! Started logfile: /scr/pima/bu007_uvs/J1605+3038_C_dfm.log on Sun Jun 24 02:28:23 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1605+3038_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1605+3038_C_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.973778 visibilities/baseline/integration-bin.
! Found source: J1605+3038
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 17528 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1605+3038_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009213Jy  sigma=16.576006
! Fit after  self-cal, rms=0.923442Jy  sigma=15.145066
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=3.515 mas, bpa=-5.132 degrees
! Estimated noise=0.693013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0630682 Jy
! Component: 100  -  total flux cleaned = 0.0768582 Jy
! Total flux subtracted in 100 components = 0.0768582 Jy
! Clean residual min=-0.005051 max=0.004897 Jy/beam
! Clean residual mean=-0.000001 rms=0.001141 Jy/beam
! Combined flux in latest and established models = 0.0768582 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0768582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086887Jy  sigma=1.360771
! Fit after  self-cal, rms=0.085998Jy  sigma=1.346726
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=3.712 mas, bpa=-5.038 degrees
! Estimated noise=0.338817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418811 Jy
! Component: 100  -  total flux cleaned = 0.00610055 Jy
! Component: 150  -  total flux cleaned = 0.007259 Jy
! Component: 200  -  total flux cleaned = 0.0080087 Jy
! Total flux subtracted in 200 components = 0.0080087 Jy
! Clean residual min=-0.002071 max=0.001700 Jy/beam
! Clean residual mean=0.000001 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0848669 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 25 components and 0.0848669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085812Jy  sigma=1.343257
! Fit after  self-cal, rms=0.085805Jy  sigma=1.343193
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.31 x 3.712 at -5.038 degrees (North through East)
! Clean map  min=-0.0019428  max=0.081791 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        1.01     
!   LA        1.00     MK        1.04     NL        1.01     OV        0.96     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.02     NL        0.97     OV        0.98     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.03     KP        0.99     
!   LA        1.00     MK        0.97     NL        0.97     OV        0.98     
!   PT        1.06     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.04     KP        1.01     
!   LA        1.01     MK        0.94     NL        1.01     OV        0.98     
!   PT        1.03     SC        1.04     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.92     KP        1.01     
!   LA        0.99     MK        1.00     NL        0.93     OV        0.99     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.97     KP        1.03     
!   LA        1.02     MK        1.04     NL        0.96     OV        0.97     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.02     KP        0.95     
!   LA        1.01     MK        1.05     NL        1.02     OV        0.96     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.03     KP        0.98     
!   LA        1.01     MK        1.03     NL        1.03     OV        0.98     
!   PT        1.05     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.085805Jy  sigma=1.343193
! Fit after  self-cal, rms=0.085526Jy  sigma=1.341254
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=3.719 mas, bpa=-5.011 degrees
! Estimated noise=0.337984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.84644e-05 Jy
! Component: 100  -  total flux cleaned = 2.97702e-05 Jy
! Component: 150  -  total flux cleaned = 5.33608e-05 Jy
! Component: 200  -  total flux cleaned = 6.4094e-05 Jy
! Total flux subtracted in 200 components = 6.4094e-05 Jy
! Clean residual min=-0.002085 max=0.001671 Jy/beam
! Clean residual mean=0.000000 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.084931 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.084931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085521Jy  sigma=1.341149
! Fit after  self-cal, rms=0.085539Jy  sigma=1.341040
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085539Jy  sigma=1.341040
! Fit after  self-cal, rms=0.085437Jy  sigma=1.341019
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.318 mas, bmaj=3.721 mas, bpa=-5.078 degrees
! Estimated noise=0.337687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132514 Jy
! Component: 100  -  total flux cleaned = -0.000118552 Jy
! Component: 150  -  total flux cleaned = -0.000109142 Jy
! Component: 200  -  total flux cleaned = -0.000100373 Jy
! Total flux subtracted in 200 components = -0.000100373 Jy
! Clean residual min=-0.002072 max=0.001679 Jy/beam
! Clean residual mean=0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0848306 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 33 components and 0.0848306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085434Jy  sigma=1.340955
! Fit after  self-cal, rms=0.085436Jy  sigma=1.340949
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.43489e-05 Jy
! Component: 100  -  total flux cleaned = 3.67159e-05 Jy
! Component: 150  -  total flux cleaned = 2.83401e-05 Jy
! Component: 200  -  total flux cleaned = 2.02303e-05 Jy
! Total flux subtracted in 200 components = 2.02303e-05 Jy
! Clean residual min=-0.002073 max=0.001680 Jy/beam
! Clean residual mean=0.000000 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.0848508 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 36 components and 0.0848508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085434Jy  sigma=1.340917
! Fit after  self-cal, rms=0.085435Jy  sigma=1.340913
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085435Jy  sigma=1.340913
! Fit after  self-cal, rms=0.085285Jy  sigma=1.340904
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.319 mas, bmaj=3.722 mas, bpa=-5.137 degrees
! Estimated noise=0.33727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019776 Jy
! Component: 100  -  total flux cleaned = -0.000215347 Jy
! Component: 150  -  total flux cleaned = -0.000223259 Jy
! Component: 200  -  total flux cleaned = -0.00022319 Jy
! Total flux subtracted in 200 components = -0.00022319 Jy
! Clean residual min=-0.002061 max=0.001681 Jy/beam
! Clean residual mean=0.000000 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0846277 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.0846277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085283Jy  sigma=1.340867
! Fit after  self-cal, rms=0.085283Jy  sigma=1.340864
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.75163e-05 Jy
! Component: 100  -  total flux cleaned = 1.27033e-05 Jy
! Component: 150  -  total flux cleaned = 5.49713e-06 Jy
! Component: 200  -  total flux cleaned = -1.4788e-06 Jy
! Total flux subtracted in 200 components = -1.4788e-06 Jy
! Clean residual min=-0.002061 max=0.001682 Jy/beam
! Clean residual mean=0.000000 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0846262 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 37 components and 0.0846262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085281Jy  sigma=1.340844
! Fit after  self-cal, rms=0.085282Jy  sigma=1.340841
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085282Jy  sigma=1.340841
! Fit after  self-cal, rms=0.085155Jy  sigma=1.340837
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.571 mas, bmaj=4.819 mas, bpa=-4.721 degrees
! Estimated noise=0.468909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000466276 Jy
! Component: 100  -  total flux cleaned = -0.000452501 Jy
! Component: 150  -  total flux cleaned = -0.000440722 Jy
! Component: 200  -  total flux cleaned = -0.000430843 Jy
! Total flux subtracted in 200 components = -0.000430843 Jy
! Clean residual min=-0.001789 max=0.002001 Jy/beam
! Clean residual mean=0.000001 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0841953 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 39 components and 0.0841953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085156Jy  sigma=1.340833
! Fit after  self-cal, rms=0.085159Jy  sigma=1.340828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.68143e-07 Jy
! Component: 100  -  total flux cleaned = 7.57645e-06 Jy
! Component: 150  -  total flux cleaned = 1.4815e-05 Jy
! Component: 200  -  total flux cleaned = 2.06579e-05 Jy
! Total flux subtracted in 200 components = 2.06579e-05 Jy
! Clean residual min=-0.001776 max=0.001996 Jy/beam
! Clean residual mean=0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.084216 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 39 components and 0.084216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085161Jy  sigma=1.340866
! Fit after  self-cal, rms=0.085163Jy  sigma=1.340864
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.32 mas, bmaj=3.724 mas, bpa=-5.18 degrees
! Estimated noise=0.336877 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.32 x 3.724 at -5.18 degrees (North through East)
! Clean map  min=-0.0019023  max=0.081423 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.047 mas, bmaj=3.525 mas, bpa=-5.35 degrees
! Estimated noise=0.695578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0633344 Jy
! Component: 100  -  total flux cleaned = 0.0772306 Jy
! Component: 150  -  total flux cleaned = 0.0808597 Jy
! Component: 200  -  total flux cleaned = 0.0829317 Jy
! Total flux subtracted in 200 components = 0.0829317 Jy
! Clean residual min=-0.004445 max=0.004128 Jy/beam
! Clean residual mean=-0.000001 rms=0.001062 Jy/beam
! Combined flux in latest and established models = 0.0829317 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0829317 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.32 mas, bmaj=3.724 mas, bpa=-5.18 degrees
! Estimated noise=0.336877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000935339 Jy
! Component: 100  -  total flux cleaned = 0.00117895 Jy
! Component: 150  -  total flux cleaned = 0.00120152 Jy
! Component: 200  -  total flux cleaned = 0.00123457 Jy
! Total flux subtracted in 200 components = 0.00123457 Jy
! Clean residual min=-0.002076 max=0.001652 Jy/beam
! Clean residual mean=0.000000 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0841663 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.0841663 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.571 mas, bmaj=4.819 mas, bpa=-4.721 degrees
! Estimated noise=0.468909 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.42049e-05 Jy
! Component: 100  -  total flux cleaned = -4.63726e-05 Jy
! Component: 150  -  total flux cleaned = -4.61074e-05 Jy
! Component: 200  -  total flux cleaned = -3.21155e-05 Jy
! Total flux subtracted in 200 components = -3.21155e-05 Jy
! Clean residual min=-0.001799 max=0.002012 Jy/beam
! Clean residual mean=0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.0841341 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.18372e-05 Jy
! Component: 100  -  total flux cleaned = 2.18231e-05 Jy
! Component: 150  -  total flux cleaned = 2.19139e-05 Jy
! Component: 200  -  total flux cleaned = 2.92055e-05 Jy
! Total flux subtracted in 200 components = 2.92055e-05 Jy
! Clean residual min=-0.001788 max=0.002007 Jy/beam
! Clean residual mean=0.000001 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.0841633 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 33 components and 0.0841633 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.32 mas, bmaj=3.724 mas, bpa=-5.18 degrees
! Estimated noise=0.336877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336492 Jy
! Component: 100  -  total flux cleaned = 0.000341109 Jy
! Component: 150  -  total flux cleaned = 0.000339538 Jy
! Component: 200  -  total flux cleaned = 0.000326851 Jy
! Total flux subtracted in 200 components = 0.000326851 Jy
! Clean residual min=-0.002055 max=0.001694 Jy/beam
! Clean residual mean=0.000000 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.0844902 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.0844902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085159Jy  sigma=1.340825
! Fit after  self-cal, rms=0.085153Jy  sigma=1.340814
wmodel J1605+3038_C_map.mod
! Writing 45 model components to file: J1605+3038_C_map.mod
wobs   J1605+3038_C_uvs.fits
! Writing UV FITS file: J1605+3038_C_uvs.fits
wwins  J1605+3038_C_map.win
! wwins: Wrote 1 windows to J1605+3038_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000537811 Jy
! Component: 100  -  total flux cleaned = -0.000626689 Jy
! Component: 150  -  total flux cleaned = -0.000543754 Jy
! Component: 200  -  total flux cleaned = -0.000518143 Jy
! Component: 250  -  total flux cleaned = -0.000467049 Jy
! Component: 300  -  total flux cleaned = -0.000442625 Jy
! Component: 350  -  total flux cleaned = -0.000442542 Jy
! Component: 400  -  total flux cleaned = -0.000490018 Jy
! Component: 450  -  total flux cleaned = -0.00055962 Jy
! Component: 500  -  total flux cleaned = -0.00067257 Jy
! Component: 550  -  total flux cleaned = -0.000760585 Jy
! Component: 600  -  total flux cleaned = -0.000782557 Jy
! Component: 650  -  total flux cleaned = -0.00093068 Jy
! Component: 700  -  total flux cleaned = -0.000931024 Jy
! Component: 750  -  total flux cleaned = -0.000972732 Jy
! Component: 800  -  total flux cleaned = -0.00109327 Jy
! Component: 850  -  total flux cleaned = -0.00117209 Jy
! Component: 900  -  total flux cleaned = -0.00119146 Jy
! Component: 950  -  total flux cleaned = -0.00124914 Jy
! Component: 1000  -  total flux cleaned = -0.0013442 Jy
! Component: 1050  -  total flux cleaned = -0.0014377 Jy
! Component: 1100  -  total flux cleaned = -0.00149304 Jy
! Component: 1150  -  total flux cleaned = -0.00154793 Jy
! Component: 1200  -  total flux cleaned = -0.0016202 Jy
! Component: 1250  -  total flux cleaned = -0.00163779 Jy
! Component: 1300  -  total flux cleaned = -0.00163807 Jy
! Component: 1350  -  total flux cleaned = -0.00170813 Jy
! Component: 1400  -  total flux cleaned = -0.00170812 Jy
! Component: 1450  -  total flux cleaned = -0.00174254 Jy
! Component: 1500  -  total flux cleaned = -0.0017767 Jy
! Component: 1550  -  total flux cleaned = -0.00182741 Jy
! Component: 1600  -  total flux cleaned = -0.0018609 Jy
! Component: 1650  -  total flux cleaned = -0.00194362 Jy
! Component: 1700  -  total flux cleaned = -0.00196011 Jy
! Component: 1750  -  total flux cleaned = -0.00197644 Jy
! Component: 1800  -  total flux cleaned = -0.00200869 Jy
! Component: 1850  -  total flux cleaned = -0.0020244 Jy
! Component: 1900  -  total flux cleaned = -0.00199271 Jy
! Component: 1950  -  total flux cleaned = -0.00199276 Jy
! Component: 2000  -  total flux cleaned = -0.00202368 Jy
! Component: 2050  -  total flux cleaned = -0.00194617 Jy
! Component: 2100  -  total flux cleaned = -0.00197699 Jy
! Component: 2150  -  total flux cleaned = -0.00193148 Jy
! Component: 2200  -  total flux cleaned = -0.00196167 Jy
! Component: 2250  -  total flux cleaned = -0.00191695 Jy
! Component: 2300  -  total flux cleaned = -0.00194668 Jy
! Component: 2350  -  total flux cleaned = -0.00191719 Jy
! Component: 2400  -  total flux cleaned = -0.00200481 Jy
! Component: 2450  -  total flux cleaned = -0.00194665 Jy
! Component: 2500  -  total flux cleaned = -0.00196113 Jy
! Component: 2550  -  total flux cleaned = -0.00194694 Jy
! Component: 2600  -  total flux cleaned = -0.00197541 Jy
! Component: 2650  -  total flux cleaned = -0.00194709 Jy
! Component: 2700  -  total flux cleaned = -0.0019469 Jy
! Component: 2750  -  total flux cleaned = -0.00193297 Jy
! Component: 2800  -  total flux cleaned = -0.0018776 Jy
! Component: 2850  -  total flux cleaned = -0.00183643 Jy
! Component: 2900  -  total flux cleaned = -0.00186379 Jy
! Component: 2950  -  total flux cleaned = -0.00189089 Jy
! Component: 3000  -  total flux cleaned = -0.00186399 Jy
! Component: 3050  -  total flux cleaned = -0.00185056 Jy
! Component: 3100  -  total flux cleaned = -0.00182386 Jy
! Component: 3150  -  total flux cleaned = -0.00182378 Jy
! Component: 3200  -  total flux cleaned = -0.00179755 Jy
! Component: 3250  -  total flux cleaned = -0.00177167 Jy
! Component: 3300  -  total flux cleaned = -0.00179779 Jy
! Component: 3350  -  total flux cleaned = -0.00181081 Jy
! Component: 3400  -  total flux cleaned = -0.00178518 Jy
! Component: 3450  -  total flux cleaned = -0.00183614 Jy
! Component: 3500  -  total flux cleaned = -0.00179803 Jy
! Component: 3550  -  total flux cleaned = -0.0017981 Jy
! Component: 3600  -  total flux cleaned = -0.00182324 Jy
! Component: 3650  -  total flux cleaned = -0.00179827 Jy
! Component: 3700  -  total flux cleaned = -0.00178587 Jy
! Component: 3750  -  total flux cleaned = -0.00179819 Jy
! Component: 3800  -  total flux cleaned = -0.00176146 Jy
! Component: 3850  -  total flux cleaned = -0.00178578 Jy
! Component: 3900  -  total flux cleaned = -0.00177364 Jy
! Component: 3950  -  total flux cleaned = -0.00176166 Jy
! Component: 4000  -  total flux cleaned = -0.00179751 Jy
! Component: 4050  -  total flux cleaned = -0.0017737 Jy
! Total flux subtracted in 4096 components = -0.00175 Jy
! Clean residual min=-0.000710 max=0.000661 Jy/beam
! Clean residual mean=0.000000 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0827402 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 309 components and 0.0827402 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1605+3038_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.32 x 3.724 at -5.18 degrees (North through East)
! Clean map  min=-0.0013713  max=0.081314 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1605+3038_C_map.fits
wmodel /scr/pima/bu007_uvs/J1605+3038_C_map.mod
! Writing 309 model components to file: /scr/pima/bu007_uvs/J1605+3038_C_map.mod
wobs   /scr/pima/bu007_uvs/J1605+3038_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1605+3038_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1605+3038_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J1605+3038_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0813136 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000205317 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.757501 0.757501 1.515 3.03 6.06001 12.12 24.24 48.4801 96.9602
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.081 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  396.038 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1605+3038_C_dfm.log closed on Sun Jun 24 02:28:27 2018