! Started logfile: /scr/pima/bu007_uvs/J1708+3346_C_dfm.log on Sun Jun 24 02:29:10 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1708+3346_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1708+3346_C_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955062 visibilities/baseline/integration-bin.
! Found source: J1708+3346
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15472 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1708+3346_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011971Jy  sigma=16.349967
! Fit after  self-cal, rms=0.897401Jy  sigma=14.510126
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.141 mas, bmaj=3.161 mas, bpa=7.919 degrees
! Estimated noise=0.59547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0835287 Jy
! Component: 100  -  total flux cleaned = 0.101743 Jy
! Total flux subtracted in 100 components = 0.101743 Jy
! Clean residual min=-0.003558 max=0.005083 Jy/beam
! Clean residual mean=-0.000001 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.101743 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.101743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093914Jy  sigma=1.337659
! Fit after  self-cal, rms=0.093814Jy  sigma=1.336124
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431373 Jy
! Component: 100  -  total flux cleaned = 0.00620092 Jy
! Total flux subtracted in 100 components = 0.00620092 Jy
! Clean residual min=-0.003286 max=0.003069 Jy/beam
! Clean residual mean=-0.000000 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.107944 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.107944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093614Jy  sigma=1.332849
! Fit after  self-cal, rms=0.093615Jy  sigma=1.332832
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.363 mas, bmaj=3.497 mas, bpa=6.039 degrees
! Estimated noise=0.369911 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163006 Jy
! Component: 100  -  total flux cleaned = 0.00252335 Jy
! Component: 150  -  total flux cleaned = 0.00305852 Jy
! Component: 200  -  total flux cleaned = 0.00323034 Jy
! Total flux subtracted in 200 components = 0.00323034 Jy
! Clean residual min=-0.001807 max=0.001809 Jy/beam
! Clean residual mean=0.000001 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.111175 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 23 components and 0.111175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093583Jy  sigma=1.332408
! Fit after  self-cal, rms=0.093576Jy  sigma=1.332389
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.363 x 3.497 at 6.039 degrees (North through East)
! Clean map  min=-0.0017188  max=0.10711 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.90     HN        0.97     KP        0.99     
!   LA        1.05     MK        0.95     NL        1.03     OV        0.98     
!   PT        1.05     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.00     
!   LA        0.99     MK        0.96     NL        0.93     OV        1.01     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.02     
!   LA        1.05     MK        1.00     NL        1.05     OV        0.96     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.05     KP        1.06     
!   LA        0.97     MK        1.08     NL        1.02     OV        1.03     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.95     KP        1.07     
!   LA        0.93     MK        0.96     NL        0.97     OV        1.00     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.94     KP        1.04     
!   LA        0.96     MK        1.06     NL        1.02     OV        1.04     
!   PT        1.08     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        0.99     
!   LA        0.97     MK        1.01     NL        0.99     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        0.96     KP        0.96     
!   LA        1.02     MK        1.02     NL        0.98     OV        1.05     
!   PT        1.02     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.093576Jy  sigma=1.332389
! Fit after  self-cal, rms=0.093320Jy  sigma=1.329085
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.363 mas, bmaj=3.497 mas, bpa=6 degrees
! Estimated noise=0.370695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439627 Jy
! Component: 100  -  total flux cleaned = 0.000526856 Jy
! Component: 150  -  total flux cleaned = 0.000562579 Jy
! Component: 200  -  total flux cleaned = 0.000594521 Jy
! Total flux subtracted in 200 components = 0.000594521 Jy
! Clean residual min=-0.001966 max=0.001850 Jy/beam
! Clean residual mean=0.000002 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.111769 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.111769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093316Jy  sigma=1.329048
! Fit after  self-cal, rms=0.093299Jy  sigma=1.328953
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093299Jy  sigma=1.328953
! Fit after  self-cal, rms=0.092988Jy  sigma=1.326894
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.363 mas, bmaj=3.495 mas, bpa=6.03 degrees
! Estimated noise=0.371301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000342065 Jy
! Component: 100  -  total flux cleaned = 0.000461473 Jy
! Component: 150  -  total flux cleaned = 0.000489358 Jy
! Component: 200  -  total flux cleaned = 0.000502104 Jy
! Total flux subtracted in 200 components = 0.000502104 Jy
! Clean residual min=-0.001953 max=0.001852 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.112271 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.112271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092986Jy  sigma=1.326877
! Fit after  self-cal, rms=0.092983Jy  sigma=1.326828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.56868e-05 Jy
! Component: 100  -  total flux cleaned = 4.21023e-05 Jy
! Component: 150  -  total flux cleaned = 4.17414e-05 Jy
! Component: 200  -  total flux cleaned = 4.16565e-05 Jy
! Total flux subtracted in 200 components = 4.16565e-05 Jy
! Clean residual min=-0.001958 max=0.001846 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.112313 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 35 components and 0.112313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092981Jy  sigma=1.326821
! Fit after  self-cal, rms=0.092982Jy  sigma=1.326818
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092982Jy  sigma=1.326818
! Fit after  self-cal, rms=0.092883Jy  sigma=1.326750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.362 mas, bmaj=3.491 mas, bpa=6.03 degrees
! Estimated noise=0.371383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000202784 Jy
! Component: 100  -  total flux cleaned = 0.000255784 Jy
! Component: 150  -  total flux cleaned = 0.000296516 Jy
! Component: 200  -  total flux cleaned = 0.000321568 Jy
! Total flux subtracted in 200 components = 0.000321568 Jy
! Clean residual min=-0.001963 max=0.001853 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.112635 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 35 components and 0.112635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092881Jy  sigma=1.326740
! Fit after  self-cal, rms=0.092880Jy  sigma=1.326735
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.63423e-06 Jy
! Component: 100  -  total flux cleaned = -7.94436e-06 Jy
! Component: 150  -  total flux cleaned = -2.00705e-06 Jy
! Component: 200  -  total flux cleaned = -7.64331e-06 Jy
! Total flux subtracted in 200 components = -7.64331e-06 Jy
! Clean residual min=-0.001964 max=0.001851 Jy/beam
! Clean residual mean=0.000002 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.112627 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.112627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092879Jy  sigma=1.326725
! Fit after  self-cal, rms=0.092879Jy  sigma=1.326726
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092879Jy  sigma=1.326726
! Fit after  self-cal, rms=0.092873Jy  sigma=1.326723
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.48 mas, bmaj=4.811 mas, bpa=4.481 degrees
! Estimated noise=0.514281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119152 Jy
! Component: 100  -  total flux cleaned = 0.000155237 Jy
! Component: 150  -  total flux cleaned = 0.000191966 Jy
! Component: 200  -  total flux cleaned = 0.000210069 Jy
! Total flux subtracted in 200 components = 0.000210069 Jy
! Clean residual min=-0.002164 max=0.002510 Jy/beam
! Clean residual mean=0.000004 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.112837 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 40 components and 0.112837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092872Jy  sigma=1.326739
! Fit after  self-cal, rms=0.092875Jy  sigma=1.326737
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.12296e-05 Jy
! Component: 100  -  total flux cleaned = 5.87547e-06 Jy
! Component: 150  -  total flux cleaned = 2.06725e-05 Jy
! Component: 200  -  total flux cleaned = 2.9676e-05 Jy
! Total flux subtracted in 200 components = 2.9676e-05 Jy
! Clean residual min=-0.002165 max=0.002513 Jy/beam
! Clean residual mean=0.000004 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.112867 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 42 components and 0.112867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092874Jy  sigma=1.326753
! Fit after  self-cal, rms=0.092875Jy  sigma=1.326750
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=3.488 mas, bpa=6.037 degrees
! Estimated noise=0.371473 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.361 x 3.488 at 6.037 degrees (North through East)
! Clean map  min=-0.0018535  max=0.10745 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.14 mas, bmaj=3.159 mas, bpa=7.821 degrees
! Estimated noise=0.596475 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0836906 Jy
! Component: 100  -  total flux cleaned = 0.101941 Jy
! Component: 150  -  total flux cleaned = 0.106288 Jy
! Component: 200  -  total flux cleaned = 0.108281 Jy
! Total flux subtracted in 200 components = 0.108281 Jy
! Clean residual min=-0.002891 max=0.002871 Jy/beam
! Clean residual mean=-0.000000 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.108281 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.108281 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=3.488 mas, bpa=6.037 degrees
! Estimated noise=0.371473 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198049 Jy
! Component: 100  -  total flux cleaned = 0.00312148 Jy
! Component: 150  -  total flux cleaned = 0.00380306 Jy
! Component: 200  -  total flux cleaned = 0.00421016 Jy
! Total flux subtracted in 200 components = 0.00421016 Jy
! Clean residual min=-0.001991 max=0.001854 Jy/beam
! Clean residual mean=0.000002 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.112491 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.112491 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.48 mas, bmaj=4.811 mas, bpa=4.481 degrees
! Estimated noise=0.514281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000245602 Jy
! Component: 100  -  total flux cleaned = 0.000289917 Jy
! Component: 150  -  total flux cleaned = 0.000326797 Jy
! Component: 200  -  total flux cleaned = 0.0003427 Jy
! Total flux subtracted in 200 components = 0.0003427 Jy
! Clean residual min=-0.002180 max=0.002503 Jy/beam
! Clean residual mean=0.000004 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.112834 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.93781e-06 Jy
! Component: 100  -  total flux cleaned = 1.32424e-05 Jy
! Component: 150  -  total flux cleaned = 1.93356e-05 Jy
! Component: 200  -  total flux cleaned = 2.49883e-05 Jy
! Total flux subtracted in 200 components = 2.49883e-05 Jy
! Clean residual min=-0.002173 max=0.002506 Jy/beam
! Clean residual mean=0.000004 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.112859 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 27 components and 0.112859 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=3.488 mas, bpa=6.037 degrees
! Estimated noise=0.371473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.04353e-05 Jy
! Component: 100  -  total flux cleaned = 6.29148e-05 Jy
! Component: 150  -  total flux cleaned = 6.2923e-05 Jy
! Component: 200  -  total flux cleaned = 7.21362e-05 Jy
! Total flux subtracted in 200 components = 7.21362e-05 Jy
! Clean residual min=-0.001985 max=0.001848 Jy/beam
! Clean residual mean=0.000002 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.112931 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.112931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092873Jy  sigma=1.326751
! Fit after  self-cal, rms=0.092872Jy  sigma=1.326745
wmodel J1708+3346_C_map.mod
! Writing 38 model components to file: J1708+3346_C_map.mod
wobs   J1708+3346_C_uvs.fits
! Writing UV FITS file: J1708+3346_C_uvs.fits
wwins  J1708+3346_C_map.win
! wwins: Wrote 1 windows to J1708+3346_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000217854 Jy
! Component: 100  -  total flux cleaned = -0.000281033 Jy
! Component: 150  -  total flux cleaned = -0.000219922 Jy
! Component: 200  -  total flux cleaned = -0.000190776 Jy
! Component: 250  -  total flux cleaned = -7.67142e-05 Jy
! Component: 300  -  total flux cleaned = 6.57403e-06 Jy
! Component: 350  -  total flux cleaned = 3.34784e-05 Jy
! Component: 400  -  total flux cleaned = -1.99035e-05 Jy
! Component: 450  -  total flux cleaned = 7.18624e-06 Jy
! Component: 500  -  total flux cleaned = 8.47233e-05 Jy
! Component: 550  -  total flux cleaned = 3.31531e-05 Jy
! Component: 600  -  total flux cleaned = 3.29782e-05 Jy
! Component: 650  -  total flux cleaned = 8.26251e-05 Jy
! Component: 700  -  total flux cleaned = 0.000155766 Jy
! Component: 750  -  total flux cleaned = 0.000131508 Jy
! Component: 800  -  total flux cleaned = 0.000131315 Jy
! Component: 850  -  total flux cleaned = 0.000131076 Jy
! Component: 900  -  total flux cleaned = 0.000130578 Jy
! Component: 950  -  total flux cleaned = 8.42742e-05 Jy
! Component: 1000  -  total flux cleaned = 6.12861e-05 Jy
! Component: 1050  -  total flux cleaned = 8.369e-05 Jy
! Component: 1100  -  total flux cleaned = 8.39697e-05 Jy
! Component: 1150  -  total flux cleaned = 1.76386e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000105458 Jy
! Component: 1250  -  total flux cleaned = 1.86067e-05 Jy
! Component: 1300  -  total flux cleaned = 3.99577e-05 Jy
! Component: 1350  -  total flux cleaned = 0.000124844 Jy
! Component: 1400  -  total flux cleaned = 4.00579e-05 Jy
! Component: 1450  -  total flux cleaned = 6.12006e-05 Jy
! Component: 1500  -  total flux cleaned = 0.000143947 Jy
! Component: 1550  -  total flux cleaned = 0.00014396 Jy
! Component: 1600  -  total flux cleaned = 0.000164153 Jy
! Component: 1650  -  total flux cleaned = 0.00014403 Jy
! Component: 1700  -  total flux cleaned = 0.000224117 Jy
! Component: 1750  -  total flux cleaned = 0.000204262 Jy
! Component: 1800  -  total flux cleaned = 0.00010569 Jy
! Component: 1850  -  total flux cleaned = 0.000242697 Jy
! Component: 1900  -  total flux cleaned = 0.000204156 Jy
! Component: 1950  -  total flux cleaned = 0.000242569 Jy
! Component: 2000  -  total flux cleaned = 0.000166068 Jy
! Component: 2050  -  total flux cleaned = 0.000223086 Jy
! Component: 2100  -  total flux cleaned = 0.000204298 Jy
! Component: 2150  -  total flux cleaned = 0.000185559 Jy
! Component: 2200  -  total flux cleaned = 0.00014865 Jy
! Component: 2250  -  total flux cleaned = 0.000130131 Jy
! Component: 2300  -  total flux cleaned = 0.000148651 Jy
! Component: 2350  -  total flux cleaned = 7.57927e-05 Jy
! Component: 2400  -  total flux cleaned = 7.57776e-05 Jy
! Component: 2450  -  total flux cleaned = 5.78961e-05 Jy
! Component: 2500  -  total flux cleaned = 4.25344e-06 Jy
! Component: 2550  -  total flux cleaned = 2.20711e-05 Jy
! Component: 2600  -  total flux cleaned = -3.0605e-05 Jy
! Component: 2650  -  total flux cleaned = -1.30756e-05 Jy
! Component: 2700  -  total flux cleaned = -4.75749e-05 Jy
! Component: 2750  -  total flux cleaned = -6.47797e-05 Jy
! Component: 2800  -  total flux cleaned = -0.00011598 Jy
! Component: 2850  -  total flux cleaned = -0.000132944 Jy
! Component: 2900  -  total flux cleaned = -0.00013303 Jy
! Component: 2950  -  total flux cleaned = -0.000149907 Jy
! Component: 3000  -  total flux cleaned = -0.000166759 Jy
! Component: 3050  -  total flux cleaned = -0.000166818 Jy
! Component: 3100  -  total flux cleaned = -0.00023283 Jy
! Component: 3150  -  total flux cleaned = -0.000249141 Jy
! Component: 3200  -  total flux cleaned = -0.000265367 Jy
! Component: 3250  -  total flux cleaned = -0.000346451 Jy
! Component: 3300  -  total flux cleaned = -0.000314197 Jy
! Component: 3350  -  total flux cleaned = -0.000314093 Jy
! Component: 3400  -  total flux cleaned = -0.000330091 Jy
! Component: 3450  -  total flux cleaned = -0.000377574 Jy
! Component: 3500  -  total flux cleaned = -0.000456533 Jy
! Component: 3550  -  total flux cleaned = -0.000472198 Jy
! Component: 3600  -  total flux cleaned = -0.000534611 Jy
! Component: 3650  -  total flux cleaned = -0.000503967 Jy
! Component: 3700  -  total flux cleaned = -0.000627524 Jy
! Component: 3750  -  total flux cleaned = -0.000642882 Jy
! Component: 3800  -  total flux cleaned = -0.000642838 Jy
! Component: 3850  -  total flux cleaned = -0.000688393 Jy
! Component: 3900  -  total flux cleaned = -0.000748887 Jy
! Component: 3950  -  total flux cleaned = -0.000779081 Jy
! Component: 4000  -  total flux cleaned = -0.000838922 Jy
! Component: 4050  -  total flux cleaned = -0.000838871 Jy
! Total flux subtracted in 4096 components = -0.000809116 Jy
! Clean residual min=-0.000787 max=0.000758 Jy/beam
! Clean residual mean=-0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.112122 Jy
keep
! Adding 331 model components to the UV plane model.
! The established model now contains 369 components and 0.112122 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1708+3346_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.361 x 3.488 at 6.037 degrees (North through East)
! Clean map  min=-0.001475  max=0.10746 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1708+3346_C_map.fits
wmodel /scr/pima/bu007_uvs/J1708+3346_C_map.mod
! Writing 369 model components to file: /scr/pima/bu007_uvs/J1708+3346_C_map.mod
wobs   /scr/pima/bu007_uvs/J1708+3346_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1708+3346_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1708+3346_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J1708+3346_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.107462 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270938 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.75637 0.75637 1.51274 3.02548 6.05096 12.1019 24.2038 48.4077 96.8154
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  396.631 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1708+3346_C_dfm.log closed on Sun Jun 24 02:29:14 2018