaned = 0.168811 Jy ! Component: 1750 - total flux cleaned = 0.173804 Jy ! Component: 1800 - total flux cleaned = 0.180385 Jy ! Component: 1850 - total flux cleaned = 0.183641 Jy ! Component: 1900 - total flux cleaned = 0.188484 Jy ! Component: 1950 - total flux cleaned = 0.193276 Jy ! Component: 2000 - total flux cleaned = 0.198017 Jy ! Component: 2050 - total flux cleaned = 0.204287 Jy ! Component: 2100 - total flux cleaned = 0.207904 Jy ! Component: 2150 - total flux cleaned = 0.211995 Jy ! Component: 2200 - total flux cleaned = 0.215551 Jy ! Component: 2250 - total flux cleaned = 0.219577 Jy ! Component: 2300 - total flux cleaned = 0.224064 Jy ! Component: 2350 - total flux cleaned = 0.22851 Jy ! Component: 2400 - total flux cleaned = 0.232428 Jy ! Component: 2450 - total flux cleaned = 0.234368 Jy ! Component: 2500 - total flux cleaned = 0.238703 Jy ! Component: 2550 - total flux cleaned = 0.243487 Jy ! Component: 2600 - total flux cleaned = 0.245851 Jy ! Component: 2650 - total flux cleaned = 0.250085 Jy ! Component: 2700 - total flux cleaned = 0.251949 Jy ! Component: 2750 - total flux cleaned = 0.256577 Jy ! Component: 2800 - total flux cleaned = 0.261626 Jy ! Component: 2850 - total flux cleaned = 0.26345 Jy ! Component: 2900 - total flux cleaned = 0.267519 Jy ! Component: 2950 - total flux cleaned = 0.271112 Jy ! Component: 3000 - total flux cleaned = 0.274228 Jy ! Component: 3050 - total flux cleaned = 0.276881 Jy ! Component: 3100 - total flux cleaned = 0.280394 Jy ! Component: 3150 - total flux cleaned = 0.284748 Jy ! Component: 3200 - total flux cleaned = 0.288638 Jy ! Component: 3250 - total flux cleaned = 0.291642 Jy ! Component: 3300 - total flux cleaned = 0.294623 Jy ! Component: 3350 - total flux cleaned = 0.299274 Jy ! Component: 3400 - total flux cleaned = 0.300951 Jy ! Component: 3450 - total flux cleaned = 0.305119 Jy ! Component: 3500 - total flux cleaned = 0.308427 Jy ! Component: 3550 - total flux cleaned = 0.31089 Jy ! Component: 3600 - total flux cleaned = 0.314559 Jy ! Component: 3650 - total flux cleaned = 0.318208 Jy ! Component: 3700 - total flux cleaned = 0.321021 Jy ! Component: 3750 - total flux cleaned = 0.324218 Jy ! Component: 3800 - total flux cleaned = 0.327389 Jy ! Component: 3850 - total flux cleaned = 0.330544 Jy ! Component: 3900 - total flux cleaned = 0.333288 Jy ! Component: 3950 - total flux cleaned = 0.336791 Jy ! Component: 4000 - total flux cleaned = 0.339885 Jy ! Component: 4050 - total flux cleaned = 0.34296 Jy ! Total flux subtracted in 4096 components = 0.346395 Jy ! Clean residual min=-0.019011 max=0.021374 Jy/beam ! Clean residual mean=0.000136 rms=0.006871 Jy/beam ! Combined flux in latest and established models = 2.70273 Jy keep ! Adding 380 model components to the UV plane model. ! The established model now contains 477 components and 2.70273 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0231+1322_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.89 x 3.466 at -0.111 degrees (North through East) ! Clean map min=-0.036211 max=1.2358 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0231+1322_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.23579 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00675697 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.64033 1.64033 3.28065 6.5613 13.1226 26.2452 52.4904 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0202 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.235 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 182.89 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0231+1322_S_uvs.log closed on Sat Dec 26 10:11:23 2015