! Started logfile: /scr/pima/gb073_uvs/J0136+4751_S_uvs.log on Sat Dec 26 10:10:50 2015 obs /scr/pima/gb073_uvs/J0136+4751_S_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0136+4751_S_uva.fits ! AN table 1: 11 integrations on 45 of 45 possible baselines. ! AN table 2: 11 integrations on 55 of 55 possible baselines. ! AN table 3: 12 integrations on 6 of 6 possible baselines. ! AN table 4: 12 integrations on 55 of 55 possible baselines. ! AN table 5: 12 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.946893 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22499e+09 8e+06 1 8e+06 ! 02 2 2.23299e+09 8e+06 1 8e+06 ! 03 3 2.25499e+09 8e+06 1 8e+06 ! 04 4 2.26299e+09 8e+06 1 8e+06 ! 05 5 2.34499e+09 8e+06 1 8e+06 ! 06 6 2.35299e+09 8e+06 1 8e+06 ! 07 7 2.36499e+09 8e+06 1 8e+06 ! 08 8 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 20968 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0136+4751_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 35 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 35 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 33 telescope corrections were flagged in sub-array 4. ! A total of 35 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 33 telescope corrections were flagged in sub-array 4. ! A total of 35 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 44 telescope corrections were flagged in sub-array 4. ! A total of 46 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 3. ! A total of 33 telescope corrections were flagged in sub-array 4. ! A total of 46 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.355554Jy sigma=9.340256 ! Fit after self-cal, rms=0.523838Jy sigma=4.616215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.745 mas, bmaj=3.482 mas, bpa=-28.85 degrees ! Estimated noise=1.43872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.471017 Jy ! Component: 100 - total flux cleaned = 0.690019 Jy ! Total flux subtracted in 100 components = 0.690019 Jy ! Clean residual min=-0.041910 max=0.115226 Jy/beam ! Clean residual mean=0.000037 rms=0.011672 Jy/beam ! Combined flux in latest and established models = 0.690019 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.690019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.479578Jy sigma=2.442272 ! Fit after self-cal, rms=0.479176Jy sigma=2.439940 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140574 Jy ! Component: 100 - total flux cleaned = 0.233791 Jy ! Total flux subtracted in 100 components = 0.233791 Jy ! Clean residual min=-0.042847 max=0.050890 Jy/beam ! Clean residual mean=-0.000025 rms=0.009300 Jy/beam ! Combined flux in latest and established models = 0.92381 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.92381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.396409Jy sigma=1.839308 ! Fit after self-cal, rms=0.396136Jy sigma=1.838079 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.115 mas, bmaj=4.009 mas, bpa=-28.35 degrees ! Estimated noise=0.910587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0936977 Jy ! Component: 100 - total flux cleaned = 0.145535 Jy ! Component: 150 - total flux cleaned = 0.175641 Jy ! Component: 200 - total flux cleaned = 0.19324 Jy ! Total flux subtracted in 200 components = 0.19324 Jy ! Clean residual min=-0.027246 max=0.045140 Jy/beam ! Clean residual mean=-0.000315 rms=0.008937 Jy/beam ! Combined flux in latest and established models = 1.11705 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 1.11705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.359436Jy sigma=1.705192 ! Fit after self-cal, rms=0.359201Jy sigma=1.704289 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.115 x 4.009 at -28.35 degrees (North through East) ! Clean map min=-0.026445 max=0.67085 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 KP 1.00 LA 0.98 ! MC 1.18 MK 1.04 NL 1.00 OV 0.99 ! PT 0.99 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 KP 1.00 LA 0.98 ! MC 1.08 MK 0.88 NL 0.90 ON 0.87 ! OV 0.96 PT 1.01 SC 0.92 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 KP 1.03 LA 1.07 ! MC 0.98 MK 0.97 NL 1.09 OV 0.94 ! PT 1.02 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 KP 1.02 LA 1.06 ! MC 0.96 MK 0.85 NL 0.96 ON 1.13 ! OV 0.94 PT 1.02 SC 0.95 ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 KP 1.01 LA 0.97 ! MC 0.84 MK 1.13 NL 1.07 OV 1.00* ! PT 0.97 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 KP 1.01 LA 0.99 ! MC 0.98 MK 1.01 NL 1.11 OV 1.00* ! PT 0.98 ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 0.89 LA 0.86 ! MC 0.92 MK 0.99 NL 1.15 OV 1.03 ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 KP 0.87 LA 1.01 ! MC 0.85 MK 0.99 NL 1.20 OV 1.02 ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MC 1.00* MK 1.00* NL 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 1.00* ! ! A total of 33 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* ON 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* PT 1.00* ZC 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* EF 1.00* FD 1.00* KP 1.00* ! LA 1.00* MC 1.00* MK 1.00* NL 1.00* ! ON 1.00* OV 1.00* PT 1.00* SC 1.00* ! ZC 1.00* ! ! ! Fit before self-cal, rms=0.359201Jy sigma=1.704289 ! Fit after self-cal, rms=0.358809Jy sigma=1.703423 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=4.011 mas, bpa=-28.65 degrees ! Estimated noise=0.904955 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00938837 Jy ! Component: 100 - total flux cleaned = 0.011993 Jy ! Component: 150 - total flux cleaned = 0.0123277 Jy ! Component: 200 - total flux cleaned = 0.0124842 Jy ! Total flux subtracted in 200 components = 0.0124842 Jy ! Clean residual min=-0.027110 max=0.043314 Jy/beam ! Clean residual mean=-0.000313 rms=0.008800 Jy/beam ! Combined flux in latest and established models = 1.12953 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 1.12953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.358349Jy sigma=1.694233 ! Fit after self-cal, rms=0.358369Jy sigma=1.694003 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.358369Jy sigma=1.694003 ! Fit after self-cal, rms=0.357882Jy sigma=1.688192 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.117 mas, bmaj=4.011 mas, bpa=-28.62 degrees ! Estimated noise=0.905785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228015 Jy ! Component: 100 - total flux cleaned = 0.00276727 Jy ! Component: 150 - total flux cleaned = 0.00291731 Jy ! Component: 200 - total flux cleaned = 0.0029197 Jy ! Total flux subtracted in 200 components = 0.0029197 Jy ! Clean residual min=-0.027206 max=0.043583 Jy/beam ! Clean residual mean=-0.000319 rms=0.008785 Jy/beam ! Combined flux in latest and established models = 1.13245 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 1.13245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.357558Jy sigma=1.686757 ! Fit after self-cal, rms=0.357577Jy sigma=1.686633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.5, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433227 Jy ! Component: 100 - total flux cleaned = 0.0558659 Jy ! Component: 150 - total flux cleaned = 0.0613256 Jy ! Component: 200 - total flux cleaned = 0.0656725 Jy ! Total flux subtracted in 200 components = 0.0656725 Jy ! Clean residual min=-0.027906 max=0.037044 Jy/beam ! Clean residual mean=-0.000265 rms=0.008168 Jy/beam ! Combined flux in latest and established models = 1.19813 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 1.19813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.351083Jy sigma=1.586315 ! Fit after self-cal, rms=0.350536Jy sigma=1.582579 ! Inverting map ! Added new window around map position (-83, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347804 Jy ! Component: 100 - total flux cleaned = 0.0522156 Jy ! Component: 150 - total flux cleaned = 0.0592568 Jy ! Component: 200 - total flux cleaned = 0.0616443 Jy ! Total flux subtracted in 200 components = 0.0616443 Jy ! Clean residual min=-0.026474 max=0.035626 Jy/beam ! Clean residual mean=-0.000245 rms=0.007821 Jy/beam ! Combined flux in latest and established models = 1.25977 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 1.25977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.345436Jy sigma=1.533926 ! Fit after self-cal, rms=0.345074Jy sigma=1.530004 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.345074Jy sigma=1.530004 ! Fit after self-cal, rms=0.345130Jy sigma=1.529065 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.117 mas, bmaj=4.012 mas, bpa=-28.61 degrees ! Estimated noise=0.905605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105712 Jy ! Component: 100 - total flux cleaned = 0.014176 Jy ! Component: 150 - total flux cleaned = 0.0166377 Jy ! Component: 200 - total flux cleaned = 0.0181622 Jy ! Total flux subtracted in 200 components = 0.0181622 Jy ! Clean residual min=-0.026165 max=0.031826 Jy/beam ! Clean residual mean=-0.000244 rms=0.007730 Jy/beam ! Combined flux in latest and established models = 1.27793 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 98 components and 1.27793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.343002Jy sigma=1.523948 ! Fit after self-cal, rms=0.342959Jy sigma=1.523414 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403382 Jy ! Component: 100 - total flux cleaned = 0.00652891 Jy ! Component: 150 - total flux cleaned = 0.00786502 Jy ! Component: 200 - total flux cleaned = 0.00882137 Jy ! Total flux subtracted in 200 components = 0.00882137 Jy ! Clean residual min=-0.026351 max=0.030786 Jy/beam ! Clean residual mean=-0.000241 rms=0.007699 Jy/beam ! Combined flux in latest and established models = 1.28676 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 108 components and 1.28676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.341597Jy sigma=1.521465 ! Fit after self-cal, rms=0.341595Jy sigma=1.521271 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.341595Jy sigma=1.521271 ! Fit after self-cal, rms=0.340546Jy sigma=1.512517 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.015 mas, bmaj=10.38 mas, bpa=36.01 degrees ! Estimated noise=1.30501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870868 Jy ! Component: 100 - total flux cleaned = 0.0135181 Jy ! Component: 150 - total flux cleaned = 0.0170733 Jy ! Component: 200 - total flux cleaned = 0.0187693 Jy ! Total flux subtracted in 200 components = 0.0187693 Jy ! Clean residual min=-0.056941 max=0.052913 Jy/beam ! Clean residual mean=-0.000644 rms=0.017446 Jy/beam ! Combined flux in latest and established models = 1.30552 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 112 components and 1.30552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.341088Jy sigma=1.510894 ! Fit after self-cal, rms=0.340960Jy sigma=1.509323 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166443 Jy ! Component: 100 - total flux cleaned = 0.00514653 Jy ! Component: 150 - total flux cleaned = 0.00776611 Jy ! Component: 200 - total flux cleaned = 0.00828903 Jy ! Total flux subtracted in 200 components = 0.00828903 Jy ! Clean residual min=-0.056778 max=0.052229 Jy/beam ! Clean residual mean=-0.000634 rms=0.017342 Jy/beam ! Combined flux in latest and established models = 1.31381 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 116 components and 1.31381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.341381Jy sigma=1.517985 ! Fit after self-cal, rms=0.341307Jy sigma=1.516541 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.117 mas, bmaj=4.008 mas, bpa=-28.58 degrees ! Estimated noise=0.905231 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.117 x 4.008 at -28.58 degrees (North through East) ! Clean map min=-0.025685 max=0.67566 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.341307Jy sigma=1.516541 ! Fit after self-cal, rms=0.340764Jy sigma=1.510574 ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=4.006 mas, bpa=-28.57 degrees ! Estimated noise=0.905859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00476436 Jy ! Component: 100 - total flux cleaned = -0.00553591 Jy ! Component: 150 - total flux cleaned = -0.00623742 Jy ! Component: 200 - total flux cleaned = -0.00623262 Jy ! Total flux subtracted in 200 components = -0.00623262 Jy ! Clean residual min=-0.026400 max=0.030277 Jy/beam ! Clean residual mean=-0.000235 rms=0.007555 Jy/beam ! Combined flux in latest and established models = 1.30758 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 127 components and 1.30758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.339136Jy sigma=1.503492 ! Fit after self-cal, rms=0.339138Jy sigma=1.503203 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203263 Jy ! Component: 100 - total flux cleaned = -0.00203314 Jy ! Component: 150 - total flux cleaned = -0.00202734 Jy ! Component: 200 - total flux cleaned = -0.00202467 Jy ! Total flux subtracted in 200 components = -0.00202467 Jy ! Clean residual min=-0.026514 max=0.030311 Jy/beam ! Clean residual mean=-0.000237 rms=0.007550 Jy/beam ! Combined flux in latest and established models = 1.30556 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 137 components and 1.30556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.338238Jy sigma=1.501368 ! Fit after self-cal, rms=0.338256Jy sigma=1.501294 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.338256Jy sigma=1.501294 ! Fit after self-cal, rms=0.338145Jy sigma=1.500987 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.746 mas, bmaj=3.476 mas, bpa=-29.1 degrees ! Estimated noise=1.43312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.467722 Jy ! Component: 100 - total flux cleaned = 0.689258 Jy ! Component: 150 - total flux cleaned = 0.830417 Jy ! Component: 200 - total flux cleaned = 0.924064 Jy ! Total flux subtracted in 200 components = 0.924064 Jy ! Clean residual min=-0.041230 max=0.051657 Jy/beam ! Clean residual mean=-0.000030 rms=0.009143 Jy/beam ! Combined flux in latest and established models = 0.924064 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.924064 Jy ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=4.006 mas, bpa=-28.62 degrees ! Estimated noise=0.905637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0938297 Jy ! Component: 100 - total flux cleaned = 0.153965 Jy ! Component: 150 - total flux cleaned = 0.199356 Jy ! Component: 200 - total flux cleaned = 0.235877 Jy ! Total flux subtracted in 200 components = 0.235877 Jy ! Clean residual min=-0.028206 max=0.037070 Jy/beam ! Clean residual mean=-0.000271 rms=0.008222 Jy/beam ! Combined flux in latest and established models = 1.15994 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 65 components and 1.15994 Jy ! Inverting map ! Added new window around map position (11.5, -58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036775 Jy ! Component: 100 - total flux cleaned = 0.0583701 Jy ! Component: 150 - total flux cleaned = 0.0751442 Jy ! Component: 200 - total flux cleaned = 0.0866819 Jy ! Total flux subtracted in 200 components = 0.0866819 Jy ! Clean residual min=-0.029033 max=0.031539 Jy/beam ! Clean residual mean=-0.000261 rms=0.007713 Jy/beam ! Combined flux in latest and established models = 1.24662 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 89 components and 1.24662 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.016 mas, bmaj=10.39 mas, bpa=36.02 degrees ! Estimated noise=1.30611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339293 Jy ! Component: 100 - total flux cleaned = 0.0563336 Jy ! Component: 150 - total flux cleaned = 0.0689205 Jy ! Component: 200 - total flux cleaned = 0.0757289 Jy ! Total flux subtracted in 200 components = 0.0757289 Jy ! Clean residual min=-0.058743 max=0.045753 Jy/beam ! Clean residual mean=-0.000670 rms=0.016922 Jy/beam ! Combined flux in latest and established models = 1.32235 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057895 Jy ! Component: 100 - total flux cleaned = 0.00854591 Jy ! Component: 150 - total flux cleaned = 0.0107418 Jy ! Component: 200 - total flux cleaned = 0.0121211 Jy ! Total flux subtracted in 200 components = 0.0121211 Jy ! Clean residual min=-0.057700 max=0.045033 Jy/beam ! Clean residual mean=-0.000654 rms=0.016802 Jy/beam ! Combined flux in latest and established models = 1.33447 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 1.33447 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=4.006 mas, bpa=-28.62 degrees ! Estimated noise=0.905637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.011762 Jy ! Component: 100 - total flux cleaned = -0.0131519 Jy ! Component: 150 - total flux cleaned = -0.01189 Jy ! Component: 200 - total flux cleaned = -0.0102149 Jy ! Total flux subtracted in 200 components = -0.0102149 Jy ! Clean residual min=-0.027048 max=0.031659 Jy/beam ! Clean residual mean=-0.000242 rms=0.007519 Jy/beam ! Combined flux in latest and established models = 1.32426 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 122 components and 1.32426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.337319Jy sigma=1.521653 ! Fit after self-cal, rms=0.336318Jy sigma=1.516623 wmodel /scr/pima/gb073_uvs/J0136+4751_S_map.mod ! Writing 122 model components to file: /scr/pima/gb073_uvs/J0136+4751_S_map.mod wobs /scr/pima/gb073_uvs/J0136+4751_S_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0136+4751_S_uvs.fits wwins /scr/pima/gb073_uvs/J0136+4751_S_map.win ! wwins: Wrote 4 windows to /scr/pima/gb073_uvs/J0136+4751_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142957 Jy ! Component: 100 - total flux cleaned = 0.0230334 Jy ! Component: 150 - total flux cleaned = 0.0293322 Jy ! Component: 200 - total flux cleaned = 0.034888 Jy ! Component: 250 - total flux cleaned = 0.0384621 Jy ! Component: 300 - total flux cleaned = 0.0419437 Jy ! Component: 350 - total flux cleaned = 0.047019 Jy ! Component: 400 - total flux cleaned = 0.0507301 Jy ! Component: 450 - total flux cleaned = 0.0543584 Jy ! Component: 500 - total flux cleaned = 0.0575148 Jy ! Component: 550 - total flux cleaned = 0.0609915 Jy ! Component: 600 - total flux cleaned = 0.0640202 Jy ! Component: 650 - total flux cleaned = 0.0658746 Jy ! Component: 700 - total flux cleaned = 0.0673366 Jy ! Component: 750 - total flux cleaned = 0.0698498 Jy ! Component: 800 - total flux cleaned = 0.0716106 Jy ! Component: 850 - total flux cleaned = 0.0733464 Jy ! Component: 900 - total flux cleaned = 0.0757379 Jy ! Component: 950 - total flux cleaned = 0.0787589 Jy ! Component: 1000 - total flux cleaned = 0.0807374 Jy ! Component: 1050 - total flux cleaned = 0.0826941 Jy ! Component: 1100 - total flux cleaned = 0.0839821 Jy ! Component: 1150 - total flux cleaned = 0.086845 Jy ! Component: 1200 - total flux cleaned = 0.0890375 Jy ! Component: 1250 - total flux cleaned = 0.0902763 Jy ! Component: 1300 - total flux cleaned = 0.0921081 Jy ! Component: 1350 - total flux cleaned = 0.0945117 Jy ! Component: 1400 - total flux cleaned = 0.0962894 Jy ! Component: 1450 - total flux cleaned = 0.097459 Jy ! Component: 1500 - total flux cleaned = 0.0991939 Jy ! Component: 1550 - total flux cleaned = 0.100625 Jy ! Component: 1600 - total flux cleaned = 0.101472 Jy ! Component: 1650 - total flux cleaned = 0.103709 Jy ! Component: 1700 - total flux cleaned = 0.104812 Jy ! Component: 1750 - total flux cleaned = 0.106179 Jy ! Component: 1800 - total flux cleaned = 0.108333 Jy ! Component: 1850 - total flux cleaned = 0.109129 Jy ! Component: 1900 - total flux cleaned = 0.11071 Jy ! Component: 1950 - total flux cleaned = 0.111752 Jy ! Component: 2000 - total flux cleaned = 0.113299 Jy ! Component: 2050 - total flux cleaned = 0.114066 Jy ! Component: 2100 - total flux cleaned = 0.115583 Jy ! Component: 2150 - total flux cleaned = 0.117333 Jy ! Component: 2200 - total flux cleaned = 0.118324 Jy ! Component: 2250 - total flux cleaned = 0.119793 Jy ! Component: 2300 - total flux cleaned = 0.121487 Jy ! Component: 2350 - total flux cleaned = 0.122204 Jy ! Component: 2400 - total flux cleaned = 0.123156 Jy ! Component: 2450 - total flux cleaned = 0.123862 Jy ! Component: 2500 - total flux cleaned = 0.125727 Jy ! Component: 2550 - total flux cleaned = 0.126187 Jy ! Component: 2600 - total flux cleaned = 0.127332 Jy ! Component: 2650 - total flux cleaned = 0.128923 Jy ! Component: 2700 - total flux cleaned = 0.128922 Jy ! Component: 2750 - total flux cleaned = 0.130259 Jy ! Component: 2800 - total flux cleaned = 0.130699 Jy ! Component: 2850 - total flux cleaned = 0.131135 Jy ! Component: 2900 - total flux cleaned = 0.132437 Jy ! Component: 2950 - total flux cleaned = 0.1333 Jy ! Component: 3000 - total flux cleaned = 0.134154 Jy ! Component: 3050 - total flux cleaned = 0.135423 Jy ! Component: 3100 - total flux cleaned = 0.135212 Jy ! Component: 3150 - total flux cleaned = 0.136042 Jy ! Component: 3200 - total flux cleaned = 0.137488 Jy ! Component: 3250 - total flux cleaned = 0.136872 Jy ! Component: 3300 - total flux cleaned = 0.138497 Jy ! Component: 3350 - total flux cleaned = 0.139303 Jy ! Component: 3400 - total flux cleaned = 0.139304 Jy ! Component: 3450 - total flux cleaned = 0.140098 Jy ! Component: 3500 - total flux cleaned = 0.140885 Jy ! Component: 3550 - total flux cleaned = 0.141079 Jy ! Component: 3600 - total flux cleaned = 0.142437 Jy ! Component: 3650 - total flux cleaned = 0.142243 Jy ! Component: 3700 - total flux cleaned = 0.143007 Jy ! Component: 3750 - total flux cleaned = 0.143195 Jy ! Component: 3800 - total flux cleaned = 0.143759 Jy ! Component: 3850 - total flux cleaned = 0.143946 Jy ! Component: 3900 - total flux cleaned = 0.144687 Jy ! Component: 3950 - total flux cleaned = 0.14487 Jy ! Component: 4000 - total flux cleaned = 0.144686 Jy ! Component: 4050 - total flux cleaned = 0.145593 Jy ! Total flux subtracted in 4096 components = 0.145592 Jy ! Clean residual min=-0.009984 max=0.008975 Jy/beam ! Clean residual mean=-0.000111 rms=0.003683 Jy/beam ! Combined flux in latest and established models = 1.46985 Jy keep ! Adding 449 model components to the UV plane model. ! The established model now contains 571 components and 1.46985 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0136+4751_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.116 x 4.006 at -28.62 degrees (North through East) ! Clean map min=-0.015894 max=0.67116 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0136+4751_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.671163 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0036641 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.6378 1.6378 3.2756 6.55119 13.1024 26.2048 52.4095 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0109 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.671 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 183.172 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0136+4751_S_uvs.log closed on Sat Dec 26 10:10:55 2015