! Started logfile: /scr/pima/bu007_uvs/J1544+3240_C_dfm.log on Sun Jun 24 02:27:53 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1544+3240_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1544+3240_C_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.948642 visibilities/baseline/integration-bin.
! Found source: J1544+3240
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15368 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1544+3240_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018262Jy  sigma=16.409424
! Fit after  self-cal, rms=0.845868Jy  sigma=13.627111
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.119 mas, bmaj=3.138 mas, bpa=-4.759 degrees
! Estimated noise=0.542479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121678 Jy
! Component: 100  -  total flux cleaned = 0.148637 Jy
! Total flux subtracted in 100 components = 0.148637 Jy
! Clean residual min=-0.004164 max=0.009000 Jy/beam
! Clean residual mean=0.000002 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.148636 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.148636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.093457Jy  sigma=1.345591
! Fit after  self-cal, rms=0.093444Jy  sigma=1.345473
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00909982 Jy
! Component: 100  -  total flux cleaned = 0.013519 Jy
! Total flux subtracted in 100 components = 0.013519 Jy
! Clean residual min=-0.002884 max=0.002963 Jy/beam
! Clean residual mean=0.000001 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.162156 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.162156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092478Jy  sigma=1.328692
! Fit after  self-cal, rms=0.092466Jy  sigma=1.328603
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.356 mas, bmaj=3.444 mas, bpa=-3.472 degrees
! Estimated noise=0.378346 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.3, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349939 Jy
! Component: 100  -  total flux cleaned = 0.00561592 Jy
! Component: 150  -  total flux cleaned = 0.0068532 Jy
! Component: 200  -  total flux cleaned = 0.00725076 Jy
! Total flux subtracted in 200 components = 0.00725076 Jy
! Clean residual min=-0.002040 max=0.002095 Jy/beam
! Clean residual mean=0.000001 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.169406 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 34 components and 0.169406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092313Jy  sigma=1.326071
! Fit after  self-cal, rms=0.092298Jy  sigma=1.325993
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.356 x 3.444 at -3.472 degrees (North through East)
! Clean map  min=-0.0018811  max=0.15816 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.97     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.99     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        0.98     
!   LA        0.99     MK        1.03     NL        0.99     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        1.03     
!   LA        0.99     MK        0.97     NL        1.00     OV        0.99     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     HN        0.96     KP        0.98     
!   LA        0.96     MK        1.01     NL        1.03     OV        0.97     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.95     KP        1.02     
!   LA        1.00     MK        1.05     NL        0.98     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.95     
!   LA        0.99     MK        0.99     NL        1.05     OV        1.04     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.03     NL        0.96     OV        1.04     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.02     KP        0.98     
!   LA        1.00     MK        1.01     NL        0.99     OV        1.00     
!   PT        1.04     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.092298Jy  sigma=1.325993
! Fit after  self-cal, rms=0.091294Jy  sigma=1.322745
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.36 mas, bmaj=3.446 mas, bpa=-3.54 degrees
! Estimated noise=0.377474 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.80797e-05 Jy
! Component: 100  -  total flux cleaned = -9.94946e-05 Jy
! Component: 150  -  total flux cleaned = -0.000141829 Jy
! Component: 200  -  total flux cleaned = -0.000180613 Jy
! Total flux subtracted in 200 components = -0.000180613 Jy
! Clean residual min=-0.001865 max=0.002212 Jy/beam
! Clean residual mean=0.000003 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.169226 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 57 components and 0.169226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091279Jy  sigma=1.322522
! Fit after  self-cal, rms=0.091273Jy  sigma=1.322464
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091273Jy  sigma=1.322464
! Fit after  self-cal, rms=0.091176Jy  sigma=1.320509
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=3.446 mas, bpa=-3.437 degrees
! Estimated noise=0.377644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156438 Jy
! Component: 100  -  total flux cleaned = -0.000137791 Jy
! Component: 150  -  total flux cleaned = -0.000122503 Jy
! Component: 200  -  total flux cleaned = -0.00010839 Jy
! Total flux subtracted in 200 components = -0.00010839 Jy
! Clean residual min=-0.001872 max=0.002154 Jy/beam
! Clean residual mean=0.000003 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.169117 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 0.169117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091167Jy  sigma=1.320419
! Fit after  self-cal, rms=0.091172Jy  sigma=1.320389
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.2, 33.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150448 Jy
! Component: 100  -  total flux cleaned = 0.0017991 Jy
! Component: 150  -  total flux cleaned = 0.00209469 Jy
! Component: 200  -  total flux cleaned = 0.00237769 Jy
! Total flux subtracted in 200 components = 0.00237769 Jy
! Clean residual min=-0.001817 max=0.001874 Jy/beam
! Clean residual mean=0.000002 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.171495 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 85 components and 0.171495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091125Jy  sigma=1.319768
! Fit after  self-cal, rms=0.091124Jy  sigma=1.319745
! Inverting map 
! Added new window around map position (39.6, -19.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122717 Jy
! Component: 100  -  total flux cleaned = 0.0013834 Jy
! Component: 150  -  total flux cleaned = 0.00148837 Jy
! Component: 200  -  total flux cleaned = 0.00165341 Jy
! Total flux subtracted in 200 components = 0.00165341 Jy
! Clean residual min=-0.001743 max=0.001710 Jy/beam
! Clean residual mean=0.000002 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.173148 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 97 components and 0.173148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091095Jy  sigma=1.319250
! Fit after  self-cal, rms=0.091094Jy  sigma=1.319219
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091094Jy  sigma=1.319219
! Fit after  self-cal, rms=0.090883Jy  sigma=1.319116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.362 mas, bmaj=3.447 mas, bpa=-3.422 degrees
! Estimated noise=0.377065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000279719 Jy
! Component: 100  -  total flux cleaned = 0.000303158 Jy
! Component: 150  -  total flux cleaned = 0.000386843 Jy
! Component: 200  -  total flux cleaned = 0.000445713 Jy
! Total flux subtracted in 200 components = 0.000445713 Jy
! Clean residual min=-0.001681 max=0.001727 Jy/beam
! Clean residual mean=0.000002 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.173594 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 109 components and 0.173594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090872Jy  sigma=1.318939
! Fit after  self-cal, rms=0.090874Jy  sigma=1.318932
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.74163e-05 Jy
! Component: 100  -  total flux cleaned = 9.02419e-05 Jy
! Component: 150  -  total flux cleaned = 0.000124728 Jy
! Component: 200  -  total flux cleaned = 0.0001746 Jy
! Total flux subtracted in 200 components = 0.0001746 Jy
! Clean residual min=-0.001666 max=0.001721 Jy/beam
! Clean residual mean=0.000002 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.173769 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 119 components and 0.173769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090867Jy  sigma=1.318833
! Fit after  self-cal, rms=0.090868Jy  sigma=1.318830
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090868Jy  sigma=1.318830
! Fit after  self-cal, rms=0.090798Jy  sigma=1.318818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=4.742 mas, bpa=-2.485 degrees
! Estimated noise=0.525308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.19751e-06 Jy
! Component: 100  -  total flux cleaned = 0.000154967 Jy
! Component: 150  -  total flux cleaned = 0.000243705 Jy
! Component: 200  -  total flux cleaned = 0.000322743 Jy
! Total flux subtracted in 200 components = 0.000322743 Jy
! Clean residual min=-0.001904 max=0.001711 Jy/beam
! Clean residual mean=0.000004 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.174091 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 129 components and 0.174091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090796Jy  sigma=1.318784
! Fit after  self-cal, rms=0.090794Jy  sigma=1.318777
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.67607e-05 Jy
! Component: 100  -  total flux cleaned = 4.45668e-05 Jy
! Component: 150  -  total flux cleaned = 8.34009e-05 Jy
! Component: 200  -  total flux cleaned = 9.61292e-05 Jy
! Total flux subtracted in 200 components = 9.61292e-05 Jy
! Clean residual min=-0.001902 max=0.001714 Jy/beam
! Clean residual mean=0.000004 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.174188 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 138 components and 0.174188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090794Jy  sigma=1.318774
! Fit after  self-cal, rms=0.090794Jy  sigma=1.318772
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.362 mas, bmaj=3.448 mas, bpa=-3.409 degrees
! Estimated noise=0.376933 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.362 x 3.448 at -3.409 degrees (North through East)
! Clean map  min=-0.0015357  max=0.15769 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.123 mas, bmaj=3.142 mas, bpa=-4.668 degrees
! Estimated noise=0.541901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121237 Jy
! Component: 100  -  total flux cleaned = 0.148019 Jy
! Component: 150  -  total flux cleaned = 0.156805 Jy
! Component: 200  -  total flux cleaned = 0.161176 Jy
! Total flux subtracted in 200 components = 0.161176 Jy
! Clean residual min=-0.003003 max=0.002862 Jy/beam
! Clean residual mean=0.000002 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.161176 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.161176 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.362 mas, bmaj=3.448 mas, bpa=-3.409 degrees
! Estimated noise=0.376933 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00363392 Jy
! Component: 100  -  total flux cleaned = 0.00600641 Jy
! Component: 150  -  total flux cleaned = 0.00750709 Jy
! Component: 200  -  total flux cleaned = 0.00836049 Jy
! Total flux subtracted in 200 components = 0.00836049 Jy
! Clean residual min=-0.001856 max=0.001711 Jy/beam
! Clean residual mean=0.000003 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.169537 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.169537 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=4.742 mas, bpa=-2.485 degrees
! Estimated noise=0.525308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126345 Jy
! Component: 100  -  total flux cleaned = 0.00224886 Jy
! Component: 150  -  total flux cleaned = 0.002785 Jy
! Component: 200  -  total flux cleaned = 0.00305256 Jy
! Total flux subtracted in 200 components = 0.00305256 Jy
! Clean residual min=-0.001884 max=0.001781 Jy/beam
! Clean residual mean=0.000005 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.172589 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299519 Jy
! Component: 100  -  total flux cleaned = 0.000532653 Jy
! Component: 150  -  total flux cleaned = 0.000737753 Jy
! Component: 200  -  total flux cleaned = 0.000917443 Jy
! Total flux subtracted in 200 components = 0.000917443 Jy
! Clean residual min=-0.001857 max=0.001737 Jy/beam
! Clean residual mean=0.000005 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.173507 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 77 components and 0.173507 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.362 mas, bmaj=3.448 mas, bpa=-3.409 degrees
! Estimated noise=0.376933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.91006e-05 Jy
! Component: 100  -  total flux cleaned = 0.000186917 Jy
! Component: 150  -  total flux cleaned = 0.000391565 Jy
! Component: 200  -  total flux cleaned = 0.000606466 Jy
! Total flux subtracted in 200 components = 0.000606466 Jy
! Clean residual min=-0.001667 max=0.001781 Jy/beam
! Clean residual mean=0.000002 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.174113 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.174113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090822Jy  sigma=1.319229
! Fit after  self-cal, rms=0.090818Jy  sigma=1.319189
wmodel J1544+3240_C_map.mod
! Writing 98 model components to file: J1544+3240_C_map.mod
wobs   J1544+3240_C_uvs.fits
! Writing UV FITS file: J1544+3240_C_uvs.fits
wwins  J1544+3240_C_map.win
! wwins: Wrote 4 windows to J1544+3240_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265886 Jy
! Component: 100  -  total flux cleaned = 0.000384911 Jy
! Component: 150  -  total flux cleaned = 0.000498579 Jy
! Component: 200  -  total flux cleaned = 0.000609154 Jy
! Component: 250  -  total flux cleaned = 0.000690322 Jy
! Component: 300  -  total flux cleaned = 0.000743142 Jy
! Component: 350  -  total flux cleaned = 0.000795015 Jy
! Component: 400  -  total flux cleaned = 0.000922669 Jy
! Component: 450  -  total flux cleaned = 0.00092213 Jy
! Component: 500  -  total flux cleaned = 0.00104652 Jy
! Component: 550  -  total flux cleaned = 0.00107128 Jy
! Component: 600  -  total flux cleaned = 0.00114429 Jy
! Component: 650  -  total flux cleaned = 0.00126327 Jy
! Component: 700  -  total flux cleaned = 0.00128694 Jy
! Component: 750  -  total flux cleaned = 0.00128691 Jy
! Component: 800  -  total flux cleaned = 0.0013334 Jy
! Component: 850  -  total flux cleaned = 0.00144721 Jy
! Component: 900  -  total flux cleaned = 0.00142454 Jy
! Component: 950  -  total flux cleaned = 0.00140266 Jy
! Component: 1000  -  total flux cleaned = 0.00151305 Jy
! Component: 1050  -  total flux cleaned = 0.00151299 Jy
! Component: 1100  -  total flux cleaned = 0.00157817 Jy
! Component: 1150  -  total flux cleaned = 0.001621 Jy
! Component: 1200  -  total flux cleaned = 0.00164237 Jy
! Component: 1250  -  total flux cleaned = 0.00162173 Jy
! Component: 1300  -  total flux cleaned = 0.0016638 Jy
! Component: 1350  -  total flux cleaned = 0.00170534 Jy
! Component: 1400  -  total flux cleaned = 0.00172571 Jy
! Component: 1450  -  total flux cleaned = 0.00178675 Jy
! Component: 1500  -  total flux cleaned = 0.00184711 Jy
! Component: 1550  -  total flux cleaned = 0.00188703 Jy
! Component: 1600  -  total flux cleaned = 0.00184718 Jy
! Component: 1650  -  total flux cleaned = 0.0019456 Jy
! Component: 1700  -  total flux cleaned = 0.00186736 Jy
! Component: 1750  -  total flux cleaned = 0.00186732 Jy
! Component: 1800  -  total flux cleaned = 0.00192466 Jy
! Component: 1850  -  total flux cleaned = 0.00188639 Jy
! Component: 1900  -  total flux cleaned = 0.00188682 Jy
! Component: 1950  -  total flux cleaned = 0.00192424 Jy
! Component: 2000  -  total flux cleaned = 0.00203632 Jy
! Component: 2050  -  total flux cleaned = 0.00194338 Jy
! Component: 2100  -  total flux cleaned = 0.0019616 Jy
! Component: 2150  -  total flux cleaned = 0.00194341 Jy
! Component: 2200  -  total flux cleaned = 0.00201614 Jy
! Component: 2250  -  total flux cleaned = 0.00196186 Jy
! Component: 2300  -  total flux cleaned = 0.00201544 Jy
! Component: 2350  -  total flux cleaned = 0.00197993 Jy
! Component: 2400  -  total flux cleaned = 0.00201525 Jy
! Component: 2450  -  total flux cleaned = 0.00192737 Jy
! Component: 2500  -  total flux cleaned = 0.00203241 Jy
! Component: 2550  -  total flux cleaned = 0.00199766 Jy
! Component: 2600  -  total flux cleaned = 0.00199769 Jy
! Component: 2650  -  total flux cleaned = 0.00206624 Jy
! Component: 2700  -  total flux cleaned = 0.00204936 Jy
! Component: 2750  -  total flux cleaned = 0.00206623 Jy
! Component: 2800  -  total flux cleaned = 0.00213376 Jy
! Component: 2850  -  total flux cleaned = 0.00218433 Jy
! Component: 2900  -  total flux cleaned = 0.00213443 Jy
! Component: 2950  -  total flux cleaned = 0.00223391 Jy
! Component: 3000  -  total flux cleaned = 0.00216795 Jy
! Component: 3050  -  total flux cleaned = 0.00224976 Jy
! Component: 3100  -  total flux cleaned = 0.00215201 Jy
! Component: 3150  -  total flux cleaned = 0.00220063 Jy
! Component: 3200  -  total flux cleaned = 0.00216836 Jy
! Component: 3250  -  total flux cleaned = 0.00208815 Jy
! Component: 3300  -  total flux cleaned = 0.00212002 Jy
! Component: 3350  -  total flux cleaned = 0.00212011 Jy
! Component: 3400  -  total flux cleaned = 0.00212027 Jy
! Component: 3450  -  total flux cleaned = 0.00207304 Jy
! Component: 3500  -  total flux cleaned = 0.00207311 Jy
! Component: 3550  -  total flux cleaned = 0.00210418 Jy
! Component: 3600  -  total flux cleaned = 0.00201116 Jy
! Component: 3650  -  total flux cleaned = 0.00199567 Jy
! Component: 3700  -  total flux cleaned = 0.00199563 Jy
! Component: 3750  -  total flux cleaned = 0.00198031 Jy
! Component: 3800  -  total flux cleaned = 0.00199557 Jy
! Component: 3850  -  total flux cleaned = 0.00196532 Jy
! Component: 3900  -  total flux cleaned = 0.00198024 Jy
! Component: 3950  -  total flux cleaned = 0.00198033 Jy
! Component: 4000  -  total flux cleaned = 0.00196535 Jy
! Component: 4050  -  total flux cleaned = 0.00187636 Jy
! Total flux subtracted in 4096 components = 0.00192071 Jy
! Clean residual min=-0.000799 max=0.001009 Jy/beam
! Clean residual mean=0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.176034 Jy
keep
! Adding 315 model components to the UV plane model.
! The established model now contains 413 components and 0.176034 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1544+3240_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.362 x 3.448 at -3.409 degrees (North through East)
! Clean map  min=-0.0012922  max=0.15749 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1544+3240_C_map.fits
wmodel /scr/pima/bu007_uvs/J1544+3240_C_map.mod
! Writing 413 model components to file: /scr/pima/bu007_uvs/J1544+3240_C_map.mod
wobs   /scr/pima/bu007_uvs/J1544+3240_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1544+3240_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1544+3240_C_map.win
! wwins: Wrote 5 windows to /scr/pima/bu007_uvs/J1544+3240_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.157487 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000259697 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.494704 0.494704 0.989407 1.97881 3.95763 7.91526 15.8305 31.661 63.3221
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.157 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  606.423 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1544+3240_C_dfm.log closed on Sun Jun 24 02:27:58 2018