! Started logfile: /scr/pima/gb073_uvs/J0112+2020_X_uvs.log on Sat Dec 26 09:31:14 2015 obs /scr/pima/gb073_uvs/J0112+2020_X_uva.fits ! Reading UV FITS file: /scr/pima/gb073_uvs/J0112+2020_X_uva.fits ! AN table 1: 50 integrations on 6 of 6 possible baselines. ! AN table 2: 17 integrations on 6 of 6 possible baselines. ! AN table 3: 41 integrations on 66 of 66 possible baselines. ! AN table 4: 10 integrations on 36 of 36 possible baselines. ! AN table 5: 9 integrations on 28 of 28 possible baselines. ! AN table 6: 19 integrations on 10 of 10 possible baselines. ! AN table 7: 19 integrations on 10 of 10 possible baselines. ! AN table 8: 23 integrations on 10 of 10 possible baselines. ! AN table 9: 14 integrations on 66 of 66 possible baselines. ! Apparent sampling: 0.816711 visibilities/baseline/integration-bin. ! Found source: J0112+2020 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.39799e+09 8e+06 1 8e+06 ! 02 2 8.40599e+09 8e+06 1 8e+06 ! 03 3 8.46799e+09 8e+06 1 8e+06 ! 04 4 8.47599e+09 8e+06 1 8e+06 ! 05 5 8.78299e+09 8e+06 1 8e+06 ! 06 6 8.79099e+09 8e+06 1 8e+06 ! 07 7 8.88799e+09 8e+06 1 8e+06 ! 08 8 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 34328 visibilities. select RR ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gb073_uvs/J0112+2020_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 79 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 79 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 79 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 79 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 5. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 120 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 46 telescope corrections were flagged in sub-array 8. ! A total of 32 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 6. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 120 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 46 telescope corrections were flagged in sub-array 8. ! A total of 32 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 7. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 79 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 8. ! A total of 74 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 79 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 23 telescope corrections were flagged in sub-array 6. ! A total of 30 telescope corrections were flagged in sub-array 7. ! A total of 13 telescope corrections were flagged in sub-array 8. ! A total of 18 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=1.048547Jy sigma=8.605868 ! Fit after self-cal, rms=0.724676Jy sigma=5.837643 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 11% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.4915 mas, bmaj=0.9011 mas, bpa=-0.8344 degrees ! Estimated noise=1.08402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218429 Jy ! Component: 100 - total flux cleaned = 0.269885 Jy ! Total flux subtracted in 100 components = 0.269885 Jy ! Clean residual min=-0.010173 max=0.021059 Jy/beam ! Clean residual mean=-0.000011 rms=0.001882 Jy/beam ! Combined flux in latest and established models = 0.269885 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.269885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.124066Jy sigma=0.812923 ! Fit after self-cal, rms=0.124040Jy sigma=0.812859 ! Inverting map ! Your choice of large map pixels excluded 11% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235901 Jy ! Component: 100 - total flux cleaned = 0.0368261 Jy ! Total flux subtracted in 100 components = 0.0368261 Jy ! Clean residual min=-0.009293 max=0.009197 Jy/beam ! Clean residual mean=-0.000005 rms=0.001573 Jy/beam ! Combined flux in latest and established models = 0.306711 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.306711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.119910Jy sigma=0.753391 ! Fit after self-cal, rms=0.119899Jy sigma=0.753299 ! Inverting map ! Your choice of large map pixels excluded 11% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 11% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.6007 mas, bmaj=0.9905 mas, bpa=-0.6857 degrees ! Estimated noise=0.560194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105023 Jy ! Component: 100 - total flux cleaned = 0.0140515 Jy ! Component: 150 - total flux cleaned = 0.0154418 Jy ! Component: 200 - total flux cleaned = 0.0160332 Jy ! Total flux subtracted in 200 components = 0.0160332 Jy ! Clean residual min=-0.006792 max=0.005534 Jy/beam ! Clean residual mean=-0.000005 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.322744 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.322744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.119057Jy sigma=0.744456 ! Fit after self-cal, rms=0.119037Jy sigma=0.744122 ! Inverting map ! Your choice of large map pixels excluded 11% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6007 x 0.9905 at -0.6857 degrees (North through East) ! Clean map min=-0.0050564 max=0.28577 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 EF 1.00* FD 0.98 HH 0.97 ! KP 1.02 LA 1.05 MC 0.99 NL 0.93 ! ON 1.02 PT 0.99 SC 0.92 ZC 0.76 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 0.99 KP 0.98 LA 1.02 ! MK 0.98 NL 0.92 OV 0.99 PT 0.95 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.95 KP 1.02 LA 1.05 ! MK 0.96 NL 0.91 PT 0.95 SC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 1.07 MC 1.00 ON 1.04 ! ZC 0.71 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.01 MC 1.04 SC 0.90 ! ZC 0.76 ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 HH 0.93 MC 1.01 ON 1.32 ! ZC 0.80 ! ! Telescope amplitude corrections in sub-array 9: ! BR 0.96 EF 1.00* FD 1.01 KP 1.05 ! LA 1.05 MC 1.06 NL 0.92 ON 1.05 ! OV 1.00 PT 0.97 SC 0.92 ZC 0.75 ! ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 EF 1.00* FD 1.04 HH 1.01 ! KP 1.02 LA 1.08 MC 1.01 NL 0.96 ! ON 1.00 PT 1.04 SC 0.94 ZC 0.77 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.00 KP 1.00 LA 1.06 ! MK 0.98 NL 0.95 OV 1.04 PT 1.03 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 0.99 KP 0.99 LA 1.07 ! MK 0.98 NL 1.01 PT 0.98 SC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 1.18 MC 1.02 ON 1.14 ! ZC 0.75 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.07 MC 1.08 SC 0.98 ! ZC 0.74 ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HH 1.02 MC 1.03 ON 1.37 ! ZC 0.80 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.02 EF 1.00* FD 1.04 KP 1.03 ! LA 1.07 MC 1.03 NL 0.98 ON 1.06 ! OV 1.01 PT 1.03 SC 0.99 ZC 0.78 ! ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 EF 1.00* FD 1.04 HH 0.97 ! KP 0.98 LA 0.99 MC 0.98 NL 0.93 ! ON 0.98 PT 1.02 SC 1.00 ZC 0.73 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.96 KP 0.93 LA 0.97 ! MK 0.98 NL 0.94 OV 0.98 PT 0.98 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.99 KP 0.95 LA 0.95 ! MK 0.94 NL 0.91 PT 0.98 SC 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 0.97 MC 1.06 ON 1.07 ! ZC 0.75 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.11 MC 1.12 SC 0.96 ! ZC 0.69 ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.05 HH 0.96 MC 1.18 ON 1.29 ! ZC 0.76 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00 EF 1.00* FD 1.04 KP 0.97 ! LA 1.00 MC 1.03 NL 0.96 ON 1.02 ! OV 0.98 PT 1.01 SC 1.00 ZC 0.72 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 EF 1.00* FD 1.00 HH 0.98 ! KP 0.99 LA 0.99 MC 1.02 NL 0.95 ! ON 1.03 PT 1.04 SC 1.00 ZC 0.74 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.97 KP 0.96 LA 1.01 ! MK 0.98 NL 0.97 OV 1.02 PT 1.01 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.99 KP 0.96 LA 1.01 ! MK 0.99 NL 0.98 PT 1.01 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 1.09 MC 1.05 ON 0.98 ! ZC 0.78 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.06 MC 1.04 SC 0.94 ! ZC 0.80 ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.99 HH 0.95 MC 1.10 ON 1.36 ! ZC 0.75 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.01 EF 1.00* FD 1.03 KP 1.01 ! LA 1.02 MC 1.01 NL 0.97 ON 1.07 ! OV 0.99 PT 1.04 SC 1.01 ZC 0.73 ! ! ! Correcting IF 5. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.03 HH 0.97 ! KP 0.89 LA 0.98 MC 1.29 NL 0.99 ! ON 1.23 PT 1.00 SC 0.99 ZC 0.79 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.05 KP 0.86 LA 0.99 ! MK 0.98 NL 0.97 OV 1.08 PT 0.94 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.99 KP 0.88 LA 0.95 ! MK 0.98 NL 0.98 PT 0.95 SC 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 1.04 MC 1.39 ON 1.34 ! ZC 0.75 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.00 MC 1.38 SC 0.91 ! ZC 0.87 ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* HH 0.88 MC 1.30 ON 1.83 ! ZC 0.84 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 1.04 KP 0.92 ! LA 0.98 MC 1.28 NL 0.98 ON 1.32 ! OV 1.08 PT 1.03 SC 1.01 ZC 0.81 ! ! ! Correcting IF 6. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* EF 1.00* FD 1.03 HH 0.94 ! KP 0.90 LA 1.01 MC 1.26 NL 0.98 ! ON 1.30 PT 0.95 SC 0.93 ZC 0.75 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 0.99 KP 0.86 LA 0.98 ! MK 0.99 NL 0.96 OV 1.06 PT 0.93 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.98 KP 0.86 LA 0.96 ! MK 0.96 NL 0.98 PT 0.92 SC 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 1.09 MC 1.19 ON 1.27 ! ZC 0.80 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.06 MC 1.26 SC 0.86 ! ZC 0.87 ! ! A total of 9 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00* HH 1.05 MC 1.41 ON 1.79 ! ZC 0.73 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00* EF 1.00* FD 0.99 KP 0.90 ! LA 1.01 MC 1.37 NL 0.99 ON 1.35 ! OV 1.03 PT 0.95 SC 0.99 ZC 0.78 ! ! ! Correcting IF 7. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 EF 1.00* FD 1.08 HH 1.15 ! KP 0.93 LA 1.06 MC 1.33 NL 1.01 ! ON 1.31 PT 1.00 SC 1.03 ZC 0.60 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.09 KP 0.87 LA 1.02 ! MK 1.05 NL 1.00 OV 1.03 PT 0.97 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.99 KP 0.88 LA 1.04 ! MK 1.02 NL 1.03 PT 0.99 SC 0.99 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 1.21 MC 1.57 ON 1.38 ! ZC 0.55 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.32 MC 1.25 SC 0.93 ! ZC 0.66 ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.98 HH 1.07 MC 1.32 ON 1.73 ! ZC 0.63 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.02 EF 1.00* FD 1.07 KP 0.94 ! LA 1.04 MC 1.48 NL 1.01 ON 1.26 ! OV 0.99 PT 1.04 SC 0.99 ZC 0.63 ! ! ! Correcting IF 8. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! EF 0.00* HH 0.00* MC 0.00* ZC 0.00* ! ! A total of 39 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EF 0.00* MC 0.00* SC 0.00* ZC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 EF 1.00* FD 1.06 HH 1.12 ! KP 0.94 LA 1.05 MC 1.42 NL 0.97 ! ON 1.30 PT 1.03 SC 0.99 ZC 0.57 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.05 KP 0.88 LA 1.04 ! MK 1.06 NL 0.96 OV 1.00 PT 1.00 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.05 KP 0.89 LA 1.02 ! MK 1.11 NL 1.00 PT 0.97 SC 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! EF 1.00* HH 1.13 MC 1.35 ON 1.33 ! ZC 0.55 ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! EF 1.00* HH 1.27 MC 1.35 SC 0.97 ! ZC 0.63 ! ! A total of 15 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.98 HH 1.16 MC 1.55 ON 1.59 ! ZC 0.54 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.01 EF 1.00* FD 1.07 KP 0.92 ! LA 1.03 MC 1.41 NL 1.01 ON 1.27 ! OV 1.00 PT 1.00 SC 1.02 ZC 0.58 ! ! ! Fit before self-cal, rms=0.119037Jy sigma=0.744122 ! Fit after self-cal, rms=0.116125Jy sigma=0.662051 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.6023 mas, bmaj=1.071 mas, bpa=-0.9065 degrees ! Estimated noise=0.566449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124922 Jy ! Component: 100 - total flux cleaned = 0.00104051 Jy ! Component: 150 - total flux cleaned = 0.00119667 Jy ! Component: 200 - total flux cleaned = 0.00126473 Jy ! Total flux subtracted in 200 components = 0.00126473 Jy ! Clean residual min=-0.001972 max=0.001858 Jy/beam ! Clean residual mean=-0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.324009 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.324009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.115939Jy sigma=0.660247 ! Fit after self-cal, rms=0.116654Jy sigma=0.659369 ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.116654Jy sigma=0.659369 ! Fit after self-cal, rms=0.117670Jy sigma=0.657817 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.6034 mas, bmaj=1.073 mas, bpa=-0.936 degrees ! Estimated noise=0.566907 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591875 Jy ! Component: 100 - total flux cleaned = 0.000786752 Jy ! Component: 150 - total flux cleaned = 0.000888382 Jy ! Component: 200 - total flux cleaned = 0.000930111 Jy ! Total flux subtracted in 200 components = 0.000930111 Jy ! Clean residual min=-0.001653 max=0.001823 Jy/beam ! Clean residual mean=-0.000001 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.324939 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.324939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.117607Jy sigma=0.657252 ! Fit after self-cal, rms=0.117651Jy sigma=0.657177 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.4, 34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129515 Jy ! Component: 100 - total flux cleaned = 0.00133747 Jy ! Component: 150 - total flux cleaned = 0.00129535 Jy ! Component: 200 - total flux cleaned = 0.00129545 Jy ! Total flux subtracted in 200 components = 0.00129545 Jy ! Clean residual min=-0.001625 max=0.001636 Jy/beam ! Clean residual mean=-0.000001 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.326235 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.326235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.117608Jy sigma=0.656842 ! Fit after self-cal, rms=0.117604Jy sigma=0.656816 ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Added new window around map position (13.2, 23.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125367 Jy ! Component: 100 - total flux cleaned = 0.00137381 Jy ! Component: 150 - total flux cleaned = 0.00140958 Jy ! Component: 200 - total flux cleaned = 0.00137572 Jy ! Total flux subtracted in 200 components = 0.00137572 Jy ! Clean residual min=-0.001627 max=0.001530 Jy/beam ! Clean residual mean=-0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.32761 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 74 components and 0.32761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.117576Jy sigma=0.656558 ! Fit after self-cal, rms=0.117574Jy sigma=0.656544 ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.117574Jy sigma=0.656544 ! Fit after self-cal, rms=0.118180Jy sigma=0.656436 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.6042 mas, bmaj=1.074 mas, bpa=-0.9384 degrees ! Estimated noise=0.567793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00056136 Jy ! Component: 100 - total flux cleaned = 0.00089802 Jy ! Component: 150 - total flux cleaned = 0.00103043 Jy ! Component: 200 - total flux cleaned = 0.00106148 Jy ! Total flux subtracted in 200 components = 0.00106148 Jy ! Clean residual min=-0.001569 max=0.001494 Jy/beam ! Clean residual mean=-0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.328672 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.328672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.118153Jy sigma=0.656235 ! Fit after self-cal, rms=0.118160Jy sigma=0.656225 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211867 Jy ! Component: 100 - total flux cleaned = 0.000182804 Jy ! Component: 150 - total flux cleaned = 0.000155309 Jy ! Component: 200 - total flux cleaned = 0.000182586 Jy ! Total flux subtracted in 200 components = 0.000182586 Jy ! Clean residual min=-0.001560 max=0.001485 Jy/beam ! Clean residual mean=-0.000001 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.328855 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 82 components and 0.328855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.118144Jy sigma=0.656113 ! Fit after self-cal, rms=0.118140Jy sigma=0.656110 ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.118140Jy sigma=0.656110 ! Fit after self-cal, rms=0.118516Jy sigma=0.656088 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=2.766 mas, bmaj=3.002 mas, bpa=-25.83 degrees ! Estimated noise=0.72189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485649 Jy ! Component: 100 - total flux cleaned = 0.000543355 Jy ! Component: 150 - total flux cleaned = 0.000606594 Jy ! Component: 200 - total flux cleaned = 0.000629573 Jy ! Total flux subtracted in 200 components = 0.000629573 Jy ! Clean residual min=-0.001809 max=0.001523 Jy/beam ! Clean residual mean=-0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.329484 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.329484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.118517Jy sigma=0.656094 ! Fit after self-cal, rms=0.118526Jy sigma=0.656091 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.63714e-05 Jy ! Component: 100 - total flux cleaned = 8.68614e-05 Jy ! Component: 150 - total flux cleaned = 9.74566e-05 Jy ! Component: 200 - total flux cleaned = 0.000107674 Jy ! Total flux subtracted in 200 components = 0.000107674 Jy ! Clean residual min=-0.001800 max=0.001512 Jy/beam ! Clean residual mean=-0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.329592 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.329592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.118526Jy sigma=0.656097 ! Fit after self-cal, rms=0.118528Jy sigma=0.656097 ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.6046 mas, bmaj=1.074 mas, bpa=-0.9452 degrees ! Estimated noise=0.568474 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6046 x 1.074 at -0.9452 degrees (North through East) ! Clean map min=-0.0020516 max=0.28418 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.4909 mas, bmaj=0.9513 mas, bpa=-1.247 degrees ! Estimated noise=1.10849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217395 Jy ! Component: 100 - total flux cleaned = 0.268209 Jy ! Component: 150 - total flux cleaned = 0.29018 Jy ! Component: 200 - total flux cleaned = 0.301538 Jy ! Total flux subtracted in 200 components = 0.301538 Jy ! Clean residual min=-0.003323 max=0.005673 Jy/beam ! Clean residual mean=-0.000004 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.301538 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.301538 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.6046 mas, bmaj=1.074 mas, bpa=-0.9452 degrees ! Estimated noise=0.568474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100169 Jy ! Component: 100 - total flux cleaned = 0.0154446 Jy ! Component: 150 - total flux cleaned = 0.0188441 Jy ! Component: 200 - total flux cleaned = 0.0214102 Jy ! Total flux subtracted in 200 components = 0.0214102 Jy ! Clean residual min=-0.001681 max=0.002172 Jy/beam ! Clean residual mean=-0.000003 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.322948 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.322948 Jy ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Added new window around map position (0.8, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224376 Jy ! Component: 100 - total flux cleaned = 0.00390455 Jy ! Component: 150 - total flux cleaned = 0.0050559 Jy ! Component: 200 - total flux cleaned = 0.00544007 Jy ! Total flux subtracted in 200 components = 0.00544007 Jy ! Clean residual min=-0.001545 max=0.001558 Jy/beam ! Clean residual mean=-0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.328388 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.328388 Jy ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Added new window around map position (26.6, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607472 Jy ! Component: 100 - total flux cleaned = 0.000782111 Jy ! Component: 150 - total flux cleaned = 0.000944917 Jy ! Component: 200 - total flux cleaned = 0.0010965 Jy ! Total flux subtracted in 200 components = 0.0010965 Jy ! Clean residual min=-0.001516 max=0.001426 Jy/beam ! Clean residual mean=-0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.329485 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 52 components and 0.329485 Jy ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=2.766 mas, bmaj=3.002 mas, bpa=-25.83 degrees ! Estimated noise=0.72189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773838 Jy ! Component: 100 - total flux cleaned = 0.000893943 Jy ! Component: 150 - total flux cleaned = 0.000995874 Jy ! Component: 200 - total flux cleaned = 0.00108927 Jy ! Total flux subtracted in 200 components = 0.00108927 Jy ! Clean residual min=-0.001815 max=0.001549 Jy/beam ! Clean residual mean=-0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.330574 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.06176e-05 Jy ! Component: 100 - total flux cleaned = 8.33561e-05 Jy ! Component: 150 - total flux cleaned = 9.58602e-05 Jy ! Component: 200 - total flux cleaned = 0.000108213 Jy ! Total flux subtracted in 200 components = 0.000108213 Jy ! Clean residual min=-0.001804 max=0.001553 Jy/beam ! Clean residual mean=-0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.330682 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 0.330682 Jy ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! Estimated beam: bmin=0.6046 mas, bmaj=1.074 mas, bpa=-0.9452 degrees ! Estimated noise=0.568474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061011 Jy ! Component: 100 - total flux cleaned = -0.000710654 Jy ! Component: 150 - total flux cleaned = -0.000773828 Jy ! Component: 200 - total flux cleaned = -0.000775094 Jy ! Total flux subtracted in 200 components = -0.000775094 Jy ! Clean residual min=-0.001489 max=0.001442 Jy/beam ! Clean residual mean=-0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.329907 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 87 components and 0.329907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.118468Jy sigma=0.655677 ! Fit after self-cal, rms=0.118429Jy sigma=0.655615 wmodel /scr/pima/gb073_uvs/J0112+2020_X_map.mod ! Writing 87 model components to file: /scr/pima/gb073_uvs/J0112+2020_X_map.mod wobs /scr/pima/gb073_uvs/J0112+2020_X_uvs.fits ! Writing UV FITS file: /scr/pima/gb073_uvs/J0112+2020_X_uvs.fits wwins /scr/pima/gb073_uvs/J0112+2020_X_map.win ! wwins: Wrote 7 windows to /scr/pima/gb073_uvs/J0112+2020_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396472 Jy ! Component: 100 - total flux cleaned = -0.00068409 Jy ! Component: 150 - total flux cleaned = -0.000862026 Jy ! Component: 200 - total flux cleaned = -0.000911827 Jy ! Component: 250 - total flux cleaned = -0.00105851 Jy ! Component: 300 - total flux cleaned = -0.00108219 Jy ! Component: 350 - total flux cleaned = -0.00112917 Jy ! Component: 400 - total flux cleaned = -0.00117567 Jy ! Component: 450 - total flux cleaned = -0.00124461 Jy ! Component: 500 - total flux cleaned = -0.00128987 Jy ! Component: 550 - total flux cleaned = -0.00128963 Jy ! Component: 600 - total flux cleaned = -0.00128918 Jy ! Component: 650 - total flux cleaned = -0.00126722 Jy ! Component: 700 - total flux cleaned = -0.00122377 Jy ! Component: 750 - total flux cleaned = -0.00122349 Jy ! Component: 800 - total flux cleaned = -0.00113903 Jy ! Component: 850 - total flux cleaned = -0.00111823 Jy ! Component: 900 - total flux cleaned = -0.00111821 Jy ! Component: 950 - total flux cleaned = -0.00109768 Jy ! Component: 1000 - total flux cleaned = -0.00107695 Jy ! Component: 1050 - total flux cleaned = -0.00103656 Jy ! Component: 1100 - total flux cleaned = -0.00101657 Jy ! Component: 1150 - total flux cleaned = -0.000976546 Jy ! Component: 1200 - total flux cleaned = -0.000897084 Jy ! Component: 1250 - total flux cleaned = -0.000778907 Jy ! Component: 1300 - total flux cleaned = -0.000720146 Jy ! Component: 1350 - total flux cleaned = -0.000700852 Jy ! Component: 1400 - total flux cleaned = -0.000662141 Jy ! Component: 1450 - total flux cleaned = -0.000546797 Jy ! Component: 1500 - total flux cleaned = -0.000565834 Jy ! Component: 1550 - total flux cleaned = -0.000413928 Jy ! Component: 1600 - total flux cleaned = -0.000395104 Jy ! Component: 1650 - total flux cleaned = -0.000320067 Jy ! Component: 1700 - total flux cleaned = -0.000338561 Jy ! Component: 1750 - total flux cleaned = -0.000282823 Jy ! Component: 1800 - total flux cleaned = -0.000264388 Jy ! Component: 1850 - total flux cleaned = -0.00017263 Jy ! Component: 1900 - total flux cleaned = -0.000191035 Jy ! Component: 1950 - total flux cleaned = -0.000191173 Jy ! Component: 2000 - total flux cleaned = -0.000155205 Jy ! Component: 2050 - total flux cleaned = -0.000173125 Jy ! Component: 2100 - total flux cleaned = -0.000190965 Jy ! Component: 2150 - total flux cleaned = -0.000137531 Jy ! Component: 2200 - total flux cleaned = -0.00024363 Jy ! Component: 2250 - total flux cleaned = -0.000138026 Jy ! Component: 2300 - total flux cleaned = -0.000155541 Jy ! Component: 2350 - total flux cleaned = -0.000103154 Jy ! Component: 2400 - total flux cleaned = -6.84413e-05 Jy ! Component: 2450 - total flux cleaned = -0.00013759 Jy ! Component: 2500 - total flux cleaned = -8.59544e-05 Jy ! Component: 2550 - total flux cleaned = 1.66356e-05 Jy ! Component: 2600 - total flux cleaned = -6.85679e-05 Jy ! Component: 2650 - total flux cleaned = -1.79034e-05 Jy ! Component: 2700 - total flux cleaned = -1.79595e-05 Jy ! Component: 2750 - total flux cleaned = -3.48052e-05 Jy ! Component: 2800 - total flux cleaned = -1.82186e-05 Jy ! Component: 2850 - total flux cleaned = -1.82891e-05 Jy ! Component: 2900 - total flux cleaned = -1.81719e-05 Jy ! Component: 2950 - total flux cleaned = 1.49034e-05 Jy ! Component: 3000 - total flux cleaned = 8.07776e-05 Jy ! Component: 3050 - total flux cleaned = 4.79475e-05 Jy ! Component: 3100 - total flux cleaned = -1.73673e-05 Jy ! Component: 3150 - total flux cleaned = -4.97793e-05 Jy ! Component: 3200 - total flux cleaned = -1.72966e-05 Jy ! Component: 3250 - total flux cleaned = -3.34821e-05 Jy ! Component: 3300 - total flux cleaned = -3.3422e-05 Jy ! Component: 3350 - total flux cleaned = -1.48852e-06 Jy ! Component: 3400 - total flux cleaned = 3.02318e-05 Jy ! Component: 3450 - total flux cleaned = 4.61293e-05 Jy ! Component: 3500 - total flux cleaned = -3.30539e-05 Jy ! Component: 3550 - total flux cleaned = -3.29939e-05 Jy ! Component: 3600 - total flux cleaned = -0.000111633 Jy ! Component: 3650 - total flux cleaned = -0.000142941 Jy ! Component: 3700 - total flux cleaned = -0.000142967 Jy ! Component: 3750 - total flux cleaned = -6.51234e-05 Jy ! Component: 3800 - total flux cleaned = -9.61527e-05 Jy ! Component: 3850 - total flux cleaned = -6.53811e-05 Jy ! Component: 3900 - total flux cleaned = -0.000111615 Jy ! Component: 3950 - total flux cleaned = -9.61988e-05 Jy ! Component: 4000 - total flux cleaned = -0.000111389 Jy ! Component: 4050 - total flux cleaned = -0.00015708 Jy ! Total flux subtracted in 4096 components = -0.000156994 Jy ! Clean residual min=-0.000996 max=0.000811 Jy/beam ! Clean residual mean=-0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.32975 Jy keep ! Adding 340 model components to the UV plane model. ! The established model now contains 427 components and 0.32975 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gb073_uvs/J0112+2020_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6046 x 1.074 at -0.9452 degrees (North through East) ! Clean map min=-0.001089 max=0.28394 Jy/beam ! Writing clean map to FITS file: /scr/pima/gb073_uvs/J0112+2020_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.283941 invert ! Inverting map ! Your choice of large map pixels excluded 11.6% of the data. ! The x-axis pixel size should ideally be below 0.1669 milli-arcsec ! The y-axis pixel size should ideally be below 0.1977 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247018 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.260989 0.260989 0.521977 1.04395 2.08791 4.17582 8.35164 16.7033 33.4066 66.8131 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.283 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1149.47 quit ! Quitting program ! Log file /scr/pima/gb073_uvs/J0112+2020_X_uvs.log closed on Sat Dec 26 09:31:20 2015