! Started logfile: /scr/pima/bu007_uvs/J1501+3046_C_dfm.log on Sun Jun 24 02:26:11 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1501+3046_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1501+3046_C_uva.fits
! AN table 1: 53 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.963522 visibilities/baseline/integration-bin.
! Found source: J1501+3046
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 18384 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1501+3046_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005755Jy  sigma=16.276408
! Fit after  self-cal, rms=0.948572Jy  sigma=15.315165
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=3.472 mas, bpa=1.992 degrees
! Estimated noise=0.64455 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0438581 Jy
! Component: 100  -  total flux cleaned = 0.0534407 Jy
! Total flux subtracted in 100 components = 0.0534407 Jy
! Clean residual min=-0.003927 max=0.004010 Jy/beam
! Clean residual mean=-0.000000 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.0534407 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0534407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090952Jy  sigma=1.370516
! Fit after  self-cal, rms=0.089051Jy  sigma=1.338034
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.33 mas, bmaj=3.667 mas, bpa=2.441 degrees
! Estimated noise=0.333577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00488083 Jy
! Component: 100  -  total flux cleaned = 0.0067969 Jy
! Component: 150  -  total flux cleaned = 0.00784509 Jy
! Component: 200  -  total flux cleaned = 0.00813199 Jy
! Total flux subtracted in 200 components = 0.00813199 Jy
! Clean residual min=-0.002126 max=0.002002 Jy/beam
! Clean residual mean=0.000001 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.0615727 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 26 components and 0.0615727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088824Jy  sigma=1.333272
! Fit after  self-cal, rms=0.088810Jy  sigma=1.333193
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.33 x 3.667 at 2.441 degrees (North through East)
! Clean map  min=-0.0020165  max=0.059302 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.97     KP        0.90     
!   LA        0.98     MK        0.96     NL        1.06     OV        1.02     
!   PT        1.00     SC        0.90     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.12     HN        0.95     KP        0.90     
!   LA        0.90     MK        1.10     NL        0.98     OV        1.04     
!   PT        0.93     SC        1.08     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.01     KP        0.98     
!   LA        0.98     MK        1.08     NL        0.99     OV        0.94     
!   PT        0.98     SC        1.08     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.07     KP        0.96     
!   LA        1.02     MK        1.08     NL        1.02     OV        0.95     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.91     KP        0.99     
!   LA        1.03     MK        1.04     NL        1.02     OV        1.03     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.84     
!   LA        1.10     MK        0.98     NL        1.02     OV        1.10     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.14     HN        0.99     KP        0.84     
!   LA        1.23     MK        0.97     NL        1.05     OV        0.97     
!   PT        0.90     SC        0.92     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.15     HN        0.93     KP        0.91     
!   LA        0.99     MK        1.00     NL        1.05     OV        1.06     
!   PT        0.92     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.088810Jy  sigma=1.333193
! Fit after  self-cal, rms=0.087760Jy  sigma=1.329775
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.333 mas, bmaj=3.672 mas, bpa=2.596 degrees
! Estimated noise=0.330599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195777 Jy
! Component: 100  -  total flux cleaned = -0.00019666 Jy
! Component: 150  -  total flux cleaned = -0.000178835 Jy
! Component: 200  -  total flux cleaned = -0.000179307 Jy
! Total flux subtracted in 200 components = -0.000179307 Jy
! Clean residual min=-0.002016 max=0.001712 Jy/beam
! Clean residual mean=0.000000 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0613934 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 31 components and 0.0613934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087750Jy  sigma=1.329715
! Fit after  self-cal, rms=0.087874Jy  sigma=1.329205
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087874Jy  sigma=1.329205
! Fit after  self-cal, rms=0.087893Jy  sigma=1.329109
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.331 mas, bmaj=3.673 mas, bpa=2.578 degrees
! Estimated noise=0.329533 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220735 Jy
! Component: 100  -  total flux cleaned = -0.000203867 Jy
! Component: 150  -  total flux cleaned = -0.000188759 Jy
! Component: 200  -  total flux cleaned = -0.00016013 Jy
! Total flux subtracted in 200 components = -0.00016013 Jy
! Clean residual min=-0.001966 max=0.001770 Jy/beam
! Clean residual mean=0.000000 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.0612333 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.0612333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087884Jy  sigma=1.329078
! Fit after  self-cal, rms=0.087910Jy  sigma=1.329046
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.62647e-05 Jy
! Component: 100  -  total flux cleaned = 1.65404e-05 Jy
! Component: 150  -  total flux cleaned = 3.47911e-06 Jy
! Component: 200  -  total flux cleaned = 3.84142e-06 Jy
! Total flux subtracted in 200 components = 3.84142e-06 Jy
! Clean residual min=-0.001941 max=0.001777 Jy/beam
! Clean residual mean=0.000000 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0612371 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 37 components and 0.0612371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087906Jy  sigma=1.329011
! Fit after  self-cal, rms=0.087908Jy  sigma=1.329008
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087908Jy  sigma=1.329008
! Fit after  self-cal, rms=0.087504Jy  sigma=1.328986
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.329 mas, bmaj=3.672 mas, bpa=2.529 degrees
! Estimated noise=0.327727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000232813 Jy
! Component: 100  -  total flux cleaned = -0.000233865 Jy
! Component: 150  -  total flux cleaned = -0.000221518 Jy
! Component: 200  -  total flux cleaned = -0.00022112 Jy
! Total flux subtracted in 200 components = -0.00022112 Jy
! Clean residual min=-0.001914 max=0.001782 Jy/beam
! Clean residual mean=0.000000 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.061016 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.061016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087498Jy  sigma=1.328978
! Fit after  self-cal, rms=0.087504Jy  sigma=1.328972
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.96543e-05 Jy
! Component: 100  -  total flux cleaned = 1.83724e-05 Jy
! Component: 150  -  total flux cleaned = 7.94146e-06 Jy
! Component: 200  -  total flux cleaned = 8.01488e-06 Jy
! Total flux subtracted in 200 components = 8.01488e-06 Jy
! Clean residual min=-0.001910 max=0.001789 Jy/beam
! Clean residual mean=0.000000 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.061024 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.061024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087501Jy  sigma=1.328946
! Fit after  self-cal, rms=0.087503Jy  sigma=1.328944
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087503Jy  sigma=1.328944
! Fit after  self-cal, rms=0.087004Jy  sigma=1.328927
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.544 mas, bmaj=4.792 mas, bpa=-1.347 degrees
! Estimated noise=0.459864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000429762 Jy
! Component: 100  -  total flux cleaned = -0.00040045 Jy
! Component: 150  -  total flux cleaned = -0.000388269 Jy
! Component: 200  -  total flux cleaned = -0.000377665 Jy
! Total flux subtracted in 200 components = -0.000377665 Jy
! Clean residual min=-0.002559 max=0.002268 Jy/beam
! Clean residual mean=0.000001 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.0606463 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 44 components and 0.0606463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087009Jy  sigma=1.328956
! Fit after  self-cal, rms=0.087004Jy  sigma=1.328925
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.2838e-05 Jy
! Component: 100  -  total flux cleaned = -7.19158e-05 Jy
! Component: 150  -  total flux cleaned = -6.24574e-05 Jy
! Component: 200  -  total flux cleaned = -6.22416e-05 Jy
! Total flux subtracted in 200 components = -6.22416e-05 Jy
! Clean residual min=-0.002557 max=0.002250 Jy/beam
! Clean residual mean=0.000001 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.0605841 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 47 components and 0.0605841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087008Jy  sigma=1.328992
! Fit after  self-cal, rms=0.087003Jy  sigma=1.328976
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.327 mas, bmaj=3.672 mas, bpa=2.481 degrees
! Estimated noise=0.325769 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.327 x 3.672 at 2.481 degrees (North through East)
! Clean map  min=-0.0017331  max=0.057567 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.055 mas, bmaj=3.473 mas, bpa=2.104 degrees
! Estimated noise=0.612951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0443099 Jy
! Component: 100  -  total flux cleaned = 0.0539843 Jy
! Component: 150  -  total flux cleaned = 0.0562584 Jy
! Component: 200  -  total flux cleaned = 0.0575044 Jy
! Total flux subtracted in 200 components = 0.0575044 Jy
! Clean residual min=-0.003317 max=0.003257 Jy/beam
! Clean residual mean=0.000000 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.0575044 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0575044 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.327 mas, bmaj=3.672 mas, bpa=2.481 degrees
! Estimated noise=0.325769 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172077 Jy
! Component: 100  -  total flux cleaned = 0.00260004 Jy
! Component: 150  -  total flux cleaned = 0.0028172 Jy
! Component: 200  -  total flux cleaned = 0.00291812 Jy
! Total flux subtracted in 200 components = 0.00291812 Jy
! Clean residual min=-0.001953 max=0.001804 Jy/beam
! Clean residual mean=0.000000 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0604225 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 0.0604225 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.544 mas, bmaj=4.792 mas, bpa=-1.347 degrees
! Estimated noise=0.459864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115295 Jy
! Component: 100  -  total flux cleaned = -2.39835e-05 Jy
! Component: 150  -  total flux cleaned = 4.51769e-05 Jy
! Component: 200  -  total flux cleaned = 9.88265e-05 Jy
! Total flux subtracted in 200 components = 9.88265e-05 Jy
! Clean residual min=-0.002552 max=0.002234 Jy/beam
! Clean residual mean=0.000001 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.0605213 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.11314e-05 Jy
! Component: 100  -  total flux cleaned = 6.62792e-05 Jy
! Component: 150  -  total flux cleaned = 7.38698e-05 Jy
! Component: 200  -  total flux cleaned = 8.10008e-05 Jy
! Total flux subtracted in 200 components = 8.10008e-05 Jy
! Clean residual min=-0.002543 max=0.002235 Jy/beam
! Clean residual mean=0.000001 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.0606023 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.0606023 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.327 mas, bmaj=3.672 mas, bpa=2.481 degrees
! Estimated noise=0.325769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033498 Jy
! Component: 100  -  total flux cleaned = 0.000202439 Jy
! Component: 150  -  total flux cleaned = 0.000132796 Jy
! Component: 200  -  total flux cleaned = 0.000107203 Jy
! Total flux subtracted in 200 components = 0.000107203 Jy
! Clean residual min=-0.001930 max=0.001786 Jy/beam
! Clean residual mean=0.000000 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0607095 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.0607095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086992Jy  sigma=1.328965
! Fit after  self-cal, rms=0.086993Jy  sigma=1.328941
wmodel J1501+3046_C_map.mod
! Writing 47 model components to file: J1501+3046_C_map.mod
wobs   J1501+3046_C_uvs.fits
! Writing UV FITS file: J1501+3046_C_uvs.fits
wwins  J1501+3046_C_map.win
! wwins: Wrote 1 windows to J1501+3046_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000445075 Jy
! Component: 100  -  total flux cleaned = -0.000810294 Jy
! Component: 150  -  total flux cleaned = -0.000925062 Jy
! Component: 200  -  total flux cleaned = -0.00106192 Jy
! Component: 250  -  total flux cleaned = -0.00116778 Jy
! Component: 300  -  total flux cleaned = -0.00139785 Jy
! Component: 350  -  total flux cleaned = -0.0016199 Jy
! Component: 400  -  total flux cleaned = -0.0018116 Jy
! Component: 450  -  total flux cleaned = -0.00195114 Jy
! Component: 500  -  total flux cleaned = -0.00199701 Jy
! Component: 550  -  total flux cleaned = -0.00208648 Jy
! Component: 600  -  total flux cleaned = -0.00204284 Jy
! Component: 650  -  total flux cleaned = -0.00206415 Jy
! Component: 700  -  total flux cleaned = -0.00202211 Jy
! Component: 750  -  total flux cleaned = -0.00204273 Jy
! Component: 800  -  total flux cleaned = -0.00208305 Jy
! Component: 850  -  total flux cleaned = -0.00212288 Jy
! Component: 900  -  total flux cleaned = -0.00214226 Jy
! Component: 950  -  total flux cleaned = -0.00220044 Jy
! Component: 1000  -  total flux cleaned = -0.00223878 Jy
! Component: 1050  -  total flux cleaned = -0.00233275 Jy
! Component: 1100  -  total flux cleaned = -0.00235104 Jy
! Component: 1150  -  total flux cleaned = -0.00240604 Jy
! Component: 1200  -  total flux cleaned = -0.00251396 Jy
! Component: 1250  -  total flux cleaned = -0.00253149 Jy
! Component: 1300  -  total flux cleaned = -0.00258456 Jy
! Component: 1350  -  total flux cleaned = -0.00261952 Jy
! Component: 1400  -  total flux cleaned = -0.00270546 Jy
! Component: 1450  -  total flux cleaned = -0.00278987 Jy
! Component: 1500  -  total flux cleaned = -0.00277323 Jy
! Component: 1550  -  total flux cleaned = -0.00278971 Jy
! Component: 1600  -  total flux cleaned = -0.00280626 Jy
! Component: 1650  -  total flux cleaned = -0.00282219 Jy
! Component: 1700  -  total flux cleaned = -0.00280604 Jy
! Component: 1750  -  total flux cleaned = -0.00282202 Jy
! Component: 1800  -  total flux cleaned = -0.00282207 Jy
! Component: 1850  -  total flux cleaned = -0.00282203 Jy
! Component: 1900  -  total flux cleaned = -0.00282195 Jy
! Component: 1950  -  total flux cleaned = -0.00280658 Jy
! Component: 2000  -  total flux cleaned = -0.00280659 Jy
! Component: 2050  -  total flux cleaned = -0.00279148 Jy
! Component: 2100  -  total flux cleaned = -0.0028213 Jy
! Component: 2150  -  total flux cleaned = -0.00276218 Jy
! Component: 2200  -  total flux cleaned = -0.00271832 Jy
! Component: 2250  -  total flux cleaned = -0.002704 Jy
! Component: 2300  -  total flux cleaned = -0.00268973 Jy
! Component: 2350  -  total flux cleaned = -0.00270391 Jy
! Component: 2400  -  total flux cleaned = -0.00267551 Jy
! Component: 2450  -  total flux cleaned = -0.00263324 Jy
! Component: 2500  -  total flux cleaned = -0.00263323 Jy
! Component: 2550  -  total flux cleaned = -0.00264716 Jy
! Component: 2600  -  total flux cleaned = -0.00267481 Jy
! Component: 2650  -  total flux cleaned = -0.00268848 Jy
! Component: 2700  -  total flux cleaned = -0.00271567 Jy
! Component: 2750  -  total flux cleaned = -0.00268853 Jy
! Component: 2800  -  total flux cleaned = -0.00268846 Jy
! Component: 2850  -  total flux cleaned = -0.00271515 Jy
! Component: 2900  -  total flux cleaned = -0.00272845 Jy
! Component: 2950  -  total flux cleaned = -0.00274174 Jy
! Component: 3000  -  total flux cleaned = -0.00270264 Jy
! Component: 3050  -  total flux cleaned = -0.00270277 Jy
! Component: 3100  -  total flux cleaned = -0.00266414 Jy
! Component: 3150  -  total flux cleaned = -0.00274121 Jy
! Component: 3200  -  total flux cleaned = -0.00271556 Jy
! Component: 3250  -  total flux cleaned = -0.00269019 Jy
! Component: 3300  -  total flux cleaned = -0.00271518 Jy
! Component: 3350  -  total flux cleaned = -0.00269013 Jy
! Component: 3400  -  total flux cleaned = -0.0027026 Jy
! Component: 3450  -  total flux cleaned = -0.0027148 Jy
! Component: 3500  -  total flux cleaned = -0.00269017 Jy
! Component: 3550  -  total flux cleaned = -0.00265363 Jy
! Component: 3600  -  total flux cleaned = -0.00262936 Jy
! Component: 3650  -  total flux cleaned = -0.002714 Jy
! Component: 3700  -  total flux cleaned = -0.00270199 Jy
! Component: 3750  -  total flux cleaned = -0.0027379 Jy
! Component: 3800  -  total flux cleaned = -0.00272608 Jy
! Component: 3850  -  total flux cleaned = -0.00274967 Jy
! Component: 3900  -  total flux cleaned = -0.00273776 Jy
! Component: 3950  -  total flux cleaned = -0.0027612 Jy
! Component: 4000  -  total flux cleaned = -0.00274951 Jy
! Component: 4050  -  total flux cleaned = -0.00277263 Jy
! Total flux subtracted in 4096 components = -0.00276115 Jy
! Clean residual min=-0.000650 max=0.000629 Jy/beam
! Clean residual mean=0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0579484 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 353 components and 0.0579484 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1501+3046_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.327 x 3.672 at 2.481 degrees (North through East)
! Clean map  min=-0.0014973  max=0.057638 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1501+3046_C_map.fits
wmodel /scr/pima/bu007_uvs/J1501+3046_C_map.mod
! Writing 353 model components to file: /scr/pima/bu007_uvs/J1501+3046_C_map.mod
wobs   /scr/pima/bu007_uvs/J1501+3046_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1501+3046_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1501+3046_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J1501+3046_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0576378 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000196672 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.02366 1.02366 2.04732 4.09464 8.18929 16.3786 32.7571 65.5143
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  293.065 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1501+3046_C_dfm.log closed on Sun Jun 24 02:26:15 2018