! Started logfile: /scr/pima/bu007_uvs/J1653+3107_C_dfm.log on Sun Jun 24 02:29:05 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1653+3107_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1653+3107_C_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.881481 visibilities/baseline/integration-bin.
! Found source: J1653+3107
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15232 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1653+3107_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.065805Jy  sigma=15.569306
! Fit after  self-cal, rms=0.646912Jy  sigma=9.471181
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=3.179 mas, bpa=2.973 degrees
! Estimated noise=0.71669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.271164 Jy
! Component: 100  -  total flux cleaned = 0.331585 Jy
! Total flux subtracted in 100 components = 0.331585 Jy
! Clean residual min=-0.007380 max=0.020431 Jy/beam
! Clean residual mean=-0.000007 rms=0.001772 Jy/beam
! Combined flux in latest and established models = 0.331585 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.331585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102409Jy  sigma=1.375192
! Fit after  self-cal, rms=0.102397Jy  sigma=1.375058
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221705 Jy
! Component: 100  -  total flux cleaned = 0.0332743 Jy
! Total flux subtracted in 100 components = 0.0332743 Jy
! Clean residual min=-0.005327 max=0.012673 Jy/beam
! Clean residual mean=-0.000003 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.36486 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.36486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095929Jy  sigma=1.278087
! Fit after  self-cal, rms=0.095899Jy  sigma=1.277924
! Inverting map 
! Added new window around map position (3.6, 0.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110496 Jy
! Component: 100  -  total flux cleaned = 0.0170536 Jy
! Total flux subtracted in 100 components = 0.0170536 Jy
! Clean residual min=-0.004620 max=0.006854 Jy/beam
! Clean residual mean=-0.000002 rms=0.001081 Jy/beam
! Combined flux in latest and established models = 0.381913 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.381913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.094038Jy  sigma=1.249822
! Fit after  self-cal, rms=0.093907Jy  sigma=1.248062
! Inverting map 
! Added new window around map position (2.1, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00670685 Jy
! Component: 100  -  total flux cleaned = 0.00990274 Jy
! Total flux subtracted in 100 components = 0.00990274 Jy
! Clean residual min=-0.004181 max=0.004272 Jy/beam
! Clean residual mean=-0.000001 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.391816 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.391816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093244Jy  sigma=1.237573
! Fit after  self-cal, rms=0.093212Jy  sigma=1.237056
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.323 mas, bmaj=3.653 mas, bpa=1.245 degrees
! Estimated noise=0.418538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00599727 Jy
! Component: 100  -  total flux cleaned = 0.00969268 Jy
! Component: 150  -  total flux cleaned = 0.0121649 Jy
! Component: 200  -  total flux cleaned = 0.0139196 Jy
! Total flux subtracted in 200 components = 0.0139196 Jy
! Clean residual min=-0.002479 max=0.002766 Jy/beam
! Clean residual mean=-0.000001 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.405736 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 56 components and 0.405736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092768Jy  sigma=1.230601
! Fit after  self-cal, rms=0.092747Jy  sigma=1.230286
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.323 x 3.653 at 1.245 degrees (North through East)
! Clean map  min=-0.0023378  max=0.35367 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.02     KP        1.00     
!   LA        1.02     MK        1.03     NL        1.02     OV        1.03     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.01     KP        0.99     
!   LA        1.03     MK        1.01     NL        1.01     OV        1.01     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.04     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        0.97     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        0.98     
!   LA        1.00     MK        0.99     NL        0.97     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.97     KP        0.95     
!   LA        0.99     MK        1.02     NL        0.96     OV        0.97     
!   PT        1.02     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.092747Jy  sigma=1.230286
! Fit after  self-cal, rms=0.091910Jy  sigma=1.222105
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.326 mas, bmaj=3.653 mas, bpa=1.202 degrees
! Estimated noise=0.418486 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000602357 Jy
! Component: 100  -  total flux cleaned = 0.000648972 Jy
! Component: 150  -  total flux cleaned = 0.000682817 Jy
! Component: 200  -  total flux cleaned = 0.000682361 Jy
! Total flux subtracted in 200 components = 0.000682361 Jy
! Clean residual min=-0.002005 max=0.002575 Jy/beam
! Clean residual mean=-0.000003 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.406418 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 0.406418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091869Jy  sigma=1.221525
! Fit after  self-cal, rms=0.091859Jy  sigma=1.221463
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091859Jy  sigma=1.221463
! Fit after  self-cal, rms=0.091881Jy  sigma=1.219084
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.328 mas, bmaj=3.653 mas, bpa=1.252 degrees
! Estimated noise=0.41857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000112561 Jy
! Component: 100  -  total flux cleaned = -5.62149e-05 Jy
! Component: 150  -  total flux cleaned = -6.79427e-06 Jy
! Component: 200  -  total flux cleaned = -6.96196e-06 Jy
! Total flux subtracted in 200 components = -6.96196e-06 Jy
! Clean residual min=-0.002033 max=0.002454 Jy/beam
! Clean residual mean=-0.000003 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.406411 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.406411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091862Jy  sigma=1.218805
! Fit after  self-cal, rms=0.091864Jy  sigma=1.218767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (50.7, 43.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233948 Jy
! Component: 100  -  total flux cleaned = 0.00370209 Jy
! Component: 150  -  total flux cleaned = 0.00425494 Jy
! Component: 200  -  total flux cleaned = 0.00441783 Jy
! Total flux subtracted in 200 components = 0.00441783 Jy
! Clean residual min=-0.002040 max=0.002296 Jy/beam
! Clean residual mean=-0.000003 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.410829 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 92 components and 0.410829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091790Jy  sigma=1.217801
! Fit after  self-cal, rms=0.091785Jy  sigma=1.217744
! Inverting map 
! Added new window around map position (69, -21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190471 Jy
! Component: 100  -  total flux cleaned = 0.00275089 Jy
! Component: 150  -  total flux cleaned = 0.00335557 Jy
! Component: 200  -  total flux cleaned = 0.00380014 Jy
! Total flux subtracted in 200 components = 0.00380014 Jy
! Clean residual min=-0.001964 max=0.002089 Jy/beam
! Clean residual mean=-0.000002 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.414629 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 107 components and 0.414629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091739Jy  sigma=1.217020
! Fit after  self-cal, rms=0.091738Jy  sigma=1.216985
! Inverting map 
! Added new window around map position (-23.1, -66.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204448 Jy
! Component: 100  -  total flux cleaned = 0.00259039 Jy
! Component: 150  -  total flux cleaned = 0.00287545 Jy
! Component: 200  -  total flux cleaned = 0.00310134 Jy
! Total flux subtracted in 200 components = 0.00310134 Jy
! Clean residual min=-0.001969 max=0.001745 Jy/beam
! Clean residual mean=-0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.41773 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 128 components and 0.41773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091681Jy  sigma=1.216245
! Fit after  self-cal, rms=0.091677Jy  sigma=1.216188
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091677Jy  sigma=1.216188
! Fit after  self-cal, rms=0.091631Jy  sigma=1.215977
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.328 mas, bmaj=3.652 mas, bpa=1.28 degrees
! Estimated noise=0.418589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000743283 Jy
! Component: 100  -  total flux cleaned = 0.00114254 Jy
! Component: 150  -  total flux cleaned = 0.00138299 Jy
! Component: 200  -  total flux cleaned = 0.00158088 Jy
! Total flux subtracted in 200 components = 0.00158088 Jy
! Clean residual min=-0.002015 max=0.001695 Jy/beam
! Clean residual mean=-0.000002 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.419311 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 138 components and 0.419311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091608Jy  sigma=1.215686
! Fit after  self-cal, rms=0.091607Jy  sigma=1.215672
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310508 Jy
! Component: 100  -  total flux cleaned = 0.000524776 Jy
! Component: 150  -  total flux cleaned = 0.000677799 Jy
! Component: 200  -  total flux cleaned = 0.000824101 Jy
! Total flux subtracted in 200 components = 0.000824101 Jy
! Clean residual min=-0.002026 max=0.001691 Jy/beam
! Clean residual mean=-0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.420135 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 143 components and 0.420135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091593Jy  sigma=1.215494
! Fit after  self-cal, rms=0.091593Jy  sigma=1.215492
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091593Jy  sigma=1.215492
! Fit after  self-cal, rms=0.091561Jy  sigma=1.215464
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.503 mas, bmaj=5.233 mas, bpa=-1.146 degrees
! Estimated noise=0.58908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013785 Jy
! Component: 100  -  total flux cleaned = 0.00222056 Jy
! Component: 150  -  total flux cleaned = 0.00267891 Jy
! Component: 200  -  total flux cleaned = 0.00286614 Jy
! Total flux subtracted in 200 components = 0.00286614 Jy
! Clean residual min=-0.002184 max=0.002320 Jy/beam
! Clean residual mean=-0.000004 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.423001 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 155 components and 0.423001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091561Jy  sigma=1.215489
! Fit after  self-cal, rms=0.091558Jy  sigma=1.215462
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000295067 Jy
! Component: 100  -  total flux cleaned = 0.000456354 Jy
! Component: 150  -  total flux cleaned = 0.000493348 Jy
! Component: 200  -  total flux cleaned = 0.00056053 Jy
! Total flux subtracted in 200 components = 0.00056053 Jy
! Clean residual min=-0.002129 max=0.002239 Jy/beam
! Clean residual mean=-0.000003 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.423562 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 161 components and 0.423562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091559Jy  sigma=1.215504
! Fit after  self-cal, rms=0.091559Jy  sigma=1.215502
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.329 mas, bmaj=3.652 mas, bpa=1.286 degrees
! Estimated noise=0.418571 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.329 x 3.652 at 1.286 degrees (North through East)
! Clean map  min=-0.0019287  max=0.35318 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=3.174 mas, bpa=3.085 degrees
! Estimated noise=0.721612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.272785 Jy
! Component: 100  -  total flux cleaned = 0.333281 Jy
! Component: 150  -  total flux cleaned = 0.355825 Jy
! Component: 200  -  total flux cleaned = 0.369548 Jy
! Total flux subtracted in 200 components = 0.369548 Jy
! Clean residual min=-0.004424 max=0.007493 Jy/beam
! Clean residual mean=-0.000005 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.369548 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.369548 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.329 mas, bmaj=3.652 mas, bpa=1.286 degrees
! Estimated noise=0.418571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131826 Jy
! Component: 100  -  total flux cleaned = 0.0212199 Jy
! Component: 150  -  total flux cleaned = 0.0263673 Jy
! Component: 200  -  total flux cleaned = 0.0302231 Jy
! Total flux subtracted in 200 components = 0.0302231 Jy
! Clean residual min=-0.002315 max=0.002962 Jy/beam
! Clean residual mean=-0.000004 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.399772 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.399772 Jy
! Inverting map 
! Added new window around map position (5.1, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033623 Jy
! Component: 100  -  total flux cleaned = 0.00614067 Jy
! Component: 150  -  total flux cleaned = 0.00852962 Jy
! Component: 200  -  total flux cleaned = 0.0105991 Jy
! Total flux subtracted in 200 components = 0.0105991 Jy
! Clean residual min=-0.002169 max=0.001980 Jy/beam
! Clean residual mean=-0.000003 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.410371 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 53 components and 0.410371 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.503 mas, bmaj=5.233 mas, bpa=-1.146 degrees
! Estimated noise=0.58908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00329525 Jy
! Component: 100  -  total flux cleaned = 0.00543666 Jy
! Component: 150  -  total flux cleaned = 0.00709157 Jy
! Component: 200  -  total flux cleaned = 0.00842996 Jy
! Total flux subtracted in 200 components = 0.00842996 Jy
! Clean residual min=-0.002293 max=0.002444 Jy/beam
! Clean residual mean=-0.000005 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.418801 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112391 Jy
! Component: 100  -  total flux cleaned = 0.00208194 Jy
! Component: 150  -  total flux cleaned = 0.00284188 Jy
! Component: 200  -  total flux cleaned = 0.00339329 Jy
! Total flux subtracted in 200 components = 0.00339329 Jy
! Clean residual min=-0.002185 max=0.002394 Jy/beam
! Clean residual mean=-0.000003 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.422194 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 98 components and 0.422194 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.329 mas, bmaj=3.652 mas, bpa=1.286 degrees
! Estimated noise=0.418571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0003272 Jy
! Component: 100  -  total flux cleaned = -0.000517257 Jy
! Component: 150  -  total flux cleaned = -0.00055984 Jy
! Component: 200  -  total flux cleaned = -0.000559694 Jy
! Total flux subtracted in 200 components = -0.000559694 Jy
! Clean residual min=-0.002100 max=0.001611 Jy/beam
! Clean residual mean=-0.000001 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.421634 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.421634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091565Jy  sigma=1.215769
! Fit after  self-cal, rms=0.091567Jy  sigma=1.215685
wmodel J1653+3107_C_map.mod
! Writing 119 model components to file: J1653+3107_C_map.mod
wobs   J1653+3107_C_uvs.fits
! Writing UV FITS file: J1653+3107_C_uvs.fits
wwins  J1653+3107_C_map.win
! wwins: Wrote 7 windows to J1653+3107_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000780988 Jy
! Component: 100  -  total flux cleaned = -0.00102922 Jy
! Component: 150  -  total flux cleaned = -0.00129519 Jy
! Component: 200  -  total flux cleaned = -0.00138095 Jy
! Component: 250  -  total flux cleaned = -0.00151947 Jy
! Component: 300  -  total flux cleaned = -0.00157441 Jy
! Component: 350  -  total flux cleaned = -0.00168098 Jy
! Component: 400  -  total flux cleaned = -0.00178478 Jy
! Component: 450  -  total flux cleaned = -0.00178469 Jy
! Component: 500  -  total flux cleaned = -0.00185994 Jy
! Component: 550  -  total flux cleaned = -0.00193369 Jy
! Component: 600  -  total flux cleaned = -0.00200631 Jy
! Component: 650  -  total flux cleaned = -0.00207861 Jy
! Component: 700  -  total flux cleaned = -0.00212623 Jy
! Component: 750  -  total flux cleaned = -0.00224374 Jy
! Component: 800  -  total flux cleaned = -0.00229002 Jy
! Component: 850  -  total flux cleaned = -0.00231323 Jy
! Component: 900  -  total flux cleaned = -0.00240409 Jy
! Component: 950  -  total flux cleaned = -0.00247139 Jy
! Component: 1000  -  total flux cleaned = -0.00249411 Jy
! Component: 1050  -  total flux cleaned = -0.002648 Jy
! Component: 1100  -  total flux cleaned = -0.00264768 Jy
! Component: 1150  -  total flux cleaned = -0.00277755 Jy
! Component: 1200  -  total flux cleaned = -0.00277736 Jy
! Component: 1250  -  total flux cleaned = -0.00286193 Jy
! Component: 1300  -  total flux cleaned = -0.00294605 Jy
! Component: 1350  -  total flux cleaned = -0.00305051 Jy
! Component: 1400  -  total flux cleaned = -0.00309197 Jy
! Component: 1450  -  total flux cleaned = -0.00323549 Jy
! Component: 1500  -  total flux cleaned = -0.00337762 Jy
! Component: 1550  -  total flux cleaned = -0.0034175 Jy
! Component: 1600  -  total flux cleaned = -0.00351759 Jy
! Component: 1650  -  total flux cleaned = -0.00359721 Jy
! Component: 1700  -  total flux cleaned = -0.00363656 Jy
! Component: 1750  -  total flux cleaned = -0.00373409 Jy
! Component: 1800  -  total flux cleaned = -0.00379229 Jy
! Component: 1850  -  total flux cleaned = -0.00390788 Jy
! Component: 1900  -  total flux cleaned = -0.00390793 Jy
! Component: 1950  -  total flux cleaned = -0.00398379 Jy
! Component: 2000  -  total flux cleaned = -0.00411584 Jy
! Component: 2050  -  total flux cleaned = -0.00413456 Jy
! Component: 2100  -  total flux cleaned = -0.00420886 Jy
! Component: 2150  -  total flux cleaned = -0.00424598 Jy
! Component: 2200  -  total flux cleaned = -0.00422769 Jy
! Component: 2250  -  total flux cleaned = -0.0043737 Jy
! Component: 2300  -  total flux cleaned = -0.00444615 Jy
! Component: 2350  -  total flux cleaned = -0.0044282 Jy
! Component: 2400  -  total flux cleaned = -0.0044998 Jy
! Component: 2450  -  total flux cleaned = -0.00453517 Jy
! Component: 2500  -  total flux cleaned = -0.00455268 Jy
! Component: 2550  -  total flux cleaned = -0.00458784 Jy
! Component: 2600  -  total flux cleaned = -0.00458798 Jy
! Component: 2650  -  total flux cleaned = -0.00462263 Jy
! Component: 2700  -  total flux cleaned = -0.00465713 Jy
! Component: 2750  -  total flux cleaned = -0.00469125 Jy
! Component: 2800  -  total flux cleaned = -0.00484453 Jy
! Component: 2850  -  total flux cleaned = -0.00481058 Jy
! Component: 2900  -  total flux cleaned = -0.00489479 Jy
! Component: 2950  -  total flux cleaned = -0.0049785 Jy
! Component: 3000  -  total flux cleaned = -0.00497838 Jy
! Component: 3050  -  total flux cleaned = -0.00501147 Jy
! Component: 3100  -  total flux cleaned = -0.00511039 Jy
! Component: 3150  -  total flux cleaned = -0.00512681 Jy
! Component: 3200  -  total flux cleaned = -0.00512691 Jy
! Component: 3250  -  total flux cleaned = -0.00527298 Jy
! Component: 3300  -  total flux cleaned = -0.00536979 Jy
! Component: 3350  -  total flux cleaned = -0.00535356 Jy
! Component: 3400  -  total flux cleaned = -0.00540149 Jy
! Component: 3450  -  total flux cleaned = -0.00541732 Jy
! Component: 3500  -  total flux cleaned = -0.0054174 Jy
! Component: 3550  -  total flux cleaned = -0.00543317 Jy
! Component: 3600  -  total flux cleaned = -0.00549573 Jy
! Component: 3650  -  total flux cleaned = -0.00551128 Jy
! Component: 3700  -  total flux cleaned = -0.00554231 Jy
! Component: 3750  -  total flux cleaned = -0.005604 Jy
! Component: 3800  -  total flux cleaned = -0.00565005 Jy
! Component: 3850  -  total flux cleaned = -0.00566539 Jy
! Component: 3900  -  total flux cleaned = -0.00565018 Jy
! Component: 3950  -  total flux cleaned = -0.00571073 Jy
! Component: 4000  -  total flux cleaned = -0.00568043 Jy
! Component: 4050  -  total flux cleaned = -0.00569528 Jy
! Total flux subtracted in 4096 components = -0.00572512 Jy
! Clean residual min=-0.000928 max=0.000962 Jy/beam
! Clean residual mean=-0.000001 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.415909 Jy
keep
! Adding 344 model components to the UV plane model.
! The established model now contains 463 components and 0.41591 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1653+3107_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.329 x 3.652 at 1.286 degrees (North through East)
! Clean map  min=-0.0016781  max=0.35345 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1653+3107_C_map.fits
wmodel /scr/pima/bu007_uvs/J1653+3107_C_map.mod
! Writing 463 model components to file: /scr/pima/bu007_uvs/J1653+3107_C_map.mod
wobs   /scr/pima/bu007_uvs/J1653+3107_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1653+3107_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1653+3107_C_map.win
! wwins: Wrote 8 windows to /scr/pima/bu007_uvs/J1653+3107_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.353453 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270271 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.229397 0.229397 0.458794 0.917588 1.83518 3.67035 7.3407 14.6814 29.3628 58.7256
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.353 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1307.78 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1653+3107_C_dfm.log closed on Sun Jun 24 02:29:10 2018