! Started logfile: /scr/pima/bu007_uvs/J1514+3046_C_dfm.log on Sun Jun 24 02:26:53 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1514+3046_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1514+3046_C_uva.fits
! AN table 1: 50 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.984444 visibilities/baseline/integration-bin.
! Found source: J1514+3046
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 17720 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1514+3046_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005526Jy  sigma=17.460300
! Fit after  self-cal, rms=0.962344Jy  sigma=16.707112
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.037 mas, bmaj=3.568 mas, bpa=-8.076 degrees
! Estimated noise=0.616348 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.031614 Jy
! Component: 100  -  total flux cleaned = 0.0387137 Jy
! Total flux subtracted in 100 components = 0.0387137 Jy
! Clean residual min=-0.004213 max=0.003553 Jy/beam
! Clean residual mean=0.000002 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.0387137 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0387137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084135Jy  sigma=1.388205
! Fit after  self-cal, rms=0.082050Jy  sigma=1.353384
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572388 Jy
! Component: 100  -  total flux cleaned = 0.00806173 Jy
! Total flux subtracted in 100 components = 0.00806173 Jy
! Clean residual min=-0.003717 max=0.003134 Jy/beam
! Clean residual mean=0.000002 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.0467755 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.0467755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081681Jy  sigma=1.346173
! Fit after  self-cal, rms=0.081654Jy  sigma=1.345880
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=3.721 mas, bpa=-7.361 degrees
! Estimated noise=0.313185 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013001 Jy
! Component: 100  -  total flux cleaned = 0.00147383 Jy
! Component: 150  -  total flux cleaned = 0.00139163 Jy
! Component: 200  -  total flux cleaned = 0.00132524 Jy
! Total flux subtracted in 200 components = 0.00132524 Jy
! Clean residual min=-0.002142 max=0.001917 Jy/beam
! Clean residual mean=0.000002 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.0481007 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.0481007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081631Jy  sigma=1.345429
! Fit after  self-cal, rms=0.081597Jy  sigma=1.345269
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.31 x 3.721 at -7.361 degrees (North through East)
! Clean map  min=-0.001991  max=0.04578 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.86     HN        0.93     KP        0.82     
!   LA        1.15     MK        1.07     NL        1.03     OV        0.95     
!   PT        0.97     SC        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.07     HN        1.13     KP        0.92     
!   LA        0.87     MK        1.02     NL        0.96     OV        1.04     
!   PT        0.94     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.93     KP        0.99     
!   LA        0.96     MK        0.99     NL        1.12     OV        0.98     
!   PT        0.99     SC        1.18     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.08     HN        0.92     KP        0.91     
!   LA        1.08     MK        1.10     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        0.92     KP        1.06     
!   LA        1.19     MK        1.04     NL        0.89     OV        1.03     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.97     HN        0.90     KP        1.01     
!   LA        1.08     MK        1.09     NL        1.00     OV        1.00     
!   PT        0.94     SC        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.01     HN        0.94     KP        0.97     
!   LA        1.06     MK        0.95     NL        1.01     OV        0.95     
!   PT        1.00     SC        0.91     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        0.88     KP        0.97     
!   LA        1.17     MK        0.98     NL        0.92     OV        1.00     
!   PT        0.94     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.081597Jy  sigma=1.345269
! Fit after  self-cal, rms=0.080987Jy  sigma=1.342752
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.311 mas, bmaj=3.725 mas, bpa=-7.393 degrees
! Estimated noise=0.309704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000420844 Jy
! Component: 100  -  total flux cleaned = -0.000511399 Jy
! Component: 150  -  total flux cleaned = -0.000569761 Jy
! Component: 200  -  total flux cleaned = -0.000618297 Jy
! Total flux subtracted in 200 components = -0.000618297 Jy
! Clean residual min=-0.001822 max=0.001506 Jy/beam
! Clean residual mean=0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.0474824 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 27 components and 0.0474824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080979Jy  sigma=1.342643
! Fit after  self-cal, rms=0.081086Jy  sigma=1.341609
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081086Jy  sigma=1.341609
! Fit after  self-cal, rms=0.081694Jy  sigma=1.341385
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.312 mas, bmaj=3.729 mas, bpa=-7.359 degrees
! Estimated noise=0.309277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271254 Jy
! Component: 100  -  total flux cleaned = -0.000382086 Jy
! Component: 150  -  total flux cleaned = -0.000455683 Jy
! Component: 200  -  total flux cleaned = -0.000517201 Jy
! Total flux subtracted in 200 components = -0.000517201 Jy
! Clean residual min=-0.001685 max=0.001536 Jy/beam
! Clean residual mean=0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.0469652 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.0469652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081687Jy  sigma=1.341276
! Fit after  self-cal, rms=0.081718Jy  sigma=1.340676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.55216e-05 Jy
! Component: 100  -  total flux cleaned = -0.000114307 Jy
! Component: 150  -  total flux cleaned = -0.000173606 Jy
! Component: 200  -  total flux cleaned = -0.0001942 Jy
! Total flux subtracted in 200 components = -0.0001942 Jy
! Clean residual min=-0.001709 max=0.001569 Jy/beam
! Clean residual mean=0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.046771 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.046771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081713Jy  sigma=1.340604
! Fit after  self-cal, rms=0.081708Jy  sigma=1.340515
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081708Jy  sigma=1.340515
! Fit after  self-cal, rms=0.081807Jy  sigma=1.340460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.312 mas, bmaj=3.736 mas, bpa=-7.356 degrees
! Estimated noise=0.308316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000259868 Jy
! Component: 100  -  total flux cleaned = -0.000347011 Jy
! Component: 150  -  total flux cleaned = -0.000418655 Jy
! Component: 200  -  total flux cleaned = -0.000439636 Jy
! Total flux subtracted in 200 components = -0.000439636 Jy
! Clean residual min=-0.001704 max=0.001579 Jy/beam
! Clean residual mean=0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.0463314 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.0463314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081802Jy  sigma=1.340396
! Fit after  self-cal, rms=0.081826Jy  sigma=1.340355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.18368e-05 Jy
! Component: 100  -  total flux cleaned = -9.80582e-05 Jy
! Component: 150  -  total flux cleaned = -0.000135395 Jy
! Component: 200  -  total flux cleaned = -0.000143564 Jy
! Total flux subtracted in 200 components = -0.000143564 Jy
! Clean residual min=-0.001702 max=0.001596 Jy/beam
! Clean residual mean=0.000001 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0461878 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 0.0461878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081823Jy  sigma=1.340317
! Fit after  self-cal, rms=0.081824Jy  sigma=1.340292
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081824Jy  sigma=1.340292
! Fit after  self-cal, rms=0.081726Jy  sigma=1.340266
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.55 mas, bmaj=4.829 mas, bpa=-7.5 degrees
! Estimated noise=0.431173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202342 Jy
! Component: 100  -  total flux cleaned = -0.000241959 Jy
! Component: 150  -  total flux cleaned = -0.000280897 Jy
! Component: 200  -  total flux cleaned = -0.000305578 Jy
! Total flux subtracted in 200 components = -0.000305578 Jy
! Clean residual min=-0.002013 max=0.001836 Jy/beam
! Clean residual mean=0.000002 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.0458822 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 43 components and 0.0458822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081724Jy  sigma=1.340244
! Fit after  self-cal, rms=0.081717Jy  sigma=1.339938
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.7273e-05 Jy
! Component: 100  -  total flux cleaned = -9.61683e-05 Jy
! Component: 150  -  total flux cleaned = -0.000124854 Jy
! Component: 200  -  total flux cleaned = -0.000134111 Jy
! Total flux subtracted in 200 components = -0.000134111 Jy
! Clean residual min=-0.002007 max=0.001823 Jy/beam
! Clean residual mean=0.000002 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.0457481 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 45 components and 0.0457481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081717Jy  sigma=1.339941
! Fit after  self-cal, rms=0.081711Jy  sigma=1.339870
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=3.743 mas, bpa=-7.379 degrees
! Estimated noise=0.307131 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.31 x 3.743 at -7.379 degrees (North through East)
! Clean map  min=-0.0014991  max=0.044665 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=3.607 mas, bpa=-7.985 degrees
! Estimated noise=0.604878 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0341721 Jy
! Component: 100  -  total flux cleaned = 0.0421621 Jy
! Component: 150  -  total flux cleaned = 0.0445777 Jy
! Component: 200  -  total flux cleaned = 0.0453677 Jy
! Total flux subtracted in 200 components = 0.0453677 Jy
! Clean residual min=-0.003370 max=0.002915 Jy/beam
! Clean residual mean=0.000001 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.0453678 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0453678 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=3.743 mas, bpa=-7.379 degrees
! Estimated noise=0.307131 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000200729 Jy
! Component: 100  -  total flux cleaned = 0.000206531 Jy
! Component: 150  -  total flux cleaned = 0.000121776 Jy
! Component: 200  -  total flux cleaned = 5.49399e-05 Jy
! Total flux subtracted in 200 components = 5.49399e-05 Jy
! Clean residual min=-0.001651 max=0.001678 Jy/beam
! Clean residual mean=0.000001 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.0454227 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.0454227 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.55 mas, bmaj=4.829 mas, bpa=-7.5 degrees
! Estimated noise=0.431173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288903 Jy
! Component: 100  -  total flux cleaned = 0.000330431 Jy
! Component: 150  -  total flux cleaned = 0.00035932 Jy
! Component: 200  -  total flux cleaned = 0.000326573 Jy
! Total flux subtracted in 200 components = 0.000326573 Jy
! Clean residual min=-0.002021 max=0.001870 Jy/beam
! Clean residual mean=0.000002 rms=0.000543 Jy/beam
! Combined flux in latest and established models = 0.0457493 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.83838e-05 Jy
! Component: 100  -  total flux cleaned = -4.16709e-05 Jy
! Component: 150  -  total flux cleaned = -6.13067e-05 Jy
! Component: 200  -  total flux cleaned = -7.26693e-05 Jy
! Total flux subtracted in 200 components = -7.26693e-05 Jy
! Clean residual min=-0.002026 max=0.001856 Jy/beam
! Clean residual mean=0.000002 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0456766 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.0456766 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=3.743 mas, bpa=-7.379 degrees
! Estimated noise=0.307131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027369 Jy
! Component: 100  -  total flux cleaned = -0.000270973 Jy
! Component: 150  -  total flux cleaned = -0.000249399 Jy
! Component: 200  -  total flux cleaned = -0.000231986 Jy
! Total flux subtracted in 200 components = -0.000231986 Jy
! Clean residual min=-0.001632 max=0.001612 Jy/beam
! Clean residual mean=0.000001 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.0454446 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 32 components and 0.0454446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081710Jy  sigma=1.339965
! Fit after  self-cal, rms=0.081709Jy  sigma=1.339928
wmodel J1514+3046_C_map.mod
! Writing 32 model components to file: J1514+3046_C_map.mod
wobs   J1514+3046_C_uvs.fits
! Writing UV FITS file: J1514+3046_C_uvs.fits
wwins  J1514+3046_C_map.win
! wwins: Wrote 1 windows to J1514+3046_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012493 Jy
! Component: 100  -  total flux cleaned = -0.000178366 Jy
! Component: 150  -  total flux cleaned = -0.0001796 Jy
! Component: 200  -  total flux cleaned = -0.000230248 Jy
! Component: 250  -  total flux cleaned = -0.000205639 Jy
! Component: 300  -  total flux cleaned = -0.00020594 Jy
! Component: 350  -  total flux cleaned = -0.000206028 Jy
! Component: 400  -  total flux cleaned = -0.00020583 Jy
! Component: 450  -  total flux cleaned = -0.000205985 Jy
! Component: 500  -  total flux cleaned = -0.000185058 Jy
! Component: 550  -  total flux cleaned = -0.000226687 Jy
! Component: 600  -  total flux cleaned = -0.000267408 Jy
! Component: 650  -  total flux cleaned = -0.000247119 Jy
! Component: 700  -  total flux cleaned = -0.000286695 Jy
! Component: 750  -  total flux cleaned = -0.00028663 Jy
! Component: 800  -  total flux cleaned = -0.000324681 Jy
! Component: 850  -  total flux cleaned = -0.000305553 Jy
! Component: 900  -  total flux cleaned = -0.000287829 Jy
! Component: 950  -  total flux cleaned = -0.000306537 Jy
! Component: 1000  -  total flux cleaned = -0.000270723 Jy
! Component: 1050  -  total flux cleaned = -0.000218091 Jy
! Component: 1100  -  total flux cleaned = -0.000200476 Jy
! Component: 1150  -  total flux cleaned = -0.000132406 Jy
! Component: 1200  -  total flux cleaned = -8.20748e-05 Jy
! Component: 1250  -  total flux cleaned = -6.55701e-05 Jy
! Component: 1300  -  total flux cleaned = 1.60644e-05 Jy
! Component: 1350  -  total flux cleaned = -5.18867e-09 Jy
! Component: 1400  -  total flux cleaned = 1.62619e-05 Jy
! Component: 1450  -  total flux cleaned = 4.783e-05 Jy
! Component: 1500  -  total flux cleaned = 6.33614e-05 Jy
! Component: 1550  -  total flux cleaned = 3.26171e-05 Jy
! Component: 1600  -  total flux cleaned = 2.21518e-06 Jy
! Component: 1650  -  total flux cleaned = 2.2724e-06 Jy
! Component: 1700  -  total flux cleaned = -1.25331e-05 Jy
! Component: 1750  -  total flux cleaned = -4.18218e-05 Jy
! Component: 1800  -  total flux cleaned = -1.22918e-05 Jy
! Component: 1850  -  total flux cleaned = 1.65769e-05 Jy
! Component: 1900  -  total flux cleaned = 1.63818e-05 Jy
! Component: 1950  -  total flux cleaned = -2.57455e-05 Jy
! Component: 2000  -  total flux cleaned = 2.3375e-06 Jy
! Component: 2050  -  total flux cleaned = 1.6132e-05 Jy
! Component: 2100  -  total flux cleaned = -2.48257e-05 Jy
! Component: 2150  -  total flux cleaned = -1.13459e-05 Jy
! Component: 2200  -  total flux cleaned = -3.81533e-05 Jy
! Component: 2250  -  total flux cleaned = 1.83585e-06 Jy
! Component: 2300  -  total flux cleaned = -5.08365e-05 Jy
! Component: 2350  -  total flux cleaned = -2.44331e-05 Jy
! Component: 2400  -  total flux cleaned = -1.1571e-05 Jy
! Component: 2450  -  total flux cleaned = 1.34984e-06 Jy
! Component: 2500  -  total flux cleaned = 1.41653e-05 Jy
! Component: 2550  -  total flux cleaned = 2.68384e-05 Jy
! Component: 2600  -  total flux cleaned = 5.1698e-05 Jy
! Component: 2650  -  total flux cleaned = 1.44189e-05 Jy
! Component: 2700  -  total flux cleaned = -1.00098e-05 Jy
! Component: 2750  -  total flux cleaned = 2.22398e-06 Jy
! Component: 2800  -  total flux cleaned = -9.96268e-06 Jy
! Component: 2850  -  total flux cleaned = -2.19336e-05 Jy
! Component: 2900  -  total flux cleaned = -2.18316e-05 Jy
! Component: 2950  -  total flux cleaned = -4.57144e-05 Jy
! Component: 3000  -  total flux cleaned = -5.7493e-05 Jy
! Component: 3050  -  total flux cleaned = -0.000104223 Jy
! Component: 3100  -  total flux cleaned = -8.09546e-05 Jy
! Component: 3150  -  total flux cleaned = -0.000104056 Jy
! Component: 3200  -  total flux cleaned = -5.81011e-05 Jy
! Component: 3250  -  total flux cleaned = -8.09861e-05 Jy
! Component: 3300  -  total flux cleaned = -0.000115102 Jy
! Component: 3350  -  total flux cleaned = -7.00356e-05 Jy
! Component: 3400  -  total flux cleaned = -0.000103532 Jy
! Component: 3450  -  total flux cleaned = -0.000103466 Jy
! Component: 3500  -  total flux cleaned = -0.000103504 Jy
! Component: 3550  -  total flux cleaned = -0.000147417 Jy
! Component: 3600  -  total flux cleaned = -0.000147446 Jy
! Component: 3650  -  total flux cleaned = -0.000201755 Jy
! Component: 3700  -  total flux cleaned = -0.000212545 Jy
! Component: 3750  -  total flux cleaned = -0.000244791 Jy
! Component: 3800  -  total flux cleaned = -0.000287573 Jy
! Component: 3850  -  total flux cleaned = -0.000266393 Jy
! Component: 3900  -  total flux cleaned = -0.000287379 Jy
! Component: 3950  -  total flux cleaned = -0.000287313 Jy
! Component: 4000  -  total flux cleaned = -0.000297796 Jy
! Component: 4050  -  total flux cleaned = -0.000318583 Jy
! Total flux subtracted in 4096 components = -0.000308282 Jy
! Clean residual min=-0.000590 max=0.000576 Jy/beam
! Clean residual mean=0.000000 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.0451363 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 323 components and 0.0451363 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1514+3046_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.31 x 3.743 at -7.379 degrees (North through East)
! Clean map  min=-0.001447  max=0.044521 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1514+3046_C_map.fits
wmodel /scr/pima/bu007_uvs/J1514+3046_C_map.mod
! Writing 323 model components to file: /scr/pima/bu007_uvs/J1514+3046_C_map.mod
wobs   /scr/pima/bu007_uvs/J1514+3046_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1514+3046_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1514+3046_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J1514+3046_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0445213 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000181742 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.22464 1.22464 2.44929 4.89857 9.79714 19.5943 39.1886 78.3771
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.044 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  244.969 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1514+3046_C_dfm.log closed on Sun Jun 24 02:26:57 2018